From vmoutoussamy at suse.com Thu Sep 1 02:01:15 2016 From: vmoutoussamy at suse.com (vmoutoussamy at suse.com) Date: Thu, 01 Sep 2016 08:01:15 +0000 Subject: [sles-beta] [ANNOUNCE] SUSE Linux Enterprise Server 12 SP2 RC 2 is available! Message-ID: <57c7e04bbada7_e5a3dde841001f@betaman.mail> TXT -------------- next part -------------- An HTML attachment was scrubbed... URL: From Julien.Wallior at sig.com Fri Sep 2 09:27:21 2016 From: Julien.Wallior at sig.com (Wallior, Julien) Date: Fri, 2 Sep 2016 15:27:21 +0000 Subject: [sles-beta] Ability to define local networks in wicked In-Reply-To: <5776668F.8090903@suse.de> References: <857eda52694648f7b0cb1cc63eba97c5@xchbal500.ds.susq.com> <5776668F.8090903@suse.de> Message-ID: <5f7478aaa3544ae289bc1fc7867c4267@xchbal500.ds.susq.com> Hi Marius -- Just checking if we think this is going to make it before the release. As far as I know, I don't see it in RC2. Julien > -----Original Message----- > From: sles-beta-bounces at lists.suse.com [mailto:sles-beta- > bounces at lists.suse.com] On Behalf Of Marius Tomaschewski > Sent: Friday, July 01, 2016 8:48 AM > To: sles-beta at lists.suse.com > Subject: Re: [sles-beta] Ability to define local networks in wicked > > Am 16.06.2016 um 01:16 schrieb Julien Wallior: > > Hi - > > I have had a feature request since sles12ga to define local networks > in wicked (I think it's under bug 914192). I had been told that it was > going to be available in sp2. So far it looks like it has been committed > yet (or I'm doing something wrong). > > Any thoughts as to when I can expect this feature to land? > > You mean to replace [add e.g. initcwnd option to them] routes created > by the kernel when an ip address gets created (-> bug 914192), right? > > It is on my TODO for the next two weeks. > > Gruesse / Regards, > Marius Tomaschewski , > -- > SUSE LINUX GmbH, GF: Felix Imend?rffer, Jane Smithard, > Dilip Upmanyu, Graham Norton, HRB 21284 (AG N?rnberg), > Maxfeldstra?e 5, 90409 N?rnberg, Germany > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta ________________________________ IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments. Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited. Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument. Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses. From Dick.Waite at softwareag.com Mon Sep 5 01:58:49 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Mon, 5 Sep 2016 07:58:49 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> Grand New Monday, Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... This is a part of a working log... 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda This is part of a non-working log 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false __R ________________________________________ From: Waite, Dick (External) Sent: 30 August 2016 09:20 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. __R rjw8-os-42-1:~ # yast2 Run command: /sbin/yast2 disk & *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] /sbin/dmraid(main+0x64)[0x401824] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] /sbin/dmraid[0x401855] ======= Memory map: ======== 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid 01263000-01284000 rw-p 00000000 00:00 0 [heap] 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] rjw8-os-42-1:~ # ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 10:32 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 For those who want to see a working version.... __R ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 07:59 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Morning, Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. Regards, __R ________________________________________ From: Waite, Dick (External) Sent: 28 August 2016 16:57 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Sunny Sunday, I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. I'm not in SAG Sept 30th and 31st. __R ________________________________________ From: Waite, Dick (External) Sent: 23 August 2016 13:04 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Tuesday August 23, 2016, I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... __R -----Original Message----- From: Waite, Dick (External) Sent: Dienstag, 16. August 2016 10:11 To: 'Vincent Moutoussamy' Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: RE: [sles-beta] Yast Expert Partitioner Grand Sunny Tuesday, August 16, 2016 It's still an issue with RC1 Vincent. ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Freitag, 12. August 2016 17:23 To: Waite, Dick (External) Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner Hi, Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). Have a nice week-end, Regards -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: > > Many Thanks Arvin, > > I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. > > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(createBackupState):8065 comp:true > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-messages.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", > "/tmp", "/usr/local"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", > "/var/run", "/tmp", "/var/lock"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > rjw5-12-2-02:~ # hostnamectl > Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: > rjw5-12-2-02 > Icon name: computer-vm > Chassis: vm > Machine ID: 84fe036142867102e170848d515a752d > Boot ID: 292213543b8a4fce91b5a29d27e23e1d > Virtualization: vmware > Operating System: SUSE Linux Enterprise Server 12 SP2 > CPE OS Name: cpe:/o:suse:sles:12:sp2 > Kernel: Linux 4.4.15-53-default > Architecture: x86-64 > > > rjw5-12-2-02:~ # uname -a > Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC > 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux > > > -----Original Message----- > From: sles-beta-bounces at lists.suse.com > [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell > Sent: Montag, 1. August 2016 11:03 > To: sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >> SUSE can I run this in a debug mode to try and find out where the issues are ? > > Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: > > [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" > > Maybe some external command is very slow. > > Kind Regards, > Arvin > > -- > Arvin Schnell, > Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: > Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG > N?rnberg) Maxfeldstra?e 5 > 90409 N?rnberg > Germany > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 > Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt > HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich > (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd > Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory > Board: Dr. Andreas Bereczky - http://www.softwareag.com > > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From Dick.Waite at softwareag.com Mon Sep 5 02:03:41 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Mon, 5 Sep 2016 08:03:41 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 09:58 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Grand New Monday, Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... This is a part of a working log... 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda This is part of a non-working log 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false __R ________________________________________ From: Waite, Dick (External) Sent: 30 August 2016 09:20 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. __R rjw8-os-42-1:~ # yast2 Run command: /sbin/yast2 disk & *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] /sbin/dmraid(main+0x64)[0x401824] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] /sbin/dmraid[0x401855] ======= Memory map: ======== 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid 01263000-01284000 rw-p 00000000 00:00 0 [heap] 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] rjw8-os-42-1:~ # ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 10:32 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 For those who want to see a working version.... __R ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 07:59 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Morning, Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. Regards, __R ________________________________________ From: Waite, Dick (External) Sent: 28 August 2016 16:57 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Sunny Sunday, I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. I'm not in SAG Sept 30th and 31st. __R ________________________________________ From: Waite, Dick (External) Sent: 23 August 2016 13:04 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Tuesday August 23, 2016, I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... __R -----Original Message----- From: Waite, Dick (External) Sent: Dienstag, 16. August 2016 10:11 To: 'Vincent Moutoussamy' Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: RE: [sles-beta] Yast Expert Partitioner Grand Sunny Tuesday, August 16, 2016 It's still an issue with RC1 Vincent. ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Freitag, 12. August 2016 17:23 To: Waite, Dick (External) Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner Hi, Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). Have a nice week-end, Regards -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: > > Many Thanks Arvin, > > I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. > > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(createBackupState):8065 comp:true > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-messages.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", > "/tmp", "/usr/local"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", > "/var/run", "/tmp", "/var/lock"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > rjw5-12-2-02:~ # hostnamectl > Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: > rjw5-12-2-02 > Icon name: computer-vm > Chassis: vm > Machine ID: 84fe036142867102e170848d515a752d > Boot ID: 292213543b8a4fce91b5a29d27e23e1d > Virtualization: vmware > Operating System: SUSE Linux Enterprise Server 12 SP2 > CPE OS Name: cpe:/o:suse:sles:12:sp2 > Kernel: Linux 4.4.15-53-default > Architecture: x86-64 > > > rjw5-12-2-02:~ # uname -a > Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC > 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux > > > -----Original Message----- > From: sles-beta-bounces at lists.suse.com > [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell > Sent: Montag, 1. August 2016 11:03 > To: sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >> SUSE can I run this in a debug mode to try and find out where the issues are ? > > Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: > > [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" > > Maybe some external command is very slow. > > Kind Regards, > Arvin > > -- > Arvin Schnell, > Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: > Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG > N?rnberg) Maxfeldstra?e 5 > 90409 N?rnberg > Germany > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 > Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt > HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich > (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd > Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory > Board: Dr. Andreas Bereczky - http://www.softwareag.com > > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From Dick.Waite at softwareag.com Mon Sep 5 02:27:11 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Mon, 5 Sep 2016 08:27:11 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag>, <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> Many Thanks to A.N.Other, I was asked not to give a name... NetworkManager 0.9.8.10-3.9 works NetworkManager 1.0.12-7.2 gives the issue If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 10:03 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 09:58 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Grand New Monday, Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... This is a part of a working log... 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda This is part of a non-working log 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false __R ________________________________________ From: Waite, Dick (External) Sent: 30 August 2016 09:20 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. __R rjw8-os-42-1:~ # yast2 Run command: /sbin/yast2 disk & *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] /sbin/dmraid(main+0x64)[0x401824] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] /sbin/dmraid[0x401855] ======= Memory map: ======== 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid 01263000-01284000 rw-p 00000000 00:00 0 [heap] 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] rjw8-os-42-1:~ # ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 10:32 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 For those who want to see a working version.... __R ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 07:59 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Morning, Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. Regards, __R ________________________________________ From: Waite, Dick (External) Sent: 28 August 2016 16:57 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Sunny Sunday, I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. I'm not in SAG Sept 30th and 31st. __R ________________________________________ From: Waite, Dick (External) Sent: 23 August 2016 13:04 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Tuesday August 23, 2016, I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... __R -----Original Message----- From: Waite, Dick (External) Sent: Dienstag, 16. August 2016 10:11 To: 'Vincent Moutoussamy' Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: RE: [sles-beta] Yast Expert Partitioner Grand Sunny Tuesday, August 16, 2016 It's still an issue with RC1 Vincent. ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Freitag, 12. August 2016 17:23 To: Waite, Dick (External) Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner Hi, Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). Have a nice week-end, Regards -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: > > Many Thanks Arvin, > > I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. > > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(createBackupState):8065 comp:true > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-messages.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", > "/tmp", "/usr/local"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", > "/var/run", "/tmp", "/var/lock"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > rjw5-12-2-02:~ # hostnamectl > Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: > rjw5-12-2-02 > Icon name: computer-vm > Chassis: vm > Machine ID: 84fe036142867102e170848d515a752d > Boot ID: 292213543b8a4fce91b5a29d27e23e1d > Virtualization: vmware > Operating System: SUSE Linux Enterprise Server 12 SP2 > CPE OS Name: cpe:/o:suse:sles:12:sp2 > Kernel: Linux 4.4.15-53-default > Architecture: x86-64 > > > rjw5-12-2-02:~ # uname -a > Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC > 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux > > > -----Original Message----- > From: sles-beta-bounces at lists.suse.com > [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell > Sent: Montag, 1. August 2016 11:03 > To: sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >> SUSE can I run this in a debug mode to try and find out where the issues are ? > > Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: > > [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" > > Maybe some external command is very slow. > > Kind Regards, > Arvin > > -- > Arvin Schnell, > Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: > Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG > N?rnberg) Maxfeldstra?e 5 > 90409 N?rnberg > Germany > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 > Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt > HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich > (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd > Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory > Board: Dr. Andreas Bereczky - http://www.softwareag.com > > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From vmoutoussamy at suse.com Mon Sep 5 07:55:46 2016 From: vmoutoussamy at suse.com (Vincent Moutoussamy) Date: Mon, 5 Sep 2016 15:55:46 +0200 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> Message-ID: Hi, Please create a bug report for this! here is the direct link to create the bug report: https://bugzilla.suse.com/enter_bug.cgi?product=Beta%20SUSE%20Linux%20Enterprise%20Server%2012%20SP2 Thanks, Regards, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 05 Sep 2016, at 10:27, Waite, Dick (External) wrote: > > Many Thanks to A.N.Other, I was asked not to give a name... > > NetworkManager 0.9.8.10-3.9 works > NetworkManager 1.0.12-7.2 gives the issue > > If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. > > So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... > > __R > > > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 10:03 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 09:58 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Grand New Monday, > > Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" > So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE > I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... > > This is a part of a working log... > > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay > 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known > 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > This is part of a non-working log > > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins > 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false > > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 30 August 2016 09:20 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. > > __R > > rjw8-os-42-1:~ # yast2 > Run command: /sbin/yast2 disk & > *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** > ======= Backtrace: ========= > /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] > /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] > /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] > /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] > /sbin/dmraid(main+0x64)[0x401824] > /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] > /sbin/dmraid[0x401855] > ======= Memory map: ======== > 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid > 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid > 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid > 01263000-01284000 rw-p 00000000 00:00 0 [heap] > 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so > 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 > 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 > 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so > 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 > 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 > 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 > 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 > 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 > 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] > 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] > 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] > ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] > rjw8-os-42-1:~ # > > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 10:32 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > For those who want to see a working version.... > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 07:59 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Morning, > > Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... > > 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) > 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease > 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. > > Regards, > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 28 August 2016 16:57 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Sunny Sunday, > > I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. > I'm not in SAG Sept 30th and 31st. > > __R > > ________________________________________ > From: Waite, Dick (External) > Sent: 23 August 2016 13:04 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Tuesday August 23, 2016, > > I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. > Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... > > __R > > > > -----Original Message----- > From: Waite, Dick (External) > Sent: Dienstag, 16. August 2016 10:11 > To: 'Vincent Moutoussamy' > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: RE: [sles-beta] Yast Expert Partitioner > > Grand Sunny Tuesday, August 16, 2016 > > It's still an issue with RC1 Vincent. > > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution > > Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins > > __R > > -----Original Message----- > From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] > Sent: Freitag, 12. August 2016 17:23 > To: Waite, Dick (External) > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > Hi, > > Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). > > Have a nice week-end, > > Regards > -- > Vincent Moutoussamy > SUSE Beta Program and SDK Project Manager > > > >> On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: >> >> Many Thanks Arvin, >> >> I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. >> >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: >> verbose:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8184 ret:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(createBackupState):8065 comp:true >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 >> Given filename: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 >> Preferring subdir: /usr/share/YaST2 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 >> Looking for: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 >> Looking in /usr/lib64/yui >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 >> Could NOT find libyui-qt-graph.so.7 by looking recursive inside >> /usr/lib64/yui >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] >> YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": >> libyui-qt-graph.so.7: cannot open shared object file: No such file or >> directory >> >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-spanner.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-messages.