RE: [suse-sles-e] SLES-9 Install on Dell 2850, no root device

From: Black, Alain (ablack_at_bloodsystems.org)
Date: Thu May 04 2006 - 17:59:33 CEST


Date: Thu, 4 May 2006 08:59:33 -0700
Message-ID: <1066BDF1DAAA8040B54E0B5E270973100D4B241B@bsimail.bloodsystems.org>
From: "Black, Alain" <ablack@bloodsystems.org>
Subject: RE: [suse-sles-e] SLES-9 Install on Dell 2850, no root device

I saw that with my Areca RAID card if I let YAST install a new kernel.
I am booting off of the raid set and so need the driver loaded at boot
time. Mine was missing. Boot off of the rescue disk and build a
kernel, making sure to follow the instructions for the PERC card.

Now, if you're not booting off of the raid card, then I have no idea.

-Alain.

> -----Original Message-----
> From: Ron Joffe [mailto:rjoffe@yahoo.com]
> Sent: Thursday, May 04, 2006 7:49 AM
> To: suse-sles-e@suse.com
> Subject: [suse-sles-e] SLES-9 Install on Dell 2850, no root device
>
> I have submitted this same issue to Novell support (After figuring out
> their
> very poorly designed service request form).
>
> Perhaps someone on the list has a suggestion as well ?
>
>
> SLES-9 SP3 32 bit
> Server:
> Dell 2850
> Perc 4/Di controller - Single Raid 1 Partition
> Dual Xeon 3.4
> 4GB Ram
>
> Install, standard install.
> Partitions:
> /dev/sda1 - 100Meg ext2 /boot
> /dev/sda2 - 2GB SWAP
> /dev/sda3 - 5 GB /
> Install went just fine, after package load, system reboots. On reboot,
> console
> displays:
> Loading kernal/fs/reiserfs/reiserfs.ko
> waiting for device /dev/sda3 ro appear: ....not found -- device nodes:
> long list of device nodes (tty's,pty's, etc)
> No root device found: exiting to /bin/sh
>
> I can boot via rescue disk, and easily mount /dev/sda3 to /mnt and
> /dev/sda1
> to /mnt/boot.
>
> I have chrooted in the rescue mode to /mnt and ran yast to apply all
> latest
> patches (including kernel). This did not help the configuration.
>
> I have gone into the bios and changed all disk and boot settings a
number
> of
> different formats, this did not help either.
>
> Any suggestions?
>
> Thanks,
>
> Ron
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
> For additional commands, e-mail: suse-sles-e-help@suse.com

---------------------------------------------------------------------
To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
For additional commands, e-mail: suse-sles-e-help@suse.com



This archive was generated by hypermail 2.1.7 : Thu May 04 2006 - 17:59:44 CEST