Re: [suse-sparc] Terminal unset during serial install.

From: Sepp Käsbauer (s_kaesbauer@rosenberger.de)
Date: Thu Oct 18 2001 - 04:25:02 PDT

  • Next message: Aurelian Lavric: "[suse-sparc] Ultra1 Upgraded OpenBoot and 2.4.x kernels" 

    Message-ID: <3BCEBC0E.D0BD1260@rosenberger.de>
Date: Thu, 18 Oct 2001 13:25:02 +0200
From: Sepp Käsbauer <s_kaesbauer@rosenberger.de>
Subject: Re: [suse-sparc] Terminal unset during serial install.

    >Can anyone point me to some instructions on how to get SuSE-7.1 to
    >install on a headless Ultra10 ??

    hi,
    i installed a ultra2 with suse 7.1 (btw. 7.3 beta1 and beta2 are not
    booting)
    headless. i also used minicom. serial setup is 9600,8,n,1 xon-xoff
    (wires 2,3 and 7 only)

    if you want to scroll with minicom press ctrl-a followed by "b" then you
    will get a history

    at the silo prompt you could try:
    SILO: yast2 expert=1 TERM=vt102
    this would improve the terminaloutput

    good luck.
    btw. my ultra2 is running quite fast with suse 7.1 but i have problems
    to boot 7.3 with kernel 2.4.10 and had no chance to work with an
    external raid array of 3 disks. 

    -- 
Sepp Käsbauer
Rosenberger Hochfrequenztechnik
HF-Labor R&D QA
Hauptstrasse 1
83413 Fridolfing
Germany, Bavaria
Tel: +49-8684-18163
mailto:s_kaesbauer@rosenberger.de
http://www.rosenberger.de

    -- 
To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
For additional commands, e-mail: suse-sparc-help@suse.com

    This archive was generated by hypermail 2.1.0 : Thu Oct 18 2001 - 04:25:09 PDT