[Deepsea-users] Error during Stage 3 (deploy) of DeepSea

[LOIC DEVULDER]

Yes, it's the firewall that causes problem. Now all works well :-)

I configured the firewall to authorize salt, but it's seems that the "salt" service is not known on the minions.
This is because the service declaration is in the salt-master package. I will try to manually add the port in the /etc/sysconfig/SuSEfirewall2 file.

I only have a few problem with ntp: I will open a new thread for this little issue.

Regards / Cordialement,
___________________________________________________________________
PSA Groupe
Loïc Devulder (loic.devulder at mpsa.com)
Senior Linux System Engineer / Linux HPC Specialist
DF/DDCE/ISTA/DSEP/ULES - Linux Team
BESSONCOURT / EXTENSION RIVE DROITE / B19
Internal postal address: SX.BES.15
Phone Incident - Level 3: 22 94 39
Phone Incident - Level 4: 22 92 40
Office: +33 (0)9 66 66 69 06 (27 69 06)
Mobile: +33 (0)6 87 72 47 31
___________________________________________________________________

This message may contain confidential information. If you are not the intended recipient, please advise the sender immediately and delete this message. For further information on confidentiality and the risks inherent in electronic communication see http://disclaimer.psa-peugeot-citroen.com.


> -----Message d'origine-----
> De : deepsea-users-bounces at lists.suse.com [mailto:deepsea-users-
> bounces at lists.suse.com] De la part de Joshua Schmid
> Envoyé : vendredi 20 janvier 2017 15:16
> À : deepsea-users at lists.suse.com
> Objet : Re: [Deepsea-users] Error during Stage 3 (deploy) of DeepSea
> 
> >>> Real sender address / Reelle adresse d expedition :
> >>> deepsea-users-bounces at lists.suse.com <<<
> 
> **********************************************************************
> 
> 
> On 01/20/2017 02:55 PM, LOIC DEVULDER wrote:
> > Hi Joshua,
> >
> > Thanks for your help: after reading you explanation I found that
> > finally I didn't read the documentation correctly :-( I missed to put
> the stack directory of the hardware profiles in the policy.cfg file and so
> the disks informations were missing.
> >
> > Now it's better, all parts are valided. But I run into another issue:
> > ylal8020:~ # salt-run state.orch ceph.stage.deploy [WARNING ] Although
> > 'dmidecode' was found in path, the current user cannot execute it.
> Grains output might not be accurate.
> > [WARNING ] Although 'dmidecode' was found in path, the current user
> cannot execute it. Grains output might not be accurate.
> > [WARNING ] Although 'dmidecode' was found in path, the current user
> cannot execute it. Grains output might not be accurate.
> > firewall                 : ['enabled on minion ylal8300.inetpsa.com',
> 'enabled on minion ylxl0080.inetpsa.com', 'enabled on minion
> ylxl0050.inetpsa.com', 'enabled on minion ylal8020.inetpsa.com', 'enabled
> on minion ylal8290.inetpsa.com', 'enabled on minion ylxl0060.inetpsa.com',
> 'enabled on minion ylxl0070.inetpsa.com', 'enabled on minion
> ylal8030.inetpsa.com']
> > [WARNING ] Although 'dmidecode' was found in path, the current user
> cannot execute it. Grains output might not be accurate.
> > fsid                     : valid
> > public_network           : valid
> > public_interface         : valid
> > cluster_network          : valid
> > cluster_interface        : valid
> > monitors                 : valid
> > storage                  : valid
> > master_role              : valid
> > mon_host                 : valid
> > mon_initial_members      : valid
> > time_server              : valid
> > fqdn                     : valid
> > [ERROR   ] No highstate or sls specified, no execution made
> > ylal8020.inetpsa.com_master:
> > ----------
> >           ID: ready check failed
> >     Function: salt.state
> >         Name: Fail on Warning is True
> >       Result: False
> >      Comment: No highstate or sls specified, no execution made
> >      Started: 14:48:20.293455
> >     Duration: 0.967 ms
> >      Changes:
> >
> > Summary for ylal8020.inetpsa.com_master
> > ------------
> > Succeeded: 0
> > Failed:    1
> > ------------
> > Total states run:     1
> > Total run time:   0.967 ms
> >
> > I'm reading the documentation again to see where I failed :-)
> 
> The last piece you are missing is `firewall`.
> The error message is a bit shadowed due to the cluttered logs. As Eric
> mentioned in you other mail:
> 
> salt-run -l error state.orch ceph.stage.configure
> 
>   because INFO includes WARNING which is why you only received additional
> messages.  BTW, these levels are listed in /etc/salt/master with
> log_level.
> 
> 
> try to disable the firewall with:
> 
> utilizing salt -> salt "*" cmd.run "systemctl stop SuSEfirewall2"
> 
> hth
> 
> 
> --
> Freundliche Grüße - Kind regards,
> Joshua Schmid
> SUSE Enterprise Storage
> SUSE Linux GmbH - Maxfeldstr. 5 - 90409 Nürnberg
> --------------------------------------------------------------------------
> ------------------------------------------
> SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Jennifer Guild,
> Dilip Upmanyu, Graham Norton, HRB 21284 (AG Nürnberg)
> --------------------------------------------------------------------------
> ------------------------------------------
> _______________________________________________
> Deepsea-users mailing list
> Deepsea-users at lists.suse.com
> http://lists.suse.com/mailman/listinfo/deepsea-users