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Partitions.rb:150 EfiBoot ret:false >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", >> "/tmp", "/usr/local"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", >> "/var/run", "/tmp", "/var/lock"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(getIgnoreFstab):3145 device:/dev/sda >> >> rjw5-12-2-02:~ # hostnamectl >> Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: >> rjw5-12-2-02 >> Icon name: computer-vm >> Chassis: vm >> Machine ID: 84fe036142867102e170848d515a752d >> Boot ID: 292213543b8a4fce91b5a29d27e23e1d >> Virtualization: vmware >> Operating System: SUSE Linux Enterprise Server 12 SP2 >> CPE OS Name: cpe:/o:suse:sles:12:sp2 >> Kernel: Linux 4.4.15-53-default >> Architecture: x86-64 >> >> >> rjw5-12-2-02:~ # uname -a >> Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC >> 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux >> >> >> -----Original Message----- >> From: sles-beta-bounces at lists.suse.com >> [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell >> Sent: Montag, 1. August 2016 11:03 >> To: sles-beta at lists.suse.com >> Subject: Re: [sles-beta] Yast Expert Partitioner >> >> On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >>> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >>> SUSE can I run this in a debug mode to try and find out where the issues are ? >> >> Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: >> >> [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" >> >> Maybe some external command is very slow. >> >> Kind Regards, >> Arvin >> >> -- >> Arvin Schnell, >> Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: >> Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG >> N?rnberg) Maxfeldstra?e 5 >> 90409 N?rnberg >> Germany >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta >> >> Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 >> Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt >> HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich >> (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd >> Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory >> Board: Dr. Andreas Bereczky - http://www.softwareag.com >> >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta > > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com > From Dick.Waite at softwareag.com Mon Sep 5 08:11:59 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Mon, 5 Sep 2016 14:11:59 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag>, Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E07414@hqmbx6.eur.ad.sag> Many Thanks Vincent. Bug 997254 created. I also found looking at my home_office machines, they would like to install NetworkManager 1.0.12-7.2 but "libqdialogsolve" is missing so it does not install, so I do not get the issues with Partitioner. I'm in Ireland from early tomorrow until next Monday. Not much internet access, Blackberry only, so I hope there is enough on the forum and this bug to fix this. I checked with SLES12-SP1 and there is was either no NetworkManager or NetworkManager 0.9.8.10-3.9 which works Okay with Partitioner. Enjoy, __R ________________________________________ From: Vincent Moutoussamy [vmoutoussamy at suse.com] Sent: 05 September 2016 15:55 To: Waite, Dick (External) Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner - RC2 Hi, Please create a bug report for this! here is the direct link to create the bug report: https://bugzilla.suse.com/enter_bug.cgi?product=Beta%20SUSE%20Linux%20Enterprise%20Server%2012%20SP2 Thanks, Regards, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 05 Sep 2016, at 10:27, Waite, Dick (External) wrote: > > Many Thanks to A.N.Other, I was asked not to give a name... > > NetworkManager 0.9.8.10-3.9 works > NetworkManager 1.0.12-7.2 gives the issue > > If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. > > So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... > > __R > > > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 10:03 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 09:58 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Grand New Monday, > > Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" > So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE > I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... > > This is a part of a working log... > > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay > 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known > 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > This is part of a non-working log > > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins > 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false > > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 30 August 2016 09:20 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. > > __R > > rjw8-os-42-1:~ # yast2 > Run command: /sbin/yast2 disk & > *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** > ======= Backtrace: ========= > /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] > /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] > /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] > /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] > /sbin/dmraid(main+0x64)[0x401824] > /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] > /sbin/dmraid[0x401855] > ======= Memory map: ======== > 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid > 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid > 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid > 01263000-01284000 rw-p 00000000 00:00 0 [heap] > 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so > 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 > 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 > 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so > 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 > 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 > 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 > 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 > 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 > 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] > 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] > 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] > ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] > rjw8-os-42-1:~ # > > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 10:32 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > For those who want to see a working version.... > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 07:59 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Morning, > > Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... > > 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) > 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease > 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. > > Regards, > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 28 August 2016 16:57 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Sunny Sunday, > > I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. > I'm not in SAG Sept 30th and 31st. > > __R > > ________________________________________ > From: Waite, Dick (External) > Sent: 23 August 2016 13:04 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Tuesday August 23, 2016, > > I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. > Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... > > __R > > > > -----Original Message----- > From: Waite, Dick (External) > Sent: Dienstag, 16. August 2016 10:11 > To: 'Vincent Moutoussamy' > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: RE: [sles-beta] Yast Expert Partitioner > > Grand Sunny Tuesday, August 16, 2016 > > It's still an issue with RC1 Vincent. > > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution > > Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins > > __R > > -----Original Message----- > From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] > Sent: Freitag, 12. August 2016 17:23 > To: Waite, Dick (External) > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > Hi, > > Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). > > Have a nice week-end, > > Regards > -- > Vincent Moutoussamy > SUSE Beta Program and SDK Project Manager > > > >> On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: >> >> Many Thanks Arvin, >> >> I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. >> >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: >> verbose:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8184 ret:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(createBackupState):8065 comp:true >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 >> Given filename: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 >> Preferring subdir: /usr/share/YaST2 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 >> Looking for: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 >> Looking in /usr/lib64/yui >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 >> Could NOT find libyui-qt-graph.so.7 by looking recursive inside >> /usr/lib64/yui >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] >> YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": >> libyui-qt-graph.so.7: cannot open shared object file: No such file or >> directory >> >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-spanner.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-messages.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Partitions.rb:150 EfiBoot ret:false >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", >> "/tmp", "/usr/local"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", >> "/var/run", "/tmp", "/var/lock"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(getIgnoreFstab):3145 device:/dev/sda >> >> rjw5-12-2-02:~ # hostnamectl >> Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: >> rjw5-12-2-02 >> Icon name: computer-vm >> Chassis: vm >> Machine ID: 84fe036142867102e170848d515a752d >> Boot ID: 292213543b8a4fce91b5a29d27e23e1d >> Virtualization: vmware >> Operating System: SUSE Linux Enterprise Server 12 SP2 >> CPE OS Name: cpe:/o:suse:sles:12:sp2 >> Kernel: Linux 4.4.15-53-default >> Architecture: x86-64 >> >> >> rjw5-12-2-02:~ # uname -a >> Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC >> 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux >> >> >> -----Original Message----- >> From: sles-beta-bounces at lists.suse.com >> [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell >> Sent: Montag, 1. August 2016 11:03 >> To: sles-beta at lists.suse.com >> Subject: Re: [sles-beta] Yast Expert Partitioner >> >> On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >>> Grand Day, I'm running Beta5 and on my VMware machines the "partitioner" is taking a long time in the "initializing" phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I "clone" with VMware from SP1 to SP2 and with SP1 the "partitioner" is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >>> SUSE can I run this in a debug mode to try and find out where the issues are ? >> >> Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: >> >> [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" >> >> Maybe some external command is very slow. >> >> Kind Regards, >> Arvin >> >> -- >> Arvin Schnell, >> Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: >> Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG >> N?rnberg) Maxfeldstra?e 5 >> 90409 N?rnberg >> Germany >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta >> >> Software AG - Sitz/Registered office: Uhlandstra?e 12, 64297 >> Darmstadt, Germany - Registergericht/Commercial register: Darmstadt >> HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich >> (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd >> Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory >> Board: Dr. Andreas Bereczky - http://www.softwareag.com >> >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta > > > Software AG - Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany - Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com > From vmoutoussamy at suse.com Wed Sep 14 10:07:00 2016 From: vmoutoussamy at suse.com (Vincent Moutoussamy) Date: Wed, 14 Sep 2016 18:07:00 +0200 Subject: [sles-beta] [sleha-beta] Next SLE 12 SP2 Release will be Beta 5 instead of RC1 In-Reply-To: <2B54A03A-C7F2-4AF3-B95F-10BBBA8AC7A2@suse.com> References: <651E0F07-6AFA-4FB4-AED4-1E79FA0653E0@suse.com> <2B54A03A-C7F2-4AF3-B95F-10BBBA8AC7A2@suse.com> Message-ID: Hi there, Sorry for the slow poke back but I didn?t saw a bug report for this issue. Could you confirm that your issue can be reproduce with RC2? If so, please create a bug report[1] for it so we can investigate. Regards, [1]https://www.suse.com/support/beta-program/secure/beta-guideline.html#bugzilla -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 12 Aug 2016, at 17:24, Vincent Moutoussamy wrote: > > Hi, > > Sorry for the lack of response on this, could you reproduce this issue with RC1? > If yes please create a bug report. > > Have a nice week-end, > > Regards, > -- > Vincent Moutoussamy > SUSE Beta Program and SDK Project Manager > > > >> On 01 Aug 2016, at 12:16, etso-srva-linux wrote: >> >> Hi, >> >> I don't manage to find an issue when I try to install a SLES12 (SP2-Beta5) virtual host on a SLES11 hypervisor. >> I get this error message : >> >> Error >> Execution of command "[["/usr/sbin/shim-install", "--config-file=/boot/grub2/grub.cfg" >> Exit code: 1 >> Error output: Unrecognized option '--no-nvram' >> >> Here is my AutoYast file for bootloader part : >> >> >> >> splash=verbose showopts >> auto >> false >> false >> console >> 10 >> crashkernel=108M,high >> true >> >> grub2-efi >> >> >> Any ideas ? >> Thanks in advance ! >> >> Cordialement / Best Regards >> >> Pour toutes questions / For any request : >> 1 ? http://www.gnurou.org/writing/smartquestionsfr >> 2 ? Contacter notre Tiers Maintenance d?Exploitation (TME) / Contact our Third Party Maintenance (TPM) - [22-94-39] >> 3 ? Contacter notre permanence / Contact our technical support team [22-92-40] >> >> PAUL RIBEIRO >> DF/DDCE/ISTA/DSEP/ULES >> 'Linux (SuSE) Administrator ' >> >> 0384469482 (229482) 0680627278 >> BESSONCOURT / EXTENSION RIVE DROITE / B19 >> Courrier interne : SX.BES.12 >> Adresse : Zone de la Porte de Belfort - 2, route du Strat?gique ? 90160 Bessoncourt >> >> >> >> >> >> >> >> C1-INTERNAL >> >> -----Message d'origine----- >> De : Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] >> Envoy? : vendredi 29 juillet 2016 15:54 >> ? : etso_srva_linux - BFetso_1 >> Objet : Re: [sleha-beta] Next SLE 12 SP2 Release will be Beta 5 instead of RC1 >> >> Bonjour, >> >> Hummm je vois cela dans le changelog de la Beta2: >> - do not install grub2 with --no-nvram on non-EFI systems (bnc#980108) >> Mais dans le rapport de bug je ne vois pas l?erreur avec shim-install. >> >> Je vous recommande de poser la question sur la mailing list sles-beta at lists.suse.com, >> nous verrons ce que les beta testeurs et l?engineering vous r?pondent. >> >> Bon week-end, >> >> Cordialement, >> -- >> Vincent Moutoussamy >> SUSE Beta Program and SDK Project Manager >> >> >> >>> On 29 Jul 2016, at 14:58, etso-srva-linux wrote: >>> >>> Bonjour Vincent, >>> >>> Un petit mail pour te signaler un probl?me que je rencontre lorsque j'installe une VM SLES12 (avec la Beta 5) sur un hyperviseur SLES11. >>> L'installation se plante au niveau du shim-install avec l'erreur suivante : >>> >>> Error >>> Execution of command "[["/usr/sbin/shim-install", "--config-file=/boot/grub2/grub.cfg" >>> Exit code: 1 >>> Error output: Unrecognized option '--no-nvram' >>> >>> Extrait de l'autoyast d'install pour la partie bootloader : >>> >>> >>> >>> splash=verbose showopts >>> auto >>> false >>> false >>> console >>> 10 >>> crashkernel=108M,high >>> true >>> >>> grub2-efi >>> >>> >>> Ce type de probl?me vous a t-il ?t? d?j? remont? ? >>> Une id?e ? une erreur de ma part ? >>> >>> Merci pour ton retour. >>> >>> Bonne fin de semaine. >>> >>> Cordialement / Best Regards >>> >>> Pour toutes questions / For any request : >>> 1 - http://www.gnurou.org/writing/smartquestionsfr >>> 2 - Contacter notre Tiers Maintenance d'Exploitation (TME) / Contact our Third Party Maintenance (TPM) - [22-94-39] >>> 3 - Contacter notre permanence / Contact our technical support team [22-92-40] >>> >>> >>> PAUL RIBEIRO >>> DF/DDCE/ISTA/DSEP/ULES >>> 'Linux (SuSE) Administrator ' >>> >>> 0384469482 (229482) 0680627278 >>> BESSONCOURT / EXTENSION RIVE DROITE / B19 >>> Courrier interne : SX.BES.12 >>> Adresse : Zone de la Porte de Belfort - 2, route du Strat?gique - 90160 Bessoncourt >>> >>> >>> >>> >>> >>> >>> -----Message d'origine----- >>> De : sleha-beta-bounces at lists.suse.com [mailto:sleha-beta-bounces at lists.suse.com] De la part de Vincent Moutoussamy >>> Envoy? : jeudi 21 juillet 2016 16:04 >>> ? : sles-beta; sled-beta at lists.suse.com; sleha-beta at lists.suse.com >>> Objet : [sleha-beta] Next SLE 12 SP2 Release will be Beta 5 instead of RC1 >>> >>> Dear Beta participants, >>> >>> You are all aware that according to the communicated schedule you would get >>> this week RC1 images. >>> >>> Calling an image a "Release Candidate" requires the fulfillment of certain >>> criteria. This is the case on all but one platform. >>> >>> After careful consideration of the existing bugs, the criteria and the time >>> left until FCS we came to the conclusion that we cannot justify an "RC" tag. >>> >>> Therefore we have named this milestone "Beta 5", and will in consequence rename >>> the following milestones, too. So RC2 will be RC1, and RC3 will be RC2. >>> >>> At this point in time, we do NOT plan to change the GMC nor the GM date. Also >>> the targeted FCS date is still the same. >>> >>> Last but not least, we are at the final preparation stage for the release of >>> Beta 5, we will send more information soon. >>> >>> Your SUSE Linux Enterprise Team >>> -- >>> Vincent Moutoussamy >>> SUSE Beta Program and SDK Project Manager >>> >>> >>> >>> _______________________________________________ >>> sleha-beta mailing list >>> sleha-beta at lists.suse.com >>> http://lists.suse.com/mailman/listinfo/sleha-beta >> > > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta From Dick.Waite at softwareag.com Tue Sep 20 04:14:37 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Tue, 20 Sep 2016 10:14:37 +0000 Subject: [sles-beta] s390x issues Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E0BB16@hqmbx6.eur.ad.sag> Grand Day, I could update a SLES12 SP-1 GA to SLES12 SP-2 Beta2. I can not update a SLES12 SP-1 GA to SLES12 SP-2 RC2. The update looks Okay but on the re-ipl there are issues with /dev and LV's I did not see any nags on the list so I thought I'm making an error somewhere. I don't think I'm making an error, I think something is broken. Looking forward to seeing if RC3 can update from SLES12 SP-1 GA FWIW I can not update from SLES12 SP-2 Beta2 to RC2 either. Again the /dev and LV's are not there... __R Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From vmoutoussamy at suse.com Fri Sep 23 07:05:22 2016 From: vmoutoussamy at suse.com (Vincent Moutoussamy) Date: Fri, 23 Sep 2016 15:05:22 +0200 Subject: [sles-beta] SLE 12 SP2 RC3 release being a little bit delayed. Message-ID: Hello everyone, SLE 12 SP2 RC3 is a little bit late, as we are still struggling with some issue on SLED and the Workstation Extension. Reason is bsc#1000648, which is about a migration tool for NetworkManager being a little bit to ecstatic. The issue only appears if you do an upgrade from a previous version, and only on the two mentioned products, so we decided to start to release the rest of the family, giving you time for downloading and tests over the weekend, SLED and SLE-WE will follow as soon as we have images with a fix and correct behavior of the migration part. Unfortunately we cannot say yet if this will be the case before the weekend, but we are working on it. We are sorry for the inconvenience. Stay tuned, the official SLES and SLEHA images and announcements should be released soon. Your SUSE Linux Enterprise Team, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager From beta-programs at lists.suse.com Fri Sep 23 16:13:39 2016 From: beta-programs at lists.suse.com (beta-programs at lists.suse.com) Date: Fri, 23 Sep 2016 22:13:39 +0000 Subject: [sles-beta] [ANNOUNCE] SUSE Linux Enterprise Server 12 SP2 RC 3 is available! Message-ID: <57e5a913f8ac_7289777e78476c2@betaman.mail> o Updated Mesa (security/bugfix/feature) - U_r300g-Set-R300_VAP_CNTL-on-RSxxx-to-avoid-triangle-flickering.patch: Initialize RSxxx chipsets correctly (bsc#985650) - baselibs.conf: Remove libwayland-egl1 and Mesa-libOpenCL as they are not being built. - Add u_add_llvm_codegen_dependencies.patch to link to libLLVMCodegen to fix cyclic linking problems. bsc#981975 ----------------------------------------------------------------------------- o Updated MozillaFirefox (security/bugfix/feature) - Fix for aarch64 Firefox startup crash (bsc#991344) ----------------------------------------------------------------------------- o Updated NetworkManager-gnome (security/bugfix/feature) - Add nm-applet-migration-tool.patch: Build and autostart migration tool in SLED to migrate old VPN settings (bsc#952123). - Drop nm-applet-fix-missing-translation.patch: This patch leads to conflict between accelerate keys. And it won't fix the missing translations, since the problem comes from those untranslated POs. - Drop nm-applet-build-don-t-try-to-build-bluetooth-widget-with-bluez5.patch: Fixed in upstream. translation in ce-page-team.ui(bsc#988533). + Since the plugin API no longer exists(bnc#876552). disable the bluetooth plugin when BlueZ 5 is used(bnc#876552). ----------------------------------------------------------------------------- o Updated NetworkManager (security/bugfix/feature) - Modify nm-don-t-consider-not-needed-secrets-for-has_system_secr.diff: Remove two assertions that brings error message (bsc#882801). clickable (bsc#985332). ----------------------------------------------------------------------------- o Updated OpenIPMI (security/bugfix/feature) - Update spec file to properly install sysconfig.ipmi (bsc#989985, bsc#988443) ----------------------------------------------------------------------------- o Updated PackageKit (security/bugfix/feature) - Drop PackageKit-1.0.1-fix-bashisms.patch: this patch has been submitted upstream for discussion (gh#hughsie/PackageKit#162). If accepted, we'll inherit with a future update, if declined, it is not important enough to carry around. The code it touches is only used by the internal test suite. - Drop PackageKit-fix-offline-trigger.patch: in line with upstreams expectation we package /var/cache/PackageKit. With this present the symlink produced for offline update can correctly symlink to an existing directory. - Stop Providing/Obsoleting opensuse-codecs-installer, it was dropped more than 5 years ago. - Add 0001-zypp-Return-error-if-invalid-package-IDs-are-detecte.patch: Fix segfaults when detecting invalid package IDs (gh#hughsie/PackageKit#148). - Add bsc#951592-zypp-Raise-priority-of-ZYPP-stack-updates-if-a-secur.patch: zypp: Raise priority of ZYPP stack updates if a security patch is shadowed. (bsc#951592) - Add PackageKit-gstreamer1.patch: Build against gstreamer 1.0, not 0.10. ----------------------------------------------------------------------------- o Updated aaa_base (security/bugfix/feature) - fix regression introduced by fix for bnc#971567 (bnc#996442) ----------------------------------------------------------------------------- o Updated accountsservice (security/bugfix/feature) - Update accountsservice-sysconfig.patch: Flush the buffer before shut down the GIOChannel, otherwise we get a truncated setting file. The problem has caused the switching autologin in gnome-control-center breaking /etc/sysconfig/displaymanager (bsc#998107). ----------------------------------------------------------------------------- o Updated apache2-mod_nss (security/bugfix/feature) - update to 1.0.14 (fate#320764, bsc#979688) OpenSSL ciphers stopped parsing at +, CVE-2016-3099 Created valgrind suppression files to ease debugging Implement SSL_PPTYPE_FILTER to call executables to get the key password pins. Can be used to prompt with systemd. Improvements to migrate.pl Update default ciphers to something more modern and secure Check for host and netstat commands in gencert before trying to use them Add server support for DHE ciphers Extract SAN from server/client certificates into env Fix memory leaks and other coding issues caught by clang analyzer Add support for Server Name Indication (SNI) (#1010751) Add support for SNI for reverse proxy connections Add RenegBufferSize? option Add support for TLS Session Tickets (RFC 5077) Fix logical AND support in OpenSSL cipher compatibility Correctly handle disabled ciphers (CVE-2015-5244) Implement a slew more OpenSSL cipher macros Fix a number of illegal memory accesses and memory leaks Support for SHA384 ciphers if they are available in NSS Add compatibility for mod_ssl-style cipher definitions (#862938) Add TLSv1.2-specific ciphers Completely remove support for SSLv2 Add support for sqlite NSS databases (#1057650) Compare subject CN and VS hostname during server start up Add support for enabling TLS v1.2 Don't enable SSL 3 by default (CVE-2014-3566) Fix CVE-2013-4566 Move nss_pcache to /usr/libexec Support httpd 2.4+ - drop mod_nss_migrate.pl and use upstream migrate script instead * add mod_nss-migrate.patch - drop almost all our patches (upstream) * 0001-SNI-check-with-NameVirtualHosts.patch * mod_nss-CVE-2013-4566-NSSVerifyClient.diff * mod_nss-PK11_ListCerts_2.patch * mod_nss-add_support_for_enabling_TLS_v1.2.patch * mod_nss-array_overrun.patch * mod_nss-cipherlist_update_for_tls12-doc.diff * mod_nss-cipherlist_update_for_tls12.diff * mod_nss-clientauth.patch * mod_nss-compare_subject_CN_and_VS_hostname.patch * mod_nss-gencert.patch * mod_nss-httpd24.patch * mod_nss-lockpcache.patch * mod_nss-negotiate.patch * mod_nss-no_shutdown_if_not_init_2.patch * mod_nss-overlapping_memcpy.patch * mod_nss-pcachesignal.h * mod_nss-proxyvariables.patch * mod_nss-reseterror.patch * mod_nss-reverse_proxy_send_SNI.patch * mod_nss-reverseproxy.patch * mod_nss-sslmultiproxy.patch * mod_nss-tlsv1_1.patch * mod_nss-wouldblock.patch * update-ciphers.patch - add automake and libtool to BuildRequires - use systemd-ask-password to prompt for a certificate passphrase (bsc#972968) * drop obsolete mod_nss-bnc863518-reopen_dev_tty.diff ----------------------------------------------------------------------------- o Updated apache2 (security/bugfix/feature) - add NotifyAccess=all to service files [bsc#980663] ----------------------------------------------------------------------------- o Updated apparmor (security/bugfix/feature) - update apparmor-profiles-samba4.4.diff to deny net_admin thus squashing benign DENIED messages. (boo#991901) - add apparmor-profiles-samba4.4.diff to provide changes needed for samba4.4 versions (bsc#990006) ----------------------------------------------------------------------------- o Updated autofs (security/bugfix/feature) - Rebuild against SLE 12-SP2's libtirpc. (fate#320393) ----------------------------------------------------------------------------- o Updated autoyast2 (security/bugfix/feature) - Adding an missing PREP partition for PPC, BUT not for Power8 system (powerNV). PowerNV do not have PREP partitions and do not need any because they do not call grub2-install (bnc#989392). - 3.1.151 - Fix IP detection in AutoYaST installation rules in order to find the correct profile when "ip route" mentions "metric" (bnc#997548). - 3.1.150 ----------------------------------------------------------------------------- o Updated bluez (security/bugfix/feature) - Add patches: Fix build with GLib 2.48: Since GLib 2.39 calling g_source_remove on already removed source is causing critical warning. * unit-Fix-test-failures-with-glib-2.39.0.patch Fix /gobex/test_header_encode_connid test name was duplicated. * unit-Fix-gobex-unit-tests.patch Add new hciattach_bcm43xx in Makefile.in * built_fixed.patch - Add patches for RPi3 bluetooth support(bsc#995059) * 0001-tools-add-bcm43xx-specific-init-in-hciattach.patch * 0002-tools-fix-headers-for-bcm43xx.patch * 0003-hciattach-bcm43xx-Use-final-baudrate-to-download-the.patch * 0004-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch * 0005-Move-the-43xx-firmware-into-lib-firmware.patch ----------------------------------------------------------------------------- o Updated brltty (security/bugfix/feature) - Install polkit file (bsc#930242). - Add brltty-5.3.1-udev-systemd.patch: fix udev rules to work with systemd. From upstream. - Add missing service_add_pre call. Add missing argument to fdupes. - Fix misplacement of /69-brltty.rules in the root directory because pkgconfig(udev) was not requested, which led to _udevdir being the empty string. - Modify systemd service file to correct brltty path (boo#917176). ----------------------------------------------------------------------------- o Updated cairo (security/bugfix/feature) - Add cairo-xlib-double-free.patch to fix double free in _get_image_surface(); patch taken from upstream git (fdo#91967, boo#997189). ----------------------------------------------------------------------------- o Removed check (XXX) ----------------------------------------------------------------------------- o Updated cmake (security/bugfix/feature) - Allow definition of builddir and builder to be overridable bnc#995752 - Update to cmake 3.5.2 as it is last of 3.5 series and contains bugfixes for ninja ----------------------------------------------------------------------------- o Updated cogl (security/bugfix/feature) - Add 0001-fix-build-failure-with-Werror-undef.patch: Fix build failure for SLE (bgo#770533). - Update to version 1.22.2: + Skip journal dumping if not supported (bgo#728355). + Support glMapBufferRange from ES3 (bgo#728355). + Improvements in the KMS winsys (bgo#756926, bgo#758073). + Require gettext 0.19 to avoid hacks (bgo#760285). + Respect the Wayland spec for EGL surface creation (bgo#765351). + Updated translations. - Drop cogl-GLES-Support-glMapBufferRange.patch and cogl-fix-black-login-screen.patch: Fixed