From: Matthias Schulz <schulz@sms-softwaretechnik.de> Date: Thu, 18 Jul 2002 07:15:37 +0200 Message-Id: <0207180715371T.09283@frontend> Subject: Re: [suse-sparc] SPARC StorageArray problems
Hi John,
so far, there's no answer to this question.
Up until now, fact is, that the SSA runs perfectly with 2.2.20
kernel on a Sun4d architecture (i.e. SS1000).
Lou Piccicano and I did some testing on either SS10/20 (Sun4m) and
the Ultra 1 but didn't succeed.
In the source for fc4.c and/or soc is mentioned that this code was
tested with the SS1000 and the Ultra 1 (?). So my personal hope was
to get rid of my SS1000 and put the SSA on an Ultra box (and I did
spent a lot of money and time on this issue).
But if you get the same error than we did month ago, I am afraid,
it doesn't work with the Ultra 1 :-((.
We tried to contact the programmer of the fc4 / soc code but didn't
get any feedback at all.
Sorry to tell you this, but this is the status of this issue as far
as I know.
Matthias
Am Mittwoch 17 Juli 2002 19:55 schrieben Sie:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hey Folks,
>
> I am attempting to get a SPARC StorageArray 114 working on my
> Ultra1 (143 MHz) which is running SuSE for SPARC 7.3 as updated
> through YOU. I can modprobe fc4 and soc, and this will light up
> the "Fibre Icon" on the StorageArray. I do get a no
> license/taint the kernel error warning, but it loads the modules
> anyway. When I modprobe pluto to load pluto.o, I get the
> following messages (after the no license/taint warning):
>
> /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o init_module: No
> such device Hint: insmod errors can be caused by incorrect module
> parameters, including invalid IO or IRQ parameters
> /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o: insmod
> /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o failed
> /lib/modules/2.4.14/kernel/drivers/scsi/pluto.o: insmod pluto
> failed
>
> I googled and found that a very similar question was asked on
> this list in February 2002, but I couldn't find if there was an
> answer. Any help, pointers, etc. will be greatly appreciated. I
> would hate to have to reinstall Solaris on this box.
>
> Thanks,
>
> John Heywood
>
> - --
> John Quentin Heywood
> heywood@american.edu
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.0.7 (GNU/Linux)
>
> iD8DBQE9Na+sgYU8OFyQRP4RAlDXAJ4zvL7vsHh1dEahDZA/dNHLlcnP4gCeKjzo
> MZxnie6sGs5x+obNWHulk+c=
> =AxTI
> -----END PGP SIGNATURE-----
-- *********************************************************************** SMS Softwaretechnik Matthias Schulz Lange Strasse 44 70794 Filderstadt Tel: +49-7000-17 17 17 17 ***********************************************************************-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Thu Jul 18 2002 - 08:15:26 CEST