RE: [suse-sparc] DoD with rp-pppoe question.

rolf@diesing.net
Date: Mon Feb 04 2002 - 13:50:48 PST

  • Next message: Joel Niedfeldt: "RE: [suse-sparc] Ethernetcard problems" 

    From: <rolf@diesing.net>
Date: Mon, 4 Feb 2002 22:50:48 +0100
Message-ID: <BCEMLCNMANGFBIDLIOAJKEPDCAAA.rolf@diesing.net>
Subject: RE: [suse-sparc] DoD with rp-pppoe question.

    Good News Good News Good News Good News Good News Good News Good News

    I think, i found a solution for that Problem.

    SuSE uses the ppp 2.3.7 witch is not able to do DoD on rp-pppoe.
    This may be the reason for Problems with smpppd (the old pppoed) too.
    A ppp newer than 2.3.10.3 is needed. (smpppd not tested yet.)

    After installing ppp-2.3.11.2-src.rpm and compiling on my Box,
    now rp-pppoe works in DoD-Mode! The newest ppp for 2.2.x is 2.3.11.7
    You can't use the ppp 2.4.1, this version is only for 2.4.x-Kernels!!!

    I hope, now Thorsten Kukuk do a official SUSE RPM-Update for the many
    Sparcusers with 2.2.20-Kernel. Imho ppp and adsl is a very important
    Thing for many Sparc@Home-Users.

    Please, Thorsten... do it!

    Best Regards

    Rolf 

    --
[EOF]

    > -----Original Message-----
> From: Markus Amann [mailto:ma@suedconsult.de]
> Sent: Monday, February 04, 2002 9:37 AM
> To: suse-sparc@suse.com
> Cc: rolf@diesing.net
> Subject: Re: [suse-sparc] DoD with rp-pppoe question.
>
>
> Hello Rolf
>
> i had the same problem :(
> the one and only solution that i have found is to migrate to Kernel 2.4.2
> from the SuSE 7.1 Distr. OK it is not the best way but for me the
> only at the
> moment. If you need the SuSE RPMs from the Kernel 2.4.2 ( SUN4M )
> send me a
> Email and i send it you offline the Maillinglist.
> Don t forget to update the Firewall2 Scripts to v 2.1 if you want
> to Upgrade
> to Kernel 2.4.2 maybe there some Problems with the old one.
>
> Regards
> 	Markus
>
>
> > "Netstat -rn" shows the ppp0 as Gateway.
> >
> > I think, pppd try to open ppp0 but this exits and the system returns the
> > next
> > free number for pppX in this case 1. See at the top.
> >
> > So why is DoD not working? Any Ideas? What can i do to fix that?
> >
> > Rolf

    -- 
To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
For additional commands, e-mail: suse-sparc-help@suse.com

    This archive was generated by hypermail 2.1.0 : Mon Feb 04 2002 - 13:49:32 PST