From: Black, Alain (ablack_at_bloodsystems.org)
Date: Wed May 09 2007 - 19:10:11 CEST
Date: Wed, 9 May 2007 10:10:11 -0700 Message-ID: <1066BDF1DAAA8040B54E0B5E2709731017FF0853@bsimail.bloodsystems.org> From: "Black, Alain" <ablack@bloodsystems.org> Subject: RE: [suse-sles-e] "there is less than 96 MB memory or the X server could not be started" on an HP DL360 G5
I haven't had to run sax2 after the install; it's just worked on first
boot with the six HP DL585 G2's. Other systems may be different of
course.
We're doing three 32bit installs and the other three 64bit and both
installs have been the same.
-Alain
-----Original Message-----
From: Alexei_Roudnev [mailto:Alexei_Roudnev@exigengroup.com]
Sent: Tuesday, May 08, 2007 10:35 AM
To: Cristian Veronesi; SLES List
Subject: Re: [suse-sles-e] "there is less than 96 MB memory or the X
server could not be started" on an HP DL360 G5
It is a very common problem, so really follow this advise (install in
text
and then try sax2 +V X mode).
----- Original Message -----
From: "Cristian Veronesi" <c.veronesi@crpa.it>
To: "SLES List" <suse-sles-e@suse.com>
Sent: Tuesday, May 08, 2007 12:01 AM
Subject: Re: [suse-sles-e] "there is less than 96 MB memory or the X
server
could not be started" on an HP DL360 G5
> Black, Alain wrote:
>
> > I had the same problems with my new DL585 G2's with 48GB of memory
in
> > them. I just did the install using the text screens and then it
used
> > the graphical desktop on the first boot.
> >
> > I was booting off of the SP3 CD to start the install.
>
> Me too. It's stange because the ATI ES1000 support was introduced
before
> SP3, I thought it was included in it. But I will follow your advice, I
> will install in text mode and see what it happens at the first boot.
>
> Thank you. Kind regards,
>
> --
> Cristian Veronesi - C.R.P.A. S.p.A. - Reggio Emilia, Italy
>
> You ain't seen evil until you've seen premature UNoptimization!
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
> For additional commands, e-mail: suse-sles-e-help@suse.com
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
For additional commands, e-mail: suse-sles-e-help@suse.com
---------------------------------------------------------------------
To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
For additional commands, e-mail: suse-sles-e-help@suse.com
This archive was generated by hypermail 2.1.7 : Wed May 09 2007 - 21:16:44 CEST