[caasp-beta] [Newsletter] Re: RE : kubectl requires username and password
Paul Gonin
paul.gonin at suse.com
Wed Oct 4 01:01:47 MDT 2017
Hi Rushi,
Most of our tests were single master based, try first with only one
master.Also you ardeploying on VMWare, is that correct ? I will try to
reproduce your deployment configuration in our lab.
thanksPaul
Le mardi 03 octobre 2017 à 19:28 +0000, Ns, Rushi a écrit :
> I searched everynode and nothing found , I’m going to rebuild it to
> see if anything can make difference.
>
> Keep you posted.
>
>
>
>
> Best Regards,
>
> Rushi.
> I MAY BE ONLY ONE PERSON, BUT I CAN BE ONE PERSON WHO MAKES A
> DIFFERENCE
>
>
>
>
> From: Liam McCafferty <Liam.McCafferty at smartodds.co.uk>
>
> Date: Tuesday, October 3, 2017 at 12:27 PM
>
> To: Rushi NS <rushi.ns at sap.com>
>
> Cc: "rroland at suse.com" <rroland at suse.com>, "caasp-beta at lists.suse.com
> " <caasp-beta at lists.suse.com>
>
> Subject: Re: [caasp-beta] [Newsletter] Re: RE : kubectl requires
> username and password
>
>
>
>
>
> Actually I'm mistaken they run under the system namespace so -n kube-
> system should get you what you need
>
>
> Sent from Blue
>
>
>
> On 3 Oct 2017, at 8:24 pm, Liam McCafferty <Liam.McCafferty at smartodds
> .co.uk> wrote:
>
> > If I remember correctly dex runs on the cassp admin node. Any luck
> > finding it there?
> >
> >
> >
> > Sent from Blue
> >
> >
> >
> > On 3 Oct 2017, at 7:45 pm, "Ns, Rushi" <
> > rushi.ns at sap.com> wrote:
> > > Hi Robert,
> > >
> > > I don’t think bootstrap failed as the cluster completed without
> > > any errors and VELUM shows all active.
> > >
> > >
> > >
> > > Also on the master node, I see that dex.yaml and roles.yaml which
> > > all exist but not sure if the PODS running ..
> > >
> > > In a worst case I will try to rebuild the cluster to see if it
> > > works. By the way , in which node the DEX was running, I checked
> > > all my ndoes and I
> > > can’t find DEX running as POD ?
> > >
> > > lvsusekub5:~ # ls -ltr
> > > total 16
> > > drwxr-xr-x 1 root root 0 Jun 27 08:59 bin
> > > drwxr-xr-x 1 root root 36 Sep 26 02:13 inst-sys
> > > -rw-r--r-- 1 root root 156 Sep 26 04:18 flannel-config.json
> > > -rw-r--r-- 1 root root 3034 Sep 26 04:19 dex.yaml
> > > -rw-r--r-- 1 root root 1161 Sep 26 04:19 roles.yaml
> > > -rw-r--r-- 1 root root 3295 Oct 3 18:37 kubeconfig
> > >
> > >
> > >
> > >
> > >
> > >
> > > Best Regards,
> > >
> > >
> > >
> > > Rushi.
> > > I MAY BE ONLY ONE PERSON, BUT I CAN BE ONE PERSON WHO MAKES A
> > > DIFFERENCE
> > >
> > >
> > >
> > >
> > > From:
> > > Robert Roland <rroland at suse.com>
> > >
> > > Date: Tuesday, October 3, 2017 at 11:38 AM
> > >
> > > To: "caasp-beta at lists.suse.com" <caasp-beta at lists.suse.com>, "DEl
> > > der at novacoast.com" <DElder at novacoast.com>, Rushi NS <rushi.ns at sap
> > > .com>, Paul Gonin <PGonin at suse.com>, Rob de Canha-Knight <rob.dec
> > > anha-knight at suse.com>
> > >
> > > Subject: Re: [caasp-beta] [Newsletter] Re: RE : kubectl requires
> > > username and password
> > >
> > >
> > >
> > >
> > >
> > >
> > > That "Forbidden" error implies that your cluster bootstrap didn't
> > > complete successfully. Please submit a bug with a full
> > > supportconfig dump.
> > >
> > >
> > >
> > > Dex is set up by the bootstrap process. This error means that one
> > > of the steps in setting up Dex failed.
