From: Xyber Blue (xyberblue_at_gmail.com)
Date: Tue Nov 28 2006 - 04:45:02 CET
Message-ID: <45ea3f390611271945m17f3f864g870101d6f7a20be@mail.gmail.com> Date: Tue, 28 Nov 2006 11:45:02 +0800 From: "Xyber Blue" <xyberblue@gmail.com> Subject: [suse-sles-e] Multipathing on SUSE 9.3
Hi,
I need help on enabling multipath on my SUSE 9.3.
OS : SUSE 9.3
Multipath tool : multipath-tools-0.4. 0
Fiber Channel Adapter : QLogic PCI to Fibre Channel Host Adapter for QLA2342:
Firmware version 3.03.08 IPX,
Driver version 8.00.02b4-k
Storage Subsystem : vendor = ADTX
model = AXRR-LH000FF-DEE
My system already detected 2 devices /dev/sda and /dev/sdb
I know this storage subsystem is new and might require more
configurations for multipath.
I just successfully installed multipath tools and did some steps.
I did the following configurations
1) Edited multipath.conf and add the above device.
2) edited /etc/sysconfig/kernel and follow some steps on this site
http://support.novell.com/techcenter/sdb/en/2005/04/sles_multipathing.html
3) issuing multipath -v2 -d command display no output even error messages.
The question is how to enable multipath tools on the said machine? Is
their anything I missed on the said configuration? BTW, this part of
/etc/sysconfig/kernel
INITRD_MODULES="cciss reiserfs qla2xxx"
I didn't add cciss because in the example, it is intended only for
compaq machine raid subsystems.
-- If you want to become somebody Display your best ability --------------------------------------------------------------------- To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com For additional commands, e-mail: suse-sles-e-help@suse.com
This archive was generated by hypermail 2.1.7 : Tue Nov 28 2006 - 06:48:54 CET