[sle-beta] SLE-Beta SLES12-SP3 Beta Migration - S390x
Vincent Moutoussamy
vmoutoussamy at suse.com
Thu May 18 09:27:31 MDT 2017
Hi,
This should now work with Beta 3.
But please remember that updating/upgrading/migrating from Beta version to Beta
version is not supported!
This should work but we highly recommend to do a fresh install of your server.
_However_ upgrading/migrating from SLE 12 SP2 to SLE 12 SP3 BetaX is “supported”
in a sense that in this specific scenario we can consider the SLE 12 SP3 BetaX
as SLE 12 SP3. Thus any findings or bugs could be considered as a bug that could
occur with the final version of SLE 12 SP3.
Hope you understand,
Regards,
--
Vincent Moutoussamy
SUSE Beta Program and SDK Project Manager
> On 15 May 2017, at 16:39, Waite, Dick (External) <Dick.Waite at softwareag.com> wrote:
>
> Ummmm seems it's not just +ve wave thoughts...
>
> On DALI157 I checked the status, Beta-1
>
> I then tried a DUP and was told no work needed...
>
> I then tried a migration --query
>
> I was told no migration available or simular...
>
> I then tried a DUP and glory be.... Off we went to update to pre-Beta-3
>
> I did try the with DALI158 and got the same...
>
> So it seem a MIGRATION rattles the bits and bit and then a DUP finds it does have some work...
>
> What a grand afternoon, all I have to do tomorrow is a few IPL's
>
> Bye
>
> __R
>
> From: Waite, Dick (External)
> Sent: 15 May 2017 15:16
> To: sle-beta at lists.suse.com <mailto:sle-beta at lists.suse.com>
> Subject: RE: SLE-Beta SLES12-SP3 Beta Migration - S390x
>
> Grand Sunny Monday,
>
> What a difference some sunshine makes. Yesterday I tried to DUP update a SP-3 Beta-1 s390x machine and it said "nothing to do"
>
> Today we have sun, and I thought, let's try again with all this +ve wave thoughts...
>
> There are some running programs that might use files deleted by recent upgrade. You may wish to check and restart some of them. Run 'zypper ps -s' to list these programs.
> dali111:~ # cat /etc/issue
>
> Welcome to SUSE Linux Enterprise Server 12 SP3 Beta3 (s390x) - Kernel \r (\l).
>
> To quote from a grand film:
>
>
> Always with the negative waves Moriarty, ALWAYS with the negative waves!
> Oh, man. Don't hit me with those negative waves so early in the morning.
> So with a little sunshine and +ve wave thoughts our DAL111 has gone from SP-3 Beta-1 to a pre-Beta-3.
>
> Who says computing is not a little magic....
>
> Bye Y'all
>
> __R
>
> From: Waite, Dick (External)
> Sent: 14 May 2017 07:50
> To: sle-beta at lists.suse.com <mailto:sle-beta at lists.suse.com>
> Subject: FW: SLE-Beta SLES12-SP3 Beta Migration - S390x
>
> Grand Sunday,
>
> We had a maint slot on the IBM M/F yesterday. My dali's were newly ipl'ed so I thought, lets give one a try, I can fix it on Tuesday if has a real bad hair day.
>
> So the log follows:
>
> I think it went quite well. DALI111 is running SLES12 SP-3 at Beta-1. I ran the DUP and it's reply was:
>
> Nothing to do.
>
> An honest machine, it's running Okay but why doesn't it update to at least Beta-2 ?
>
> Have a very good day Y'all
>
> __R
>
>
>
>
>
>
>
> login as: root
> +--------------------------------------------------------------------+
> ¦ • MobaXterm 9.4 • ¦
> ¦ (SSH client, X-server and networking tools) ¦
> ¦ ¦
> ¦ ? SSH session to root at dali111.eur.ad.sag <mailto:root at dali111.eur.ad.sag> ¦
> ¦ • SSH compression : ? ¦
> ¦ • SSH-browser : ? ¦
> ¦ • X11-forwarding : ? (remote display is forwarded through SSH) ¦
> ¦ • DISPLAY : ? (automatically set on remote server) ¦
> ¦ ¦
> ¦ ? For more info, ctrl+click on help or visit our website ¦
> +--------------------------------------------------------------------+
>
> Last login: Wed May 10 16:16:45 2017 from 10.20.200.118
> /SAG/specific.login: No such file or directory.
