SUSE-SU-2018:2223-1: important: Security update for the Linux Kernel
sle-security-updates at lists.suse.com
sle-security-updates at lists.suse.com
Mon Aug 6 16:31:35 MDT 2018
SUSE Security Update: Security update for the Linux Kernel
______________________________________________________________________________
Announcement ID: SUSE-SU-2018:2223-1
Rating: important
References: #1012382 #1037697 #1046299 #1046300 #1046302
#1046303 #1046305 #1046306 #1046307 #1046533
#1046543 #1050242 #1050536 #1050538 #1050540
#1051510 #1054245 #1056651 #1056787 #1058169
#1058659 #1060463 #1068032 #1075087 #1075360
#1077338 #1077761 #1077989 #1085042 #1085536
#1085539 #1086301 #1086313 #1086314 #1086324
#1086457 #1087092 #1087202 #1087217 #1087233
#1090098 #1090888 #1091041 #1091171 #1093148
#1093666 #1094119 #1096330 #1097583 #1097584
#1097585 #1097586 #1097587 #1097588 #1098633
#1099193 #1100132 #1100884 #1101143 #1101337
#1101352 #1101564 #1101669 #1101674 #1101789
#1101813 #1101816 #1102088 #1102097 #1102147
#1102340 #1102512 #1102851 #1103216 #1103220
#1103230 #1103421
Cross-References: CVE-2017-18344 CVE-2018-5390
Affected Products:
SUSE Linux Enterprise Workstation Extension 15
SUSE Linux Enterprise Module for Live Patching 15
SUSE Linux Enterprise Module for Legacy Software 15
SUSE Linux Enterprise Module for Development Tools 15
SUSE Linux Enterprise Module for Basesystem 15
SUSE Linux Enterprise High Availability 15
______________________________________________________________________________
An update that solves two vulnerabilities and has 75 fixes
is now available.
Description:
The SUSE Linux Enterprise 15 kernel was updated to receive various
security and bugfixes.
The following security bugs were fixed:
CVE-2018-5390 aka SegmentSmack: A remote attacker even with relatively low
bandwidth could have caused lots of CPU usage by triggering the worst case
scenario during IP and/or TCP fragment reassembly (bsc#1102340)
CVE-2017-18344: The timer_create syscall implementation didn't properly
validate input, which could have lead to out-of-bounds access. This
allowed userspace applications to read arbitrary kernel memory in some
setups. (bsc#1102851)
The following non-security bugs were fixed:
- acpi, apei, einj: Subtract any matching Register Region from Trigger
resources (bsc#1051510).
- acpi, nfit: Fix scrub idle detection (bsc#1094119).
- acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value
(bsc#1051510).
- acpi/processor: Finish making acpi_processor_ppc_has_changed() void
(bsc#1051510).
- ahci: Disable Lpm on Lenovo 50 series laptops with a too old BIOS
(bsc#1051510).
- alsa: hda - Handle pm failure during hotplug (bsc#1051510).
- alsa: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk
(bsc#1051510).
- alsa: hda/realtek - Yet another Clevo P950 quirk entry (bsc#1101143).
- alsa: hda/realtek - two more lenovo models need fixup of MIC_LOCATION
(bsc#1051510).
- alsa: hda: add mute led support for HP ProBook 455 G5 (bsc#1051510).
- alsa: rawmidi: Change resized buffers atomically (bsc#1051510).
- alx: take rtnl before calling __alx_open from resume (bsc#1051510).
- arm64: kpti: Use early_param for kpti= command-line option (bsc#1103220).
- arm: module: fix modsign build error (bsc#1093666).
- asoc: mediatek: preallocate pages use platform device (bsc#1051510).
- ath9k_htc: Add a sanity check in ath9k_htc_ampdu_action() (bsc#1051510).
- atl1c: reserve min skb headroom (bsc#1051510).
- audit: Fix wrong task in comparison of session ID (bsc#1051510).
- audit: ensure that 'audit=1' actually enables audit for PID 1
(bsc#1051510).
- audit: return on memory error to avoid null pointer dereference
(bsc#1051510).
- b44: Initialize 64-bit stats seqcount (bsc#1051510).
- backlight: as3711_bl: Fix Device Tree node leaks (bsc#1051510).
- backlight: lm3630a: Bump REG_MAX value to 0x50 instead of 0x1F
(bsc#1051510).
- batman-adv: Accept only filled wifi station info (bsc#1051510).
- batman-adv: Always initialize fragment header priority (bsc#1051510).
