Message-ID: <1A8904C3797ED411AC2E0008C7E6F88117C96C@nlntmail2b.ats.nld.alcatel.nl> From: "Witvliet, Hans" <Hans.Witvliet@Alcatel.nl> Date: Thu, 2 Aug 2001 13:37:25 +0200 Subject: RE: [suse-sparc] DHCPd
Sorry, typo from me, is indeed the case, i'll attach my rc.config below to
avoid other typo's...
<<rc.config>>
Hans
> -----Original Message-----
> From: Steve Graegert [SMTP:itcsi@technologies.de]
> Sent: Thursday, August 02, 2001 1:23 PM
> To: Witvliet, Hans; suse-sparc@suse.com
> Subject: AW: [suse-sparc] DHCPd
>
> You need to set NETDEV_0 and NETDEV_1 to "eth0" and "eth1", set
> IFCONFIG_0="dhcpclient" and IFCONFIG_1="dhcpclient" otherwise your eth1
> won't receive a dynIP. It works fine on my SPARC and Alpha.
>
> Bye,
>
> Steve.
>
> > -----Ursprüngliche Nachricht-----
> > Von: Witvliet, Hans [mailto:Hans.Witvliet@Alcatel.nl]
> > Gesendet: Donnerstag, 2. August 2001 13:04
> > An: 'steve.graegert@it-csi.de'; suse-sparc@suse.com
> > Betreff: RE: [suse-sparc] DHCPd
> >
> >
> > Yes,
> >
> > /etc/rc.config
> > 177: IFCONFIG_0="eth0"
> > 178: IFCONFIG_1="eth1"
> > 178: IFCONFIG_2=""
> > 179: IFCONFIG_3=""
> >
> > So that is correct
> > I have here only sparc with suse, no intel machines (with linux), so i
> am
> > not sure whether it is sparc/linux related, or general suse...
> >
> > Hans.
> >
> > > -----Original Message-----
> > > From: Steve Graegert [SMTP:itcsi@technologies.de]
> > > Sent: Thursday, August 02, 2001 12:58 PM
> > > To: suse-sparc@suse.com
> > > Subject: AW: [suse-sparc] DHCPd
> > >
> > >
> > >
> > > > -----Ursprüngliche Nachricht-----
> > > > Von: Witvliet, Hans [mailto:Hans.Witvliet@Alcatel.nl]
> > > > Gesendet: Donnerstag, 2. August 2001 12:43
> > > > An: suse-sparc@suse.com
> > > > Betreff: [suse-sparc] DHCPd
> > > >
> > > >
> > > >
> > > > LS
> > > >
> > > > Is there anyone with experience with dhcp on eth1?
> > > >
> > > > I have a U5 with Suse 7.1, and dynamic ip-address configured
> for
> > > > both eth0 and eth1 (with yast2)
> > > > On both lan segment i ahve a working dhcp server,
> > > > but /etc/rc.d/dhclient -restart only provides eth0 with an
> ip
> > > > address
> > > > While it says:
> > > > Starting service dhcp client on eth0 eth1
> > > > DONE
> > > >
> > > > (if i set an ip-address manually on eth1, the port works ok)
> > >
> > > Hi,
> > >
> > > only to be sure: did you properly set the "IFCONIG_0" and "IFCONFIG_1"
> > > variable in "/etc/rc.config" to "dhcpclient"?
> > > I realized that Yast sometimes doesn't do all the work for you.
> > >
> > > Bye,
> > >
> > > Steve.
> > >
> > >
> > > --
> > > To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> > > For additional commands, e-mail: suse-sparc-help@suse.com
> >
> > --
> > To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> > For additional commands, e-mail: suse-sparc-help@suse.com
> >
>
>
> --
> To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> For additional commands, e-mail: suse-sparc-help@suse.com
-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Thu Aug 02 2001 - 04:34:38 PDT