> root has logged on pts/0 from 10.20.252.37.
> dali111::root 51 => bash
> dali111:~ # SUSEConnect --status-text
> Installed Products:
> ------------------------------------------
>
> Toolchain Module
> (sle-module-toolchain/12/s390x)
>
> Registered
>
> ------------------------------------------
>
> SUSE Linux Enterprise Software Development Kit 12
> (sle-sdk/12.3/s390x)
>
> Registered
>
> ------------------------------------------
>
> Web and Scripting Module
> (sle-module-web-scripting/12/s390x)
>
> Registered
>
> ------------------------------------------
>
> SUSE Linux Enterprise Server 12 SP3
> (SLES/12.3/s390x)
>
> Registered
>
> Subscription:
>
> Regcode: 04bff...........
> Starts at: 2017-04-29 06:01:23 UTC
> Expires at: 2017-10-26 06:01:23 UTC
> Status: ACTIVE
> Type: test
>
>
> ------------------------------------------
>
> Legacy Module
> (sle-module-legacy/12/s390x)
>
> Registered
>
> ------------------------------------------
>
> dali111:~ # cat /etc/issue
>
> Welcome to SUSE Linux Enterprise Server 12 SP3 Beta1 (s390x) - Kernel \r (\l).
>
>
> dali111:~ # zypper lp
> Refreshing service 'Legacy_Module_12_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Server_12_SP3_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x'.
> Refreshing service 'Toolchain_Module_12_s390x'.
> Refreshing service 'Web_and_Scripting_Module_12_s390x'.
> Retrieving repository 'SLES12-SP3-Updates' metadata .....................................................................................................................................................[done]
> Building repository 'SLES12-SP3-Updates' cache ..........................................................................................................................................................[done]
> Retrieving repository 'SLE-SDK12-SP3-Updates' metadata ..................................................................................................................................................[done]
> Building repository 'SLE-SDK12-SP3-Updates' cache .......................................................................................................................................................[done]
> Loading repository data...
> Reading installed packages...
>
> Repository | Name | Category | Severity | Interactive | Status | Summary
> -------------------+---------------------------------+-------------+----------+-------------+--------+------------------------------
> SLES12-SP3-Updates | SUSE-SLE-SERVER-12-SP3-2017-734 | recommended | low | --- | needed | Recommended update for hwinfo
>
> Found 1 applicable patch:
> 1 patch needed (0 security patches)
>
> dali111:~ # zypper patch
> Refreshing service 'Legacy_Module_12_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Server_12_SP3_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x'.
> Refreshing service 'Toolchain_Module_12_s390x'.
> Refreshing service 'Web_and_Scripting_Module_12_s390x'.
> Loading repository data...
> Reading installed packages...
> Resolving package dependencies...
>
> The following NEW patch is going to be installed:
> SUSE-SLE-SERVER-12-SP3-2017-734
>
> The following package is going to be upgraded:
> hwinfo
>
> 1 package to upgrade.
> Overall download size: 615.9 KiB. Already cached: 0 B. After the operation, additional 27.2 KiB will be used.
> Continue? [y/n/...? shows all options] (y):
> Retrieving package hwinfo-21.44-3.1.s390x (1/1), 615.9 KiB ( 2.7 MiB unpacked)
> Retrieving: hwinfo-21.44-3.1.s390x.rpm ....................................................................................................................................................[done (288.0 KiB/s)]
> Checking for file conflicts: ............................................................................................................................................................................[done]
> (1/1) Installing: hwinfo-21.44-3.1.s390x ................................................................................................................................................................[done]
> dali111:~ # zypper lp
> Refreshing service 'Legacy_Module_12_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Server_12_SP3_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x'.
> Refreshing service 'Toolchain_Module_12_s390x'.
> Refreshing service 'Web_and_Scripting_Module_12_s390x'.
> Loading repository data...
> Reading installed packages...
> No updates found.