- batman-adv: Avoid race in TT TVLV allocator helper (bsc#1051510).
- batman-adv: Avoid storing non-TT-sync flags on singular entries too
(bsc#1051510).
- batman-adv: Fix TT sync flags for intermediate TT responses
(bsc#1051510).
- batman-adv: Fix bat_ogm_iv best gw refcnt after netlink dump
(bsc#1051510).
- batman-adv: Fix bat_v best gw refcnt after netlink dump (bsc#1051510).
- batman-adv: Fix check of retrieved orig_gw in batadv_v_gw_is_eligible
(bsc#1051510).
- batman-adv: Fix debugfs path for renamed hardif (bsc#1051510).
- batman-adv: Fix debugfs path for renamed softif (bsc#1051510).
- batman-adv: Fix internal interface indices types (bsc#1051510).
- batman-adv: Fix lock for ogm cnt access in batadv_iv_ogm_calc_tq
(bsc#1051510).
- batman-adv: Fix multicast packet loss with a single WANT_ALL_IPV4/6 flag
(bsc#1051510).
- batman-adv: Fix netlink dumping of BLA backbones (bsc#1051510).
- batman-adv: Fix netlink dumping of BLA claims (bsc#1051510).
- batman-adv: Fix skbuff rcsum on packet reroute (bsc#1051510).
- batman-adv: Ignore invalid batadv_iv_gw during netlink send
(bsc#1051510).
- batman-adv: Ignore invalid batadv_v_gw during netlink send (bsc#1051510).
- batman-adv: Use default throughput value on cfg80211 error (bsc#1051510).
- batman-adv: fix TT sync flag inconsistencies (bsc#1051510).
- batman-adv: fix header size check in batadv_dbg_arp() (bsc#1051510).
- batman-adv: fix multicast-via-unicast transmission with AP isolation
(bsc#1051510).
- batman-adv: fix packet checksum in receive path (bsc#1051510).
- batman-adv: fix packet loss for broadcasted DHCP packets to a server
(bsc#1051510).
- batman-adv: invalidate checksum on fragment reassembly (bsc#1051510).
- batman-adv: update data pointers after skb_cow() (bsc#1051510).
- blk-mq: count allocated but not started requests in iostats inflight
(bsc#1077989).
- blk-mq: fix sysfs inflight counter (bsc#1077989).
- block: always set partition number to '0' in blk_partition_remap()
(bsc#1054245).
- block: always set partition number to '0' in blk_partition_remap()
(bsc#1077989).
- block: bio_check_eod() needs to consider partitions (bsc#1077989).
- block: fail op_is_write() requests to read-only partitions (bsc#1077989).
- block: pass 'run_queue' to blk_mq_request_bypass_insert (bsc#1077989).
- block: set request_list for request (bsc#1077989).
- bluetooth: avoid recursive locking in hci_send_to_channel()
(bsc#1051510).
- bluetooth: hci_ll: Add support for the external clock (bsc#1051510).
- bluetooth: hci_ll: Fix download_firmware() return when __hci_cmd_sync
fails (bsc#1051510).
- bluetooth: hci_nokia: select BT_HCIUART_H4 (bsc#1051510).
- bluetooth: hci_uart: fix kconfig dependency (bsc#1051510).
- bnxt_en: Always set output parameters in bnxt_get_max_rings()
(bsc#1050242).
- bnxt_en: Always set output parameters in bnxt_get_max_rings()
(bsc#1050242).
- bnxt_en: Do not modify max IRQ count after rdma driver requests/frees
IRQs (bsc#1050242).
- bnxt_en: Do not modify max IRQ count after rdma driver requests/frees
IRQs (bsc#1050242).
- bnxt_en: Fix for system hang if request_irq fails (bsc#1050242).
- bnxt_en: Fix for system hang if request_irq fails (bsc#1050242).
- bnxt_en: Fix inconsistent BNXT_FLAG_AGG_RINGS logic (bsc#1050242).
- bnxt_en: Fix inconsistent BNXT_FLAG_AGG_RINGS logic (bsc#1050242).
- bnxt_en: Fix the vlan_tci exact match check (bsc#1050242).
- bnxt_en: Fix the vlan_tci exact match check (bsc#1050242).
- bonding: re-evaluate force_primary when the primary slave name changes
(networking-stable-18_06_20).
- btrfs: Do not remove block group still has pinned down bytes
(bsc#1086457).
- bus: arm-cci: Fix use of smp_processor_id() in preemptible context
(bsc#1051510).
