Re: [suse-axp] install problem cont'd

From: Ruediger Oertel (ro@suse.de)
Date: Mon Sep 27 1999 - 09:09:23 PDT

  • Next message: alex@chem.ufl.edu: "Re: [suse-axp] install problem cont'd"

    Date: 27 Sep 1999 18:09:23 +0200
    Message-ID: <Pine.LNX.4.10.9909271803320.21518-100000@fatou.suse.de>
    From: "Ruediger Oertel" <ro@suse.de>
    Subject: Re: [suse-axp] install problem cont'd
    

    Hi,

    sorry, but this sounds like my mistake: the aboot image contains
    a kernel that does not support TGA cards (I guess that is what your
    system is running).

    I just put an updated image to
       ftp://ftp.suse.com/pub/suse/axp/update/6.1/disks

    Hope this helps.

    On Mon, 27 Sep 1999 alex@chem.ufl.edu wrote:

    > Hi list,
    >
    > thanks for the helpful comments I got so far. They inched me a little
    > bit closer to get SuSE 6.1 installed. After booting with -fl 0 enabled
    > I get the following messages:
    >
    > (boot dva0.0.0.0.1 -flags 0)
    > block 0 of dva0.0.0.0.1 is a valid boot block
    > reading 216 blocks from dva0.0.0.0.1
    > bootstrap code read in
    > base = 148000, image_start = 0, image_bytes = 1b000
    > Initializing HWRPB at 2000
    > Initializing page table at 13a000
    > Initializing machine state
    > setting affinity to the primary CPU
    > jumping to bootstrap code
    > aboot: Linux/Alpha SRM bootloader version 0.5
    > aboot: switching to OSF/1 PALcode version 1.35
    > aboot: no disklabel found
    > aboot: booted_dev=`dva 1 0 0 0 0 0 0'. guessing boot_device=`fd0'
    > aboot: loading compressed /vmlinux.gz...
    > aboot: ok, now starting the kernel...
    >
    > After this the machine reads from the floppy for a little while, hangs,
    > i.e., just sits there apparently doing nothing for half an hour by now.
    > So, something must be wrong. I tried to swap the diskette to the
    > install diskette (suggested by the manual on page 17) even though aboot
    > didn't prompt me to, with no result.
    >
    > I guess, my questions are the following:
    > 1. does this look like a hardware problem?
    > 2. if aboot is just waiting for the install diskette, how do I tell it
    > that it is in the drive after I swap?
    > 3. would it be possible at this point to boot from the CD? If so, what
    > flags would be needed?
    > 4. In order to educate myself better on the boot process, can someone
    > give me a pointer to the inner workings, man page, docs, etc. of aboot?
    > Obviously I don't have the machine up and running so can't use it to
    > look into the man pages.
    >
    > Thanks for your help, Alex.
    >
    >

    -- 
    with kind regards (mit freundlichem Grinsen),
                                         Ruediger Oertel (ro@suse.de)
    -----------------------------------------------------------------
    Linux 2.2.12.SuSE (root@fatou) (gcc version egcs-2.91.66 ) #1 SMP
           Total of 2 processors activated (800.36 BogoMIPS)
    



    This archive was generated by hypermail 2.1.0 : Mon Jun 04 2001 - 04:17:22 PDT