>
> dali111:~ # zypper ls
> # | Alias | Name | Enabled | GPG Check | Refresh | Type
> --+-------------------------------------------------------------+-------------------------------------------------------------+---------+-----------+---------+------
> 1 | Legacy_Module_12_s390x | Legacy_Module_12_s390x | Yes | ---- | Yes | ris
> 2 | SUSE_Linux_Enterprise_Server_12_SP3_s390x | SUSE_Linux_Enterprise_Server_12_SP3_s390x | Yes | ---- | Yes | ris
> 3 | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x | Yes | ---- | Yes | ris
> 4 | Toolchain_Module_12_s390x | Toolchain_Module_12_s390x | Yes | ---- | Yes | ris
> 5 | Web_and_Scripting_Module_12_s390x | Web_and_Scripting_Module_12_s390x | Yes | ---- | Yes | ris
> 6 | SLES12-SP1-12.1-0 | SLES12-SP1-12.1-0 | No | ---- | ---- | yast2
> dali111:~ # zypper lr
> Repository priorities are without effect. All enabled repositories share the same priority.
>
> # | Alias | Name | Enabled | GPG Check | Refresh
> ---+---------------------------------------------------------------------------------------------+----------------------------------------------+---------+-----------+--------
> 1 | Legacy_Module_12_s390x:SLE-Module-Legacy12-Debuginfo-Pool | SLE-Module-Legacy12-Debuginfo-Pool | No | ---- | ----
> 2 | Legacy_Module_12_s390x:SLE-Module-Legacy12-Debuginfo-Updates | SLE-Module-Legacy12-Debuginfo-Updates | No | ---- | ----
> 3 | Legacy_Module_12_s390x:SLE-Module-Legacy12-Pool | SLE-Module-Legacy12-Pool | Yes | (r ) Yes | No
> 4 | Legacy_Module_12_s390x:SLE-Module-Legacy12-Source-Pool | SLE-Module-Legacy12-Source-Pool | No | ---- | ----
> 5 | Legacy_Module_12_s390x:SLE-Module-Legacy12-Updates | SLE-Module-Legacy12-Updates | Yes | (r ) Yes | Yes
> 6 | SLES12-SP1-12.1-0 | SLES12-SP1-12.1-0 | No | ---- | ----
> 7 | SUSE_Linux_Enterprise_Server_12_SP3_s390x:SLES12-SP3-Debuginfo-Pool | SLES12-SP3-Debuginfo-Pool | No | ---- | ----
> 8 | SUSE_Linux_Enterprise_Server_12_SP3_s390x:SLES12-SP3-Debuginfo-Updates | SLES12-SP3-Debuginfo-Updates | No | ---- | ----
> 9 | SUSE_Linux_Enterprise_Server_12_SP3_s390x:SLES12-SP3-Pool | SLES12-SP3-Pool | Yes | (r ) Yes | No
> 10 | SUSE_Linux_Enterprise_Server_12_SP3_s390x:SLES12-SP3-Source-Pool | SLES12-SP3-Source-Pool | No | ---- | ----
> 11 | SUSE_Linux_Enterprise_Server_12_SP3_s390x:SLES12-SP3-Updates | SLES12-SP3-Updates | Yes | (r ) Yes | Yes
> 12 | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x:SLE-SDK12-SP3-Debuginfo-Pool | SLE-SDK12-SP3-Debuginfo-Pool | No | ---- | ----
> 13 | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x:SLE-SDK12-SP3-Debuginfo-Updates | SLE-SDK12-SP3-Debuginfo-Updates | No | ---- | ----
> 14 | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x:SLE-SDK12-SP3-Pool | SLE-SDK12-SP3-Pool | Yes | (r ) Yes | No
> 15 | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x:SLE-SDK12-SP3-Source-Pool | SLE-SDK12-SP3-Source-Pool | No | ---- | ----
> 16 | SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x:SLE-SDK12-SP3-Updates | SLE-SDK12-SP3-Updates | Yes | (r ) Yes | Yes
> 17 | Toolchain_Module_12_s390x:SLE-Module-Toolchain12-Debuginfo-Pool | SLE-Module-Toolchain12-Debuginfo-Pool | No | ---- | ----
> 18 | Toolchain_Module_12_s390x:SLE-Module-Toolchain12-Debuginfo-Updates | SLE-Module-Toolchain12-Debuginfo-Updates | No | ---- | ----
> 19 | Toolchain_Module_12_s390x:SLE-Module-Toolchain12-Pool | SLE-Module-Toolchain12-Pool | Yes | (r ) Yes | No
> 20 | Toolchain_Module_12_s390x:SLE-Module-Toolchain12-Updates | SLE-Module-Toolchain12-Updates | Yes | (r ) Yes | Yes
> 21 | Web_and_Scripting_Module_12_s390x:SLE-Module-Web-Scripting12-Debuginfo-Pool | SLE-Module-Web-Scripting12-Debuginfo-Pool | No | ---- | ----
