Re: [suse-sparc] HELP>>>>>>.

From: kat (kathee@mindiq.com)
Date: Sun May 06 2001 - 18:06:33 PDT

  • Next message: Thorsten Kukuk: "Re: [suse-sparc] SCSI disk limit of 16"

    Message-Id: <5.0.2.1.2.20010506210502.00ae4290@mail.mindiq.com>
    Date: Sun, 06 May 2001 21:06:33 -0400
    From: kat <kathee@mindiq.com>
    Subject: Re: [suse-sparc] HELP>>>>>>.
    

    I bet the CD was simply burned wrong... common mistake -- the ISO is copied
    to the CD as a file, instead of as an image.

    Let's not over think this problem folks......

    cheers
    Kathee

    At 08:48 PM 5/6/2001 -0400, Robin-David Hammond wrote:

    >Disclaimer: I have not yet installed SUSE on a sparc. The following assumption
    >are based on RH 6.X and Mandrake installs on SUN and SUN/OEM UltraSparc
    >systems.
    >
    >The CD-ROM must be sending the correct sized SCSI packets (aka "blocks")
    >(normaly 512 octets) for a Sparc to boot from it. This should be
    >documented next
    >to the DIP switches on the underside of the CDROM's chasis, or the
    >jumperpins on
    >the drives control board. I dont know which boot image you downloaded, but the
    >boot.img on the cdrom should boot from floppy and then kick over to cdrom.
    >(scsi
    >id 6, normaly on sparcs). Packet size should not be an issue if you boot from
    >floppy.
    >
    >The Apple CD600e is very sparc friendly, and is avail for less than 50 USD
    >from
    >consignment stores like Computer Renaisance. i have never had a problem
    >booting
    >into any OS from one of these.
    >
    >hope something here helps.
    >
    >
    >
    >-
    >
    >Robin-David Hammond
    >56 Hardwick RD
    >Ashland MASS, USA
    >
    >"Contrary to popular belief, penguins are not the salvation of modern
    >technology. Neither do they throw parties for the urban proletariat."
    >
    >
    >
    >On Sun, 6 May 2001, CA wrote:
    >
    > > To: suse-sparc@suse.com
    > > Subject: [suse-sparc] HELP>>>>>>.
    > >
    > > First off, I'm new to Linux, but I know unix. I'm trying
    > > to load suse 7.1 on a sparc10 (after several tries with
    > > other flavors). I downloaded the first cd, burned it and
    > > did a boot cdrom, I get error messages stating bad
    > > magic,label..blah blah blah, so I downloaded the boot
    > > image, used rawrite to create a floppy,it loaded and
    > > now it's asking for a root disk ?? I thought the cd was
    > > the answer to my prayers ,so my question is what is the
    > > best way to load this ?
    > >
    > > Thanks
    > >
    > > __________________________________________________
    > > Do You Yahoo!?
    > > Yahoo! Auctions - buy the things you want at great prices
    > > http://auctions.yahoo.com/
    > >
    > >



    This archive was generated by hypermail 2.1.0 : Wed Jun 06 2001 - 11:09:11 PDT