upstream. ----------------------------------------------------------------------------- o Updated curl (security/bugfix/feature) - Update curl-CVE-2016-5420.patch to fix incorrect reuse of client certificates with NSS (bsc#997420 CVE-2016-7141) - Add curl-bsc991746.patch (bsc#991746) fixing a performance regression with FTP - Add curl-CVE-2016-5419.patch (bsc#991389 CVE-2016-5419) - Add curl-CVE-2016-5420.patch (bsc#991390 CVE-2016-5420) - Add curl-CVE-2016-5421.patch (bsc#991391 CVE-2016-5421) ----------------------------------------------------------------------------- o Updated desktop-file-utils (security/bugfix/feature) - Fix suse-update-mime-defaults: Ensure the directory structure to write the cache info to is in place (boo#976973). ----------------------------------------------------------------------------- o Updated dracut (security/bugfix/feature) - rd.iscsi.waitnet should default to false in order for dracut to wait for the network devices (bsc#997598) * add 0199-rd-iscsi-waitnet-default-false.patch - 95multipath: Replace 'grep' with 'sed' for shutdown scripts (bsc#999220) * modify 0306-90multipath-add-shutdown-script.patch - Add missing whitespace for md raid suse kernel param parsing (bsc#970215) * modify: 0059-99suse-Add-SUSE-specific-initrd-parsing.patch - Fix IFS separater in net-lib.sh (bsc#996141) * modify: 0125-40network-separate-mask-and-prefix.patch ----------------------------------------------------------------------------- o Updated fetchmail (security/bugfix/feature) - Made the helper script introduced in last change return exit status 5 on configuration errors instead of 1, which should make it a bit less confusing (bsc#979534) ----------------------------------------------------------------------------- o Updated file-roller (security/bugfix/feature) - Drop genisoimage Requires: We no longer want to hard require it. ----------------------------------------------------------------------------- o Added gcc6 (feature) ## WARNING - the following diff is a head -20 proposal * Fri Aug 26 2016 rguenther at suse.com - Update to gcc-6-branch head (r239768). * Includes GCC 6.2 release. * Wed Aug 17 2016 jslaby at suse.com - gcc6-devel: require gmp-devel and mpc-devel * Wed Aug 17 2016 mliska at suse.cz - Update HSA_RUNTINE_LIB in gcc6-hsa-enablement.patch * Mon Aug 15 2016 rguenther at suse.com - Update to gcc-6-branch head (r239476). * includes GCC 6.2 RC1 - Make sure newlib crosses for the same target conflict * Fri Aug 12 2016 afaerber at suse.de - Clean up newlib handling in spec files ----------------------------------------------------------------------------- o Updated gcr (security/bugfix/feature) - Add openSUSE conditional macro and description tag for existing patches in specfile. ----------------------------------------------------------------------------- o Updated gd (security/bugfix/feature) - security update: * CVE-2016-6905 [bsc#995034] + gd-CVE-2016-6905.patch - security update: * CVE-2016-6214 [bsc#991436] + gd-CVE-2016-6214.patch * CVE-2016-6132 [bsc#987577] + gd-CVE-2016-6132.patch * CVE-2016-6128 [bsc#991710] + gd-CVE-2016-6128.patch * CVE-2016-6207 [bsc#991622] + gd-CVE-2016-6207.patch * CVE-2016-6161 [bsc#988032] + gd-CVE-2016-6161.patch - security update: * CVE-2016-5116 [bsc#982176] + gd-CVE-2016-5116.patch ----------------------------------------------------------------------------- o Updated gdb (security/bugfix/feature) - Add gdb-fix-bnc-994537.diff for ppc64le, fixing two testcases. [bnc#994537] - Add gdb-libiberty-demangler-fuzz.diff for fixing infinite recursion in demangler. [bnc#987637] - Amend gdb-glibc-vdso-workaround.patch to ignore further vdso filenames on ppc64 and s390x. [bnc#944105] ----------------------------------------------------------------------------- o Updated gdk-pixbuf (security/bugfix/feature) - Add fixes for some crashes, taken from upstream git (bsc#988745 bsc#991450 CVE-2016-6352): gdk-pixbuf-bgo768688-bmp-overflow.patch gdk-pixbuf-bgo768484-ico-set-errors.patch gdk-pixbuf-bgo769738-bmp-overflow.patch gdk-pixbuf-bgo769170-ico-headers.patch - Remove upstreamed patches: gdk-pixbuf-bgo758991.patch, 0001-pixops-Don-t-overflow-variables-when-shifting-them.patch, 0001-ico-Protect-against-overflow.patch, gdk-pixbuf-bsc960155-divide-by-zero.patch, gdk-pixbuf-bsc948790-tga-dos.patch and gdk-pixbuf-2-32-overflow-fixes.patch. ----------------------------------------------------------------------------- o Updated gdm (security/bugfix/feature) - Add gdm-xsync-warnings.patch bsc#984103 -- Stop showing the warning message for user ----------------------------------------------------------------------------- o Updated gjs (security/bugfix/feature) - Update to version 1.45.4: + Release out args before freeing caller-allocated structs (bgo#768413). + Marshal variable array-typed signal arguments (bgo#761659). + Marshal all structs in out arrays correctly (bgo#761658). + Call setlocale() before processing arguments (bgo#760424). + Build fixes and improvements: bgo#737702, bgo#761072, bgo#761366, bgo#765905, bgo#767368. ----------------------------------------------------------------------------- o Updated glib2-branding-SLE (security/bugfix/feature) - Set default power button action to "shutdown" for consistency with SLE12SP1 (bsc#996342). ----------------------------------------------------------------------------- o Updated glib2 (security/bugfix/feature) - Update to version 2.48.2: + Bugs fixed: bgo#547200, bgo#673101, bgo#700756, bgo#725902, bgo#728207, bgo#730187, bgo#746685, bgo#750257, bgo#753231, bgo#755439, bgo#760115, bgo#760423, bgo#761810, bgo#766211, bgo#766899, bgo#766933, bgo#767172, bgo#767218, bgo#767824, bgo#767949, bgo#768453, bgo#768504, bgo#768551, bgo#768560, bgo#768806, bgo#769027. + Updated translations. glib2-missing-annotations.patch. ----------------------------------------------------------------------------- o Updated glibc (security/bugfix/feature) - resolv-assertion-failure.patch: resolv: Always set *resplen2 out parameter in send_dg (bsc#994576, BZ #19791) ----------------------------------------------------------------------------- o Updated gnome-calculator (security/bugfix/feature) - Add history-entry.ui and history-view.ui as sources: they were missing in the tarball. - Update to version 3.20.2: + lib: prevents segfault when elements of division to zero have null assigned tokens (bgo#769364). + Updated translations. ----------------------------------------------------------------------------- o Updated gnome-control-center (security/bugfix/feature) - Add gnome-control-center-info-never-use-gnome-software.patch: On SLE12-SP2 and Leap42.2, never search for gnome-software as an option when checking for updates in info panel, because we use gpk-update-viewer (bsc#999336). - Update gnome-control-center-add-alacarte-for-sle.patch: Rebase on top of rebased gnome-control-center-allow-extra-tools-in-shell.patch. - Update gnome-control-center-allow-extra-tools-in-shell.patch: + Fix leak of strings. + Add tools with category X-GNOME-DesktopSettings into the personal g-c-c category to enable itweb-settings. + Disable logspam in absence of optional components (bnc#866235 bsc#952008). - Drop Mesa-demo-x Requires: No longer needed. Fixes boo#996633. - Drop gnome-control-center-bnc862415-timezone.patch: Fixed upstream (bnc#862415). - Drop gnome-control-center-bnc865632-disable-popup-for-NM.patch: Fixed upstream (bnc#865632). - Drop gnome-control-center-bnc894394-hide-firewall-zone-entry.patch: Fixed upstream (bnc#894394). - Drop gnome-control-center-bnc947761-fix-color-dialog-translations.patch: Fixed upstream (bnc#947761). - Drop gnome-control-center-change-password-i18n.patch: Fixed upstream (bnc#880303). - Drop gnome-control-center-datetime-i18n.patch: Fixed upstream (bnc#884425 bgo#732585). - Drop gnome-control-center-display-login-region.patch: Fixed upstream (bsc#955322). - Drop gnome-control-center-fix-wifi-list.patch: Replaced by 0001-network-Fix-empty-Wifi-list.patch (bsc#870322). - Rebase gcc-private-connection.patch (bnc#751211). - Rebase gnome-control-center-allow-extra-tools-in-shell.patch (bnc#866235). - Rebase gnome-control-center-probe-radius-server-cert.patch: Toggle with_cacert_patch to 1 to enable it (bnc#574266). - Set define with_cacert_patch to 0, needed now since we have non-rebased patches in NetworkManager. - Add gnome-control-center-fix-wifi-list.patch: Fix Wifi list not showing APs correctly (bsc#870322). Fix bug login language button in region list disappear (bsc#955322). - Add gnome-control-center-bnc947761-fix-color-dialog-translations.patch Fix the unlocalised heading on the Add Profile dialog on Color panel (bnc#947761). - Add gnome-control-center-Pyongyang-Time.patch: North Korea changed its timezone to UTC+08:30. - Add timezone_8.5.png, timezone_8.5_dim.png, timezone_9.png and timezone_9_dim.png as source files: patch is not willing to patch binary files (bsc#951590 boo#941290 bgo#753643). - Add gnome-control-center-890979-change-remote-passwd.patch: Enable remote user to change password in user panel (bsc#890979). - Add gnome-control-center-bnc894394-hide-firewall-zone-entry.patch Hide Firewall zone entry in Network panel (bnc#894394). - Add gnome-control-center-bnc862415-timezone.patch: Allow changing timezone without root privs (bnc#862415). - Add gnome-control-center-datetime-i18n.patch: Make punctuation translatable in datetime preferences (bnc#884425 bgo#732585). - Update gnome-control-center-bnc865632-disable-popup-for-NM.patch: Remove the device add / remove button in Network panel when NM is not running (bnc#865632). - Add gnome-control-center-bnc865632-disable-popup-for-NM.patch: Remove the popup error message in Network (bnc#865632). + gnome-control-center-upower-changed-signal.patch -- update for libupower-glib API changes, from 3.11. - Up libupower-glib dependency ----------------------------------------------------------------------------- o Updated gnome-menus (security/bugfix/feature) - Add 0001-desktop-entries-support-multiple-desktops-in-XDG_CUR.patch, 0001-desktop-entries-fix-trivial-bug-in-handling-of-multi.patch: Backport upstream commit b4546ab and 4befe76. Parse XDG_CURRENT_DESKTOP correctly when it specifies multiple desktops (bsc#988595, bgo#741505). ----------------------------------------------------------------------------- o Updated gnome-online-accounts (security/bugfix/feature) - Update to version 3.20.4: + Fix a few leaks in goa-identity-service (bgo#756431). + Updated translations. ----------------------------------------------------------------------------- o Updated gnome-packagekit (security/bugfix/feature) - Installation of local files has been removed from gpk, avoid registration of bad rpm mime handler. See boo#941862, bgo#766896 ensure gpk-update-viewer is restarted when restart_suggested is part of the update flags. Initial patch by Roy Ley Mu (bnc#881245). ----------------------------------------------------------------------------- o Updated gnome-settings-daemon (security/bugfix/feature) - Rename gnome-settings-daemon-shutdown-with-power-button.patch to gnome-settings-daemon-more-power-button-actions.patch: Also add back the "interactive" power button action for consistency with SLES11 behavior (bsc#996342). - Also apply gnome-settings-daemon-shutdown-with-power-button.patch on openSUSE (boo#993381). - Add gnome-settings-daemon-shutdown-with-power-button.patch: Bring back "shutdown" as a configurable choice for power button. Even though upstream removed it due to "too destructive" and recommends using a custom shortcut, we still need it for bare metal servers without keyboards attched (bsc#996342). Check bgo#753713, bgo#755953 to learn why upstream removed the power button actions. ----------------------------------------------------------------------------- o Updated gnome-shell-extensions (security/bugfix/feature) - Enable SLE-Classic for Leap 42.2 bnc#999655 + modify SPEC to re-enable SLE-Classic for Leap 42.2 - Add bnc947381-Application-menu-selections-stop-working.patch: Fix application menu open issue. Upstream has this fixed but no related bug report (bnc947381). + There was a mismatch between the available space and declared icon size. + SPECFILE: a minor fix to avoid double unpacking the first source tarball. - Fix multiple issues related to windows grouping (bnc#933183) in SLE Classic + The old code contains multiple bugs for windows grouping display. + Fix missing AppButton for applications without desktop file in SLE Classic. - Fix click event "missing" for window buttons in SLE Classic (bnc#913204) + No separate patch file, changes are in sle-classic.tar.bz2 + "clicked" event in St.Button is not compatible with Clutter's event model. Though an upstream bug, but the exact cause is still unknown yet. Resort back to Clutter's native "button-press-event" to fix this for SLE Classic. + (bnc#899923). A dangled open menu would grab the focus and leave the system in a useless state. Close any open menus before any other action. + (bnc#862615) Thanks Marcus Moeller (m.moeller at opensuse.org) for offering highlighting patch. + (bnc#891919) Use Nautilus for all links in places menu and such avoids all unnecessary issues. + (bnc#877898) move notifications above the panel such that it doesn't cover part of the main panel. + Add callbacks for overview, fullscreen, monitor change event, such that the positioning&visibility of on-screen keyboard, message tray&widgets and panels are adapted accordingly (bnc#891560). + Offer a hack for restoring of xsettings.overrides. The counterpart is installed in Main._sessionLoaded (bnc#894048). + Hide the bottom panel so that the overview hiding animation works smoothly now. At least before we figure out why it doesn't work with the bottom panel. (improvement) - Add place-menu-handle-special-user-dirs-update.patch: Let place menu handles changes of special user directories properly (bnc#885490). - Add sle-classic-favorites-menu-at-end.patch: put the favorites at the end of the app catogories for accessibility reason (bnc#890989). - Remove Avatar symbol from system indicators (bnc#886569) + No separate patch file, changes are in sle-classic.tar.bz2 + It's not considered a good indication for log out - Add Logout symbol into system indicators, using 'sle-avatar' in SLE theme. (bnc#862615) + No separate patch file, changes are in sle-classic.tar.bz2 - Update gnome-shell-add-app-to-desktop.patch: add translate-update-upstream (bnc#882421). - Add gnome-shell-add-app-to-desktop.patch: Add 'open' 'Add to Favoriate' 'Add to Desktop' menu item to the app-menu (bnc#870580). + SLE Classic is now implemented as a separate extension + session mode files. A fork of 'window-list' extension combined with other SLE specific tweaks. + GNOME Classic is now in vanilla state and can be selected in Login. + NOTE: this depends on SLE Classic extension patch for GNOME Shell, see (request#35065). + add gnome-classic-exts-arrow-fix.patch - Add gnome-shell-use-env-var-for-mode.patch: use environment variable instead of command line to specify mode so that the session saving can work as expected (bnc#863709, bgo#720894). + Application menus, workspace&message indicators, window list switcher are all integrated on this panel. ----------------------------------------------------------------------------- o Updated gnome-shell (security/bugfix/feature) - Enable SLE-Classic for Leap 42.2 bnc#999655 + modify SPEC to re-enable SLE-Classic for Leap 42.2 - Fix gnome-shell-gdm-login-applet.patch (boo#995296) + Fix aboutMenu's distribution name to be more general, like openSUSE Leap support. - Update to version 3.20.4: + Free old backgrounds immediately (bgo#766353). + Adjust to flatpak PermissionStore API changes (bgo#766598). + calendar: Only hide dismissed occurrence of recurring event (bgo#748226). + Updated translations. - Drop gnome-shell-background-free-MetaBackground.patch: Fixed upstream. - Add gnome-shell-fix-missing-return.patch: Fix build, add missing return value in gnome-calendar. - Update gs-fate318433-prevent-same-account-multi-logins.patch: Make cancel button usable after login forbidden (bnc#991051, fate#318433). - Add gs-fate318433-prevent-same-account-multi-logins.patch: Prevent multiple simultaneous logins (Requires patched accountsservice)(fate#318433). - Add gnome-shell-970480-authprompt-wrapping-message.patch: operation fails in gdm greeter (bnc#970480). - Update gnome-shell-878951-hide-list-with-no-user.patch: Disable the user list if there is only root created (bnc#878951, bnc#980451) + Enable window-list extension in SLE Classic (fix for previous negligence) + RENAMED&UPDATED sle-classic-ext.patch to gs-sle-classic-ext.patch. + UPDATED SLEClassicExt.js. + gnome-shell-use-env-var-for-mode.patch - bnc948802-fix-user-logout-dialog-icon.patch - Add bnc963119-sle-fix-menu-navigation.patch: Fix the missing initial keyboard navigation for panel menus like application menu (bnc#963119). Do not manage the modal dialog positions on login screen to avoid the power dialog from disappearing (bnc#961920). 1. Disable most keys (including lock screen) for "endSessionDialog", e.g. logout, power off and etc. - Add gnome-shell-933768-fix-leaked-signals-in-login-screen.patch: Fix leaked signals which also causes login screen hangs after 3 failed user verifications (bsc#933768, bgo#738256). - Add background-image-caching-fix.patch: Fix a bug in image caching that results in malfunction in background update (bnc#926800). - Add dont-start-searchprovider-at-login.patch: + Inhibit autostart for search providers at login to have correct process hierarchy for Nautilus, which is essential for various environment vars and CWD setup (bnc#897153 bgo#708830). - Add gnome-shell-lock-bg-on-primary.patch: primary screen (bnc#894050). + NOTE: this commit work with relevant changes in 'gnome-shell-extensions'. + Restoring xsettings.overrides, which get set by SLE-Classic extension (bnc#894048). + Change the message tray positioning to adapt to fullscreen situation (bnc#891560). - Add vpn-indicator-and-menu-general-fix.patch: + Fix crash issue (bnc#890855). + Fix menu status and indicator: they behave very weird under some circumstances. The patch offers a solution, though it somehow limits user actions. - Add gnome-shell-hostname-refresh.patch: keep tracking of the hostname change (bnc#888806). + add animation list to cache animiations + use collect image when resolution changes + update time label every second in end session dialog (bnc#886132). + Preserve user-chosen session while in the same verification session (bnc#870560) - Move some development tools to devel subpackage (bnc#881020). NOTE: small modifications are made when applying these patche s. Also this "backport" has the following differences from GNOME 3.12: 1. Use the 3.8-version wired connection icons as they are already in the system. 2. Without other network connections, disconnected wired is always displayed instead of hiding it as in 3.12. 3. Cable unplugged as a status is shown explicitly in system menu instead of hiding the whole wired section as in upstream. The status text is also changed to be "cable unplugged" instead of the generic "unavailable". + Change the place where SLEClassicExt.js is loaded to avoid dependency issue. Mainly implements conditional arrow directions and conditional task panel positioning atm. Needed for the SLE Classic Mode to work in "gnome-shell-extension". + Add SLEClassicExt.js + Add sle-classic-ext.patch - Add gnome-shell-defer-loading-userlist.patch: load the user list until it is needed (bnc#869127, bgo#725905). - Update gnome-shell-gdm-login-applet.patch: remove the 'Welcome' prefix. - Add gnome-shell-use-env-var-for-mode.patch: Use Environment variable instead of command line to specify mode so that the session saving can work as expected (bnc#863709, bgo#720894). - Add gnome-shell-864872-unlock-by-mouse-motion.patch: when mouse moved over 100 pixels (bnc#864672). product name, hostname on an applet in the login interface (bnc#855739, fate#314545). + Misc bug fixes: bgo#709034, bgo#709263, bgo#698486, + Misc bug fixes: bgo#706542, bgo#706654, bgo#706005, + Other fixed bugs: bgo#698863, bgo#699799, bgo#699800, + Add shortcut to open application view directly (bgo#685738) ----------------------------------------------------------------------------- o Updated gnome-vfs2 (security/bugfix/feature) Porting some missing patches from SLE to openSUSE (bnc#832381). - Patch tagging: use valid tags. ----------------------------------------------------------------------------- o Updated gobject-introspection (security/bugfix/feature) - Remove 0001-typelib-compiler-properly-initialise-memory.patch, gobject-introspection-bgo729662-ownership-transfer.patch. - Add 0001-typelib-compiler-properly-initialise-memory.patch: typelib compiler writes uninitialised memory to typelib file (bnc#930584). - Add gobject-introspection-bgo729662-ownership-transfer.patch: which makes it possible for language bindings to know about ownership transfer for instance parameters so memory management can be performed correctly (bgo#729662). to be able to check files in /usr/bin and want to have them ----------------------------------------------------------------------------- o Updated grilo (security/bugfix/feature) - Add grilo-fix-32bit-build.patch: Fix build on i586 (bgo#769331). - Pass --disable-debug to configure: make use of fortified sources as passed in our optflags (-D_FORTIFY_SOURCE=2). - Update to version 0.3.2: + Bugs fixed: bgo#766386, bgo#769331, bgo#769830. + Updated translations. ----------------------------------------------------------------------------- o Updated grub2 (security/bugfix/feature) - Ignore partition tables on s390x. (bsc#935127) * grub2-s390x-08-workaround-part-to-disk.patch - Drop ethernet-pad-to-minumum-size.patch (bsc#994497) - Added grub2-s390x-07-add-image-param-for-zipl-setup.patch * Add --image switch to force zipl update to specific kernel (bsc#928131) ----------------------------------------------------------------------------- o Updated gsettings-desktop-schemas (security/bugfix/feature) - Remove gsettings-desktop-schemas-bnc872820-wm-button-layout.patch upstreamed. - Add gsettings-desktop-schemas-bnc872820-wm-button-layout.patch: This lets us have the correct defaults for the window manager's button layout, for the default session mode (i.e. not Classic) (bnc872820). ----------------------------------------------------------------------------- o Updated gspell (security/bugfix/feature) the current word is not checked (bgo#768306). ----------------------------------------------------------------------------- o Updated gstreamer-plugins-bad (security/bugfix/feature) - Disable libbs2b support when building on SLE. - Update to version 1.8.3 (boo#996937): + Bugs fixed: bgo#767492, bgo#769376, bgo#736227, bgo#768160, bgo#767553, bgo#761260, bgo#763044, bgo#763081, bgo#756866, bgo#768771, bgo#766662, bgo#766163, bgo#768146, bgo#766663, bgo#767792, bgo#767492, bgo#767635. + Updated translations. - Move libbs2b-devel BuildRequires and corresponding plugin to main package. There is no need for this to be in the addon one. ----------------------------------------------------------------------------- o Updated gstreamer-plugins-base (security/bugfix/feature) - Update to version 1.8.3 (boo#996937): + Bugs fixed: bgo#767689, bgo#768991, bgo#767712, bgo#768566, bgo#768249, bgo#766970, bgo#768361, bgo#768178, bgo#757472, bgo#767859. + Updated translations. ----------------------------------------------------------------------------- o Updated gstreamer-plugins-good (security/bugfix/feature) - Update to version 1.8.3 (boo#996937): + Bugs fixed: bgo#769773, bgo#762208, bgo#769514, bgo#747275, bgo#768509, bgo#768232, bgo#768623, bgo#768195, bgo#768268, bgo#753760, bgo#767980, bgo#766025, bgo#767680, bgo#767496. + Updated translations. ----------------------------------------------------------------------------- o Updated gstreamer (security/bugfix/feature) [x86_64,s390x,ppc64le,aarch64] - Update to version 1.8.3 (boo#996937): + Fix stepping in PAUSED state in certain circumstances. + Fix jackaudiosink hang when exiting. + Fix udpsrc receiving multicast packets not only from the selected multicast group. + Fix unnecessary decoding of unselected streams in GES. + Fix (multi)udpsink randomly not sending to clients. + Fix ALL\_BOTH probes not considering EVENT\_FLUSH. + Fix average input rate calculations in queue2. + Fix various locking issues causing deadlock in adaptivedemux. + Fix gst-libav encoders to correctly produce codec\_data in caps. + Add Wayland, Windows and Rasberry Pi support to the QML GL video sink. + Add support for building with OpenH264 1.6. + Add support for controlling deinterlacing in GES video sources. + Bugs fixed: bgo#769802, bgo#768649, bgo#766970, bgo#768141, bgo#767688, bgo#763770, bgo#767413, bgo#739289, bgo#762330. + Updated translations. - Drop separate spec file for gstreamer-doc. Due to this drop all conditionals for splitting out doc build. Also drop docbook-toys, docbook-utils, texlive-latex, texlive-latex-doc and transfig BuildRequires. Add doc subpackage to gstreamer spec and pass enable gtk-doc to configure. Note that we are building a much leaner doc package now. - Following the above, drop pre_checkin script, gstreamer-no-gtk-doc-for-reals.patch and gstreamer-revert-bogus-automake-version.patch and stop passing NOCONFIGURE, no longer needed. - Conditionally apply translations-update-upstream and gnome-patch-translation BuildRequires and macro for non-openSUSE only. ----------------------------------------------------------------------------- o Updated gtk-vnc (security/bugfix/feature) - Update to version 0.6.0: + Important changes: - Default to build with GTK-3, use --with-gtk=2.0 to override. + New features: - Add --with-tls-priority configure flag to set default TLS priority string. - Add a 'vnc-error' signal to report reason for disconnect. - Add support for fallback to GNUTLS system trust DB. + Bug fixes: - Fix crash on Windows with GTK3 checking realized state. - Fix XKB detection of keyboard mapping with Xwayland. - Switch back to XKB detection for Xwayland. - Remove duplicate cert expiry check. - Avoid misc compile warnings. - Add missing API docs + GObject introspection annotations. - Add missing GIO dep on gvnc library GObject introspection build. - Remove unused code. - Fix redraw on Win10. - Drop support for gnutls < 2.2.0. - Fix path to h2def script. - Update compiler warning detection to fix clang build. - Ignore cast align warnings to fix clang build. - Fix endianess