From: "Steve Graegert" <itcsi@technologies.de> Date: Thu, 2 Aug 2001 13:23:07 +0200 Message-ID: <NHEKLJKECCFMNMJKDODKMEJNCAAA.itcsi@technologies.de> Subject: AW: [suse-sparc] DHCPd
You need to set NETDEV_0 and NETDEV_1 to "eth0" and "eth1", set
IFCONFIG_0="dhcpclient" and IFCONFIG_1="dhcpclient" otherwise your eth1
won't receive a dynIP. It works fine on my SPARC and Alpha.
Bye,
Steve.
> -----Ursprüngliche Nachricht-----
> Von: Witvliet, Hans [mailto:Hans.Witvliet@Alcatel.nl]
> Gesendet: Donnerstag, 2. August 2001 13:04
> An: 'steve.graegert@it-csi.de'; suse-sparc@suse.com
> Betreff: RE: [suse-sparc] DHCPd
>
>
> Yes,
>
> /etc/rc.config
> 177: IFCONFIG_0="eth0"
> 178: IFCONFIG_1="eth1"
> 178: IFCONFIG_2=""
> 179: IFCONFIG_3=""
>
> So that is correct
> I have here only sparc with suse, no intel machines (with linux), so i am
> not sure whether it is sparc/linux related, or general suse...
>
> Hans.
>
> > -----Original Message-----
> > From: Steve Graegert [SMTP:itcsi@technologies.de]
> > Sent: Thursday, August 02, 2001 12:58 PM
> > To: suse-sparc@suse.com
> > Subject: AW: [suse-sparc] DHCPd
> >
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Witvliet, Hans [mailto:Hans.Witvliet@Alcatel.nl]
> > > Gesendet: Donnerstag, 2. August 2001 12:43
> > > An: suse-sparc@suse.com
> > > Betreff: [suse-sparc] DHCPd
> > >
> > >
> > >
> > > LS
> > >
> > > Is there anyone with experience with dhcp on eth1?
> > >
> > > I have a U5 with Suse 7.1, and dynamic ip-address configured for
> > > both eth0 and eth1 (with yast2)
> > > On both lan segment i ahve a working dhcp server,
> > > but /etc/rc.d/dhclient -restart only provides eth0 with an ip
> > > address
> > > While it says:
> > > Starting service dhcp client on eth0 eth1
> > > DONE
> > >
> > > (if i set an ip-address manually on eth1, the port works ok)
> >
> > Hi,
> >
> > only to be sure: did you properly set the "IFCONIG_0" and "IFCONFIG_1"
> > variable in "/etc/rc.config" to "dhcpclient"?
> > I realized that Yast sometimes doesn't do all the work for you.
> >
> > Bye,
> >
> > Steve.
> >
> >
> > --
> > To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> > For additional commands, e-mail: suse-sparc-help@suse.com
>
> --
> To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> For additional commands, e-mail: suse-sparc-help@suse.com
>
-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Thu Aug 02 2001 - 04:15:32 PDT