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > >
> > > Rob
> > >
> > >
> > >
> > >
> > >
> > > >>> "Ns, Rushi" <rushi.ns at sap.com> 10/03/17 11:16 AM >>>
> > >
> > > Hi Paul,
> > >
> > > Thank you . I have tried the same one with latest caasp-cli and
> > > the result is same. FYI, I setup 3 masters with 6 workers and I
> > > tried all 3 masters
> > > hostname one by one with the command line caasp-cli but nothing
> > > is really working.
> > >
> > > Do I have to setup any DEX container on the cluster ? or it does
> > > embedded part of it and why it is asking me DEX”
> > >
> > >
> > > caasp-cli login -s https://hostname:6443 -u rushi at id.com -p
> > > xxxxxx
> > >
> > > Error: unable to find Dex service in CaaS Platform cluster, error
> > > was Get https://hostname:6443/api/v1/namespaces/kube-system/servi
> > > ces/dex:
> > > Forbidden
> > >
> > >
> > >
> > >
> > > Best Regards,
> > >
> > > Rushi.
> > > I MAY BE ONLY ONE PERSON, BUT I CAN BE ONE PERSON WHO MAKES A
> > > DIFFERENCE
> > >
> > >
> > >
> > >
> > > From:
> > > Paul Gonin <paul.gonin at suse.com>
> > >
> > > Date: Tuesday, October 3, 2017 at 8:55 AM
> > >
> > > To: Rob de Canha-Knight <rob.decanha-knight at suse.com>, Rushi NS <
> > > rushi.ns at sap.com>, "caasp-beta at lists.suse.com" <caasp-beta at lists.
> > > suse.com>, Dan Elder <DElder at novacoast.com>
> > >
> > > Subject: Re: [caasp-beta] [Newsletter] Re: RE : kubectl requires
> > > username and password
> > >
> > >
> > >
> > >
> > >
> > > Hi,
> > >
> > >
> > >
> > >
> > >
> > > You need to check that between master node and admin node the
> > > port 389 is open - for example if you're using OpenStack you need
> > > the check that the security group is properly defined
> > > to allow this port
> > >
> > >
> > >
> > >
> > >
> > > rgds
> > >
> > >
> > > Paul
> > >
> > >
> > >
> > >
> > >
> > > Le mardi 03 octobre 2017 à 15:17 +0000, Rob de Canha-Knight a
> > > écrit :
> > >
> > > > Rushi.
> > > >
> > > >
> > > > The details I provided below on caasp-cli is how I’ve been
> > > > using caasp-cli since day one.
> > > >
> > > > I’ve just tried again on a new cluster and running
> > > >
> > > >
> > > > caasp-cli login -s https://master.caaspdemo.geeko.ninja:6443 -u
> > > > rob.decanha-knight at suse.com -p mypassword
> > > >
> > > > Where –u is the email address of the user I created during
> > > > velum first startup/login.
> > > >
> > > > Worked fine for me.
> > > >
> > > > I don’t have any other documents to hand (other than the
> > > > attached) around logging in so all I can personally suggest is
> > > > to make sure you’re using https and port 6443 of the kubernetes
> > > > master after -s.
> > > >
> > > > I’ve also attached the main bit of documentation we have around
> > > > the caasp-cli client (which will make it’s way into the version
> > > > 2 final release).
> > > >
> > > >
> > > > I would suggest trying again from scratch with a new cluster
> > > > instance of RC1 (including downloading and installing the
> > > > updated caasp-cli client available from
> > > > https://github.com/kubic-project/caasp-cli/releases as this one
> > > > is working fine for me).
> > > > Make a note of every command you are running and the output it
> > > > provides and you can send those details to this list as at the
> > > > moment the information in the thread is a bit scattered
> > > > and I can’t tell accurately what’s going on or what’s being
> > > > done by the user.
> > > >
> > > > Yes there are a lot of changes in this release mainly an
> > > > updated k8s version and a feature much requested by customers
> > > > (I remember during 1.0 betas you also requested for user
> > > > management
> > > > and this is how we’ve implemented it). I’ve also attached the
> > > > details on how to create/manage additional user accounts
> > > > through ldap as well as the caasp-cli guidance that we have.
> > > >
> > > > As one of our closest partners you also have the option of
> > > > reaching out to your partner sales engineer/rep for your region
> > > > and discussing it directly with them. They should be able
> > > > to go onsite and help you if asked to get things up and
> > > > running for your team.