inversion when setting pixel format. ----------------------------------------------------------------------------- o Updated gtk-vnc2 (security/bugfix/feature) - Update to version 0.6.0: + Important changes: - Default to build with GTK-3, use --with-gtk=2.0 to override. + New features: - Add --with-tls-priority configure flag to set default TLS priority string. - Add a 'vnc-error' signal to report reason for disconnect. - Add support for fallback to GNUTLS system trust DB. + Bug fixes: - Fix crash on Windows with GTK3 checking realized state. - Fix XKB detection of keyboard mapping with Xwayland. - Switch back to XKB detection for Xwayland. - Remove duplicate cert expiry check. - Avoid misc compile warnings. - Add missing API docs + GObject introspection annotations. - Add missing GIO dep on gvnc library GObject introspection build. - Remove unused code. - Fix redraw on Win10. - Drop support for gnutls < 2.2.0. - Fix path to h2def script. - Update compiler warning detection to fix clang build. - Ignore cast align warnings to fix clang build. - Fix endianess inversion when setting pixel format. ----------------------------------------------------------------------------- o Updated gtk2 (security/bugfix/feature) - Update to version 2.24.31 (CVE-2013-7447, bgo#703220): + Backport many file chooser entry fixes and cleanups. + Don't crash if invisible files are deleted. + Bugs fixed: bgo#555087, bgo#586367, bgo#635287, bgo#640698, bgo#648419, bgo#672271, bgo#679333, bgo#687196, bgo#703220 (CVE-2013-7447), bgo#720330, bgo#729927, bgo#737777, bgo#752707, bgo#756450, bgo#765120, bgo#765193, bgo#768163, bgo#764996, bgo#769126. - Rebase gtk2-bgo743166-remember-printing-authentication.patch. - Drop gtk2-bgo737777-fix-printing-authentication-crash.patch and gtk2-bnc957400-filechooserentry-update.patch: fixed upstream. - Fix update-alterntatives usage. - Add gtk2-bnc957400-filechooserentry-update.patch. This updates the Tab completion code in GtkFileChooser, so it works the same as in gtk3 (bnc#957400). The patch was associated with upstream commits: 55764ddd, 191d1cd90, 92d45e12, 8f9487f - Fix memory leak in gtk2-print-to-file.patch (bnc#839089, bgo#711177). - Add gtk2-default-printer.patch: save last-used printer as default (bgo#577642). ----------------------------------------------------------------------------- o Updated gtk3 (security/bugfix/feature) - Update to version 3.20.9: + Fix headerbar size allocation. + Use g_snprintf instead of snprintf. + Bugs fixed: bgo#769287, bgo#769603. + Updated translations. - Fix update-alternatives usage. - Add gtk3-bnc872820-headerbar-decoration-layout.patch: When applications run in Classic mode, and they use GtkHeaderBar for a client-side window's decoration, they lacked minimize/maximize buttons like those in "traditional" windows which are completely decorated by the window manager. This patch adds support for setting those buttons depending on the mode in which the desktop is running (bnc#872820). - Update to version 3.10.9: + Bugs fixed: bgo#495105, bgo#709914, bgo#721119, bgo#727487, bgo#728992, bgo#729670, bgo#566945, bgo#591258, bgo#692931, bgo#693200, bgo#701884, bgo#704456, bgo#712752, bgo#722058, bgo#722722, bgo#723121, bgo#723159, bgo#723183, bgo#723366, bgo#723390, bgo#723555, bgo#723621, bgo#723771, bgo#724008, bgo#724541, bgo#724631, bgo#724891, bgo#724895, bgo#725089, bgo#725172, bgo#725205, bgo#725225, bgo#725754, bgo#725824, bgo#725866, bgo#726136, bgo#726476, bgo#726717, bgo#726858, bgo#726859, bgo#726871, bgo#726996, bgo#727643 + Translation updates: Catalan, Kannada, Russian, Scottish Gaelic - Drop gtk3-gtkwindow-cleanup.patch: fixed upstream. - Update to version 3.10.7: + Bugs fixed: bgo#386569, bgo#709491, bgo#711298, bgo#719314, bgo#719970, bgo#719977, bgo#721700. + Updated translations. - No longer delete gtk-shell-client-protocol.h and gtk-shell-protocol.c: they are no longer part of the tarball. ----------------------------------------------------------------------------- o Updated guestfs-winsupport (security/bugfix/feature) - Fix the mount.ntfs symlinks to work even if ntfs-3g is installed on the machine. (fate#316274) - Cleanup hardcoded link in /sbin/mkfs.ntfs ----------------------------------------------------------------------------- o Updated harfbuzz (security/bugfix/feature) - Update to version 1.3.0: + Update to Unicode 9.0.0. + Move Javanese from Indic shaper to Universal Shaping Engine. + Allow MultipleSubst to delete a glyph (matching Windows engine). + Update Universal Shaping Engine to latest draft from Microsoft. + DirectWrite backend improvements. Note: this backend is for testing ONLY. + CoreText backend improvements with unreachable fonts. + Implement symbol fonts (cmap 3.0.0) in hb-ft and hb-ot-font. + Blacklist bad GDEF of more fonts (Tahoma & others). + Misc fixes. ----------------------------------------------------------------------------- o Updated hwinfo (security/bugfix/feature) - improved comment - document id data sources - find parent device - add support for mmc/sdio devices (bsc#996183) - add sdio id list - 21.31 ----------------------------------------------------------------------------- o Updated installation-images-SLES (security/bugfix/feature) - add iscsiuio (bsc#999658) - 14.268 - Small fix to IBM and SUSE branding - 14.267 ----------------------------------------------------------------------------- o Updated json-glib (security/bugfix/feature) - Update to version 1.2.2: + Add support for g_auto* macros. + Allow making JSON types optionally immutable, in order to allow efficient hashing and equality tests (bgo#756121). + Improve the build under MSVC. + Updated translations. ----------------------------------------------------------------------------- o Updated kbd (security/bugfix/feature) - Fix data/keymaps/i386/querty/br-abnt2.map (boo#984958, kbd-1.15.5-br-abnt2-slash-question.patch) ----------------------------------------------------------------------------- o Updated kdump (security/bugfix/feature) - kdump-include-hosts-and-nsswitch-in-kdumprd.patch: Refresh kdumprd if /etc/hosts or /etc/nsswitch.conf is changed (bsc#943214). - kdump-rebuild-initrd-service.patch: Add a separate systemd service to rebuild kdumprd at boot (bsc#943214). - kdump-net-0001-restore-bridge.patch: Restore bridge devices in kdump environment (bsc#980328). - kdump-net-0002-iface-kind.patch: Add initrd options according to interface kind (bsc#980328). - kdump-net-0003-handle-vlan.patch: Handle VLAN interfaces in initrd (bsc#980328). - kdump-net-0004-handle-iface-renames.patch: Handle interface changes for VLAN interfaces (bsc#980328). - kdump-net-0005-use-permanent-hwaddr.patch: Use the permanent hardware address for physical interfaces (bsc#980328). - kdump-net-0006-handle-bond.patch: Handle bonding interfaces in initrd (bsc#980328). - kdump-net-0007-query-correct-iface.patch: Query the correct interface in kdump_ip_config (bsc#980328). - kdump-net-0008-improve-auto-iface.patch: Use the correct method to get desired device mode for "auto" (bsc#980328). - kdump-net-0009-kind-from-wicked.patch: Get configured interface kind using wicked (bsc#980328). - kdump-net-0010-vlan-from-wicked.patch: Prefer wicked for VLAN configuration (bsc#980328). - kdump-net-0011-general-wicked-conf.patch: Generalize kdump_wicked_conf (bsc#980328). - kdump-net-0012-bridge-from-wicked.patch: Prefer wicked for bridge configuration (bsc#980328). - kdump-net-0013-bond-from-wicked.patch: Prefer wicked configuration for bonding interfaces (bsc#980328). - kdump-net-0014-global-kdump_iface.patch: Add global variable kdump_iface (bsc#980328). - kdump-net-0015-config-in-kdump_netif.patch: Store iface configuration in global variable kdump_netif (bsc#980328). - kdump-net-0016-config-in-check.patch: Determine network configuration in dracut's check() function (bsc#980328). - kdump-net-0017-kernel-mods-for-inactive.patch: Include required kernel modules for inactive interfaces (bsc#980328). - kdump-full-path-to-dracut.patch: Use full path to dracut as argument to bash (bsc#989972, bsc#990200, CVE-2016-5759). - kdump-use-last-entry-get-mountpoints.patch: Use the last mount entry in kdump_get_mountpoints() (bsc#951844). - kdump-kernel-cmdline-filter-notsc.patch: Remove 'notsc' from the kdump kernel command line (bsc#973213). - kdump-ListDirFilter-pass-DIR.patch: Pass dirfd to ListDirFilter::test() (bsc#964206). - kdump-DT_UNKNOWN-fallback-to-stat.patch: Fall back to stat() if file type is DT_UNKNOWN (bsc#964206). - Update kdump-keep-dracut-fstab-generator.patch references (add bsc#948913). - kdump-remove-vm-sysctl.patch: Remove vm. sysctls from kdump initrd (bsc#927451, bsc#987862). ----------------------------------------------------------------------------- o Updated kernel-source (security/bugfix/feature) - iommu/vt-d: Split up get_domain_for_dev function (bsc#994941). - iommu/vt-d: Make sure RMRRs are mapped before domain goes public (bsc#994941). - commit f3f95d2 - Delete patches.fixes/x86-allow_kernel_map_pages_in_pgd_to_work_when_nx_is_disabled.patch. - Delete patches.fixes/x86-configure_nx_support_earlier_in_setup_arch.patch. These two came from bsc#884369. Here's the deal: they were supposed to honor the situation where eXecuteDisable was cleared in the BIOS, i.e., no NX support. But this is not required and even plain wrong on Linux. So it was fixed differently upstream: 04633df0c43d ("x86/cpu: Call verify_cpu() after having entered long mode too") which we already have in 12SP2 and this makes those patches a NOP. So remove them. - commit af9594c - do "fold checks into iterate_and_advance()" right (bsc#972460). - fold checks into iterate_and_advance() (bsc#972460). - commit 6d349bd - kABI workaround for ppc KVM VTB fix (bsc#981367). - commit 0a5f717 - KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread (bsc#981367). - commit 825f70b - printk: Fix possible printk recursion during suspend (bsc#995541). - printk: Make printing kthread use default priority (bnc#744692, bnc#789311). - commit 1a1ea62 - Refresh patches.kabi/kabi-Keep-kvm-kabi-stable-across-kvm-arm-vtimer-enab.patch. - commit acb62c8 - scsi: introduce a quirk for false cache reporting (bsc#979231). - commit 73fffea - kabi: Keep kvm kabi stable across kvm arm vtimer enablement (bsc#999212). - commit 94f61cb - Update tags: patches.fixes/block-Convert-fifo_time-from-ulong-to-u64.patch. patches.fixes/cfq-iosched-Charge-at-least-1-jiffie-instead-of-1-ns.patch. patches.fixes/cfq-iosched-Convert-from-jiffies-to-nanoseconds.patch. patches.fixes/cfq-iosched-Convert-slice_resid-from-u64-to-s64.patch. patches.fixes/cfq-iosched-Convert-to-use-highres-timers.patch. patches.fixes/cfq-iosched-Expose-microsecond-interfaces.patch. patches.fixes/cfq-iosched-Fix-regression-in-bonnie-rewrite-perform.patch. - commit b8d6a56 - KVM: arm/arm64: Route vtimer events to user space (bsc#999212). - arm/arm64: KVM: Detect vGIC presence at runtime (bsc#999212). - commit 4c8cc2d - hpilo: Add support for iLO5 (bsc#999101). - commit 896ee75 - s390/pci: remove iomap sanity checks (bnc#998608, LTC#146199). - commit 32dabf3 - supported.conf: Add nfs modules to -base (bsc#990461) - commit ddfebc2 - Revert "rpm/config.sh: Build the KOTD against Leap 42.2" The openSUSE:Leap:42.2 project does not support the same set of architectures. Fix the build issue in the KOTD project instead. - commit 6eb1797 - HID: wacom: Support switching from vendor-defined device mode on G9 and G11 (bsc#981717). - HID: wacom: Initialize hid_data.inputmode to -1 (bsc#981717). - HID: wacom: break out parsing of device and registering of input (bsc#981717). - commit 28e2f16 - powerpc: add kernel parameter iommu_alloc_quiet (bsc#998825). - commit cf4ec19 - block: merge: get the 1st and last bvec via helpers (bsc#998863). - commit ece69c3 - Linux 4.4.21 ((bnc#981795) CVE-2016-0758 CVE-2016-3135 CVE-2016-5244 FATE#318001 FATE#318444 FATE#319466 FATE#319483 FATE#319648 FATE#319812 FATE#319813 FATE#319814 FATE#319815 FATE#319816 FATE#319817 FATE#319819 FATE#319922 FATE#319965 FATE#319980 FATE#320135 FATE#320138 FATE#320146 FATE#320191 FATE#320225 FATE#320226 FATE#320634 LTC#139401 bnc#943529 bnc#949504 bnc#963619 bnc#980892 boo#955096 boo#967938 bsc#951199 bsc#959364 bsc#963619 bsc#964944 bsc#966170 bsc#966172 bsc#966272 bsc#966277 bsc#966328 bsc#969468 bsc#969470 bsc#969471 bsc#969473 bsc#969474 bsc#969475 bsc#969476 bsc#969477 bsc#969479 bsc#970904 bsc#976560 bsc#979867 bsc#980657 bsc#983213 bsc#986925 bsc#987542 bsc#991038 bsc#991173 bsc#996790 fate#319505 fate#319484 bsc#974622 bsc#991671). - kABI: protect struct hw_perf_event. - kABI: protect struct sdhci_host. - Refresh patches.arch/arm64-0005-arm64-Add-workaround-for-Cavium-erratum-26026.patch. - Refresh patches.drivers/0013-block-remove-req_no_timeout-flag.patch. - Refresh patches.drivers/cxlflash-Removed-driver-date-print.patch. - Refresh patches.drivers/drm-i915-skl-Add-SKL-GT4-PCI-IDs. - Refresh patches.drivers/i40e-0030-i40evf-allocate-ring-structs-dynamically.patch. - Refresh patches.drivers/i40e-0041-i40e-propagate-properly.patch. - Refresh patches.fixes/0004-fork-free-thread-in-copy_process-on-failure.patch. - Delete patches.arch/arm64-1-2-net-thunderx-Fix-link-status-reporting.patch. - Delete patches.arch/arm64-Add-workaround-for-Cavium-erratum-27456.patch. - Delete patches.arch/arm64-KVM-Add-support-for-48bit-PA-in-EL2.patch. - Delete patches.arch/arm64-clk-xgene-Fix-divider-with-non-zero-shift-value.patch. - Delete patches.arch/arm64-irqchip-gic-v3-Make-sure-read-from-ICC_IAR1_EL1-is-v.patch. - Delete patches.arch/arm64-net-thunderx-Fix-for-Qset-error-due-to-CQ-full.patch. - Delete patches.arch/arm64-net-thunderx-Fix-for-multiqset-not-configured-upon-i.patch. - Delete patches.arch/arm64-net-thunderx-Fix-receive-packet-stats.patch. - Delete patches.arch/arm64-thd-irqchip-gicv3-its-numa-workaround-for-cavium-thunderx-erratum-23144.patch. - Delete patches.arch/cxl-Enable-PCI-device-ID-for-future-IBM-CXL-adapter.patch. - Delete patches.arch/cxl-Fix-DSI-misses-when-the-context-owning-task-exit.patch. - Delete patches.arch/cxl-Fix-possible-idr-warning-when-contexts-are-relea.patch. - Delete patches.arch/cxl-fix-build-for-GCC-4.6.x.patch. - Delete patches.arch/s390-sclp_ctl-fix-potential-information-leak-with-de.patch. - Delete patches.arch/s390-sles12sp2-01-03-pci_dma-fix-DMA-table-corruption-with-4-TB-main.patch. - Delete patches.drivers/0001-lightnvm-fix-bio-submission-issue.patch. - Delete patches.drivers/0002-lightnvm-fix-incorrect-nr_free_blocks-stat.patch. - Delete patches.drivers/0003-lightnvm-add-check-after-mempool-allocation.patch. - Delete patches.drivers/0004-lightnvm-unlock-rq-and-free-ppa_list-on-submission-f.patch. - Delete patches.drivers/0011-lightnvm-fix-locking-and-mempool-in-rrpc_lun_gc.patch. - Delete patches.drivers/0018-lightnvm-fix-missing-grown-bad-block-type.patch. - Delete patches.drivers/0026-blk-mq-end-unstarted-requests-on-dying-queue.patch. - Delete patches.drivers/0031-qla2xxx-Use-ATIO-type-to-send-correct-tmr-response.patch. - Delete patches.drivers/ALSA-hda-add-codec-support-for-Kabylake-display-audi. - Delete patches.drivers/crypto-nx842-Mask_XERS0_bit_in_return_value.patch. - Delete patches.drivers/cxlflash-01-Fix-to-avoid-unnecessary-scan-with-internal-LUNs. - Delete patches.drivers/cxlflash-04-Move-to-exponential-back-off-when-cmd_room-is-not-available. - Delete patches.drivers/cxlflash-05-Fix-to-resolve-dead-lock-during-EEH-recovery. - Delete patches.drivers/cxlflash-Enable-device-id-for-future-IBM-CXL-adapter.patch. - Delete patches.drivers/cxlflash-Fix-to-avoid-virtual-LUN-failover-failure.patch. - Delete patches.drivers/cxlflash-Fix-to-escalate-LINK_RESET-also-on-port-1.patch. - Delete patches.drivers/cxlflash-Fix-to-resolve-cmd-leak-after-host-reset.patch. - Delete patches.drivers/cxlflash-Resolve-oops-in-wait_port_offline.patch. - Delete patches.drivers/cxlflash-a-couple-off-by-one-bugs.patch. - Delete patches.drivers/drm-atomic-Do-not-unset-crtc-when-an-encoder-is-stol. - Delete patches.drivers/drm-radeon-fix-dp-link-rate-selection-v2. - Delete patches.drivers/e1000-0002-e1000-fix-data-race-between-tx_ring-next_to_clean.patch. - Delete patches.drivers/e1000e-0002-e1000e-fix-division-by-zero-on-jumbo-MTUs.patch. - Delete patches.drivers/fm10k-0001-fm10k-do-not-assume-VF-always-has-1-queue.patch. - Delete patches.drivers/fm10k-0002-fm10k-Correct-MTU-for-jumbo-frames.patch. - Delete patches.drivers/fm10k-0003-fm10k-Fix-handling-of-NAPI-budget-when-multiple-queu.patch. - Delete patches.drivers/fm10k-0006-fm10k-reset-max_queues-on-init_hw_vf-failure.patch. - Delete patches.drivers/fm10k-0007-fm10k-always-check-init_hw-for-errors.patch. - Delete patches.drivers/fm10k-0008-fm10k-reinitialize-queuing-scheme-after-calling-init.patch. - Delete patches.drivers/fm10k-0027-fm10k-Cleanup-MSI-X-interrupts-in-case-of-failure.patch. - Delete patches.drivers/fm10k-0028-fm10k-Cleanup-exception-handling-for-mailbox-interru.patch. - Delete patches.drivers/i40e-0007-i40e-Workaround-fix-for-mss-256-issue.patch. - Delete patches.drivers/i40e-0012-i40evf-handle-many-MAC-filters-correctly.patch. - Delete patches.drivers/i40e-0019-i40e-i40evf-Fix-RS-bit-update-in-Tx-path-and-disable.patch. - Delete patches.drivers/i40e-0032-i40e-fix-do-not-sleep-in-netdev_ops.patch. - Delete patches.drivers/i40e-0039-i40e-Fix-memory-leaks-sideband-filter-programming.patch. - Delete patches.drivers/i40e-0052-i40e-properly-delete-VF-MAC-filters.patch. - Delete patches.drivers/i40e-0053-i40e-don-t-add-zero-MAC-filter.patch. - Delete patches.drivers/i40e-0054-i40evf-check-rings-before-freeing-resources.patch. - Delete patches.drivers/i40e-0059-i40e-clean-whole-mac-filter-list.patch. - Delete patches.drivers/i40e-0068-i40e-Fix-Rx-hash-reported-to-the-stack-by-our-driver.patch. - Delete patches.drivers/i40e-0073-i40e-i40evf-Fix-RSS-rx-flow-hash-configuration-throu.patch. - Delete patches.drivers/igb-0002-igb-don-t-unmap-NULL-hw_addr.patch. - Delete patches.drivers/igb-0003-igb-use-the-correct-i210-register-for-EEMNGCTL.patch. - Delete patches.drivers/igb-0004-igb-fix-NULL-derefs-due-to-skipped-SR-IOV-enabling.patch. - Delete patches.drivers/intel_idle_knights_landing.patch. - Delete patches.drivers/ixgbe-0004-ixgbe-Fix-handling-of-NAPI-budget-when-multiple-queu.patch. - Delete patches.drivers/lpfc-Fix-DMA-faults-observed-upon-plugging-loopback-.patch. - Delete patches.drivers/lpfc-Fix-FCF-Infinite-loop-in-lpfc_sli4_fcf_rr_next_.patch. - Delete patches.drivers/lpfc-Fix-RDP-Speed-reporting.patch. - Delete patches.drivers/lpfc-Fix-RegLogin-failed-error-seen-on-Lancer-FC-dur.patch. - Delete patches.drivers/lpfc-Fix-crash-in-fcp-command-completion-path.patch. - Delete patches.drivers/lpfc-Fix-driver-crash-when-module-parameter-lpfc_fcp.patch. - Delete patches.drivers/lpfc-Fix-external-loopback-failure.patch. - Delete patches.drivers/lpfc-Fix-mbox-reuse-in-PLOGI-completion.patch. - Delete patches.drivers/lpfc-Fix-the-FLOGI-discovery-logic-to-comply-with-T1.patch. - Delete patches.drivers/megaraid_sas-Add-an-i-o-barrier.patch. - Delete patches.drivers/megaraid_sas-Do-not-allow-PCI-access-during-OCR.patch. - Delete patches.drivers/megaraid_sas-Fix-SMAP-issue.patch. - Delete patches.drivers/mlx5-0146-net-mlx5e-Don-t-try-to-modify-CQ-moderation-if-it-is.patch. - Delete patches.drivers/mlx5-0147-net-mlx5e-Don-t-modify-CQ-before-it-was-created.patch. - Delete patches.drivers/mpt3sas-A-correction-in-unmap_resources.patch. - Delete patches.drivers/mpt3sas-Fix-for-Asynchronous-completion-of-timedout-.patch. - Delete patches.fixes/0001-KEYS-Fix-ASN.1-indefinite-length-object-parsing.patch. - Delete patches.fixes/IB-IPoIB-Do-not-set-skb-truesize-since-using-one-lin.patch. - Delete patches.fixes/crypto-vmx-IV-size-failing-on-skcipher-API. - Delete patches.fixes/ext4-Avoid-deadlock-when-expanding-inode-size.patch. - Delete patches.fixes/ext4-Fix-xattr-shifting-when-expanding-inodes-2.patch. - Delete patches.fixes/ext4-Fix-xattr-shifting-when-expanding-inodes.patch. - Delete patches.fixes/ext4-Properly-align-shifted-xattrs-when-expanding-in.patch. - Delete patches.fixes/netfilter-x_tables-check-for-size-overflow.patch. - Delete patches.fixes/powerpc-tm-Avoid-SLB-faults-in-treclaim-trecheckpoint-when-RI=0. - Delete patches.fixes/rds-fix-an-infoleak-in-rds_inc_info_copy.patch. - Delete patches.fixes/udp-properly-support-MSG_PEEK-with-truncated-buffers.patch. - Delete patches.suse/msft-hv-0934-Drivers-hv-util-Increase-the-timeout-for-util-servic.patch. - Delete patches.suse/msft-hv-0935-Drivers-hv-utils-run-polling-callback-always-in-inte.patch. - Delete patches.suse/msft-hv-0936-tools-hv-report-ENOSPC-errors-in-hv_fcopy_daemon.patch. - Delete patches.suse/msft-hv-0938-Drivers-hv-util-catch-allocation-errors.patch. - Delete patches.suse/msft-hv-0940-drivers-hv-cleanup-synic-msrs-if-vmbus-connect-faile.patch. - Delete patches.suse/msft-hv-0944-Drivers-hv-vss-run-only-on-supported-host-versions.patch. - Delete patches.suse/msft-hv-0949-Drivers-hv-vmbus-serialize-process_chn_event-and-vmb.patch. - Delete patches.suse/msft-hv-0951-Drivers-hv-vmbus-fix-rescind-offer-handling-for-devi.patch. - Delete patches.suse/msft-hv-0990-Drivers-hv-vmbus-avoid-infinite-loop-in-init_vp_inde.patch. - Delete patches.suse/msft-hv-0991-Drivers-hv-vmbus-avoid-scheduling-in-interrupt-conte.patch. - Delete patches.suse/msft-hv-0992-Drivers-hv-vmbus-don-t-manipulate-with-clocksources-.patch. - Delete patches.suse/msft-hv-1022-x86-hyperv-Avoid-reporting-bogus-NMI-status-for-Gen2.patch. - Delete patches.suse/msft-hv-1032-drivers-hv-Lock-access-to-hyperv_mmio-resource-tree.patch. - Delete patches.suse/sched-numa-Fix-use-after-free-bug-in-the-task_numa_compare.patch. - commit ec0ea20 - rpm/config.sh: Build the KOTD against Leap 42.2 SLE12 SP2 is not available in the OBS yet. - commit 2c9729c - IB/mlx5: Enable MAD_IFC commands for IB ports only (bsc#996027). - commit 38fab1a - Revert: 63a72284 powerpc/pci: Assign fixed PHB number based on device-tree properties Disable patch added in 9f32a4f0 This patch is generally a good thing but can cause Ethernet device order to change when applied. Changing device order is not accetable for SP upgrade. (bsc#998394) - commit 1a19d36 - Drivers: hv: utils: Support TimeSync version 4.0 protocol samples (fate#320485, bnc#998667). - Drivers: hv: utils: Use TimeSync samples to adjust the clock after boot (fate#320485, bnc#998667). - Drivers: hv: utils: Rename version definitions to reflect protocol version (fate#320485, bnc#998667). - commit b99e9be - pci-hyperv: properly handle device eject (fate#320295, bnc#998664). - pci-hyperv: properly handle pci bus remove (fate#320295, bnc#998664). - commit 21baa93 - Btrfs: fix unexpected balance crash due to BUG_ON (bsc#998655). - commit f02e812 - libfc: Fix PRLI response handling yet again (bsc#998385). - Delete patches.fixes/fc_rport-update-fcp_parm-after-calling-prli-provider.patch. - commit a8e820d - rpm/kernel-binary.spec.in: Obsolete xf86-input-vmmouse from SP0/SP1 (bsc#998621) - commit 79dc53c - squashfs3: properly handle dir_emit() failures (bsc#998795). - commit 677f2f1 - Refresh patches.drivers/net-mlx4_en-Avoid-unregister_netdev-at-shutdown-flow.patch. (bsc#998398 bsc#998010) - commit 7e3564b - Disable patches.suse/btrfs-relocation-Fix-leaking-qgroups-numbers-on-data-extents.patch temporarily (bsc#997654) - commit 3db4873 - i40e: don't configure zero-size RSS table (bsc#998216). - i40e: use configured RSS key and lookup table in i40e_vsi_config_rss (bsc#998216). - i40e: move i40e_vsi_config_rss below i40e_get_rss_aq (bsc#998216). - commit 5c5194e - dax: fix mapping size check (bsc#998395). - commit d9057c2 - fc_rport: update fcp_parm after calling prli provider (bsc#998385). - libfc: Do not take rdata->rp_mutex when processing a -FC_EX_CLOSED ELS response (bsc#962846). - genirq/msi: Fix broken debug output (bsc#998391). - commit 93e23d1 - Revert "arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO" to fix kABI breakage on aarch64. - commit 6689a29 - sched,numa,mm: revert to checking pmd/pte_write instead of VMA flags (Automatic NUMA Balancing (fate#315482)). - sched/numa: Spread memory according to CPU and memory use (Automatic NUMA Balancing (fate#315482)). - commit f807f57 - Delete patches.fixes/0001-md-lockless-I-O-submission-for-RAID1.patch. This patch turned out to cause a regression and lead to be stuck with RAID array (bsc#998106). - commit d2e08c5 - mpt3sas: Fix panic when aer correct error occurred (bsc#997708). - commit b4752b6 - Move sched-Further-improve-spurious-CPU_IDLE-active-migrations.patch to the -tuning section per Mel, after also adapting it to only affect the old HW for which it is a regression fix. - commit 5098beb - be2net: Add privilege level check for OPCODE_COMMON_GET_EXT_FAT_CAPABILITIES SLI cmd (bsc#963844 FATE#320192). - commit ec7b5af - Linux 4.4.20 (CVE-2016-6480 FATE#319502 FATE#319959 LTC#144640 bnc#975065 bnc#978907 bnc#991665 bnc#994430 bsc#991608 bsc#991665 bsc#992712 bsc#989953 bsc#964944 FATE#319965). - Revert "Input: i8042 - set up shared ps2_cmd_mutex for AUX ports". - Revert "Input: i8042 - break load dependency between atkbd/psmouse and i8042". - Refresh patches.drivers/0003-nvme-use-offset-instead-of-a-struct-for-registers.patch. - Refresh patches.drivers/0006-nvme-split-a-new-struct-nvme_ctrl-out-of-struct-nvme_dev.patch. - Refresh patches.drivers/0010-usb-core-lpm-add-sysfs-node-for-usb3-lpm-permit.patch. - Refresh patches.drivers/0014-nvme-move-block_device_operations-and-ns-ctrl-freeing-to-common-code.patch. - Refresh patches.drivers/0017-nvme-move-nvme_-enable-disable-shutdown-ctrl-to-common-code.patch. - Refresh patches.drivers/0021-nvme-move-chardev-and-sysfs-interface-to-common-code.patch. - Refresh patches.drivers/0022-usb-fix-regression-in-SuperSpeed-endpoint-descriptor.patch. - Refresh patches.drivers/0026-nvme-only-add-a-controller-to-dev_list-after-it-s-been-fully-initialized.patch. - Refresh patches.drivers/0027-nvme-protect-against-simultaneous-shutdown-invocations.patch. - Refresh patches.drivers/0033-nvme-merge-probe_work-and-reset_work.patch. - Refresh patches.drivers/0049-nvme-add-pci-error-handlers.patch. - Refresh patches.drivers/0051-nvme-move-nvme_freeze-unfreeze_queues-to-nvme-core.patch. - Refresh patches.drivers/0057-nvme-remove-queue-freezing-on-resets.patch. - Refresh patches.drivers/0059-nvme-shutdown-controller-only-for-power-off.patch. - Refresh patches.drivers/0094-nvme-fix-reset-remove-race.patch. - Refresh patches.drivers/0097-NVMe-Only-release-requested-regions.patch. - Delete