From: Reinhard Weh (reinhard.weh_at_sagebaeurer.de)
Date: Thu May 24 2007 - 14:02:18 CEST
From: "Reinhard Weh" <reinhard.weh@sagebaeurer.de> Date: Thu, 24 May 2007 14:02:18 +0200 Message-ID: <001b01c79dfb$60674040$2861480a@client.ds> Subject: [suse-sles-e] Compaq Smart Array on SLES9 status
Hello,
we use some HP/Compaq Smart Array RAID Controller und SLES9 (all fixes SP3)
all works fine.
But no one disk fail, an we only see the hardware failure on the LEDs on the
front of the 19" rack.
no error/warning in
/var/log/warn
/var/log/messages
the only info I can get about the controller from sles is
srv000056:/proc/driver/cpqarray # more ida0
ida0: Compaq Smart Array 3200 Controller
Board ID: 0x40320e11
Firmware Revision: 4.50
Controller Sig: 0xa1bf02e0
Memory Address: 0xf891ef00
I/O Port: 0x3000
IRQ: 9
Logical drives: 2
Physical drives: 10
Current Q depth: 0
Max Q depth since init: 65
Logical Drive Info:
ida/c0d0: blksz=512 nr_blks=88854240
ida/c0d1: blksz=512 nr_blks=106683840
nr_allocs = 370834
nr_frees = 370834
in /var/log/boot.msg we see this message
<4>Compaq SMART2 Driver (v 2.6.0)
<7>cpqarray: Device 0xae10 has been found at bus 1 dev 0 func 0
<6>cpqarray: Finding drives on ida0 (Smart Array 3200)
<6>cpqarray ida/c0d0: blksz=512 nr_blks=88854240
<6>cpqarray ida/c0d1: blksz=512 nr_blks=106683840
<6> ida/c0d0: p1 p2 p3 p4
<6> ida/c0d1: p1
has anybody info how I can from SLES get status of the disc ?
because we administer some machine only remote.
regards
Reinhard
Geschaeftsfuehrer: Franz Bruckmaier, Dietmar J. Reinhard, Markus Wild
HRB 611793 Amtsgericht Freiburg i. Br.
---------------------------------------------------------------------
To unsubscribe, e-mail: suse-sles-e-unsubscribe@suse.com
For additional commands, e-mail: suse-sles-e-help@suse.com
This archive was generated by hypermail 2.1.7 : Thu May 24 2007 - 16:06:09 CEST