AW: [suse-sparc] DHCPd

From: Steve Graegert (itcsi@technologies.de)
Date: Thu Aug 02 2001 - 03:57:41 PDT

  • Next message: Steve Graegert: "AW: [suse-sparc] DHCPd" 

    From: "Steve Graegert" <itcsi@technologies.de>
Date: Thu, 2 Aug 2001 12:57:41 +0200
Message-ID: <NHEKLJKECCFMNMJKDODKKEJLCAAA.itcsi@technologies.de>
Subject: AW: [suse-sparc] DHCPd

    > -----Ursprüngliche Nachricht-----
    > Von: Witvliet, Hans [mailto:Hans.Witvliet@Alcatel.nl]
    > Gesendet: Donnerstag, 2. August 2001 12:43
    > An: suse-sparc@suse.com
    > Betreff: [suse-sparc] DHCPd
    >
    >
    >
    > LS
    >
    > Is there anyone with experience with dhcp on eth1?
    >
    > I have a U5 with Suse 7.1, and dynamic ip-address configured for
    > both eth0 and eth1 (with yast2)
    > On both lan segment i ahve a working dhcp server,
    > but /etc/rc.d/dhclient -restart only provides eth0 with an ip
    > address
    > While it says:
    > Starting service dhcp client on eth0 eth1
    > DONE
    >
    > (if i set an ip-address manually on eth1, the port works ok)

    Hi,

    only to be sure: did you properly set the "IFCONIG_0" and "IFCONFIG_1"
    variable in "/etc/rc.config" to "dhcpclient"?
    I realized that Yast sometimes doesn't do all the work for you.

    Bye,

    Steve. 

    -- 
To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
For additional commands, e-mail: suse-sparc-help@suse.com

    This archive was generated by hypermail 2.1.0 : Thu Aug 02 2001 - 04:13:33 PDT