patches.arch/0001-ACPI-SRAT-fix-SRAT-parsing-order-with-both-LAPIC-and.patch. - Delete patches.arch/s390-sles12sp2-06-02-dasd-fix-hanging-device-after-clear-subchannel.patch. - Delete patches.drivers/0001-USB-fix-typo-in-wMaxPacketSize-validation.patch. - Delete patches.drivers/0001-USB-validate-wMaxPacketValue-entries-in-endpoint-des.patch. - Delete patches.drivers/0014-usb-define-USB_SPEED_SUPER_PLUS-speed-for-SuperSpeed.patch. - Delete patches.drivers/0023-aacraid-check-size-values-after-double-fetch-from-user.patch. - Delete patches.drivers/0023-xhci-Make-sure-xhci-handles-USB_SPEED_SUPER_PLUS-dev.patch. - Delete patches.drivers/0067-nvme-don-t-unmap-controller-registers-on-reset.patch. - Delete patches.suse/btrfs-properly-track-when-rescan-worker-is-running.patch. - Delete patches.suse/btrfs-waiting-on-qgroup-rescan-should-not-always-be-.patch. - Delete patches.suse/sched-nohz-Fix-affine-unpinned-timers-mess.patch. - commit 6225d0c - powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb) (bsc#996086). - commit 4210c97 - rhashtable: fix a memory leak in alloc_bucket_locks() (bsc#997456). - commit a66f331 - rhashtable: fix shift by 64 when shrinking (bsc#997456). - rhashtable: avoid large lock-array allocations (bsc#997456). - commit 242243d - supported.conf: Add iscsi modules to -base (bsc#997299) - commit 2fbe760 - Refresh patches.suse/x86-mm-sched-make-lazy-TLB-mode-even-lazier-kabi.patch. - commit 5ee2c37 - qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode (bsc#994968). - commit 957120a - USB: fix typo in wMaxPacketSize validation (bsc#991665). - commit 20506ba - thermal: Add Raspberry Pi BCM2835 thermal driver (bsc#989511). - Update config files. - supported.conf: Add bcm2835_thermal and bcm2835_cpufreq (bsc#989511) - cpufreq: Add Broadcom BCM2835 CPU frequency control driver (bsc#989511). - bcm2835: Add Raspberry Pi thermal sensor to the device tree (bsc#989511). - commit 725b043 - bnx2x: don't reset chip on cleanup if PCI function is offline (bsc#997253). - commit b20cf24 - cxgb4/cxgb4vf: Fixes regression in perf when tx vlan offload is disabled (bsc#993256). - commit 81405db - cephfs: remove warning when ceph_releasepage() is called on dirty page (bsc#995153). - cephfs: ignore error from invalidate_inode_pages2_range() in direct write (bsc#995153). - commit 2365939 - mm: introduce arch_reserved_kernel_pages() (bnc#989618). - mm/memblock.c: expose total reserved memory (bnc#989618). - powerpc: implement arch_reserved_kernel_pages (bnc#989618). - Refresh patches.fixes/mm-page_alloc.c-calculate-available-memory-in-a-sepa. - Delete patches.fixes/fadump-register-the-memory-reserved-by-fadump.patch. - Delete patches.fixes/mm-page_alloc-replace-set_dma_reserve-to-set_memory_reserve.patch. - commit 2042cf0 - kaweth: fix oops upon failed memory allocation (bsc#993890). - kaweth: fix firmware download (bsc#993890). - commit 62c8757 - kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd (bnc#941420). - commit 5ed8e2d - Build vmx-crypto as a module and put it into -extra (fate#318016) - commit 0c1f039 - ALSA: hda - add codec support for Kabylake display audio codec (bsc#996790). - commit 086193a - perf/x86/intel: Change offcore response masks for Knights Landing (bsc#980660). - commit 34b7d66 - IB/core: Fix reading capability mask of the port info class (bsc#994770). - IB/core: sysfs.c: Fix PerfMgt ClassPortInfo handling (bsc#994770). - IB/sysfs: Fix sparse warning on attr_id (bsc#994770). - IB/core: Display extended counter set if available (bsc#994770). - IB/core: Specify attribute_id in port_table_attribute (bsc#994770). - IB/core: Create get_perf_mad function in sysfs.c (bsc#994770). - commit 3c0d48d - scsi: ibmvfc: add FC Class 3 Error Recovery support (bsc#984992). - scsi: ibmvfc: Set READ FCP_XFER_READY DISABLED bit in PRLI (bsc#984992). - commit 928be2e - Update kabi files: import RC2 kernel with a pv_mmu_ops update - commit ccf7e72 - kabi/severities: Clean up a few entries. Keep only kvm, s390 and kgr-related items for the beginning. - commit b5e81a4 - Refresh patches.suse/sched-core-Move-task_rq_lock-out-of-line.patch. Fix the patch to be applicable via series2git script. - commit f612b49 - x86,mm,sched: make lazy TLB mode even lazier -kabi (bnc#971975 VM performance -- TLB flush). - commit 95c2de7 - IB/core: Fix oops in ib_cache_gid_set_default_gid (bsc#996027). - commit adf2ba3 - posix_acl: Clear SGID bit when setting file permissions (bsc#995968, CVE-2016-7097). - commit 13d5925 - sched: Further improve spurious CPU_IDLE active migrations (bnc# 986383). - commit 256b469 - tags: update patches that have landed in the mainline repository - commit 7b64931 - raid10: increment write counter after bio is split (bsc#992782). - commit f169ca3 ----------------------------------------------------------------------------- o Updated kiwi (security/bugfix/feature) - v7.03.94 released - Follow up fix for setupNetworkWicked IP address information from wicked is imported twice. However the plain IPv4 address validation happened only on the first import. Fixes bnc#992989 - Fixed message typo (bnc#996255) ----------------------------------------------------------------------------- o Updated libbluray (security/bugfix/feature) - Add libbluray-stop-showing-error-log.patch bnc#981767 -- Don't show some harmless log to stderr ----------------------------------------------------------------------------- o Updated libcanberra (security/bugfix/feature) - Split out a new sub-package canberra-gtk-play-gnome: Currently there are no desktop-login, desktop-logout or session-ready sounds in the freedesktop sound theme, so installing this will require a different sound-theme for it to be operational. Having this in a own sub-package will avoid logspam about missing files. Fixes boo#953862. ----------------------------------------------------------------------------- o Updated libcroco (security/bugfix/feature) - Update to version 0.6.11: + Fix regression in cr_tknzr_consume_chars. + Misc bug fixes. - Update to version 0.6.10: + Misc bug fixes. - Update to version 0.6.9: + Added Visual Studio projects. + Lots of warnings fixed. + Improve build system. + Misc bug fixes. ----------------------------------------------------------------------------- o Updated libgda (security/bugfix/feature) - Drop pkgconfig(fbembed) BuildRequires: pkgconfig(fbclient) is sufficient (and fbembed no longer exists). - Re-enable firebird for s390/s390x. - change getspARCH to ppc64 on ppc64le (Introduced with IcedTea 2.5) + This is a major re-write of the core parts of Libgda, and is API incompatible with the 3.x versions. Changes include: - Easier to understand and to use API, with less strange path usage - Reduce the size of the library (almost half the size, half the symbols) - Easier connection opening (removal of the GdaClient object) - Merge of the GdaQuery and GdaCommand into only one object to represent statements - New adaptative SQL parser (can be adaptated to each DBMS's SQL syntax) - New database based dictionary which can handle namespaces - Rework of the database adaptators (providers) for easier maintenance and more features - Sample "skeleton" database adaptators to make it easy to write a database adaptator for a new database type + Preliminary MacOS X support, and better support for cross compilation + New JDBC provider (allows access to any database through a JDBC driver) NOTE: This is currently not built. - remove "la" files, baby step to clean up all references to libavahi-*.la ----------------------------------------------------------------------------- o Updated libgnomecanvas (security/bugfix/feature) - Do parallel build with %_smp_mflags. - Remove old specfile section (%clean). - Remove fdupes call and related fdupes BuildRequires: it is currently not deduplicating anything. ----------------------------------------------------------------------------- o Updated libgnomeprint (security/bugfix/feature) - Add libgnomeprint-bison-3.0.patch: Fix build with Bison 3.0. ----------------------------------------------------------------------------- o Updated libgnomeprintui (security/bugfix/feature) - Drop gnome-icon-theme-devel BuildRequires: not required. - Add libgnomeprintui-no-g-i_t.patch: Do not check for the presence of gnome-icon-theme during build. ----------------------------------------------------------------------------- o Updated libgnomesu (security/bugfix/feature) ----------------------------------------------------------------------------- o Updated libgsf (security/bugfix/feature) - Updated to version 1.14.40: + Avoid gnome-common dependency. - Conditionally apply translations-update-upstream BuildRequires and macro for non-openSUSE only. ----------------------------------------------------------------------------- o Updated libguestfs (security/bugfix/feature) - Add mount.ntfs alternatives symlink for SLES too (fate#316274) - Remove obsolete kernel checks from specfile (fate#316274) - Remove kernel-default and mkinitrd from BuildRequires (fate#316274) - Clean up dependencies and add recommends for optional packages like the ones enabling file system features fate#316274, bsc#993501 ----------------------------------------------------------------------------- o Updated libgweather (security/bugfix/feature) - Update to version 3.20.3: + NOAA shut down their METAR provider service, so libgweather switched to a different provider (bgo#770321). + Updates translations. - Drop libgweather-change-service-provider.patch: Fixed upstream. - Add libgweather-change-service-provider.patch: The existing weather service provider was expired, replace by a working provider instead; patch taken from upstream bug report (bgo#770321). - Spellfix in find_lang macro. - Drop obsolete clean section. - Update to version 3.20.2: + Fixed NOAA API URL (bgo#765322). + Updated translations. ----------------------------------------------------------------------------- o Updated libical (security/bugfix/feature) - Drop libical-sle12-abi.patch: use standard libical 1.0.1 ABI for SP2. - add reproducible-generator.patch from debian bug report to get reproducible builds (and predicatable API actually) - Update to version 1.0.1: - Add libical-sle12-abi.patch: use enum values used in prior SLE12 package, for ABI compatibility (bsc#954161). - Drop 941609-typo-fix_icaltime_days_in_year.patch: fixed upstream (bsc#941609). - Add 941609-typo-fix_icaltime_days_in_year.patch: Typo fix "icaltime_days_in_year". This bug doesn't affect any functionality of SLE-12, backport for code correctness and completeness (bsc#941609). - disable parallel build, too unreliable + Allow duration specifications containing week along with day and time. even though this is against the RFC, but apparently we generate such durations so we need to be able to read them back. + handle the case of the ATTACH type be explicitly set to URI + added a lock to avoid threading problems when icaltimezone_parse_zone_tab is called on multiple threads - Use proper RPM macros in the spec file, remove unnecessary options passed to the configure script. ----------------------------------------------------------------------------- o Updated liblouis (security/bugfix/feature) - Move %install_info_delete from postun to preun. - Drop makeinfo BuildRequires: it's quite a big dependency and the .info file is present in the tarball. - Install doc directly (make_install -C doc). ----------------------------------------------------------------------------- o Updated libproxy-plugins (security/bugfix/feature) - Add libproxy-gnome-waitpid.patch: GNOME3: Wait for pxgsettings to vanish while destroying the plugin (boo#967601). ----------------------------------------------------------------------------- o Updated libproxy (security/bugfix/feature) - Add libproxy-gnome-waitpid.patch: GNOME3: Wait for pxgsettings to vanish while destroying the plugin (boo#967601). ----------------------------------------------------------------------------- o Updated libqt5-qtquickcontrols (security/bugfix/feature) - Add 0001-Fix-crash-on-exit-when-using-default-property-aliase.patch to fix a crash on apps (like kscreenlocker) that use default property aliases with layouts (bnc#999376, qt#51927) ----------------------------------------------------------------------------- o Updated libqt5-qtwebengine (security/bugfix/feature) [x86_64] - Added 0001-Fix-use-after-free-on-Linux-at-shutdown.patch to fix a crash on exit of some applications because a libevent event was accessed after it was deleted (bsc#1000168). ----------------------------------------------------------------------------- o Updated libsecret (security/bugfix/feature) - Add openSUSE conditional macro and description tag for existing patches in specfile. ----------------------------------------------------------------------------- o Updated libspectre (security/bugfix/feature) - Add fix-bsc975503.diff to fix handling of PostScript files with embedded EPS files. The PS file then contains two "%%EOF" DSC comments and the first one stopped the parsing of the file as if the real EOF was reached (bsc#975503). ----------------------------------------------------------------------------- o Updated libstorage (security/bugfix/feature) - Don't suppress subvol commit actions after resize (bsc#1000165) - 2.26.9 - improved message for creating volumes with a filesystem but without a mountpoint (bsc#996208) - 2.26.8 - merged pull request to not set boot flag on DASDs (see bsc#935127) - 2.26.7 ----------------------------------------------------------------------------- o Updated libtcnative-1-0 (security/bugfix/feature) - Disable 512-bit export-grade cryptography to prevent Logjam vulnerability CVE-2015-4000 (bnc#938945) ----------------------------------------------------------------------------- o Updated libvirt (security/bugfix/feature) - libxl: support VIR_MIGRATE_PERSIST_DEST migration flag 1fc90ae9-libxl-mig-persist.patch bsc#996020 - Don't provide empty usb device list to libxl. xen-pvusb-hvm.patch bsc#998005 - cpu_x86: Fix host-model CPUs on hosts with CMT dbb14bb0-cmt-fix1.patch, 1ac897a1-cmt-fix2.patch, 58ba240d-cmt-fix3.patch, 300f668c-cmt-fix4.patch bsc#998389 - libxl: allow libxl to calculate shadow mem requirements c0960aab-libxl-shadow-mem.patch bsc#997278 - libxl: advertise support for migration V3 36f57ad-advertise-migv3.patch bsc#996020 - Replace pci-use-driver-override-sysfs.patch with upstream variant 70f83f9d-pci-driver-override.patch bsc#986718 - Updated patches with the version accepted upstream. bsc#989646 * libxl-usb-vendor.patch replaced by e01d300b-libxl-usb-vendor.patch * virHostdevFindUSBDevice-privsyms.patch replaced by ea46e00f-virHostdevFindUSBDevice-privsyms.patch - Add USB Controller support for libxl driver. bsc#989646 f820d5bf6-USB-port-path-as-an-array-of-integers.patch 82c142b3-introduce-virDomainUSBAddressSet.patch 6b3e4e2b-functions-usb-controllers-to-addr.patch 44304c6e-libxl-usb-controller-hotplug.patch 770bf992-libxl-usb-controller-creation.patch 9a361bbb-xenconfig-usb-controller-conversion.patch be146b34-extend-usb-controller-model.patch c6f0e177-qusb-qemu-check.patch f5359e55-libxl-autocreate-usb-controller.patch - Reintroduce mistakenly removed virt-create-rootfs. virt-create-rootfs.patch. bsc#995981 ----------------------------------------------------------------------------- o Updated libzypp (security/bugfix/feature) - RepoFileReader: fix parsing of multiline url entries (bsc#964932) - Allow repo type 'rpm' as alias for 'rpm-md' (fixes openSUSE/zypper#100) - version 16.2.4 (0) - xmlout::Node: Allow adding nore attributes while the start node is not closed (FATE#320699) - Fixes broken XML output introduced by an unwanted change in 16.2.2 (bsc#998344) - version 16.2.3 (0) - Report numeric curl error if code is unrecognized (bsc#992302) - multicurl: propagate proxy settings stored in repo url (bsc#933839) - version 16.2.2 (0) ----------------------------------------------------------------------------- o Updated lsof (security/bugfix/feature) - modify lsof_4.89-nfs_hanging.patch and add a check for HasNFS variable as HasNFS may already have been set to 2 in the readmnt() function [bsc#995061] ----------------------------------------------------------------------------- o Updated lvm2 (security/bugfix/feature) - Delete the patch since it is not neccessary for the bug fix and has the risk to cause regression bug for thin-merge.sh (bsc#984321) Delete: activate-Improve-snapshot-merge-initiation.patch (Improve snapshot merge initiation (bsc#970943)) ----------------------------------------------------------------------------- o Updated makedumpfile (security/bugfix/feature) - makedumpfile-open_dump_bitmap-non-cyclic.patch: open_dump_bitmap: open bitmap file in non-cyclic case (bsc#992885). - makedumpfile-call-open_dump_bitmap-after-initial.patch: move call to open_dump_bitmap() to after call to initial() (bsc#992885). - makedumpfile-simplify-close_dump_bitmap-logic.patch: close_dump_bitmap: simplify logic (bsc#992885). ----------------------------------------------------------------------------- o Updated mariadb (security/bugfix/feature) - update to Mariadb 10.0.26 GA * release notes: * https://kb.askmonty.org/en/mariadb-10026-release-notes * changelog: * https://kb.askmonty.org/en/mariadb-10026-changelog * fixed CVEs: CVE-2016-3477, CVE-2016-3521, CVE-2016-3615, CVE-2016-5440 * fixes bugs: [bsc#991616] - remove mariadb-10.0.22-mysql-test_main_bootstrap.patch that is no longer needed [bsc#984858] - refresh mariadb-10.0.15-fortify-and-O.patch - remove the leftovers of "openSUSE" string from specfile and my.cnf file [bsc#985217] - remove unnecessary conditionals from specfile - add '--ignore-db-dir=lost+found' option to mysql-systemd-helper in order not to misinterpret the lost+found directory as a database [bsc#986251] ----------------------------------------------------------------------------- o Updated multipath-tools (security/bugfix/feature) - libmultipath: Do not crash on empty features (bsc#994812) - multipathd: Set CLI timeout correctly (bsc#999061) - Moved multipath-tools repository to github.com:/openSUSE/multipath-tools.git - Fixup glitch from patch 'fixup check from udev rules' (bsc#986734) - Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch; integrated into git repository - libmultipath: fall back to search paths by devt (bsc#995645) ----------------------------------------------------------------------------- o Updated nautilus (security/bugfix/feature) - Update to version 3.20.3: + Support HDPI in desktop margins. + Fix opaque desktop background after changing themes. + Fix gnome-shell search not providing results or making the CPU at 100% even if closed. - Drop nautilus-desktop-canvas-view-scale-desktop-workarea.patch: fixed upstream. - Add nautilus-desktop-canvas-view-scale-desktop-workarea.patch: The problem is that in the function canvas_container_set_workarea the screen width and height are in "application pixels" while the workarea ones are in "device pixels" so when the scaling is > 1, the margins are not properly setted (bgo#769302). of the files. ----------------------------------------------------------------------------- o Updated nfs-utils (security/bugfix/feature) - nfs.service: don't fail if "mount" reports an error (bsc#997134) - 0001-Move-export_d_read-to-support-export-export.c.patch 0002-systemd-improve-ordering-between-nfs-server-and-vari.patch Add new systemd "generator" to create proper ordering between nfsd startup and mounting different filesystems. (bsc at 994468) - 0001-systemd-ensure-nfs-config-service-is-re-run-as-neede.patch Make sure nfs-config is run as required (bsc#990356) ----------------------------------------------------------------------------- o Updated nss-mdns (security/bugfix/feature) - Fix bashisms in nss-mdns-config. ----------------------------------------------------------------------------- o Updated openCryptoki (security/bugfix/feature) - Added ocki-3.5-fix-pkcscca-calls.patch (bsc#996887). ----------------------------------------------------------------------------- o Updated openssh (security/bugfix/feature) - FIPS compatibility (no selfchecks, only crypto restrictions) [openssh-7.2p2-fips.patch] - PRNG re-seeding [openssh-7.2p2-seed-prng.patch] - preliminary version of GSSAPI KEX [openssh-7.2p2-gssapi_key_exchange.patch] ----------------------------------------------------------------------------- o Updated openssl (security/bugfix/feature) - Fix a regression caused by openssl-CVE-2016-2182-2.patch (bsc#995959) * add openssl-CVE-2016-2182-3.patch ----------------------------------------------------------------------------- o Updated openvswitch-dpdk (security/bugfix/feature) [x86_64] - Add new DPDK_OPTIONS environment variable to hold the dpdk vswitchd options so that the systemd unit files can be used to launch an ovs-vswitcd DPDK capable instance instead of doing it manually. (bsc#987265) * 0001-ovs-ctl-Add-new-DPDK_OPTIONS-environment-variable.patch automatically based on %bcond_with* macros (bsc#989335). ----------------------------------------------------------------------------- o Updated openvswitch (security/bugfix/feature) - Add new DPDK_OPTIONS environment variable to hold the dpdk vswitchd options so that the systemd unit files can be used to launch an ovs-vswitcd DPDK capable instance instead of doing it manually. (bsc#987265) * 0001-ovs-ctl-Add-new-DPDK_OPTIONS-environment-variable.patch automatically based on %bcond_with* macros (bsc#989335). ----------------------------------------------------------------------------- o Updated orca (security/bugfix/feature) + Fixes to work with newer Firefox, etc (bnc#932719). - Update to version 3.10.3: + General: - Fix for bug 726395 - Sometimes flat review presents non-localized rolenames - Fix a mysterious Brltty crash triggered by Orca - Fix for bug 708664 - Selection and link indicators messing up braille - Fix the live region announcment review keybindings - Fix two hangs when accessing WebKitGtk content - Fix two hangs when accessing Gecko content - Fix bug in column header labels for the links list dialog - Restore the speech server before cleaning up unused servers in Preferences - Add a sanity check for broken value-interface implementations - Fix a possible traceback in eclipse script + New and updated translations: fr, hu, zh_CN ----------------------------------------------------------------------------- o Updated pangomm (security/bugfix/feature) - Update to version 2.40.1: + C++11: Make all operator bool()s explicit. + Build: Fix silent builds (bgo#768797). ----------------------------------------------------------------------------- o Updated perl-Text-Unidecode (security/bugfix/feature) - updated to 1.27 see /usr/share/doc/packages/perl-Text-Unidecode/ChangeLog ----------------------------------------------------------------------------- o Updated perl (security/bugfix/feature) - add missing lock prototype to the debugger [bnc#932894] new patch: perl-dblockproto.diff - remove base.pm changes from perl-nodotinc.diff - fix xsloader looking at a "(eval)" directory [bnc#988311] [CVE-2016-6185] new patch: perl-xsloadereval.diff - fix searching current directory for optional modules [bnc#987887] [CVE-2016-1238] new patch: perl-nodotinc.diff - fix "Insecure dependency in require" error in taint mode [bnc#984906] new patch: perl-recontextnocurpm.diff - fix regex engine hanging on bad utf8 [bnc976584] [CVE-2015-8853] new patch: perl-badutf8hang.diff - fix environment dup handling bug [bnc#967082] [CVE-2016-2381] new patch: perl-dupenv.diff - fix memory leak in 'use utf8' handling [bnc#928292] new patch: perl-utf8leak.diff ----------------------------------------------------------------------------- o Updated pixman (security/bugfix/feature) ----------------------------------------------------------------------------- o Updated polkit-default-privs (security/bugfix/feature) - another updated from Factory for SUSE Linux Enterprise 12 SP2. - cleanups as per discussion with Ludwig - adding rules for sysprof (bsc#996111) and networkmanager (bsc#996110) - adding ModemManager (bsc#976945) - added brltty (bsc#967436) ----------------------------------------------------------------------------- o Updated powerpc-utils (security/bugfix/feature) [ppc64le] - Include the following new patches (bsc#998330): powerpc-utils-fix_integer_to_float_cast.patch powerpc-utils-Include_GPL_header.patch powerpc-utils-lparstat_Fix_segfault_when_parsing_proc_interrupts.patch powerpc-utils-lparstat_Ignore_whitespace_at_beginning_of_proc_interrupts_SPU_line.patch ----------------------------------------------------------------------------- o Updated python-louis (security/bugfix/feature) - Move %install_info_delete from postun to preun. - Drop makeinfo BuildRequires: it's quite a big dependency and the .info file is present in the tarball. - Install doc directly (make_install -C doc). - Use %{?_smp_mflags} for parallel build, newer %make_install for installation, and remove redundant %clean section. - Move data from library package to separate subpackage, to ensure library package can be safely upgraded. - Update to version 2.6.4: + New features: YAML based harness tests. Harness tests can now + Bug fixes: + Other changes: + Braille table improvements: - Changes from version 2.6.3: + New features: + Bug fixes: Fixed a problem in resolveTable when using a Java + Other changes: The build dependency on makeinfo is now + Braille table improvements. + Corrections and improvements made to UEB tables. - Changes from version 2.6.2: + New features: Harness tests now can test for typeform + Bug fixes: Fix for emphasis bug. + Braille table improvements. - Changes from version 2.6.1: + New features: New Braille tables. + Braille table improvements. + Bug fixes: Fix a compiler warning in the logging code. + Documentation updates: The documentation has been restructured + Other changes: + Backwards incompatible changes: - Changes from version 2.6.0: + New features: + Bug fixes: + Braille table improvements. - Bump soname following upstream changes, leading to rename of package liblouis2 to liblouis9. - Update url and sourceurl to new working ones. - Add exlicit makeinfo BuildRequires, we want to build documentation. ----------------------------------------------------------------------------- o Updated python3-gobject (security/bugfix/feature) ----------------------------------------------------------------------------- o Updated python3-louis (security/bugfix/feature) - Move %install_info_delete from postun to preun. - Drop makeinfo BuildRequires: it's quite a big dependency and the .info file is present in the tarball. - Install doc directly (make_install -C doc). - Use %{?