SV: [suse-axp] Building kernel for both ARC and SRM

From: Lennart Börjeson (LennartB@cinnober.com)
Date: Fri Feb 04 2000 - 02:07:22 PST

  • Next message: Maz Spork: "RE: [suse-axp] 6.1 big freeze accessing /dev/ttyS2" 

    Message-ID: <E536C8EE2A1FD31195370008C79FFA1F0C653C@world.cinnober.com>
From: Lennart Börjeson <LennartB@cinnober.com>
Date: Fri, 4 Feb 2000 11:07:22 +0100 
Subject: SV: [suse-axp] Building kernel for both ARC and SRM

    Platform specific, Avanti.

    (I confess my ignorance and that I'm meddling with powers I can't control...
    ;-) )

    -----Ursprungligt meddelande-----
    Från: Ruediger Oertel [mailto:ro@suse.de]
    Skickat: den 4 februari 2000 11:00
    Till: Lennart Börjeson
    Kopia: Suse-Axp (E-mail)
    Ämne: Re: [suse-axp] Building kernel for both ARC and SRM

    On Fri, 4 Feb 2000, Lennart Börjeson wrote:

    > I've successfully built a 6.3 kernel for my AS200 (to include COFF and
    > instruction emulation), one for ARC boot, one for SRM boot, but I've
    failed
    > building a kernel which can boot under both.
    >
    > The only config-parameter I'm toggling is the SRM parameter.
    >
    > If set, the kernel hangs at boot under ARC after accessing the RTC, but
    > boots OK under SRM.
    > If clear, the kernel hangs at boot under SRM when scanning the SCSI
    devices,
    > but boots OK under ARC.
    >
    > Any hints?
    Hm, are you building for "generic" or platform specific ? 

    -- 
with kind regards (mit freundlichem Grinsen),
                              Ruediger Oertel (ro@suse.de)
----------------------------------------------------------
          does "DONT PANIC" give a hint ?

    This archive was generated by hypermail 2.1.0 : Mon Jun 04 2001 - 04:17:49 PDT