Re: [suse-axp] Upgrade SuSE 6.1 -> 7.0 on AS 200 4/166

From: Stefan Fent (sf@suse.de)
Date: Thu Jan 11 2001 - 09:09:40 PST

  • Next message: Mark Hounschell: "Compatable video card?"

    Date: Thu, 11 Jan 2001 18:09:40 +0100 (CET)
    From: Stefan Fent <sf@suse.de>
    Message-ID: <Pine.LNX.4.21.0101111752231.9402-100000@d150.suse.de>
    Subject: Re: [suse-axp] Upgrade SuSE 6.1 -> 7.0 on AS 200 4/166
    

    On Thu, 11 Jan 2001, Joerg Bruehe wrote:

    > Date: Thu, 11 Jan 2001 17:20:35 +0100
    > From: Joerg Bruehe <joerg@sql.de>
    > To: "Alpha Linux (SuSE)" <suse-axp@suse.com>
    > Subject: [suse-axp] Upgrade SuSE 6.1 -> 7.0 on AS 200 4/166
    >
    > Dear SuSE-AXP users,
    >
    > I am going to do this upgrade in the next days.
    >
    > 1) To prepare for it, I wanted to check the SDB at the URL
    > given in the 7.0 book:
    > http://sdb.suse.de/sdb/de/html/bugs70axp.html
    > However, this address is not working - just a typo,
    > or a severe problem ?
    > (The "errata" page does not mention anything relevant ...)

    No, these article just don't exist at the moment.

    >
    > 2) The machine boots via ARC / Alpha-BIOS, no SRM installed.
    > Is there any need to change to SRM ?
    >
    No, should work with milo as well, but as I don't know wether Milo-2.2
    works on Avanti, you may have to use the disks in unsorted/disks-2.0
    with Milo-2.0.35

    > 3) I would prefer to do an upgrade, not a new installation.
    > (Yes, I did my full tape backup before ...)
    > Are there any known problems ?
    >

    I don't know. (But the backup is anyways a good idea), I never tried that.

    > 4) Can / should I go from 6.1 to 7.0 directly,
    > or should I do 6.1 -> 6.3 and 6.3 -> 7.0 as separate steps ?
    >

    can't say :( I only made updates from 6.4 to 7.0, w/o problems).

    > 5) The SDB mentions an error on page 20, the "initrd" parameter
    > is missing for the installation "milo".

    Yes, this is true, the "OS Options" need "initrd=/etc/initdisk.gz" as
    additional parameter.
    >
    > My understanding is that this parameter is required only
    > for initial installation boot - does it also apply to the
    > upgrade and/or the later installed kernel ?

    No, it's needed just to boot for installation.

    >
    > Thank you for all hints,
    > Joerg Bruehe
    >

    Mit freundlichen Grüssen / With kind regards,

            Stefan Fent

    --
    SuSE GmbH,             Tel:   +49-911-7405331 
    Schanzaeckerstr. 10,   Fax:   +49-911-3206727
    90443 Nuernberg,       Email: sf@suse.de
    Germany                WWW:   http://www.suse.de
    



    This archive was generated by hypermail 2.1.0 : Mon Jun 04 2001 - 04:18:39 PDT