_smp_mflags} for parallel build, newer %make_install for installation, and remove redundant %clean section. - Move data from library package to separate subpackage, to ensure library package can be safely upgraded. - Update to version 2.6.4: + New features: YAML based harness tests. Harness tests can now + Bug fixes: + Other changes: + Braille table improvements: - Changes from version 2.6.3: + New features: + Bug fixes: Fixed a problem in resolveTable when using a Java + Other changes: The build dependency on makeinfo is now + Braille table improvements. + Corrections and improvements made to UEB tables. - Changes from version 2.6.2: + New features: Harness tests now can test for typeform + Bug fixes: Fix for emphasis bug. + Braille table improvements. - Changes from version 2.6.1: + New features: New Braille tables. + Braille table improvements. + Bug fixes: Fix a compiler warning in the logging code. + Documentation updates: The documentation has been restructured + Other changes: + Backwards incompatible changes: - Changes from version 2.6.0: + New features: + Bug fixes: + Braille table improvements. - Bump soname following upstream changes, leading to rename of package liblouis2 to liblouis9. - Update url and sourceurl to new working ones. - Add exlicit makeinfo BuildRequires, we want to build documentation. ----------------------------------------------------------------------------- o Updated qemu (security/bugfix/feature) - Allow kvm to run on the RPi3 (bsc#999212) 0071-ARM-KVM-Enable-in-kernel-timers-wit.patch - Address various security/stability issues * Fix potential DOS in virtio via infinite loop (CVE-2016-6490 bsc#991466) 0062-virtio-check-vring-descriptor-buffe.patch * Fix use-after-free issue in vmxnet3 (CVE-2016-6888 bsc#994771) 0063-net-vmxnet3-check-for-device_active.patch * Fix potential DOS in vmxnet (CVE-2016-6833 bsc#994774) 0064-net-vmxnet-use-g_new-for-pkt-initia.patch * Fix directory traversal flaw in 9p virtio backend (CVE-2016-7116 bsc#996441) 0065-9pfs-handle-walk-of-.-in-the-root-d.patch * Plug data leak in vmxnet3 emulation (CVE-2016-6836 bsc#994760) 0066-net-vmxnet-initialise-local-tx-desc.patch * Avoid OOB access or DOS in malicious use of Vmware pv scsi interface (CVE-2016-7155 bsc#997858) 0067-scsi-check-page-count-while-initial.patch * Avoid DOS potential in Vmware pv scsi interface (CVE-2016-7156 bsc#997859) 0068-scsi-pvscsi-avoid-infinite-loop-whi.patch * Fix OOB access in LSI SAS1068 emulation (CVE-2016-7157 bsc#997860) 0069-scsi-mptconfig-fix-format-string.patch * Fix incorrect assert in LSI SAS1068 emulation (CVE-2016-7157 bsc#997860) 0070-scsi-mptconfig-fix-an-assert-expres.patch - Patch queue updated from https://gitlab.suse.de/virtualization/qemu.git SLE12-SP2 - Patch queue updated from https://gitlab.suse.de/virtualization/qemu.git SLE12-SP2 - Xen HVM: unplug also SCSI disks (bnc#953518) * Patches added: 0061-xen_platform-unplug-also-SCSI-disks.patch ----------------------------------------------------------------------------- o Updated release-notes-sles (security/bugfix/feature) - 12.2.20160916 - Updated template text - Fixed section structure of InfraPackArch (bsc#997470) - Updated release notes from FATE - New entries: - FATE#316136: Nagios Server Now Part of a SUSE Manager Subscription - FATE#319143: Partial Memory Mirroring - FATE#319461: openldap2-ppolicy-check-password Has Been Added: OpenLDAP Password Strength Policy Enforcer - FATE#319716: Updating the Installer at the Beginning of the Installation or Upgrade - FATE#320122: Support for New Intel Processors - FATE#320407: Enrolling in a Microsoft Active Directory Domain via YaST - FATE#321157: SASL Integration in sudo - FATE#321358: Network Interfaces Configured via linuxrc Take Precendence - FATE#321367: Enable Boot Parameter quiet for Better Visibility of Password Prompts - Changed entries: - FATE#320305: Incompatible Changes in the New 4.4 Kernel [Added information about end_phys_index file.] - Removed entries: - FATE#320535: Virtual Machine Driver Pack 2.4 [Was in fact not yet ready.] - 12.2.20160829 (for 12 SP2 RC2) - Updated release notes from FATE - New entries: - FATE#321181: iSCSI Devices Not Enabled After Installation (bnc#993382) ----------------------------------------------------------------------------- o Updated sg3_utils (security/bugfix/feature) - using "--lun" now works correctly (bsc#981452), adding patch: * add-lunsearch-filter-to-searchexisting.patch ----------------------------------------------------------------------------- o Updated shadow (security/bugfix/feature) - boo#994486: Include shadow.5 manpage Previously this was provided by man-pages package in the man-pages-addons tarball which got removed later on. ----------------------------------------------------------------------------- o Updated shim (security/bugfix/feature) [x86_64] - shim-install : fix regression of password prompt (bsc#993764) ----------------------------------------------------------------------------- o Updated sles-manuals_en (security/bugfix/feature) - Update text and image files (git: 2674c68). (dummy bsc#933411). - Update text and image files (git: aad7d84). (dummy bsc#933411). - Update text and image files (git: c28108e). (dummy bsc#933411). ----------------------------------------------------------------------------- o Updated spice-gtk (security/bugfix/feature) - Move acl helper to a new libspice-client-glib-helper package and add a corresponding dependency (bsc#994858) ----------------------------------------------------------------------------- o Updated spice-vdagent (security/bugfix/feature) - Fix crash when changing guest display's resolution (bsc#997236) 8c465007-vdagentd-fixes-small-leak.patch f97751fa-revert-uinput-fix-small-leak-of-screen_info.patch ----------------------------------------------------------------------------- o Updated squid (security/bugfix/feature) - Update Squid to 3.5.21 (bnc#998595) * fix assertion failure in xcalloc when using many cache_dir Squid is documented as supporting up to 64 cache directories, but would crash with a memory allocation error if more than a few were actually configured. * fix authentication credentials IP TTL updated incorrectly This bug caused error in max_user_ip ACL accounting to allow clients to shift IP address more times than configured. Fix may have an effect on IPv6 clients using "proviacy adressing" to rotate IPs. * fix mal-formed Cache-Control:stale-if-error header This bug shows up as incorrect stale-if-error values being relayed by Squid breaking the use of this feature in the recipients. Squid now relays the header values correctly. * fix Proxy-Authenticate problem using ICAP server With this change Squid now treats the ICAP REQMOD adaptation point as a part of itself with regards to proxy authentication. The Proxy-Authentication header received from the client is delivered as part of the HTTP request headers in expectation that the ICAP service may authenticate and/or produce 407 response itself. * fix HTTP: MUST always revalidate Cache-Control:no-cache responses This bug shows up as Squid not revalidating some responses until they became stale according to refresh_pattern heuristic rules (specifically the minimum caching age). Squid now revalidates these objects on every request. * fix HTTP: do not allow Proxy-Connection to override Connection * fix SSL CN wildcard must only match a single domain fragment This bug shows up as incorrect matching (or non-matching) of the ss::server_name ACL against TLS certificate values. Squid now treats the certificate CN fields according to X.509 domain matching requirements instead of HTTP domain matching requirements. - squid-brokenad.patch * propertly capitalize option name * make the conditional if() not a riddle - squid-config.patch * refresh patch - squid-rpmlintrc * include commented out option from OpenSUSE to sync packages ----------------------------------------------------------------------------- o Updated sysconfig (security/bugfix/feature) - version 0.84.0 - netconfig: intoduced a batch mode (bsc#989741) It permits to preform multiple modify/remove operations and call the effective update at the end of the batch. - netconfig: use ntpq, as ntpdc is deprecated (bsc#894889), lower sleep lock wait granularity and fix NTP_KEYS parsing - Drop the omc svcinfo data as they are not used anymore - Run spec-cleaner to remove few obsolete things - Drop cvs helper files as we are in git - Rename configure.in to configure.ac ----------------------------------------------------------------------------- o Updated systemd (security/bugfix/feature) - Update SLE12-SP2 branch: Added: 0804f77 kbd-model-map: add more mappings offered by Yast (bsc#897803 bsc#996870) 31ae8c8 rules: block: add support for pmem devices (#3683) (bsc#988119) - Build require python and python-lxml in order to generate systemd.directives man page (bsc#986952) - Fix is-enabled in systemd-sysv-install (bsc#997268) - Don't build gnu-efi support for mini package ----------------------------------------------------------------------------- o Updated systemtap (security/bugfix/feature) - Blacklist powerpc:hash_fault tracepoint (bsc#982029) New patch: systemtap-blacklist-powerpc-hash_fault-tracepoint.patch ----------------------------------------------------------------------------- o Updated tiff (security/bugfix/feature) - Added patches: * tiff-4.0.6-libtiff-tif_luv.c-validate-that-for-COMPRESSION_SGIL.patch * tiff-4.0.6-libtiff-tif_pixarlog.c-fix-potential-buffer-write-ov.patch * tiff-4.0.6-libtiff-tif_read.c-make-TIFFReadEncodedStrip-and.patch - Upstream commits to fix CVE-2016-5314 [bsc#984831], CVE-2016-5316 [bsc#984837], CVE-2016-5317 [bsc#984842], CVE-2016-5320 [bsc#984808] and CVE-2016-5875 [bsc#987351] - Added patch: * tiff-4.0.6-CVE-2016-3186.patch - fix CVE-2016-3186: buffer overflow in gif2tiff [bsc#973340] - Added patch: * tiff-4.0.6-CVE-2015-8782.patch - fix CVE-2015-8781, CVE-2015-8782, CVE-2015-8783: Out-of-bounds writes for invalid images (upstream bug #2522) [bsc#964225] ----------------------------------------------------------------------------- o Updated tomcat (security/bugfix/feature) - Backport fix for inifinite loop in the jar scanner for 8.0.36. (bnc#993862) Added: tomcat-8.0.36-jar-scanner-loop.patch ----------------------------------------------------------------------------- o Updated tuned (security/bugfix/feature) - Update tuned-2.4.0-use_cpupower_for_intel_perf_bias.patch (bsc#989329) fixed syntax error which is triggered by tuned-gui. Probably existed for a longer time. - Update to version 2.4.1 (bsc#989329) + fixed traceback if profile cannot be loaded (rhbz#953128) + powertop2tuned: fixed traceback if rewriting file instead of dir (rhbz#963441) + throughput-performance: altered dirty ratios for better performance (rhbz#1043533) + latency-performance: leaving THP on its default (rhbz#1064510) + used throughput-performance profile on server by default (rhbz#1063481) + network-latency: added new profile (rhbz#1052418) + network-throughput: added new profile (rhbz#1052421) + recommend.conf: fixed config file (rhbz#1069123) + systemd: added cpupower.service conflict (rhbz#1073392) + balanced: used medium_power ALPM policy + added support for >, < assignment modifiers in tuned.conf + handled root block devices + balanced: used conservative CPU governor (rhbz#1124125) + plugins: added selinux plugin + plugin_net: added nf_conntrack_hashsize parameter + profiles: added atomic-host profile (rhbz#1091977) + profiles: added atomic-guest profile (rhbz#1091979) + moved profile autodetection from post install script to tuned daemon (rhbz#1144067) + man: structured profiles manual pages according to sub-packages + added missing hdparm dependency (rhbz#1144858) + improved error handling of switch_profile (rhbz#1068699) + tuned-adm: active: detect whether tuned deamon is running (rhbz#1068699) + removed active_profile from RPM verification (rhbz#1104126) + plugin_disk: readahead value can be now specified in sectors (rhbz#1127127) + plugins: added bootloader plugin (rhbz#1044111) + plugin_disk: added error counter to hdparm calls + plugins: added scheduler plugin (rhbz#1100826) + added tuned-gui + plugin_disk: set_spindown and set_APM made independent (rhbz#976725) + plugin_bootloader: added check for grub2 (rhbz#1150047) + tuned-adm: fixed traceback on "tuned-adm list" (rhbz#1149162) + plugin_bootloader: 00_tuned do not return error if there is no cmdline (rhbz#1151768, bsc#901180) + fixed polkit configuration + Added : tuned-2.4.0-use_cpupower_for_intel_perf_bias.patch - Update use_cpupower_for_intel_perf_bias to upstream changes + Deleted: se_cpupower_for_intel_perf_bias - Update fix_race.patch; to upstream change - Add tuned-gtk and profiles-atomic subpackages - Add hdparm and util-linux requirements; new dependencies - Add bash-completion build requirement to avoid owning standard directory - Add tuned-powertop2tuned-fix-KeyError-on-id-attribute.patch (bnc#888599) - Remove fix-new-systemd-tmpfiles.d-path.patch; fixed by upstream - Remove python-gobject dependency in -gtk subpackage; main package already requires python-gobject - Remove sap profiles - Fix network race in systemctl service file (bsc#977575) * Add tuned_fix_race.patch - Fix "no newline at end of file" in 2 patches: * Modified fix-allow-receive_sender-default.patch * Modified fix-new-systemd-tmpfiles.d-path.patch ----------------------------------------------------------------------------- o Updated u-boot (security/bugfix/feature) [aarch64] - Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed - Use OF_CONTROL so that no external device tree is needed (bsc#989513) * Patches added: 0020-bcm2835_gpio-add-device-tree-suppor.patch 0021-serial-bcm283x_mu-add-device-tree-s.patch 0022-serial-pl01x-expose-skip_init-platd.patch 0023-fdt-add-dt-bindings-for-bcm2835.patch 0024-fdt-import-bcm283x-device-tree-sour.patch 0025-serial-bcm283x_mu-support-disabling.patch 0026-board-rpi-move-uart-deactivation-to.patch 0027-ARM-bcm283x-use-OF_CONTROL-for-bcm2.patch 0028-Update-bcm283x-DT-to-kernel-source-.patch 0029-Use-upstream-bcm2835.dtsi-to-fix-rp.patch 0030-Adjust-bcm283x-DT-to-work-with-uboo.patch - Patch queue updated from git://github.com/openSUSE/u-boot.git tumbleweed * Patches added: 0019-common-env_nand-Ensure-that-we-have.patch - Add post-install script for Raspberry Pi to install to /boot/efi where needed. (bsc#996064) ----------------------------------------------------------------------------- o Updated virt-manager (security/bugfix/feature) - bsc#996020 - L3: Unable to migrate VMs between SLES12 SP1 XEN Hosts with virt-manager 0425975f-use-virDomainMigrate3-API.patch 561f5cd3-drop-xenmigr-scheme-from-Xen-migration-URI.patch - fate#319621 - KVM: Provide SMBIOS info to KVM virtual machines d8a0a788-xmlbuilder-01.patch 559e813b-xmlbuilder-02.patch a931a1a6-xmlbuilder-03.patch 835ddc5f-xmlbuilder-04.patch b08647c2-xmlbuilder-05.patch b31c0b44-Add-classes-for-defining-SMBios-information.patch a3206f89-Add-the-sysinfo-option.patch 63784f4d-document-new-sysinfo-option.patch ----------------------------------------------------------------------------- o Updated vte (security/bugfix/feature) - Add vte-widget_get_preferred_height.patch: widget_get_preferred_height: use vertical padding, not horizontal. Corresponding patches in gnome-terminal. Patch from upstream git (bgo#760944). ----------------------------------------------------------------------------- o Updated webkit2gtk3 (security/bugfix/feature) - Rebase webkitgtk-disable-gcc-version-checks.patch for 2.12.5 - Update to version 2.12.5: + Fix a regression introduced in 2.12.4 that caused a hang in the network process after a load failure. + Fix several crashes and rendering issues. ----------------------------------------------------------------------------- o Updated webkitgtk3 (security/bugfix/feature) - Disable GCC's delete-null-pointer-checks optimization to fix various runtime issues (e.g. boo#987596) ----------------------------------------------------------------------------- o Updated wget (security/bugfix/feature) - Fix for HTTP to a FTP redirection file name confusion vulnerability (bnc#984060, CVE-2016-4971, wget-CVE-2016-4971.patch). - Work around a libidn <= 1.30 vulnerability (bsc#937096, CVE-2015-2059, wget-CVE-2015-2059.patch). - Fix for wget fails with basicauth: Failed writing HTTP request: Bad file descriptor (bnc#958342, wget-basicauth.patch) ----------------------------------------------------------------------------- o Updated wpa_supplicant (security/bugfix/feature) - added patch for bnc#952254 CVE-2015-5310 0001-WNM-sleep-gtk-CVE-2015-5130.patch WNM: Ignore Key Data in WNM Sleep Mode Response frame if no PMF in use - added patch for bnc#937419 CVE-2015-8041 0001-NFC-Fix-payload-length-validation-in-NDEF-record-par.patch - added patch for bnc#930077 CVE-2015-4141 0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch - added patch for bnc#930078 CVE-2015-4142 0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch - added patches for bnc#930079 CVE-2015-4143 0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch 0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch 0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch 0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch ----------------------------------------------------------------------------- o Updated xen (security/bugfix/feature) [x86_64] - bsc#995785 - VUL-0: CVE-2016-7092: xen: x86: Disallow L3 recursive pagetable for 32-bit PV guests (XSA-185) 57d1563d-x86-32on64-don-t-allow-recursive-page-tables-from-L3.patch - bsc#995789 - VUL-0: CVE-2016-7093: xen: x86: Mishandling of instruction pointer truncation during emulation (XSA-186) 57d15679-x86-emulate-Correct-boundary-interactions-of-emulated-insns.patch 57d18642-hvm-fep-Allow-test-insns-crossing-1-0-boundary.patch - bsc#995792 - VUL-0: CVE-2016-7094: xen: x86 HVM: Overflow of sh_ctxt->seg_reg[] (XSA-187) 57d1569a-x86-shadow-Avoid-overflowing-sh_ctxt-seg_reg.patch 57d18642-x86-segment-Bounds-check-accesses-to-emulation-ctxt-seg_reg.patch - bsc#991934 - xen hypervisor crash in csched_acct 57c96df3-credit1-fix-a-race-when-picking-initial-pCPU.patch - Upstream patches from Jan 57c4412b-x86-HVM-add-guarding-logic-for-VMX-specific-code.patch 57c57f73-libxc-correct-max_pfn-calculation-for-saving-domain.patch 57c805bf-x86-levelling-restrict-non-architectural-OSXSAVE-handling.patch 57c805c1-x86-levelling-pass-vcpu-to-ctxt_switch_levelling.patch 57c805c3-x86-levelling-provide-architectural-OSXSAVE-handling.patch 57c82be2-x86-32on64-adjust-call-gate-emulation.patch 57c96e2c-x86-correct-PT_NOTE-file-position.patch 57cfed43-VMX-correct-feature-checks-for-MPX-and-XSAVES.patch - bsc#979002 - add 60-persistent-xvd.rules and helper script also to initrd, add the relevant dracut helper - bnc#953518 - unplug also SCSI disks in qemu-xen-traditional for upstream unplug protocol - bsc#989679 - [pvusb feature] USB device not found when 'virsh detach-device guest usb.xml' 57c93e52-fix-error-in-libxl_device_usbdev_list.patch ----------------------------------------------------------------------------- o Updated xerces-c (security/bugfix/feature) - Add patches for bnc#985860 CVE-2016-4463: * xerces-c-CVE-2016-4463-part1.patch * xerces-c-CVE-2016-4463-part2.patch - added xerces-c-CVE-2016-2099.patch Exception handling mistake causing use after free (bsc#979208, CVE-2016-2099) ----------------------------------------------------------------------------- o Updated xrdp (security/bugfix/feature) - Add xrdp-disable-8-bpp-vnc-support.patch: Disable 8 bpp vnc support. Xvnc drops support for 8 bpp since 1.4.0. Trying to launch Xvnc in 8 bpp will cause it to dump core (bsc#991059). ----------------------------------------------------------------------------- o Updated yast2-auth-client (security/bugfix/feature) - Fix an issue with UI layout after leaving a domain (bsc#997380). - Make DNS update optional for AD enrollment (bsc#991564). - Fix inaccurate description of ad_server parameter (bsc#996873). - Do not allow using hard bind policy in LDAP config (bsc#996538). Bump version to 3.3.11. ----------------------------------------------------------------------------- o Updated yast2-bootloader (security/bugfix/feature) - import properly device map in autoyast profile (found during debugging bnc#995627) - log device map entries before written them, to allow easier debugging of augeas lenses failure (bnc#995627) - 3.1.203 - fix crash when activating partition on md raid (bnc#995627) - 3.1.202 ----------------------------------------------------------------------------- o Updated yast2-installation (security/bugfix/feature) - Fixed crash if one defined proposal module has not been found on system while switching back from "Expert" proposal. (bnc#999953) - 3.1.216 - fix skipping of proposal returning empty hash otherwise it creates non sense proposal entry in UI (bnc#994127) - 3.1.215 - Display a warning popup when the installer self-update uses the fallback URL instead of the selected SMT or the default SCC server (bsc#996179) - Do not contact the registration server in self-update when network is not running, skip self-update completely - 3.1.214 ----------------------------------------------------------------------------- o Updated yast2-kdump (security/bugfix/feature) - AutoYaST: Write and sections correctly. Imported settings will not be overwritten by proposal. (bnc#995750) - 3.1.41 ----------------------------------------------------------------------------- o Updated yast2-network (security/bugfix/feature) - bnc#993587 - extended fix from 3.1.168 to cover also virtual interfaces - 3.1.170 - bnc#988157 - disable DHCP autoconfiguration in installer when an interface configuration is provided via linuxrc - 3.1.169 ----------------------------------------------------------------------------- o Updated yast2-packager (security/bugfix/feature) - Fix URLs handling when retrying to load an add-on from a CD/DVD through the add_on_products.xml (related to bsc#991935). - 3.1.117 ----------------------------------------------------------------------------- o Updated yast2-registration (security/bugfix/feature) - more robust check for installation dark theme (bnc#996258) - 3.1.188 ----------------------------------------------------------------------------- o Updated yast2-reipl (security/bugfix/feature) [s390x] - do not print shutdown message if chreipl succeed, as it do reboot (bnc#988379) - 3.1.12 ----------------------------------------------------------------------------- o Updated yast2-ruby-bindings (security/bugfix/feature) - Rescue "invalid byte sequence in UTF-8", with a custom message (bsc#992821). - 3.1.51 ----------------------------------------------------------------------------- o Updated yast2-security (security/bugfix/feature) - mark string "Security" translatable (bnc#988764) - 3.2.3 ----------------------------------------------------------------------------- o Updated yast2-slp (security/bugfix/feature) - Align left the labels in the SLP service popup, unify it with the other popup dialogs in YaST (bsc#996846) - 3.1.10 ----------------------------------------------------------------------------- o Updated yast2-storage (security/bugfix/feature) - Don't try to format a partition with file system type 'unknown' (bsc#996007) - 3.1.103 ----------------------------------------------------------------------------- o Updated yast2-trans (security/bugfix/feature) - Updated languages: ar cs da de el en_GB en_US es fi fr hu it ja ko nb nl pl pt pt_BR ru sv tr uk zh_CN zh_TW (dummy bsc#933411). - Updated languages: af am ar be bg bn bs ca cs cy da de el eo es et eu fa fi fr gl gu he hi hr hu id it ja jv ka km kn ko ku lo lt mk mr ms my nb nl nn pa pl pt ro ru si sk sl sr sv sw ta tg th tk tr uk vi wa xh zu en_GB en_US pt_BR zh_CN zh_TW ast nds (dummy bsc#933411). ----------------------------------------------------------------------------- o Updated yast2-users (security/bugfix/feature) - AutoYaST: Ignore Users without UID while checking for duplicate UIDs (bnc#996823) - 3.1.57 - AutoYaST: Checking users entries for duplicate username/UIDs. (bnc#995397) - 3.1.56 ----------------------------------------------------------------------------- o Updated yast2 (security/bugfix/feature) - Network: Fix bug introduced during NetworkInterfaces.Read cleanup The method Networkinterfaces.Locate now returns the interface name of the interfaces that match the given condition instead of the type. (bsc#998717) - 3.1.206 ----------------------------------------------------------------------------- o Updated zlib (security/bugfix/feature) - Trim descriptions to fit target audience. Update RPM group classification. - Require zlib-devel in zlib-devel-static to fix previous change - Bring back zlib-devel-static. Needed by binutils - Remove zlib-devel-static, nothing should use libz.a anyway. - Package minizip library, everything using it should now pull minizip-devel and unbundle it bnc#935864 ----------------------------------------------------------------------------- o Updated zypper-lifecycle-plugin (security/bugfix/feature) - version 0.4 - handle codestream info (fate#320835) - clarify help text (bnc#981106) ----------------------------------------------------------------------------- o Updated zypper-migration-plugin (security/bugfix/feature) - use the same snapper commandline as yast2 migration (bsc#984324) - version 0.10 ----------------------------------------------------------------------------- o Updated zypper (security/bugfix/feature) - products --xmlfwd: Literally forward the XML tags found in a product file (FATE#320699) - BuildRequires: libzypp-devel >= 16.2.3 - man: enhance install/uninstall section - version 1.13.10 - --no-recommends: don't make an attempt to show recommends/suggests as we know there are none (bsc#958161) - remove dead code - version 1.13.9 - locks: add parsable XML output (bsc#985390) - version 1.13.8 - fixup! info: fix --repo also listing all matching installed packages (bsc#981743). Muliple commandline arguments cause items to be listed nultiple times. - Prefer option --not-installed-only over the misleading --uninstalled-only (bsc#972997) - version 1.13.7 - info: fix --repo also listing all matching installed packages (bsc#981743) - version 1.13.6 ----------------------------------------------------------------------------- -------------- next part --------------

