[sles-beta] [ANNOUNCE] SLES 11 SP3 Beta4 available
Guang Su
gsu at axway.com
Mon Apr 15 10:29:46 MDT 2013
I am seeing the same issue with same hardware configuration. I don't understand why 2nd disk would have impact on Auotyast partitioning.
SLES11 - SP3 (Beta 4)
Disk /dev/sda: 898.3 GB, 898319253504 bytes
255 heads, 63 sectors/track, 109214 cylinders, total 1754529792 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000bdb75
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 272383 135168 83 Linux
/dev/sda2 272384 21254143 10490880 83 Linux
/dev/sda3 21254144 40130559 9438208 82 Linux swap / Solaris
/dev/sda4 40130560 1754529791 857199616 83 Linux
parted -l
Model: DELL PERC 6/i (scsi)
Disk /dev/sda: 898GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 139MB 138MB primary ext3 boot, type=83
2 139MB 10.9GB 10.7GB primary ext3 type=83
3 10.9GB 20.5GB 9665MB primary linux-swap(v1) type=82
4 20.5GB 898GB 878GB primary ext3 type=83
lsscsi
[0:0:32:0] enclosu DP BACKPLANE 1.07 -
[0:2:0:0] disk DELL PERC 6/i 1.22 /dev/sda
[1:0:0:0] cd/dvd TEAC DVD-ROM DV-28SW R.2A /dev/sr0
[3:0:0:0] disk iDRAC LCDRIVE 0323 /dev/sdb
[4:0:0:0] cd/dvd iDRAC Virtual CD 0323 /dev/sr1
[4:0:0:1] disk iDRAC Virtual Floppy 0323 /dev/sdc
SLES11 - SP2
Disk /dev/sda: 898.3 GB, 898319253504 bytes
255 heads, 63 sectors/track, 109214 cylinders, total 1754529792 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006c7a9
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 272383 135168 83 Linux
/dev/sda2 272384 21254143 10490880 83 Linux
/dev/sda3 21254144 1754529791 866637824 5 Extended
/dev/sda5 21256192 40130559 9437184 82 Linux swap / Solaris
/dev/sda6 40132608 1754507263 857187328 83 Linux
parted -l
Model: DELL PERC 6/i (scsi)
Disk /dev/sda: 898GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 139MB 138MB primary ext3 boot, type=83
2 139MB 10.9GB 10.7GB primary ext3 type=83
3 10.9GB 898GB 887GB extended type=05
5 10.9GB 20.5GB 9664MB logical linux-swap(v1) type=82
6 20.5GB 898GB 878GB logical ext3 type=83
lsscsi
[0:0:32:0] enclosu DP BACKPLANE 1.07 -
[0:2:0:0] disk DELL PERC 6/i 1.22 /dev/sda
[1:0:0:0] cd/dvd TEAC DVD-ROM DV-28SW R.2A /dev/sr0
[3:0:0:0] disk iDRAC LCDRIVE 0323 /dev/sdb
[4:0:0:0] cd/dvd iDRAC Virtual CD 0323 /dev/sr1
[4:0:0:1] disk iDRAC Virtual Floppy 0323 /dev/sdc
Thanks
--Guang
-----Original Message-----
From: sles-beta-bounces at lists.suse.com [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Matthias G. Eckermann
Sent: Monday, April 15, 2013 8:56 AM
To: SUSE Linux Enterprise Server Authorized Beta Program
Subject: Re: [sles-beta] [ANNOUNCE] SLES 11 SP3 Beta4 available
On 2013-04-15 T 15:50 +0000 Guang Su wrote:
> No, there's only 1 HDD on the system (DELL PowerEdge R720). The below
> sample is coming from 2 server. One running SP2 and the other one
> running SP3 beta 4. Both installation were done with PXe installation
> using autoyast. Does SD card or USB flash drive consider as 2nd disk?
Most probably yes. Please make sure that you compares the _exact_ same hardware configuration.
so long -
MgE
[...]
> -----Original Message-----
> From: sles-beta-bounces at lists.suse.com
> [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Kai Dupke
> Sent: Monday, April 15, 2013 1:42 AM
> To: sles-beta at lists.suse.com
> Subject: Re: [sles-beta] [ANNOUNCE] SLES 11 SP3 Beta4 available
>
> On 04/11/2013 06:34 PM, Guang Su wrote:
> > Hi,
> >
> > I ran into a strange issue with AutoYaST installation. When using
> > PXE installation with autoyast profile, the partition layout is not
> > same comparing to SP2. It appears the autoyast partitioning does not
> > create the extended partition. The same profile is used for
> > installation on both SP2 and SP3 beta 4
> >
> > on SP2
> > Device Boot Start End Blocks Id System
> > /dev/sda1 * 2048 272383 135168 83 Linux
> > /dev/sda2 272384 21254143 10490880 83 Linux
> > /dev/sda3 21254144 570949631 274847744 5 Extended
> > /dev/sda5 21256192 33849343 6296576 82 Linux swap / Solaris
> > /dev/sda6 33851392 570918911 268533760 83 Linux
> >
> > on SP3 beta 4
> > Device Boot Start End Blocks Id System
> > /dev/sda1 * 2048 272383 135168 83 Linux
> > /dev/sda2 272384 21254143 10490880 83 Linux
> > /dev/sda3 21254144 40130559 9438208 82 Linux swap / Solaris
> > /dev/sda4 40130560 1754529791 857199616 83 Linux
>
> Do you use different disks?
>
> How does the autoyast profile for the disks looks like?
>
> Might be the second disk layout is GPT based, parted shows the partition table type.
>
> greetings
> Kai Dupke
> Senior Product Manager
> Server Product Line
> --
> Phone: +49-(0)5102-9310828 Mail: kai.dupke at suse.com
> Mobile: +49-(0)173-5876766 WWW: www.suse.com
>
> SUSE Linux Products GmbH - Maxfeldstr. 5 - 90409 Nuernberg (Germany)
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG
> Nurnberg)
>
> _______________________________________________
> sles-beta mailing list
> sles-beta at lists.suse.com
> http://lists.suse.com/mailman/listinfo/sles-beta
>
--
Matthias G. Eckermann Senior Product Manager SUSE® Linux Enterprise
Phone: +49 30 44315731 Mobile: +49 179 2949448 E-Mail: mge at suse.com
SUSE LINUX Products GmbH Maxfeldstraße 5 90409 Nürnberg Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG Nürnberg) _______________________________________________
sles-beta mailing list
sles-beta at lists.suse.com
http://lists.suse.com/mailman/listinfo/sles-beta
More information about the sles-beta
mailing list