> > > >
> > > > All the best,
> > > > Rob
> > > >
> > > >
> > > > ----
> > > > Rob de Canha-Knight
> > > >
> > > > EMEA Platform and Management Technical Strategist
> > > >
> > > > SUSE
> > > >
> > > > rob.decanha-knight at suse.com
> > > > (Fuze/VOIP) +44 (0) 1635 937689
> > > >
> > > > (M) +44 (0) 7392 087303
> > > > (TW)
> > > > rssfed23
> > > >
> > > > ----
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > From:
> > > > "Ns, Rushi" <rushi.ns at sap.com>
> > > >
> > > > Date: Tuesday, 3 October 2017 at 16:07
> > > >
> > > > To: "caasp-beta at lists.suse.com" <caasp-beta at lists.suse.com>,
> > > > Dan Elder <DElder at novacoast.com>, Rob de Canha-Knight <rob.deca
> > > > nha-knight at suse.com>
> > > >
> > > > Subject: Re: [caasp-beta] [Newsletter] Re: RE : kubectl
> > > > requires username and password
> > > >
> > > >
> > > >
> > > >
> > > > Hi Rob,
> > > >
> > > > Whatever you have mentioned is not really working in reality.
> > > > Using CAASP-cli is not at all authenticating and I spent 2 days
> > > > to find a way to connect
> > > > to cluster.
> > > >
> > > >
> > > > VELUM is fine, I can logon with registed email but nothing can
> > > > be done after that such as installing kubernetes dashboard is
> > > > not ? first of all need to know how to connect with CAASP-CLI
> > > > because there is no users created other than VELUM web login
> > > > which was
> > > > registered.
> > > >
> > > > Can you provide some steps how you have doing with caasp-cli..i
> > > > see lot of things changed on this new release.
> > > >
> > > >
> > > >
> > > >
> > > > Best Regards,
> > > >
> > > > Rushi.
> > > > I MAY BE ONLY ONE PERSON, BUT I CAN BE ONE PERSON WHO MAKES A
> > > > DIFFERENCE
> > > >
> > > >
> > > >
> > > >
> > > > From:
> > > > <caasp-beta-bounces at lists.suse.com> on behalf of Rob de Canha-
> > > > Knight <rob.decanha-knight at suse.com>
> > > >
> > > > Date: Tuesday, October 3, 2017 at 6:57 AM
> > > >
> > > > To: Dan Elder <DElder at novacoast.com>, "caasp-beta at lists.suse.co
> > > > m" <caasp-beta at lists.suse.com>
> > > >
> > > > Subject: Re: [caasp-beta] [Newsletter] Re: RE : kubectl
> > > > requires username and password
> > > >
> > > >
> > > >
> > > >
> > > > Hi Dan.
> > > >
> > > > In the log you’ve provided you’re using the admin server for
> > > > the –s argument I believe.
> > > >
> > > > You must use https://<your-master-fqdn>:8443 as the address for
> > > > the k8s master node (noting correct port and https).
> > > >
> > > > Please let us know how you get on.
> > > >
> > > > Rob
> > > >
> > > >
> > > >
> > > >
> > > > ----
> > > > Rob de Canha-Knight
> > > >
> > > > EMEA Platform and Management Technical Strategist
> > > >
> > > > SUSE
> > > >
> > > > rob.decanha-knight at suse.com
> > > > (Fuze/VOIP) +44 (0) 1635 937689
> > > >
> > > > (M) +44 (0) 7392 087303
> > > > (TW)
> > > > rssfed23
> > > >
> > > > ----
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > From:
> > > > <caasp-beta-bounces at lists.suse.com> on behalf of Dan Elder <DEl
> > > > der at novacoast.com>
> > > >
> > > > Date: Tuesday, 3 October 2017 at 05:15
> > > >
> > > > To: "caasp-beta at lists.suse.com" <caasp-beta at lists.suse.com>
> > > >
> > > > Subject: Re: [caasp-beta] [Newsletter] Re: RE : kubectl
> > > > requires username and password
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > I haven't had any luck authentication with caasp-cli
> > > > unfortunately. The credentials I supply work fine for Velum
> > > > but caasp-cli says they're invalid (output attached). Is there
> > > > some log I can pull from the admin node or somewhere else to
> > > > troubleshoot this? I've done 2 installs and gotten the same
> > > > result both times.