Ahoy Beta tester!

we are happy to announce RC3 of

  • SUSE Linux Enterprise Server 12 SP2,
  • SUSE Linux Enterprise Software Development Kit 12 SP2.

Download

The ISO images are available at:
https://www.suse.com/support/beta-program/secure/beta-sle.html#download

For installation purposes you just need Media 1 for your architecture (ppc64le,
s390x and x86_64).
Please verify the sha256sum of the ISO using the SHA256SUMS file, which can be
found on the download page.

Milestones details

The Release Candidate 3 is the last beta release per se. The next version will be
Gold Master Candidate
as stated in the releases schedule plan.

Known issues

SLE:

Registration is not working with your regular SLE key, special Registration
Code is required.
Thus, you don't have access to the SLE online channels
and Modules without a Beta Registration Code. Please contact us at
beta-programs at lists.suse.com to request a Beta Registration Code.

SLED and SLE-WE

SLED and the Workstation Extension releases are delayed!
Reason is bsc#1000648, which is about a migration tool for NetworkManager being
a little bit to ecstatic.

The issue only appears if you do an upgrade from a previous version, and only on
the two mentioned products, so we decided to release the rest of the family, giving
you time for downloading and tests over the weekend, SLED and SLE-WE will
follow as soon as we have images with a fix and correct behavior of the
migration part.

ChangeLog

Find attached the changelog differences between SLES 12 SP2 RC2 and SLES 12
SP2 RC3 images (Filename: SLE-12-SP2-Server-ChangeLog-RC2-RC3.txt).

The complete list of changes between SLES 12 SP1 and SLES 12 SP2 can be found
on DVD1 of SLES 12 SP2 Beta (Filename: ChangeLog).

Questions?

Please refer to our dedicated SLE Beta Program webpage for any general information
about the SUSE Linux Enterprise Beta Program. However, do not hesitate to contact
us at beta-programs at lists.suse.com if you have any questions.

Thanks in advance and have fun beta testing!

