Date: Thu, 24 Jan 2002 13:27:42 -0800 From: Hielke Christian Braun <hcb@unco.de> Message-ID: <20020124212742.GA7454@cibro.nikojet.com> Subject: [suse-sparc] Could not find any available memory for initial ramdisk
Hi,
i am trying to install SuSE 7.3 on an enterprise 4500 server
with 7GB of ram. Anyone seen this before? Any suggestions?
{0} ok reset
Resetting...
Software Power ON
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
8-slot Sun Enterprise E4500/E5500, No Keyboard
OpenBoot 3.2.28, 7168 MB memory installed, Serial #11811944.
Copyright 2000 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:b4:3c:68, Host ID: 80b43c68.
{0} ok boot cdrom
Boot device: /sbus@3,0/SUNW,fas@3,8800000/sd@6,0:f File and args:
SILO
>>>>> SuSE Linux/SPARC 7.3 <<<<<
=========================================================================
You can type one of the following options here and press enter or wait
for the timeout to start the installation with YaST2:
yast2 - default, start the installation with YaST2.
text - start YaST2 in text mode
manual - if you wish to load modules or make other changes before
starting YaST2
rescue - to start the rescue system. This does not work yet with a
serial console
boot:
manual yast2 text
rescue
boot: manual mem=7168M
Uncompressing image...
Could not find any available memory for initial ramdisk
Fatal error: You do not have enough continuous available memory for such initia.
Program terminated
{0} ok
Thank you!
Christian.
-- nikojet Inc. | Phone: +1 858 777 1820 4600 La Jolla Village Drive | Fax: +1 858 777 1810 Suite 775 | Ripe: HCB42-RIPE San Diego CA 92122 | Mail: hcb@crew.nikojet.com-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Thu Jan 24 2002 - 13:27:14 PST