> > > > Thanks,
> > > >
> > > > Dan
> > > >
> > > >
> > > > On 09/27/2017 08:04 AM, Paul Gonin wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > It should be on the media so you can install it on the admin
> > > > > node
> > > > >
> > > > >
> > > > > It is installed by default on admin node.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > You can also get (currently) rpms for different openSUSE/SUSE
> > > > > flavors
> > > > >
> > > > >
> > > > > https://build.opensuse.org/repositories/devel:CaaSP:Head:Cont
> > > > > rollerNode/caasp-cli
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > And there is also a windows Build from Rob
> > > > >
> > > > >
> > > > > https://github.com/rssfed23/caasp-cli-windows/releases
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Tested / works but not supported (yet, but I assume to come)
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Once you have caasp-cli
> > > > >
> > > > >
> > > > >
> > > > > export KUBECONFIG=<pathtokubeconfig> (set
> > > > > KUBECONFIG=kubeconfig
> > > > > in windows cmd shell)
> > > > >
> > > > >
> > > > > caasp-cli login -u caasp-user -p caasp-password -s
> > > > > https://caasp.fqdn:6443
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > and then you can use kubectl as previously
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > For caasp-user and caasp-password you can use caasp admin
> > > > > credentials.
> > > > >
> > > > >
> > > > > You can also create users in local ldap
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > rgds
> > > > >
> > > > >
> > > > > Paul
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Le mercredi 27 septembre 2017 à 14:52 +0000, Ns, Rushi a
> > > > > écrit :
> > > > >
> > > > > > Thanks, where can I download . I see from github I can’t
> > > > > > download the link .
> > > > > >
> > > > > > https://github.com/kubic-project/caasp-cli
> > > > > >
> > > > > >
> > > > > >
> > > > > > Best Regards,
> > > > > >
> > > > > > Rushi.
> > > > > > I MAY BE ONLY ONE PERSON, BUT I CAN BE ONE PERSON WHO MAKES
> > > > > > A DIFFERENCE
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > From:
> > > > > > Paul Gonin
> > > > > > <pgonin at suse.com>
> > > > > >
> > > > > > Date: Tuesday, September 26, 2017 at 1:31 PM
> > > > > >
> > > > > > To: "caasp-beta at lists.suse.com"
> > > > > > <caasp-beta at lists.suse.com>, Rushi NS
> > > > > > <rushi.ns at sap.com>
> > > > > >
> > > > > > Subject: RE : [caasp-beta] kubectl requires username and
> > > > > > password
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > With RC1, RBAC is available
> > > > > >
> > > > > >
> > > > > > Consequence is that you have to use caasp-ctl to login to
> > > > > > CaaSP and modify your kubectl and inject credentials in it.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Rgds
> > > > > >
> > > > > >
> > > > > > Paul
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > -------- Message d'origine --------
> > > > > >
> > > > > >
> > > > > > De : "Ns, Rushi"
> > > > > > <rushi.ns at sap.com>
> > > > > >
> > > > > >
> > > > > > Date : 26/09/2017 22:04 (GMT+01:00)
> > > > > >
> > > > > >
> > > > > >
> > > > > > À : SUSE Beta Program
> > > > > > <beta-programs at lists.suse.com>,
> > > > > > caasp-beta at lists.suse.com
> > > > > >
> > > > > >
> > > > > > Objet : [caasp-beta] kubectl requires username and password
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > >>> "Ns, Rushi" 09/26/2017 21:04 >>>
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > >
> > > > > > I setup new cluster with this release and everything
> > > > > > worked. I have 3 masters/10 workers ..looks fine VELUM web
> > > > > > page as well and I have downloaded
> > > > > > kubeconfig and tried to do some workload test but issue
> > > > > > with access cluster.
> > > > > >
> > > > > >
> > > > > > I have issue with using KUBECTL command line ..whatever
> > > > > > “kubectl” I run requires permission. I setup velum with my
> > > > > > userid email and password, I thought
> > > > > > it requires that and I tried but its not ?
> > > > > >
> > > > > > I have also tried root (linux) master/workers but it
> > > > > > doesn’t take that too?
> > > > > >
> > > > > >
> > > > > > Does anyone know what is the issue.
