[suse-sles-e] SLES9: how to recognize SCSI LUNs >= 8?

From: Michael Behrens (behrens_at_prostep.com)
Date: Thu Jan 20 2005 - 17:27:37 CET

Next message: tshilson_at_mmm.com: "Fw: [suse-sles-e] Empty subscriber list?"
Previous message: Ajay Mulwani: "[suse-sles-e] Fwd: /net/hostname with NIS on SLES9."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Message-ID: <41EFDBF9.1090804@prostep.com>
Date: Thu, 20 Jan 2005 17:27:37 +0100
From: Michael Behrens <behrens@prostep.com>
Subject: [suse-sles-e] SLES9: how to recognize SCSI LUNs >= 8?

Hi all,

I have set up a SLES9 (for IA64) on a DELL 1850 hardware, which has to
be connected to a HP EVA3000 SAN via two Qlogic HBAs ql2342.

The shipped drivers for the Qlogic HBAs work fine, I'm just not able
to recognize virtual disks presented with LUNs >= 8.

I tried the parameters "max_luns=128" and "max_reported_luns=128" for
module "scsi_mod" both in /etc/modprobe.conf.local and in
/boot/grub/menu.lst, but still only LUNs < 8 are recognized by the driver.

/proc/cmdline contains:

root=/dev/sda6 max_luns=128 max_report_luns=128 vga=0x317 selinux=0
console=tty0 resume=/dev/sda2 elevator=cfq splash=silent

Does anybody know how i can make the SLES9 to recognize LUNs >= 8?

-- 
Gruß
Michael
---------------------------------------------------------------------
To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
For additional commands, e-mail: suse-sles-e-help@suse.com

Next message: tshilson_at_mmm.com: "Fw: [suse-sles-e] Empty subscriber list?"
Previous message: Ajay Mulwani: "[suse-sles-e] Fwd: /net/hostname with NIS on SLES9."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Thu Jan 20 2005 - 17:27:48 CET