Message-ID: <7CC8E60C08D54F42A9644893A434EC83103BED@atcbbexch01.surfon.vienna.chello.at> From: "Zeller, Wolfgang" <wzeller@chello.at> Date: Thu, 10 Jan 2002 16:51:10 +0100 Subject: RE: [suse-sparc] Sunblade 1000 install problem
u are right, seems to be a qlc-pci1077 according to prtconv
cheers
Wolfgang
> -----Original Message-----
> From: Dirk Wetter [mailto:dirkw@rentec.com]
> Sent: Donnerstag, 10. Januar 2002 16:11
> To: Thorsten Kukuk
> Cc: 'suse-sparc@suse.com'
> Subject: Re: [suse-sparc] Sunblade 1000 install problem
>
>
> On Thu, 10 Jan 2002, Thorsten Kukuk wrote:
>
> > On Thu, Jan 10, Zeller, Wolfgang wrote:
> >
> > >
> > > Hi there,
> > >
> > > I´m trying to get Suse 7.3 installed on my blade with no
> luck - I get to the
> > > nice graphical YAST screen, the installation program
> > > ticks of one item after the other, however when it comes
> to hard disks it
> > > aborts with: "no hard disks where found". The blade has
> > > one internal 36GB FCAL disk. Does anyone know if this is
> supported ?
> >
> > I had only one without FCAL disks, so FCAL disks are not supported.
>
> ?
>
> the sun blade 1000 - at least the ones i have here running Solaris -
> have the qlogic driver. i don't specifically know which qlc driver
> (there are two) is used in the SuSE kernel, but in principal there
> shouldn't be a reason not to support it. unless one cannot boot from a
> FC drive under Linux....
>
>
> cheers,
> ~dirkw
> __________________________________
> Dirk Wetter @ Renaissance Techn.
> mailto:<dirkw at rentec dot com>
>
>
>
> --
> To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> For additional commands, e-mail: suse-sparc-help@suse.com
>
>
-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Thu Jan 10 2002 - 07:50:01 PST