Re: [suse-sparc] installing on a netra t1ac200 with a vt520 terminal.

From: Thorsten Kukuk (kukuk@suse.de)
Date: Thu Aug 09 2001 - 08:44:39 PDT

  • Next message: Holzrichter, Bruce: "[suse-sparc] init_rd" 

    Date: Thu, 9 Aug 2001 17:44:39 +0200
From: Thorsten Kukuk <kukuk@suse.de>
Message-ID: <20010809174438.A1923@suse.de>
Subject: Re: [suse-sparc] installing on a netra t1ac200 with a vt520 terminal.

    On Thu, Aug 09, jcbarnoud wrote:

    > Hello,
    >
    > I am trying to install suse 7.1 sparc on a sun netra t1 ac200. This
    > netra does not support a frame buffer so I hooked a vt520 (an original
    > Digital Equipment dumb terminal) on the A (lom) serial port.
    >
    > First strategy (trying to follow the instructions as I understood them
    > ...)
    > I put the suse cd in the cdrom reader and at the ok prompt typed :
    > boot cdrom manual TERM=vt102(enter)
    > after uncompressing and booting the kernel (booting linux ...)
    > everything hangs properly.

    Maybe you should try TERM=vt520 or whatever your terminal needs ?

      Thorsten 

    -- 
Thorsten Kukuk       http://www.suse.de/~kukuk/        kukuk@suse.de
SuSE GmbH            Deutschherrenstr. 15-19       D-90429 Nuernberg
--------------------------------------------------------------------    
Key fingerprint = A368 676B 5E1B 3E46 CFCE  2D97 F8FD 4E23 56C6 FB4B

    -- 
To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
For additional commands, e-mail: suse-sparc-help@suse.com

    This archive was generated by hypermail 2.1.0 : Thu Aug 09 2001 - 08:41:07 PDT