Re: [suse-sparc] SILO:Booting SunOS

From: Thorsten Kukuk (kukuk@suse.de)
Date: Thu Feb 08 2001 - 23:17:16 PST

  • Next message: Simon P. Grasser: "boot cdrom drive"

    Date: Fri, 9 Feb 2001 08:17:16 +0100
    From: Thorsten Kukuk <kukuk@suse.de>
    Message-ID: <20010209081716.A10194@suse.de>
    Subject: Re: [suse-sparc] SILO:Booting SunOS
    

    Hi,

    On Fri, Feb 09, Matthias Landwehr wrote:

    > Hello everybody on the list,
    > i've a SparcStation IPC (sun4c arch) with three operating systems on it:
    > Debian Linux, SuSE and SunOS.
    > Dual booting the two Linux OS with SILO works fine.
    > SILO resides on /dev/sda1 (SCSI Disk 1 with ID 1, LUN 0)
    > SunOS 4.1.3 Kernel vmunix resides on /dev/sdb1 (SCSI Disk 2 with ID 3,
    > LUN 0)
    > My OpenBoot Version is 2.4
    > The following error occur:
    >
    > When i type
    > boot /sbus/esp/sd@1,0
    >
    > on the OpenBoot Prompt, then SILO comes up
    > I wish to boot SunOS and type on the SILO prompt
    > /sbus/esp@0,80000/sd@3,0;/vmunix

    Hm, the old SPARCs switched id0 and id3 in PROM. You should try
    /sbus/esp@0,80000/sd@0,0;/vmunix

      Thorsten

    -- 
    Thorsten Kukuk       http://www.suse.de/~kukuk/       kukuk@suse.de
    SuSE GmbH            Schanzaeckerstr. 10            90443 Nuernberg
    Linux is like a Vorlon.  It is incredibly powerful, gives terse,
    cryptic answers and has a lot of things going on in the background.
    



    This archive was generated by hypermail 2.1.0 : Wed Jun 06 2001 - 11:08:39 PDT