From: Fabian Herschel (fabian.herschel_at_suse.de)
Date: Mon Oct 14 2002 - 17:31:39 CEST
From: Fabian Herschel <fabian.herschel@suse.de> Date: Mon, 14 Oct 2002 17:31:39 +0200 Message-Id: <02101417313902.01419@grimsel> Subject: Re: [alice] problems with mylex-raid
On Monday 14 October 2002 16:43, Stefan Weigel wrote:
> Hi!
> I have a problem with the mylex raid-controller. I've installed a system
> manually and found out, that I have the following partitions:
>
> disk:
> /dev/rd/c0d0
> partitions:
> /dev/rd/c0d0p1
> /dev/rd/c0d0p2
> and so on...
>
> How can I tell, that the partitioner should use this partitions instead of
> /dev/hda. I tried:
>
> <SYS_PART_c0d0>
Yes, because yast1 could not now that the correct path is
/dev/rd/c0d0
For this case we had add the directive "path". This directive gives you
the chance to point on any device or file. It must be in the first line of
SYS_PART_any_name
Example:
<SYS_PART_mylex>
path=/dev/rd/c0d0
....
</SYS_PART_mylex>
Best regards
Fabian Herschel
>
> but this doesn't work.
> Another problem. In the manual is an example (4.3):
>
> RC_CONFIG_0 INITRD_MODULES DAC960
>
> Is it possible to define this in the Alice-Scripts ??
Use <SYS_INSMOD_MODULES>.
>
>
> Best regards
>
> Stefan Weigel
>
>
> --
> To unsubscribe, e-mail: alice-unsubscribe@suse.com
> For additional commands, e-mail: alice-help@suse.com
-- <Fabian.Herschel@suse.de> SuSE Linux Solutions AG * Mergenthalerallee 45-47 * D-65760 Eschborn Tel: +49-6196-50951-23 * Fax: +49-6196-409-607 http://www.suse.de * Alice Homepage: http://www.suse.de/~fabian
This archive was generated by hypermail 2.1.7 : Wed Jun 25 2003 - 22:20:23 CEST