Date: Tue, 5 Mar 2002 14:11:30 +0000 (GMT) From: Ferris McCormick <fmccor@patriot.net> Message-ID: <Pine.SOL.4.04.10203051403550.635-100000@asp.inforead.com> Subject: RE: [suse-sparc] Boot trouble SILO, PROM??
On Tue, 5 Mar 2002, Hamans, B.C. wrote: (what's below my note)
I think that's right (so says the FE Handbook), but at the 'ok'
prompt, you might try
ok probe-scsi
and see what the system thinks. You might also try something like
ok show-disks
It should come back with a list and a request to select one. You should
see one hard disk; so, select it and then
ok boot ^Y (--control-Y--)
At least, this sequence worked for me when I needed the boot PROM to tell
me what it thought mi disk was.
Regards,
Ferris
> Yes it is 3 (at least i think so) and because it is a SCA drive i can't set
> it myself so that should work i think. Does it matter if I use the upper or
> lower drive 'bay' in my SS5 it now is in the lower bay.
>
> Bob
>
> -----Original Message-----
> From: Schaefer, Robert (PS) [mailto:Robert.Schaefer@ps.bellhowell.com]
> Sent: dinsdag 5 maart 2002 14:09
> To: 'suse-sparc@suse.com'
> Subject: RE: [suse-sparc] Boot trouble SILO, PROM??
>
>
> Okay, I'll chime in with the dumb question, what's the SCSI ID of the drive
> in question? (It should be 3)
>
> --
> To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com
> For additional commands, e-mail: suse-sparc-help@suse.com
>
-- Ferris McCormick (P44646, MI) <fmccor@inforead.com> Phone: (703) 392-0303 Fax: (703) 392-0401-- To unsubscribe, e-mail: suse-sparc-unsubscribe@suse.com For additional commands, e-mail: suse-sparc-help@suse.com
This archive was generated by hypermail 2.1.0 : Tue Mar 05 2002 - 06:09:24 PST