Re: [suse-sparc] SS20 with 2.25 bois...

From: Lou Picciano / Essex Systems (LouPicciano@home.com)
Date: Thu Jun 14 2001 - 19:09:28 PDT

  • Next message: dan carter: "Re: [suse-sparc] Kernel Compression?"

    Date: Thu, 14 Jun 2001 22:09:28 -0400
    From: Lou Picciano / Essex Systems <LouPicciano@home.com>
    Message-ID: <B74EE697.39EC%LouPicciano@home.com>
    Subject: Re: [suse-sparc] SS20 with 2.25 bois...
    

    Kirk:

    Earlier this year I was doing an upgrade of my own machines... It was
    surprisingly hard to find the document (I will send it to you directly,
    rather than clog the list with the attachment). My original email on this
    is copied below)

    However, I had no problem with the upgrade of the Open Boot PROM itself;
    this document covers issues related to jumper settings in SS10/20 when using
    the Ross units.

    Best luck - Lou
    ---------------------------------------------------------
    From: Lou Picciano / Essex Systems <LouPicciano@home.com>
    Date: Wed, 16 May 2001 22:09:45 -0400
    To: Peter Knaggs <Peter.Knaggs@oracle.com>
    Subject: Re: [suse-sparc] ROSS processors, dual 180 MHz?

    Peter,

    Yes, what I cam up with after some research and some discussion with some
    very helpful tecchies was the document attached. It outlines the various
    jumper settings for using the Ross processors in various Sun boxes.
    Surprisingly, this was a little difficult to track down.

    I have _not_ as yet been able to load the newest Linux SMP kernel shipping
    with SuSE 7.1, however (am I thinking of 2.2.4?). The older SMP kernel
    shipped (2.2.18?) does work.

    I also have no way to benchmark performance of my new rig - do you have any
    such software? Maybe you can send me a nice multiprocessor version of Oracle
    for my machine, right?

    Lou Picciano

    > From: "Kirk Moore @ Moore Webs" <kmoore@moorewebs.com>
    > Date: Tue, 12 Jun 2001 23:14:53 -0700
    > To: <suse-sparc@suse.com>
    > Subject: [suse-sparc] SS20 with 2.25 bois...
    >
    > I have installed the 2.25 bois for Ross chips. I do not have the Chips yet,
    > but I thought to make sure the chip was installed.
    >
    > I know that on this list a while back there was a couple of steps that had
    > to be performed when installing this chip... Does anyone remember that
    > message, better yet, can you send it to me, or point me in the right
    > direction.
    >
    >
    > --
    > Kirk Moore
    > Network Engineer / Web Master
    >
    > "Black Holes are created when God divides by zero!!"
    >
    >
    > --
    > To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
    > For additional commands, e-mail: suse-sparc-help@suse.com
    >

    -- 
    To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
    For additional commands, e-mail: suse-sparc-help@suse.com
    



    This archive was generated by hypermail 2.1.0 : Thu Jun 14 2001 - 19:07:55 PDT