> > > > > >
> > > > > >
> > > > > > kubectl get cluster-info
> > > > > >
> > > > > >
> > > > > > kubectl get nodes
> > > > > > Please enter Username:
> > > > > > rushi.ns at sap.com
> > > > > > Please enter Password: *********
> > > > > > Error from server
> > > > > > (Forbidden): User "system:anonymous" cannot list nodes at
> > > > > > the cluster scope. (get nodes)
> > > > > >
> > > > > > kubectl get nodes
> > > > > > Please enter Username: admin
> > > > > > Please enter Password: ********
> > > > > > Unable to connect to the
> > > > > > server: x509: certificate is valid for 172.24.0.1,
> > > > > > 172.16.18.0, 127.0.0.1, 172.16.18.1, 10.48.164.142,
> > > > > > not 10.48.164.144
> > > > > >
> > > > > > kubectl get nodes
> > > > > > Please enter Username: root
> > > > > > Please enter Password: ********
> > > > > > Unable to connect to the
> > > > > > server: x509: certificate is valid for 172.24.0.1,
> > > > > > 172.16.22.0, 127.0.0.1, 172.16.22.1, 10.48.164.141,
> > > > > > not 10.48.164.144
> > > > > >
> > > > > > Best Regards,
> > > > > >
> > > > > > Rushi.
> > > > > > I MAY BE ONLY ONE PERSON, BUT I CAN BE ONE PERSON WHO MAKES
> > > > > > A DIFFERENCE
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > From:
> > > > > > <caasp-beta-bounces at lists.suse.com> on behalf of SUSE Beta
> > > > > > Program
> > > > > > <beta-programs at lists.suse.com>
> > > > > >
> > > > > > Reply-To: SUSE Beta Program
> > > > > > <beta-programs at lists.suse.com>
> > > > > >
> > > > > > Date: Friday, September 22, 2017 at 7:48 AM
> > > > > >
> > > > > > To: "caasp-beta at lists.suse.com"
> > > > > > <caasp-beta at lists.suse.com>
> > > > > >
> > > > > > Subject: [caasp-beta] [ANNOUNCE] SUSE Container as a
> > > > > > Service Platform 2 RC 1 is available!
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Having trouble viewing this email? Please check the plain
> > > > > > text version of it with your mailer.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > We are happy to announce
> > > > > > SUSE CaaS Platform 2
> > > > > > Release Candidate 1!
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Download
> > > > > > ›
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Please check out our dedicated
> > > > > > SUSE CaaS Platform Beta web page, where you will find all
> > > > > > the information needed around SUSE CaaS Platform Beta.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > What’s New with SUSE CaaS Platform 2 RC 1?
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > K8s Multi-Master: Kubernetes Multi Master for building
> > > > > > High-Availability clusters.
> > > > > >
> > > > > > caasp-cli: It's the new command line client for interacting
> > > > > > with a CaaS Platform cluster.
> > > > > > See for details.
> > > > > >
> > > > > > Dex: Dex is an identity service that uses OpenID Connect to
> > > > > > drive authentication for other
> > > > > > apps. See for details.
> > > > > >
> > > > > > OpenLDAP2: OpenLDAP2 running on an SLE12 container guest.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Things to consider for this Beta?
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > DHCP
> > > > > >
> > > > > >
> > > > > > Your DHCP server should provide resolveable hostnames. If
> > > > > > this is not the case like with libvirt/KVM, you should
> > > > > > consider providing one yourself by appending this kernel
> > > > > > parameter
> > > > > > "hostname=HOSTNAME" during installation.
> > > > > >
> > > > > > However, the kubeconfig file downloaded from the Dashboard
> > > > > > could contain an incorrect "server" hostname that should be
> > > > > > replaced with the IP address of your Master. For more
> > > > > > information
> > > > > > read: https://en.opensuse.org/SDB:Linuxrc#Network_Configur
> > > > > > ation
> > > > > >
> > > > > >
> > > > > > Autoyast/VMX-Images
> > > > > >
> > > > > >
> > > > > > If you install via autoyast or one of the provided VMX beta
> > > > > > images (KVM,Xen,VMware,...) please set a password or SSH
> > > > > > key via cloud-init to be able to login.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Release
> > > > > > plan ›
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Release
> > > > > > Notes ›
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Documentation
> > > > > > ›
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Have fun beta testing!
> > > > > >
> > > > > > Your SUSE Linux Enterprise Team
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Please refer to our dedicated
> > > > > > SUSE CaaSP Beta Program webpage for any general
> > > > > > information. However, do not hesitate to contact us at
> > > > > > beta-programs at lists.suse.com if you have any questions.
> > > > > > You received this email because you're signed up to get
> > > > > > updates from us.