Your SUSE Linux Enterprise Team

-------------- next part -------------- An HTML attachment was scrubbed... URL: From Dick.Waite at softwareag.com Tue Sep 27 09:42:55 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Tue, 27 Sep 2016 15:42:55 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag>, <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag>, <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> Evening All, Running with RC3 and still issues with NetworkManger 1.n and it's Branding... Who / What should supply the branding-SLE ??? I have just updated a machine and this machine has a SLE/WE environment and blow me, NetworkManager is a happy chappy, it's got it's branding... could it be it's slunk into the SLE/WE ? If so can some kind body move it into a more common area.... __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 10:27 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Many Thanks to A.N.Other, I was asked not to give a name... NetworkManager 0.9.8.10-3.9 works NetworkManager 1.0.12-7.2 gives the issue If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 10:03 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 09:58 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Grand New Monday, Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... This is a part of a working log... 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda This is part of a non-working log 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false __R ________________________________________ From: Waite, Dick (External) Sent: 30 August 2016 09:20 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. __R rjw8-os-42-1:~ # yast2 Run command: /sbin/yast2 disk & *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] /sbin/dmraid(main+0x64)[0x401824] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] /sbin/dmraid[0x401855] ======= Memory map: ======== 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid 01263000-01284000 rw-p 00000000 00:00 0 [heap] 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] rjw8-os-42-1:~ # ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 10:32 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 For those who want to see a working version.... __R ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 07:59 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Morning, Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. Regards, __R ________________________________________ From: Waite, Dick (External) Sent: 28 August 2016 16:57 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Sunny Sunday, I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. I'm not in SAG Sept 30th and 31st. __R ________________________________________ From: Waite, Dick (External) Sent: 23 August 2016 13:04 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Tuesday August 23, 2016, I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... __R -----Original Message----- From: Waite, Dick (External) Sent: Dienstag, 16. August 2016 10:11 To: 'Vincent Moutoussamy' Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: RE: [sles-beta] Yast Expert Partitioner Grand Sunny Tuesday, August 16, 2016 It's still an issue with RC1 Vincent. ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Freitag, 12. August 2016 17:23 To: Waite, Dick (External) Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner Hi, Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). Have a nice week-end, Regards -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: > > Many Thanks Arvin, > > I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. > > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(createBackupState):8065 comp:true > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-messages.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", > "/tmp", "/usr/local"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", > "/var/run", "/tmp", "/var/lock"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > rjw5-12-2-02:~ # hostnamectl > Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: > rjw5-12-2-02 > Icon name: computer-vm > Chassis: vm > Machine ID: 84fe036142867102e170848d515a752d > Boot ID: 292213543b8a4fce91b5a29d27e23e1d > Virtualization: vmware > Operating System: SUSE Linux Enterprise Server 12 SP2 > CPE OS Name: cpe:/o:suse:sles:12:sp2 > Kernel: Linux 4.4.15-53-default > Architecture: x86-64 > > > rjw5-12-2-02:~ # uname -a > Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC > 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux > > > -----Original Message----- > From: sles-beta-bounces at lists.suse.com > [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell > Sent: Montag, 1. August 2016 11:03 > To: sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >> SUSE can I run this in a debug mode to try and find out where the issues are ? > > Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: > > [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" > > Maybe some external command is very slow. > > Kind Regards, > Arvin > > -- > Arvin Schnell, > Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: > Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG > N?rnberg) Maxfeldstra?e 5 > 90409 N?rnberg > Germany > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 > Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt > HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich > (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd > Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory > Board: Dr. Andreas Bereczky - http://www.softwareag.com > > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From Dick.Waite at softwareag.com Tue Sep 27 14:28:41 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Tue, 27 Sep 2016 20:28:41 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag>, <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag>, <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag>, <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E10D13@hqmbx6.eur.ad.sag> What a Grand Evening, "Enterprise Workstation Extension".... This is where the Branding-SLE is hiding out. You only get the opportunity to install the beast if you un-tick the Beta masking box. So good SUSE, can you move what ever you need to move out of EWE so that NetworkManager 1.0.n.n.n can have it's Branding and then one also get's Partitioner running without it's 3 minute hangs. We can not have "Beta" software running in "Production" QE/QE test environment machines now can we, and it's seems it's only a config file to boot... Feeling good. "It's grand when you get those +ve wave thoughts Moriarty", a grand film to do your ironing too. Jiri I think we can close the bugzilla when the bits and bobs have been moved into the right environments. I think the ball is in your court Vincent. __R ________________________________________ From: Waite, Dick (External) Sent: 27 September 2016 17:42 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Evening All, Running with RC3 and still issues with NetworkManger 1.n and it's Branding... Who / What should supply the branding-SLE ??? I have just updated a machine and this machine has a SLE/WE environment and blow me, NetworkManager is a happy chappy, it's got it's branding... could it be it's slunk into the SLE/WE ? If so can some kind body move it into a more common area.... __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 10:27 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Many Thanks to A.N.Other, I was asked not to give a name... NetworkManager 0.9.8.10-3.9 works NetworkManager 1.0.12-7.2 gives the issue If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 10:03 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) __R ________________________________________ From: Waite, Dick (External) Sent: 05 September 2016 09:58 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 Grand New Monday, Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... This is a part of a working log... 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda This is part of a non-working log 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false __R ________________________________________ From: Waite, Dick (External) Sent: 30 August 2016 09:20 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. __R rjw8-os-42-1:~ # yast2 Run command: /sbin/yast2 disk & *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] /sbin/dmraid(main+0x64)[0x401824] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] /sbin/dmraid[0x401855] ======= Memory map: ======== 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid 01263000-01284000 rw-p 00000000 00:00 0 [heap] 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] rjw8-os-42-1:~ # ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 10:32 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 For those who want to see a working version.... __R ________________________________________ From: Waite, Dick (External) Sent: 29 August 2016 07:59 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Morning, Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. Regards, __R ________________________________________ From: Waite, Dick (External) Sent: 28 August 2016 16:57 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Sunny Sunday, I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. I'm not in SAG Sept 30th and 31st. __R ________________________________________ From: Waite, Dick (External) Sent: 23 August 2016 13:04 To: 'Vincent Moutoussamy' Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 Grand Tuesday August 23, 2016, I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... __R -----Original Message----- From: Waite, Dick (External) Sent: Dienstag, 16. August 2016 10:11 To: 'Vincent Moutoussamy' Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: RE: [sles-beta] Yast Expert Partitioner Grand Sunny Tuesday, August 16, 2016 It's still an issue with RC1 Vincent. ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Freitag, 12. August 2016 17:23 To: Waite, Dick (External) Cc: Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner Hi, Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). Have a nice week-end, Regards -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: > > Many Thanks Arvin, > > I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. > > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(createBackupState):8065 comp:true > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] > YIconLoader.cc(findIcon):100 Found yast-messages.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", > "/tmp", "/usr/local"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] > modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", > "/var/run", "/tmp", "/var/lock"] > 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] > Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > rjw5-12-2-02:~ # hostnamectl > Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: > rjw5-12-2-02 > Icon name: computer-vm > Chassis: vm > Machine ID: 84fe036142867102e170848d515a752d > Boot ID: 292213543b8a4fce91b5a29d27e23e1d > Virtualization: vmware > Operating System: SUSE Linux Enterprise Server 12 SP2 > CPE OS Name: cpe:/o:suse:sles:12:sp2 > Kernel: Linux 4.4.15-53-default > Architecture: x86-64 > > > rjw5-12-2-02:~ # uname -a > Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC > 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux > > > -----Original Message----- > From: sles-beta-bounces at lists.suse.com > [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell > Sent: Montag, 1. August 2016 11:03 > To: sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >> SUSE can I run this in a debug mode to try and find out where the issues are ? > > Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: > > [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" > > Maybe some external command is very slow. > > Kind Regards, > Arvin > > -- > Arvin Schnell, > Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: > Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG > N?rnberg) Maxfeldstra?e 5 > 90409 N?rnberg > Germany > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 > Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt > HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich > (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd > Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory > Board: Dr. Andreas Bereczky - http://www.softwareag.com > > _______________________________________________ > sles-beta mailing list > sles-beta at lists.suse.com > http://lists.suse.com/mailman/listinfo/sles-beta Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From vmoutoussamy at suse.com Wed Sep 28 08:41:48 2016 From: vmoutoussamy at suse.com (Vincent Moutoussamy) Date: Wed, 28 Sep 2016 16:41:48 +0200 Subject: [sles-beta] s390x issues In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E0BB16@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E0BB16@hqmbx6.eur.ad.sag> Message-ID: <8927AAF3-5460-4A6F-A80F-3E2B5CFBA415@suse.com> Hi, Please let me know if you can reproduce this on RC3. Have a nice day, Regards, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 20 Sep 2016, at 12:14, Waite, Dick (External) wrote: > > Grand Day, > > I could update a SLES12 SP-1 GA to SLES12 SP-2 Beta2. > I can not update a SLES12 SP-1 GA to SLES12 SP-2 RC2. The update looks Okay but on the re-ipl there are issues with /dev and LV's > I did not see any nags on the list so I thought I'm making an error somewhere. I don't think I'm making an error, I think something is broken. > Looking forward to seeing if RC3 can update from SLES12 SP-1 GA > FWIW I can not update from SLES12 SP-2 Beta2 to RC2 either. Again the /dev and LV's are not there... > __R > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com > From vmoutoussamy at suse.com Wed Sep 28 08:51:46 2016 From: vmoutoussamy at suse.com (Vincent Moutoussamy) Date: Wed, 28 Sep 2016 16:51:46 +0200 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E10D13@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10D13@hqmbx6.eur.ad.sag> Message-ID: Hi Dick, Please take a look at bugzilla, we are waiting for our output at https://bugzilla.suse.com/show_bug.cgi?id=997254. Second, please do not mix multiple issue in one thread, start a new conversation or a bug report and be more specific about the branding issue you have seen. Regards, PS: I would also suggest to read our bugzilla/bug report guideline at https://www.suse.com/support/beta-program/secure/beta-guideline.html#q3 -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 27 Sep 2016, at 22:28, Waite, Dick (External) wrote: > > What a Grand Evening, > "Enterprise Workstation Extension".... This is where the Branding-SLE is hiding out. You only get the opportunity to install the beast if you un-tick the Beta masking box. > > So good SUSE, can you move what ever you need to move out of EWE so that NetworkManager 1.0.n.n.n can have it's Branding and then one also get's Partitioner running without it's 3 minute hangs. > > We can not have "Beta" software running in "Production" QE/QE test environment machines now can we, and it's seems it's only a config file to boot... > > Feeling good. "It's grand when you get those +ve wave thoughts Moriarty", a grand film to do your ironing too. > > Jiri I think we can close the bugzilla when the bits and bobs have been moved into the right environments. > > I think the ball is in your court Vincent. > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 27 September 2016 17:42 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Evening All, > > Running with RC3 and still issues with NetworkManger 1.n and it's Branding... Who / What should supply the branding-SLE ??? > > I have just updated a machine and this machine has a SLE/WE environment and blow me, NetworkManager is a happy chappy, it's got it's branding... could it be it's slunk into the SLE/WE ? > > If so can some kind body move it into a more common area.... > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 10:27 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Many Thanks to A.N.Other, I was asked not to give a name... > > NetworkManager 0.9.8.10-3.9 works > NetworkManager 1.0.12-7.2 gives the issue > > If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. > > So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... > > __R > > > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 10:03 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Just in case I'm asked, I can clone a working machine from home_office to SAG and it will fail, I can clone a failing machine from SAG to home_office and it will work. From my eye-balls the Networks are the same, all NAT but home_office is simple 192.168.2.1 and SAG is well there is quite a large group looking after it ;o) > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 09:58 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Grand New Monday, > > Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" > So maybe a SUSE good person can take a look and let me know what I should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE > I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... > > This is a part of a working log... > > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay > 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known > 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", "/tmp", "/usr/local"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", "/var/run", "/tmp", "/var/lock"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > This is part of a non-working log > > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8062 states:disk,expert-partitioner,initial > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: verbose:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins > 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 Given filename: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 Preferring subdir: /usr/share/YaST2 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 Looking for: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 Looking in /usr/lib64/yui > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 Could NOT find libyui-qt-graph.so.7 by looking recursive inside /usr/lib64/yui > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": libyui-qt-graph.so.7: cannot open shared object file: No such file or directory > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not provide GP symbol > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-raid.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-encrypted.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-nfs.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-unused-device.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-disk.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-spanner.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] modules/Partitions.rb:150 EfiBoot ret:false > > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 30 August 2016 09:20 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. > > __R > > rjw8-os-42-1:~ # yast2 > Run command: /sbin/yast2 disk & > *** Error in `/sbin/dmraid': free(): invalid pointer: 0x0000000001263520 *** > ======= Backtrace: ========= > /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] > /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] > /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162] > /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] > /sbin/dmraid(main+0x64)[0x401824] > /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] > /sbin/dmraid[0x401855] > ======= Memory map: ======== > 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid > 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid > 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid > 01263000-01284000 rw-p 00000000 00:00 0 [heap] > 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so > 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 > 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 > 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so > 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 > 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 > 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 > 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 > 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 > 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] > 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] > 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] > ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] > rjw8-os-42-1:~ # > > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 10:32 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > For those who want to see a working version.... > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 07:59 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Morning, > > Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... > > 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time 1800 sec, renew in 900 sec, rebind in 1575 sec) > 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main scope universe protocol dhcp covered by a ipv4:dhcp lease > 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. > > Regards, > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 28 August 2016 16:57 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Sunny Sunday, > > I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. > I'm not in SAG Sept 30th and 31st. > > __R > > ________________________________________ > From: Waite, Dick (External) > Sent: 23 August 2016 13:04 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Tuesday August 23, 2016, > > I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. > Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... > > __R > > > > -----Original Message----- > From: Waite, Dick (External) > Sent: Dienstag, 16. August 2016 10:11 > To: 'Vincent Moutoussamy' > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: RE: [sles-beta] Yast Expert Partitioner > > Grand Sunny Tuesday, August 16, 2016 > > It's still an issue with RC1 Vincent. > > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution > > Should I create a SR ? One does get the GUI output in the end but with a L O N G delay of 14 mins > > __R > > -----Original Message----- > From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] > Sent: Freitag, 12. August 2016 17:23 > To: Waite, Dick (External) > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > Hi, > > Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). > > Have a nice week-end, > > Regards > -- > Vincent Moutoussamy > SUSE Beta Program and SDK Project Manager > > > >> On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: >> >> Many Thanks Arvin, >> >> I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. >> >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: >> verbose:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8184 ret:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(createBackupState):8065 comp:true >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 >> Given filename: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 >> Preferring subdir: /usr/share/YaST2 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 >> Looking for: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 >> Looking in /usr/lib64/yui >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 >> Could NOT find libyui-qt-graph.so.7 by looking recursive inside >> /usr/lib64/yui >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] >> YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": >> libyui-qt-graph.so.7: cannot open shared object file: No such file or >> directory >> >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-spanner.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-messages.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Partitions.rb:150 EfiBoot ret:false >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", >> "/tmp", "/usr/local"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", >> "/var/run", "/tmp", "/var/lock"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(getIgnoreFstab):3145 device:/dev/sda >> >> rjw5-12-2-02:~ # hostnamectl >> Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: >> rjw5-12-2-02 >> Icon name: computer-vm >> Chassis: vm >> Machine ID: 84fe036142867102e170848d515a752d >> Boot ID: 292213543b8a4fce91b5a29d27e23e1d >> Virtualization: vmware >> Operating System: SUSE Linux Enterprise Server 12 SP2 >> CPE OS Name: cpe:/o:suse:sles:12:sp2 >> Kernel: Linux 4.4.15-53-default >> Architecture: x86-64 >> >> >> rjw5-12-2-02:~ # uname -a >> Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC >> 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux >> >> >> -----Original Message----- >> From: sles-beta-bounces at lists.suse.com >> [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell >> Sent: Montag, 1. August 2016 11:03 >> To: sles-beta at lists.suse.com >> Subject: Re: [sles-beta] Yast Expert Partitioner >> >> On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >>> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >>> SUSE can I run this in a debug mode to try and find out where the issues are ? >> >> Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: >> >> [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" >> >> Maybe some external command is very slow. >> >> Kind Regards, >> Arvin >> >> -- >> Arvin Schnell, >> Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: >> Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG >> N?rnberg) Maxfeldstra?e 5 >> 90409 N?rnberg >> Germany >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta >> >> Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 >> Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt >> HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich >> (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd >> Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory >> Board: Dr. Andreas Bereczky - http://www.softwareag.com >> >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta > > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com > From Dick.Waite at softwareag.com Thu Sep 29 02:05:38 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Thu, 29 Sep 2016 08:05:38 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10D13@hqmbx6.eur.ad.sag> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E113C5@hqmbx6.eur.ad.sag> Grand New Thursday Vincent, Sorry about the delay, I do have to work for SAG some times ;o) I have updated the Bugzilla, the reason I used the forum was one could understand the other good people on the forum would also fall over this and you have written in the Bugzilla that you understood NetworkManager was part of EWE or the Branding was so I then thought, wrongly it seems, that you would copy/move the branding to somewhere it could be found when NetworkManager needed it. I get asked for a email address when I try to access the link you gave below. I think I have been very clear, a number of times about the issues with Branding-SLE and NetworkManager 1.n I see very few other people chatting in the forums, I wonder why they are not getting the same issues with partitioner as I see, unless they all have installed the Beta EWE. Now I know what the issues are, I just wait the 10 mins for partitioner to respond, I'm using fdisk -l more now. From what I see it's only Partitioner that get the issues, but then it's a very clear bug that I think needs fixing, but I can run with the work-a-round. Wishing you all a grand day, and sorry Jiri for not putting good words into the Bugzilla, but I thought my emails to you covered the points. __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Mittwoch, 28. September 2016 16:52 To: Waite, Dick (External) Cc: jsrain at suse.com; Arvin Schnell; sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner - RC2 Hi Dick, Please take a look at bugzilla, we are waiting for our output at https://bugzilla.suse.com/show_bug.cgi?id=997254. Second, please do not mix multiple issue in one thread, start a new conversation or a bug report and be more specific about the branding issue you have seen. Regards, PS: I would also suggest to read our bugzilla/bug report guideline at https://www.suse.com/support/beta-program/secure/beta-guideline.html#q3 -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 27 Sep 2016, at 22:28, Waite, Dick (External) wrote: > > What a Grand Evening, > "Enterprise Workstation Extension".... This is where the Branding-SLE is hiding out. You only get the opportunity to install the beast if you un-tick the Beta masking box. > > So good SUSE, can you move what ever you need to move out of EWE so that NetworkManager 1.0.n.n.n can have it's Branding and then one also get's Partitioner running without it's 3 minute hangs. > > We can not have "Beta" software running in "Production" QE/QE test environment machines now can we, and it's seems it's only a config file to boot... > > Feeling good. "It's grand when you get those +ve wave thoughts Moriarty", a grand film to do your ironing too. > > Jiri I think we can close the bugzilla when the bits and bobs have been moved into the right environments. > > I think the ball is in your court Vincent. > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 27 September 2016 17:42 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Evening All, > > Running with RC3 and still issues with NetworkManger 1.n and it's Branding... Who / What should supply the branding-SLE ??? > > I have just updated a machine and this machine has a SLE/WE environment and blow me, NetworkManager is a happy chappy, it's got it's branding... could it be it's slunk into the SLE/WE ? > > If so can some kind body move it into a more common area.... > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 10:27 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Many Thanks to A.N.Other, I was asked not to give a name... > > NetworkManager 0.9.8.10-3.9 works > NetworkManager 1.0.12-7.2 gives the issue > > If I try to update from the lower version on Windows I get "nothing provides NetworkManager-branding needed by ....So it stays at the lower (working) level. On Linux host it finds the "branding" so uses the high, non working version. > > So there we are, simple when you know a version of NetworkManger is broken. I'll be back from my road-trip for the new drop, maybe then there is a fix to the grand NetworkManager.... > > __R > > > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 10:03 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Just in case I'm asked, I can clone a working machine from home_office > to SAG and it will fail, I can clone a failing machine from SAG to > home_office and it will work. From my eye-balls the Networks are the > same, all NAT but home_office is simple 192.168.2.1 and SAG is well > there is quite a large group looking after it ;o) __R > ________________________________________ > From: Waite, Dick (External) > Sent: 05 September 2016 09:58 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC2 > > Grand New Monday, > > Not sure many are interested but I'm still getting a n minute delay on some machines when using Partitioner and it's still there with RC2... On a non-delay macine we get "Name or service not known", on a machine that get a depaly it's "Temporary failure in name resolution" > So maybe a SUSE good person can take a look and let me know what I > should change. You do have time as I'm on the road for the next few days. I do not get an issue on my home_office, simpel 192.168.2.1 using NAT it's in the SG office and using NAT I sometimes get an issue. On a VMware Linux host very often, on a Windows 7 hosting VMware not so often, if ever. Ther are both using the same level of VMware Workstation and tools are from SUSE I agree it's no show stopper but it's not working as required...A SUSE network person knows why the word "temporary" comes up, can you let me know why and maybe I can fix the issue and we can all enjoy peace.... > > This is a part of a working log... > > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] > Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [bash] ShellCommand.cc(shellcommand):78 hostname: Name or service not known <=========== We use a fallback hostname, no delay > 2016-09-05 09:18:43 <2> rjw3-12-2-00(12135) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > 2016-09-05 09:18:43 <3> rjw3-12-2-00(12135) [qt-ui] > YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not > provide GP symbol > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-disk.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-disk.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-raid.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-encrypted.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-nfs.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-nfs.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-nfs.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-unused-device.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-disk.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:43 <1> rjw3-12-2-00(12135) [ui] > YIconLoader.cc(findIcon):100 Found yast-messages.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 09:18:44 <3> rjw3-12-2-00(12135) [bash] > ShellCommand.cc(shellcommand):78 hostname: Name or service not known > 2016-09-05 09:18:44 <2> rjw3-12-2-00(12135) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw3-12-2-00.eur.ad.sag > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] > modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", > "/tmp", "/usr/local"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [Ruby] > modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", > "/var/run", "/tmp", "/var/lock"] > 2016-09-05 09:18:44 <1> rjw3-12-2-00(12135) [libstorage] > Storage.cc(getIgnoreFstab):3145 device:/dev/sda > > This is part of a non-working log > > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] > Storage.cc(createBackupState):8062 > states:disk,expert-partitioner,initial > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] > Storage.cc(createBackupState):8063 ret:0 > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] > Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: > verbose:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] > Storage.cc(equalBackupStates):8184 ret:true > 2016-09-05 08:05:13 <1> rjw8-12-2-00(13285) [libstorage] Storage.cc(createBackupState):8065 comp:true > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary, note the delay of 3 mins > 2016-09-05 08:08:23 <2> rjw8-12-2-00(13285) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):49 > Given filename: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):65 > Preferring subdir: /usr/share/YaST2 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):66 Subdir given with filename: > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):67 > Looking for: libyui-qt-graph.so.7 > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(lsDir):138 > Looking in /usr/lib64/yui > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YPath.cc(YPath):121 > Could NOT find libyui-qt-graph.so.7 by looking recursive inside > /usr/lib64/yui > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [ui] > YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": > libyui-qt-graph.so.7: cannot open shared object file: No such file or > directory > 2016-09-05 08:08:23 <3> rjw8-12-2-00(13285) [qt-ui] > YQGraphPluginStub.cc(YQGraphPluginStub):46 Plugin qt-graph does not > provide GP symbol > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-disk.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-disk.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-raid.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-lvm_config.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-encrypted.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-device-mapper.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-nfs.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-nfs.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-nfs.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-unused-device.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-disk.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] > YIconLoader.cc(findIcon):100 Found yast-spanner.png in > /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:08:23 <1> rjw8-12-2-00(13285) [ui] YIconLoader.cc(findIcon):100 Found yast-messages.png in /usr/share/YaST2/theme/current/icons/ search path > 2016-09-05 08:11:34 <3> rjw8-12-2-00(13285) [bash] ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name resolution <----------------- Temporary !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > 2016-09-05 08:11:34 <2> rjw8-12-2-00(13285) [Ruby] > modules/Hostname.rb:161 Using fallback hostname > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] > modules/Hostname.rb:171 Current FQDN: rjw8-12-2-00.eur.ad.sag > 2016-09-05 08:11:34 <1> rjw8-12-2-00(13285) [Ruby] > modules/Partitions.rb:150 EfiBoot ret:false > > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 30 August 2016 09:20 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > If it helps. I was on a LEAP42.1 machine and used @Partitioner@ and got these messages, I also got the GUI output after a while. With RC2 just around the corner I'll pause on this issue, I'm sure it's fixed by then. > > __R > > rjw8-os-42-1:~ # yast2 > Run command: /sbin/yast2 disk & > *** Error in `/sbin/dmraid': free(): invalid pointer: > 0x0000000001263520 *** ======= Backtrace: ========= > /lib64/libc.so.6(+0x7277f)[0x7f4de73f177f] > /lib64/libc.so.6(+0x78026)[0x7f4de73f7026] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x8338)[0x7f4de7b7d338] > /lib64/libdmraid.so.1.0.0.rc16-3(+0x7c7c)[0x7f4de7b7cc7c] > /lib64/libdmraid.so.1.0.0.rc16-3(discover_devices+0xb2)[0x7f4de7b7d162 > ] /lib64/libdmraid.so.1.0.0.rc16-3(lib_perform+0xe0)[0x7f4de7b834f0] > /sbin/dmraid(main+0x64)[0x401824] > /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f4de73a0b25] > /sbin/dmraid[0x401855] > ======= Memory map: ======== > 00400000-00404000 r-xp 00000000 fe:00 237817 /sbin/dmraid > 00603000-00604000 r--p 00003000 fe:00 237817 /sbin/dmraid > 00604000-00605000 rw-p 00004000 fe:00 237817 /sbin/dmraid > 01263000-01284000 rw-p 00000000 00:00 0 [heap] > 7f4de64a0000-7f4de64b6000 r-xp 00000000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de64b6000-7f4de66b5000 ---p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b5000-7f4de66b6000 r--p 00015000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b6000-7f4de66b7000 rw-p 00016000 fe:00 262290 /lib64/libgcc_s.so.1 > 7f4de66b7000-7f4de66be000 r-xp 00000000 fe:00 262449 /lib64/librt-2.19.so > 7f4de66be000-7f4de68bd000 ---p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bd000-7f4de68be000 r--p 00006000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68be000-7f4de68bf000 rw-p 00007000 fe:00 262449 /lib64/librt-2.19.so > 7f4de68bf000-7f4de6924000 r-xp 00000000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6924000-7f4de6b23000 ---p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b23000-7f4de6b24000 r--p 00064000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b24000-7f4de6b25000 rw-p 00065000 fe:00 451145 /usr/lib64/libpcre.so.1.2.1 > 7f4de6b25000-7f4de6b3d000 r-xp 00000000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6b3d000-7f4de6d3c000 ---p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3c000-7f4de6d3d000 r--p 00017000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3d000-7f4de6d3e000 rw-p 00018000 fe:00 262370 /lib64/libpthread-2.19.so > 7f4de6d3e000-7f4de6d42000 rw-p 00000000 00:00 0 > 7f4de6d42000-7f4de6d53000 r-xp 00000000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6d53000-7f4de6f52000 ---p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f52000-7f4de6f53000 r--p 00010000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f53000-7f4de6f54000 rw-p 00011000 fe:00 450606 /usr/lib64/libudev.so.1.4.0 > 7f4de6f54000-7f4de6f75000 r-xp 00000000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de6f75000-7f4de7174000 ---p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7174000-7f4de7175000 r--p 00020000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7175000-7f4de7176000 rw-p 00021000 fe:00 262495 /lib64/libselinux.so.1 > 7f4de7176000-7f4de7178000 rw-p 00000000 00:00 0 > 7f4de7178000-7f4de717e000 r-xp 00000000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de717e000-7f4de737d000 ---p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737d000-7f4de737e000 r--p 00005000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737e000-7f4de737f000 rw-p 00006000 fe:00 262375 /lib64/libdevmapper-event.so.1.02 > 7f4de737f000-7f4de751d000 r-xp 00000000 fe:00 262410 /lib64/libc-2.19.so > 7f4de751d000-7f4de771d000 ---p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de771d000-7f4de7721000 r--p 0019e000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7721000-7f4de7723000 rw-p 001a2000 fe:00 262410 /lib64/libc-2.19.so > 7f4de7723000-7f4de7727000 rw-p 00000000 00:00 0 > 7f4de7727000-7f4de772a000 r-xp 00000000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de772a000-7f4de7929000 ---p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de7929000-7f4de792a000 r--p 00002000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792a000-7f4de792b000 rw-p 00003000 fe:00 262416 /lib64/libdl-2.19.so > 7f4de792b000-7f4de7971000 r-xp 00000000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7971000-7f4de7b70000 ---p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b70000-7f4de7b71000 r--p 00045000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b71000-7f4de7b74000 rw-p 00046000 fe:00 262350 /lib64/libdevmapper.so.1.02 > 7f4de7b74000-7f4de7b75000 rw-p 00000000 00:00 0 > 7f4de7b75000-7f4de7ba8000 r-xp 00000000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7ba8000-7f4de7da8000 ---p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da8000-7f4de7da9000 r--p 00033000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7da9000-7f4de7dab000 rw-p 00034000 fe:00 262366 /lib64/libdmraid.so.1.0.0.rc16-3 > 7f4de7dab000-7f4de7dcc000 r-xp 00000000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7f95000-7f4de7f9c000 rw-p 00000000 00:00 0 > 7f4de7fc9000-7f4de7fcb000 rw-p 00000000 00:00 0 > 7f4de7fcb000-7f4de7fcc000 r--p 00020000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcc000-7f4de7fcd000 rw-p 00021000 fe:00 262284 /lib64/ld-2.19.so > 7f4de7fcd000-7f4de7fce000 rw-p 00000000 00:00 0 > 7ffdbd2b3000-7ffdbd2d4000 rw-p 00000000 00:00 0 [stack] > 7ffdbd39b000-7ffdbd39d000 r--p 00000000 00:00 0 [vvar] > 7ffdbd39d000-7ffdbd39f000 r-xp 00000000 00:00 0 [vdso] > ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] > rjw8-os-42-1:~ # > > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 10:32 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > For those who want to see a working version.... > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 29 August 2016 07:59 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Morning, > > Last look at this issue. The Y2log and var/log/messages. There are some nags in the messages about the right time... > > 2016-08-29T07:34:31.923195+02:00 rjw5-12-2-01 wickedd-dhcp4[1360]: > eth0: Committed DHCPv4 lease with address 192.168.6.129 (lease time > 1800 sec, renew in 900 sec, rebind in 1575 sec) > 2016-08-29T07:34:31.934475+02:00 rjw5-12-2-01 wickedd[1377]: route > ipv4 0.0.0.0/0 via 192.168.6.2 dev eth0#2 type unicast table main > scope universe protocol dhcp covered by a ipv4:dhcp lease > 2016-08-29T07:35:02.402894+02:00 rjw5-12-2-01 kernel: [ 954.162537] > BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > 2016-08-29T07:35:02.402909+02:00 rjw5-12-2-01 kernel: [ 954.162550] EDD information not available. > > Regards, > > __R > ________________________________________ > From: Waite, Dick (External) > Sent: 28 August 2016 16:57 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Sunny Sunday, > > I will be in SAG tomorrow morning, Monday 29th, if you let me know what debug info you need I'll try and obtain it. I can not access these machines from outside of SAG. Looking at the logs inside Partitioner I don't think it is the "hostname" stuff, it's what's going on before hand . Would be grand to fix this before RCn on Sept 1st. > I'm not in SAG Sept 30th and 31st. > > __R > > ________________________________________ > From: Waite, Dick (External) > Sent: 23 August 2016 13:04 > To: 'Vincent Moutoussamy' > Cc: 'Arvin Schnell'; 'sles-beta at lists.suse.com' > Subject: RE: [sles-beta] Yast Expert Partitioner - RC1 > > Grand Tuesday August 23, 2016, > > I have some VMware machines very happy running Partitioner and some get there in the end after some name issues. This is with RC1 and up-2-date version on VM-tools. > Some machines run without issues. If I'm given some more information to give you some more information maybe we can fix this... > > __R > > > > -----Original Message----- > From: Waite, Dick (External) > Sent: Dienstag, 16. August 2016 10:11 > To: 'Vincent Moutoussamy' > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: RE: [sles-beta] Yast Expert Partitioner > > Grand Sunny Tuesday, August 16, 2016 > > It's still an issue with RC1 Vincent. > > ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name > resolution > > Should I create a SR ? One does get the GUI output in the end but with > a L O N G delay of 14 mins > > __R > > -----Original Message----- > From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] > Sent: Freitag, 12. August 2016 17:23 > To: Waite, Dick (External) > Cc: Arvin Schnell; sles-beta at lists.suse.com > Subject: Re: [sles-beta] Yast Expert Partitioner > > Hi, > > Let us know, if you find the root cause of this issue and if you can reproduce it with RC1 ; ). > > Have a nice week-end, > > Regards > -- > Vincent Moutoussamy > SUSE Beta Program and SDK Project Manager > > > >> On 01 Aug 2016, at 12:42, Waite, Dick (External) wrote: >> >> Many Thanks Arvin, >> >> I see it's getting stuck on "Hostname" for three mins, twice... the cmd hostnamectl status returns the correct name. Knowing what the issue is I can work on and come back to this one later. Again many thanks for the speedy response. >> >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8134 lhs:expert-partitioner rhs: >> verbose:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(equalBackupStates):8184 ret:true >> 2016-08-01 11:11:20 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(createBackupState):8065 comp:true >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:14:31 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):49 >> Given filename: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YSettings.cc(progDir):73 progDir: "/usr/share/YaST2" >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):65 >> Preferring subdir: /usr/share/YaST2 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):66 Subdir given with filename: >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):67 >> Looking for: libyui-qt-graph.so.7 >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(lsDir):138 >> Looking in /usr/lib64/yui >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] YPath.cc(YPath):121 >> Could NOT find libyui-qt-graph.so.7 by looking recursive inside >> /usr/lib64/yui >> 2016-08-01 11:14:31 <3> rjw5-12-2-02(4225) [ui] >> YUIPlugin.cc(YUIPlugin):50 Could not load UI plugin "qt-graph": >> libyui-qt-graph.so.7: cannot open shared object file: No such file or >> directory >> >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-spanner.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:14:31 <1> rjw5-12-2-02(4225) [ui] >> YIconLoader.cc(findIcon):100 Found yast-messages.png in >> /usr/share/YaST2/theme/current/icons/ search path >> 2016-08-01 11:17:41 <3> rjw5-12-2-02(4225) [bash] >> ShellCommand.cc(shellcommand):78 hostname: Temporary failure in name >> resolution >> 2016-08-01 11:17:41 <2> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:161 Using fallback hostname >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Hostname.rb:171 Current FQDN: rjw5-12-2-02.eur.ad.sag >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/Partitions.rb:150 EfiBoot ret:false >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:461 SuggestMPoints ret:["/home", "/srv", >> "/tmp", "/usr/local"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [Ruby] >> modules/FileSystems.rb:470 SuggestTmpfsMPoints ret:["/run", >> "/var/run", "/tmp", "/var/lock"] >> 2016-08-01 11:17:41 <1> rjw5-12-2-02(4225) [libstorage] >> Storage.cc(getIgnoreFstab):3145 device:/dev/sda >> >> rjw5-12-2-02:~ # hostnamectl >> Static hostname: rjw5-12-2-02.eur.ad.sag Transient hostname: >> rjw5-12-2-02 >> Icon name: computer-vm >> Chassis: vm >> Machine ID: 84fe036142867102e170848d515a752d >> Boot ID: 292213543b8a4fce91b5a29d27e23e1d >> Virtualization: vmware >> Operating System: SUSE Linux Enterprise Server 12 SP2 >> CPE OS Name: cpe:/o:suse:sles:12:sp2 >> Kernel: Linux 4.4.15-53-default >> Architecture: x86-64 >> >> >> rjw5-12-2-02:~ # uname -a >> Linux rjw5-12-2-02 4.4.15-53-default #1 SMP Mon Jul 18 13:39:49 UTC >> 2016 (0b50c2c) x86_64 x86_64 x86_64 GNU/Linux >> >> >> -----Original Message----- >> From: sles-beta-bounces at lists.suse.com >> [mailto:sles-beta-bounces at lists.suse.com] On Behalf Of Arvin Schnell >> Sent: Montag, 1. August 2016 11:03 >> To: sles-beta at lists.suse.com >> Subject: Re: [sles-beta] Yast Expert Partitioner >> >> On Mon, Aug 01, 2016 at 08:55:27AM +0000, Waite, Dick (External) wrote: >>> Grand Day, I?m running Beta5 and on my VMware machines the ?partitioner? is taking a long time in the ?initializing? phase. I did not use this with Beta3 or 4 that I remember. I have a number of machines that I ?clone? with VMware from SP1 to SP2 and with SP1 the ?partitioner? is faster, much faster. I have not tried this with physical machines yet. Has anybody else noticed this ? >>> SUSE can I run this in a debug mode to try and find out where the issues are ? >> >> Since the expert partitioner mainly uses external commands to probe the system you can grep for "stopwatch" in /var/log/YaST/y2log. Lines look like: >> >> [...] stopwatch 0.263198s for "/usr/sbin/parted -s '/dev/sda' unit cyl print unit s print" >> >> Maybe some external command is very slow. >> >> Kind Regards, >> Arvin >> >> -- >> Arvin Schnell, >> Senior Software Engineer, Research & Development SUSE Linux GmbH, GF: >> Felix Imend?rffer, Jane Smithard, Graham Norton, HRB 21284 (AG >> N?rnberg) Maxfeldstra?e 5 >> 90409 N?rnberg >> Germany >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta >> >> Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 >> Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt >> HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich >> (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd >> Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory >> Board: Dr. Andreas Bereczky - http://www.softwareag.com >> >> _______________________________________________ >> sles-beta mailing list >> sles-beta at lists.suse.com >> http://lists.suse.com/mailman/listinfo/sles-beta > > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 > Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt > HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich > (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd > Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory > Board: Dr. Andreas Bereczky - http://www.softwareag.com > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com From Dick.Waite at softwareag.com Thu Sep 29 02:06:33 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Thu, 29 Sep 2016 08:06:33 +0000 Subject: [sles-beta] s390x issues In-Reply-To: <8927AAF3-5460-4A6F-A80F-3E2B5CFBA415@suse.com> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E0BB16@hqmbx6.eur.ad.sag> <8927AAF3-5460-4A6F-A80F-3E2B5CFBA415@suse.com> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E113E3@hqmbx6.eur.ad.sag> Will do... __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Mittwoch, 28. September 2016 16:42 To: Waite, Dick (External) Cc: sles-beta at lists.suse.com Subject: Re: [sles-beta] s390x issues Hi, Please let me know if you can reproduce this on RC3. Have a nice day, Regards, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager > On 20 Sep 2016, at 12:14, Waite, Dick (External) wrote: > > Grand Day, > > I could update a SLES12 SP-1 GA to SLES12 SP-2 Beta2. > I can not update a SLES12 SP-1 GA to SLES12 SP-2 RC2. The update looks Okay but on the re-ipl there are issues with /dev and LV's > I did not see any nags on the list so I thought I'm making an error somewhere. I don't think I'm making an error, I think something is broken. > Looking forward to seeing if RC3 can update from SLES12 SP-1 GA > FWIW I can not update from SLES12 SP-2 Beta2 to RC2 either. Again the /dev and LV's are not there... > __R > > Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com > From vmoutoussamy at suse.com Fri Sep 30 08:38:02 2016 From: vmoutoussamy at suse.com (Vincent Moutoussamy) Date: Fri, 30 Sep 2016 16:38:02 +0200 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: <46AC8C81C10B8C48820201DF2AE1D76DF9E113C5@hqmbx6.eur.ad.sag> References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10D13@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E113C5@hqmbx6.eur.ad.sag> Message-ID: Hi, > On 29 Sep 2016, at 10:05, Waite, Dick (External) wrote: > > Grand New Thursday Vincent, > Sorry about the delay, I do have to work for SAG some times ;o) > > I have updated the Bugzilla, the reason I used the forum was one could understand the other good people on the forum would also fall over this and you have written in the Bugzilla that you understood NetworkManager was part of EWE or the Branding was so I then thought, wrongly it seems, that you would copy/move the branding to somewhere it could be found when NetworkManager needed it. I get asked for a email address when I try to access the link you gave below. > I think I have been very clear, a number of times about the issues with Branding-SLE and NetworkManager 1.n I see very few other people chatting in the forums, I wonder why they are not getting the same issues with partitioner as I see, unless they all have installed the Beta EWE. > > Now I know what the issues are, I just wait the 10 mins for partitioner to respond, I'm using fdisk -l more now. From what I see it's only Partitioner that get the issues, but then it's a very clear bug that I think needs fixing, but I can run with the work-a-round. > > Wishing you all a grand day, and sorry Jiri for not putting good words into the Bugzilla, but I thought my emails to you covered the points. Please see my last comment at https://bugzilla.suse.com/show_bug.cgi?id=997254. There is no need to comment bug report on the mailing list, since everybody has access to the bugzilla, thus can CC to the bug report if they are interested. Also, please let?s keep everything concise and technical, because the issue was not clear from our side. Please specify when you are talking about a package because I just catch that you were talking about the NetworkManager-branding-SLE package and there is no such thing as ?EWE?, but SLE WE which stand for SUSE Linux Enterprise Workstation Extension. Regards, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager From Dick.Waite at softwareag.com Fri Sep 30 09:00:34 2016 From: Dick.Waite at softwareag.com (Waite, Dick (External)) Date: Fri, 30 Sep 2016 15:00:34 +0000 Subject: [sles-beta] Yast Expert Partitioner - RC2 In-Reply-To: References: <46AC8C81C10B8C48820201DF2AE1D76DF9E07199@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E071E3@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E07242@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10C01@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E10D13@hqmbx6.eur.ad.sag> <46AC8C81C10B8C48820201DF2AE1D76DF9E113C5@hqmbx6.eur.ad.sag> Message-ID: <46AC8C81C10B8C48820201DF2AE1D76DF9E11B02@hqmbx6.eur.ad.sag> As I said in the Bugzilla. I'll delete all NetworkManager stuff as it's not needed in a standard SLES environment. I'll also delete the SLE WE module as that is also not needed in a SLES environment. I have found Network Manager back in SLES12 SP-0 and I think it's just been updated each time. __R -----Original Message----- From: Vincent Moutoussamy [mailto:vmoutoussamy at suse.com] Sent: Freitag, 30. September 2016 16:38 To: Waite, Dick (External) Cc: sles-beta at lists.suse.com Subject: Re: [sles-beta] Yast Expert Partitioner - RC2 Hi, > On 29 Sep 2016, at 10:05, Waite, Dick (External) wrote: > > Grand New Thursday Vincent, > Sorry about the delay, I do have to work for SAG some times ;o) > > I have updated the Bugzilla, the reason I used the forum was one could understand the other good people on the forum would also fall over this and you have written in the Bugzilla that you understood NetworkManager was part of EWE or the Branding was so I then thought, wrongly it seems, that you would copy/move the branding to somewhere it could be found when NetworkManager needed it. I get asked for a email address when I try to access the link you gave below. > I think I have been very clear, a number of times about the issues with Branding-SLE and NetworkManager 1.n I see very few other people chatting in the forums, I wonder why they are not getting the same issues with partitioner as I see, unless they all have installed the Beta EWE. > > Now I know what the issues are, I just wait the 10 mins for partitioner to respond, I'm using fdisk -l more now. From what I see it's only Partitioner that get the issues, but then it's a very clear bug that I think needs fixing, but I can run with the work-a-round. > > Wishing you all a grand day, and sorry Jiri for not putting good words into the Bugzilla, but I thought my emails to you covered the points. Please see my last comment at https://bugzilla.suse.com/show_bug.cgi?id=997254. There is no need to comment bug report on the mailing list, since everybody has access to the bugzilla, thus can CC to the bug report if they are interested. Also, please let?s keep everything concise and technical, because the issue was not clear from our side. Please specify when you are talking about a package because I just catch that you were talking about the NetworkManager-branding-SLE package and there is no such thing as ?EWE?, but SLE WE which stand for SUSE Linux Enterprise Workstation Extension. Regards, -- Vincent Moutoussamy SUSE Beta Program and SDK Project Manager Software AG ? Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany ? Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com