Message-ID: <1A8904C3797ED411AC2E0008C7E6F88117C9ED@nlntmail2b.ats.nld.alcatel.nl> From: "Witvliet, Hans" <Hans.Witvliet@Alcatel.nl> Date: Thu, 11 Oct 2001 10:51:31 +0200 Subject: RE: [suse-sparc] DSL-Router with an SS20
Hi Sirko,
One of the RJ45 (twisted pair connector) is indeed intended for a LAN
-interface (10-BASE-T)
But you can use only one of them: Either directly the RJ45, OR the
AUI-interface with your adaptercable (with a AUI to 10-base-T or AUI to BNC
adapter)
On a default hardware configuration, this the only lan interface. (I have a
SS20 here on my desk)
If you detect a second RJ45 interface, you probably have a additional S-BUS
board.
If you boot it should show up in the boot log as eth0 and eth1.
Forget about the ISDN interface (SS10, LX, voyager) I started working on it,
but it is a serious case of bit-rot (unmaintained for to long) and as 32-bit
is still not working ,I had to abbandoned it again. I use my LX now as
firewall at home.
Hans
-----Original Message-----
From: OIiver Brueck [SMTP:oliver.brueck@alcatel.de]
Sent: Thursday, October 11, 2001 10:22 AM
To: suse-sparc@suse.com
Subject: Re: [suse-sparc] DSL-Router with an SS20
ogf@bnv-bamberg.de wrote:
>
> On Thu, 11 Oct 2001, Sirko Sopart wrote:
>
> > But at the SS20 are two other twisted pair holes ( sorry, I
don't
> > know the english name = german: Buchsen ). Can I handle this as
an
> > network device too?
>
> I suppose these are ISDN S0 connectors; so, no, you can't use them
> to connect to your network. My SUN Sparcstation LX has them, too.
I don't think that these are ISDN connectors, because ISDN normally
is
built in only into SS LX, SS10 and SS Voyager.
CU
Oliver
--
----------------------------------------------------------------------
Oliver Brück ITE Development
Lorenzstr. 10 Phone: +49 (0)711 821-41301
70435 Stuttgart Fax: +49 (0)711 821-45403
>>> ALCATEL - ARCHITECTS OF AN INTERNET WORLD <<<
------------- http://www.alcatel.com ------------
----------------------------------------------------------------------
--
To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
For additional commands, e-mail: suse-sparc-help@suse.com
-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Thu Oct 11 2001 - 02:10:56 PDT