> 22 | Web_and_Scripting_Module_12_s390x:SLE-Module-Web-Scripting12-Debuginfo-Updates | SLE-Module-Web-Scripting12-Debuginfo-Updates | No | ---- | ----
> 23 | Web_and_Scripting_Module_12_s390x:SLE-Module-Web-Scripting12-Pool | SLE-Module-Web-Scripting12-Pool | Yes | (r ) Yes | No
> 24 | Web_and_Scripting_Module_12_s390x:SLE-Module-Web-Scripting12-Source-Pool | SLE-Module-Web-Scripting12-Source-Pool | No | ---- | ----
> 25 | Web_and_Scripting_Module_12_s390x:SLE-Module-Web-Scripting12-Updates | SLE-Module-Web-Scripting12-Updates | Yes | (r ) Yes | Yes
> dali111:~ # zypper dup --help
> dist-upgrade (dup) [options]
>
> Perform a distribution upgrade.
>
> Command options:
>
> --from <alias|#|URI> Restrict upgrade to specified repository.
> -r, --repo <alias|#|URI> Load only the specified repository.
> -l, --auto-agree-with-licenses
> Automatically say 'yes' to third party license
> confirmation prompt.
> See man zypper for more details.
> --debug-solver Create solver test case for debugging
> --no-recommends Do not install recommended packages, only required.
> --recommends Install also recommended packages in addition
> to the required.
> --replacefiles Install the packages even if they replace files from other,
> already installed, packages. Default is to treat file conflicts
> as an error. --download-as-needed disables the fileconflict check.
> -D, --dry-run Test the upgrade, do not actually upgrade
> --details Show the detailed installation summary.
> --download Set the download-install mode. Available modes:
> only, in-advance, in-heaps, as-needed
> -d, --download-only Only download the packages, do not install.
> -y, --no-confirm Don't require user interaction. Alias for the --non-interactive global option.
>
> Expert options:
>
> --allow-downgrade
> --no-allow-downgrade Whether to allow downgrading installed resolvables.
> --allow-name-change
> --no-allow-name-change Whether to allow changing the names of installed resolvables.
> --allow-arch-change
> --no-allow-arch-change Whether to allow changing the architecture of installed resolvables.
> --allow-vendor-change
> --no-allow-vendor-change
> Whether to allow changing the vendor of installed resolvables.
>
> dali111:~ # zypper dup --details --auto-agree-with-licenses
> Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command.
> Refreshing service 'Legacy_Module_12_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Server_12_SP3_s390x'.
> Refreshing service 'SUSE_Linux_Enterprise_Software_Development_Kit_12_SP3_s390x'.
> Refreshing service 'Toolchain_Module_12_s390x'.
> Refreshing service 'Web_and_Scripting_Module_12_s390x'.
> Loading repository data...
> Reading installed packages...
> Computing distribution upgrade...
>
> Nothing to do.
> dali111:~ # cat /etc/issue
>
> Welcome to SUSE Linux Enterprise Server 12 SP3 Beta1 (s390x) - Kernel \r (\l).
>
>
> dali111:~ #
>
>
> Software AG – Sitz/Registered office: Uhlandstraße 12, 64297 Darmstadt, Germany – Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt, Dr. Stefan Sigg; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com <http://www.softwareag.com/><MobaXterm_root at dali157_20170515_163054.txt>_______________________________________________
> sle-beta mailing list
> sle-beta at lists.suse.com <mailto:sle-beta at lists.suse.com>
> http://lists.suse.com/mailman/listinfo/sle-beta <http://lists.suse.com/mailman/listinfo/sle-beta>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.suse.com/pipermail/sle-beta/attachments/20170518/4a243c1b/attachment.htm>
More information about the sle-beta
mailing list