> > > > > >
> > > > > > Click here to unsubscribe.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > caasp-beta mailing list
> > > > > > caasp-beta at lists.suse.com
> > > > > > http://lists.suse.com/mailman/listinfo/caasp-beta
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > caasp-beta mailing list
> > > > > caasp-beta at lists.suse.com
> > > > > http://lists.suse.com/mailman/listinfo/caasp-beta
> > > >
> > > >
> > > > --
> > > > Senior Engineer
> > > > Linux Services Manager
> > > > Novacoast, Inc.
> > > > Mobile: (310) 243-6971
> > > > Office: (800) 949-9933 x1337
> > > > http://www.novacoast.com/
> > > > _______________________________________________
> > > > caasp-beta mailing list
> > > > caasp-beta at lists.suse.com
> > > > http://lists.suse.com/mailman/listinfo/caasp-beta
> > >
> > >
> > >
> > >
> > >
> > > _________________________________________________________________
> > > _____
> > >
> > > This email has been scanned by the Symantec Email Security.cloud
> > > service.
> > >
> > > For more information please visit http://www.symanteccloud.com
> > >
> > > _________________________________________________________________
> > > _____
> > >
> > >
> > >
> > > This e-mail and any files transmitted with it are confidential
> > > and may be legally privileged. If you receive it in error or are
> > > not the intended recipient you must not copy, distribute or take
> > > any action in reliance upon it. Instead, please notify us
> > > immediately
> > > by telephoning +44 (20) 74820223 and delete the material from
> > > your systems. Smartodds is a business carried on by Smartodds
> > > Limited, a company registered with the Registrar of Companies for
> > > England and Wales with number 05108548. Registered office: Unit
> > > 540
> > > Highgate Studios, 53-79 Highgate Road, London NW5 1TL
> >
> >
> >
> > ___________________________________________________________________
> > ___
> >
> > This email has been scanned by the Symantec Email Security.cloud
> > service.
> >
> > For more information please visit http://www.symanteccloud.com
> >
> > ___________________________________________________________________
> > ___
> >
> >
> >
> > This e-mail and any files transmitted with it are confidential and
> > may be legally privileged. If you receive it in error or are not
> > the intended recipient you must not copy, distribute or take any
> > action in reliance upon it. Instead, please notify us immediately
> > by telephoning +44 (20) 74820223 and delete the material from your
> > systems. Smartodds is a business carried on by Smartodds Limited, a
> > company registered with the Registrar of Companies for England and
> > Wales with number 05108548. Registered office: Unit 531
> > Highgate Studios, 53-79 Highgate Road, London NW5 1TL
> >
> >
> >
> > ___________________________________________________________________
> > ___
> >
> > This email has been scanned by the Symantec Email Security.cloud
> > service.
> >
> > For more information please visit http://www.symanteccloud.com
> >
> > ___________________________________________________________________
> > ___
> >
> >
> >
> > This e-mail and any files transmitted with it are confidential and
> > may be legally privileged. If you receive it in error or are not
> > the intended recipient you must not copy, distribute or take any
> > action in reliance upon it. Instead, please notify us immediately
> > by telephoning +44 (20) 74820223 and delete the material from your
> > systems. Smartodds is a business carried on by Smartodds Limited, a
> > company registered with the Registrar of Companies for England and
> > Wales with number 05108548. Registered office: Unit 540
> > Highgate Studios, 53-79 Highgate Road, London NW5 1TL
>
>
>
> _____________________________________________________________________
> _
>
> This email has been scanned by the Symantec Email Security.cloud
> service.
>
> For more information please visit http://www.symanteccloud.com
>
> _____________________________________________________________________
> _
>
>
>
> This e-mail and any files transmitted with it are confidential and
> may be legally privileged. If you receive it in error or are not the
> intended recipient you must not copy, distribute or take any action
> in reliance upon it. Instead, please notify us immediately
> by telephoning +44 (20) 74820223 and delete the material from your
> systems. Smartodds is a business carried on by Smartodds Limited, a
> company registered with the Registrar of Companies for England and
> Wales with number 05108548. Registered office: Unit 531
> Highgate Studios, 53-79 Highgate Road, London NW5 1TL
>
>
>
>
>
>
>
>
> _______________________________________________
> caasp-beta mailing list
> caasp-beta at lists.suse.com
> http://lists.suse.com/mailman/listinfo/caasp-beta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.suse.com/pipermail/caasp-beta/attachments/20171004/2b6b45fa/attachment.htm>
More information about the caasp-beta
mailing list