Message-ID: <3D0DBE3A.3329C5D1@on-the-web.ch> Date: Mon, 17 Jun 2002 12:47:22 +0200 From: Martin Herren <sputnik@on-the-web.ch> Subject: Re: [suse-sparc] install Suse 7.3 on SunBlade 100
olivier.hochreutiner@epfl.ch wrote:
^^^^ y en a d'autres au poly à faire tourner un
pinguin sur leur Blade ???
>
> Hi,
>
> > I installed SuSE 7.3 on my Blade 100 at work a few weeks ago. Everything
> > went fine except for a small video problem.
what kind of video problem ?
i couldn't get X to run on my Blade 100, seems to be a timing/sync
problem... the generated video signal seems to not exactly match the
configuration, so my cheap TFT can't sync...Solaris works fine on the
same box with the same screen...
> I have the same problem: to fix it you should update the kernel to 2.4.18pre4
> (Warning : the 2.4.18 does not boot on a Blade 100. You have to use the
> 2.4.18pre4). This should also fix some sound problems, but I have not been
> able to boot once the kernel is compiled. This is probably because of the
> initrd (I used the one from the 2.4.14 kernel). If anybody managed to boot
> with the 2.4.18pre4 kernel please let me now !
i run without any problem a 2.4.19-pre10, and previously a pre8. as far
as i remember the pre8 was the first one where reiserfs worked again on
sparc... so i couldn't test the other ones.
i didn't change anything to initrd... still use the default one... i
just copied the kernel and the System-map (called vmlinuz-2.4.19-pre10
and System.map-2.4.19-pre10) to /boot and configured /boot/silo.conf
/Martin
-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Mon Jun 17 2002 - 12:52:32 CEST