fpoeta_at_pandminc.com
Date: Thu Sep 07 2006 - 15:21:24 CEST
Message-ID: <OFAA340950.6AEF318F-ON852571E2.00476A16-852571E2.0049687D@titian.com> From: fpoeta@pandminc.com Date: Thu, 7 Sep 2006 09:21:24 -0400 Subject: Re: [suse-sles-e] delete qla2300
The command you issued is very disruptive. First find out which file
systems are host on the qla3200. You can look in the /etc/fstab and unless
your server boot from the SAN the device will be something other than
/dev/sda. I ma going out on a limb here since I have no idea of the server
hardware you have and if you have LVs than this approach will not help.
You might be better off first checking YaST..Hardware..Hardware Info under
qla3200 to see which devices are controlled by it.
After
You must first make sure that no files are open on the file systems that
are on the qla3200 controller. if the file systems below are all on the
qla3200 you could use lsof | grep dept proj.... etc. you might also use
ps -ef | grep dept ....etc. finally make sure you do not have a terminal
open and on one of the file systems execute pwd to find out.
Francis Poeta
President
P & M Computers, Inc.
An IBM Advanced Business Partner
201-943-0353(v)
201-943-0227(f)
Anna Bell <anna5bell@yahoo.com>
09/07/2006 01:46 AM
To
fpoeta@pandminc.com
cc
suse-sles-e@suse.com
Subject
Re: [suse-sles-e] delete qla2300
how is it work, please??
[root@fj114043 root]# umount -a
umount: /dept: device is busy
umount: /proj: device is busy
umount: /stage: device is busy
umount: /users: device is busy
umount: /backup: device is busy
umount: /import: device is busy
umount: /buildblr: device is busy
umount: /buildsjc: device is busy
umount: /departments: device is busy
umount: /dev/pts: device is busy
umount: /: device is busy
[root@fj114043 root]#
fpoeta@pandminc.com wrote:
You must umount the disk that are attached to the fibre channel adapter.
Francis Poeta
President
P & M Computers, Inc.
An IBM Advanced Business Partner
201-943-0353(v)
201-943-0227(f)
Anna Bell
09/06/2006 10:35 PM
To
suse-sles-e@suse.com
cc
Subject
[suse-sles-e] delete qla2300
Please help!!
I want to delete qla2300 but it's complaining that it was busy. How can
i make it unbusy.
thanks,
-anna
Red Hat Enterprise Linux AS release 3 (Taroon Update 5)
Kernel 2.4.21-32.ELsmp on an i686
This system has been ETSified.
login: root
Password:
Last login: Wed Sep 6 19:31:00 on :0
[root@fj114043 root]#
[root@fj114043 root]#
[root@fj114043 root]#
[root@fj114043 root]# lsmod
Module Size Used by Not tainted
ide-cd 34016 0 (autoclean)
cdrom 32896 0 (autoclean) [ide-cd]
radeon 114628 1
audit 90808 2 (autoclean)
nfsd 86160 8 (autoclean)
lockd 59600 1 (autoclean) [nfsd]
sunrpc 89244 1 (autoclean) [nfsd lockd]
usbserial 23868 0 (autoclean) (unused)
lp 9156 0 (autoclean)
parport 38848 0 (autoclean) [lp]
autofs4 16856 9 (autoclean)
e1000 78652 1
floppy 57520 0 (autoclean)
sg 37388 0 (autoclean)
microcode 6912 0 (autoclean)
keybdev 2944 0 (unused)
mousedev 5656 1
hid 22532 0 (unused)
input 6176 0 [keybdev mousedev hid]
ehci-hcd 20776 0 (unused)
usb-uhci 26860 0 (unused)
usbcore 81152 1 [usbserial hid ehci-hcd usb-uhci]
ext3 89960 2
jbd 55156 2 [ext3]
ata_piix 5320 3
scsi_dump_register 2368 0 [ata_piix]
libata 46652 0 [ata_piix]
qla2300 696316 5
sd_mod 14128 6
scsi_mod 115496 4 [sg ata_piix libata qla2300 sd_mod]
[root@fj114043 root]# rmmod qla2300
qla2300: Device or resource busy
[root@fj114043 root]# modprobe -r qla2300
qla2300: Device or resource busy
[root@fj114043 root]#
---------------------------------
How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone call
rates.
---------------------------------
How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone call
rates.
This archive was generated by hypermail 2.1.7 : Thu Sep 07 2006 - 15:22:05 CEST