From: Juergen Bierlein <jb@rhein-neckar.netsurf.de> Date: Wed, 6 Jun 2001 21:49:41 +0200 Message-Id: <01060621494100.01623@a500> Subject: [suse-axp] SuSE 7.1axp and Milo 2.2 / Matrox Millenium I
Hi,
i have an PC164 Board with 256MB RAM and a 21164A CPU (console is an ARC).
When trying to boot Milo 2.2 deliverd with SuSE 7.1axp the following happens:
Linux Loader V1.5
...
System Partition is OSLOADPARTITION=scsi(0)disk(0)rdisk(0)partition(1)
Load File name is OSLOADFILENAME=\os\linux\milo22
Load Path is scsi(0)disk(0)rdisk(0)partition(1)\os\linux\milo22
OSLOADOPTIONS=boot sda2:vm_24.gz root=/dev/sdb2
Opening file scsi(0)disk(0)rdisk(0)partition(1)\os\linux\milo22 ...
Loading file at 0x80000000 ...
Getting firmware parameters ...
... Memory size is 0x10000000 bytes
Setting up arguments for Milo @ 0x801FFC00
Setting up memory size for Milo @ 0x801FFE00
Setting up memory size for Milo @ 0x801FFF00
Swapping to PALcode ar 0x0 ...
Ok i renamed the milo to milo22 to be able to boot the old milo.
And then the machine hung completely (for at least 5 Minutes ;)
I then tried to use milo from /cdrom/unsorted/disks-2.0/PC164
Additionally the install image from that directory contain kernelmodules for
the 2.2.16 Kernel and not 2.2.19. Therefor i used /cdrom/disks/install.
With milo 2.0.35 i was able to install SuSE 7.1axp (thats where i am writing
this mail :)
But i am still not able to run the 2.4.4 Kernel (may be it is because milo
2.2 is not running).
Any hints to get 2.4.4 booted ?
I also tried Xfree86 4.0.2 but it seems really unstable for the Matrox
Millenium I 8MB in True ColorMode (24 Bit). I went back to Xfree86 3.3.6 (in
32 Bit Mode).
Does anybody else had the same experience with this card ?
Greets,
Juergen
-- EMail: jb@rhein-neckar.netsurf.deThe sun shines on my way, every night and every day. :-))
This archive was generated by hypermail 2.1.0 : Wed Jun 06 2001 - 13:16:25 PDT