- bus: arm-ccn: Check memory allocation failure (bsc#1051510).
- bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
(bsc#1051510).
- bus: arm-ccn: fix module unloading Error: Removing state 147 which has
instances left (bsc#1051510).
- can: bcm: check for null sk before deferencing it via the call to
sock_net (bsc#1051510).
- can: m_can.c: fix setup of CCCR register: clear CCCR NISO bit before
checking can.ctrlmode (bsc#1051510).
- can: mpc5xxx_can: check of_iomap return before use (bsc#1051510).
- can: peak_canfd: fix firmware v3.3.0: limit allocation to 32-bit DMA
addr only (bsc#1051510).
- can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK
(bsc#1051510).
- can: xilinx_can: fix RX overflow interrupt not being enabled
(bsc#1051510).
- can: xilinx_can: fix device dropping off bus on RX overrun (bsc#1051510).
- can: xilinx_can: fix incorrect clear of non-processed interrupts
(bsc#1051510).
- can: xilinx_can: fix power management handling (bsc#1051510).
- can: xilinx_can: fix recovery from error states not being propagated
(bsc#1051510).
- can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
(bsc#1051510).
- cdc_ncm: avoid padding beyond end of skb (networking-stable-18_06_20).
- cfg80211: initialize sinfo in cfg80211_get_station (bsc#1051510).
- checkpatch: add 6 missing types to --list-types (bsc#1051510).
- cifs: Fix infinite loop when using hard mount option (bsc#1091171).
- cifs: do not allow creating sockets except with SMB1 posix exensions
(bsc#1102097).
- clk: Do not show the incorrect clock phase (bsc#1051510).
- clk: Do not write error code into divider register (bsc#1051510).
- clk: Fix __set_clk_rates error print-string (bsc#1051510).
- clk: at91: PLL recalc_rate() now using cached MUL and DIV values
(bsc#1051510).
- clk: at91: fix clk-generated parenting (bsc#1051510).
- clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()
(bsc#1051510).
- clk: bcm2835: De-assert/assert PLL reset signal when appropriate
(bsc#1051510).
- clk: fix false-positive Wmaybe-uninitialized warning (bsc#1051510).
- clk: fix mux clock documentation (bsc#1051510).
- clk: fix set_rate_range when current rate is out of range (bsc#1051510).
- clk: hi3660: fix incorrect uart3 clock freqency (bsc#1051510).
- clk: hi6220: change watchdog clock source (bsc#1051510).
- clk: hi6220: mark clock cs_atb_syspll as critical (bsc#1051510).
- clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()
(bsc#1051510).
- clk: hisilicon: mark wdt_mux_p[] as const (bsc#1051510).
- clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux (bsc#1051510).
- clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o
VPU (bsc#1051510).
- clk: imx7d: fix mipi dphy div parent (bsc#1051510).
- clk: mediatek: add the option for determining PLL source clock
(bsc#1051510).
- clk: mediatek: mark mtk_infrasys_init_early __init (bsc#1051510).
- clk: meson: gxbb: fix clk_mclk_i958 divider flags (bsc#1051510).
- clk: meson: gxbb: fix meson cts_amclk divider flags (bsc#1051510).
- clk: meson: gxbb: fix wrong clock for SARADC/SANA (bsc#1051510).
- clk: meson: meson8b: fix protection against undefined clks (bsc#1051510).
- clk: meson: mpll: fix mpll0 fractional part ignored (bsc#1051510).
- clk: meson: mpll: use 64-bit maths in params_from_rate (bsc#1051510).
- clk: meson: remove unnecessary rounding in the pll clock (bsc#1051510).
- clk: mvebu: use correct bit for 98DX3236 NAND (bsc#1051510).
- clk: qcom: Base rcg parent rate off plan frequency (bsc#1051510).
- clk: qcom: clk-smd-rpm: Fix the reported rate of branches (bsc#1051510).
- clk: qcom: common: fix legacy board-clock registration (bsc#1051510).
- clk: qcom: msm8916: Fix bimc gpu clock ops (bsc#1051510).
- clk: qcom: msm8916: fix mnd_width for codec_digcodec (bsc#1051510).
- clk: renesas: div6: Document fields used for parent selection
(bsc#1051510).
- clk: renesas: r8a7745: Remove PLL configs for MD19=0 (bsc#1051510).
- clk: renesas: r8a7745: Remove nonexisting scu-src[0789] clocks
(bsc#1051510).
- clk: renesas: r8a7795: Correct pwm, gpio, and i2c parent clocks on ES2.0
(bsc#1051510).
- clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 (bsc#1051510).
- clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
(bsc#1051510).
- clk: rockchip: Prevent calculating mmc phase if clock rate is zero
(bsc#1051510).
- clk: samsung: Fix m2m scaler clock on Exynos542x (bsc#1051510).
- clk: samsung: exynos3250: Fix PLL rates (bsc#1051510).
- clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU
devices (bsc#1051510).
- clk: samsung: exynos5250: Fix PLL rates (bsc#1051510).
- clk: samsung: exynos5260: Fix PLL rates (bsc#1051510).
- clk: samsung: exynos5433: Fix PLL rates (bsc#1051510).
- clk: samsung: exynos7: Fix PLL rates (bsc#1051510).
- clk: samsung: s3c2410: Fix PLL rates (bsc#1051510).
- clk: scpi: error when clock fails to register (bsc#1051510).
- clk: scpi: fix return type of __scpi_dvfs_round_rate (bsc#1051510).
- clk: si5351: Rename internal plls to avoid name collisions (bsc#1051510).
- clk: si5351: fix PLL reset (bsc#1051510).
- clk: socfpga: Fix the smplsel on Arria10 and Stratix10 (bsc#1051510).
- clk: sunxi-ng: Fix fractional mode for N-M clocks (bsc#1051510).
- clk: sunxi-ng: Make fractional helper less chatty (bsc#1051510).
- clk: sunxi-ng: Wait for lock when using fractional mode (bsc#1051510).
- clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops (bsc#1051510).
- clk: sunxi-ng: add CLK_SET_RATE_PARENT flag to H3 GPU clock
(bsc#1051510).
- clk: sunxi-ng: add CLK_SET_RATE_UNGATE to all H3 PLLs (bsc#1051510).
- clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3
(bsc#1051510).
- clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change
(bsc#1051510).
- clk: sunxi-ng: multiplier: Fix fractional mode (bsc#1051510).
- clk: sunxi-ng: nm: Check if requested rate is supported by fractional
clock (bsc#1051510).
- clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-divider
(bsc#1051510).
- clk: sunxi-ng: sun6i: Export video PLLs (bsc#1051510).
- clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision
(bsc#1051510).
- clk: sunxi: fix build warning (bsc#1051510).
- clk: sunxi: fix uninitialized access (bsc#1051510).
- clk: tegra: Fix cclk_lp divisor register (bsc#1051510).
- clk: tegra: Fix pll_u rate configuration (bsc#1051510).
- clk: tegra: Use readl_relaxed_poll_timeout_atomic() in
tegra210_clock_init() (bsc#1051510).
- clk: ti: dra7-atl-clock: fix child-node lookups (bsc#1051510).
- clk: uniphier: fix DAPLL2 clock rate of Pro5 (bsc#1051510).
- clk: x86: Do not gate clocks enabled by the firmware (bsc#1051510).
- clockevents/drivers/cs5535: Improve resilience to spurious interrupts
(bsc#1051510).
- clocksource/drivers/stm32: Fix kernel panic with multiple timers
(bsc#1051510).
- cnic: Fix an error handling path in 'cnic_alloc_bnx2x_resc()'
(bsc#1086324).
- cnic: Fix an error handling path in 'cnic_alloc_bnx2x_resc()'
(bsc#1086324).
- cpufreq: CPPC: Initialize shared perf capabilities of CPUs (bsc#1100884).
- cpufreq: Fix new policy initialization during limits updates via sysfs
(bsc#1100884).
- cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path
(bsc#1100884).
- cpufreq: docs: Add missing cpuinfo_cur_freq description (bsc#1051510).
- cpufreq: docs: Drop intel-pstate.txt from index.txt (bsc#1051510).
- cpufreq: governors: Fix long idle detection logic in load calculation
(bsc#1100884).
- cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer
interrupt (bsc#1100884).
- cpuidle: powernv: Fix promotion from snooze if next state disabled
(bsc#1100884).
- crash_dump: is_kdump_kernel can be boolean (bsc#1103230).
- crypto: caam/qi - explicitly set dma_ops (bsc#1051510).
- crypto: ccp - remove unused variable qim (bsc#1051510).
- crypto: change transient busy return code to -ENOSPC (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Add authenc versions of ctr and sha (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Check error code with IS_ERR macro (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Fix IV updated in XTS operation (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Fix Indentation (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Fix an error code in chcr_hash_dma_map() (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Fix indentation warning (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Fix iv passed in fallback path for rfc3686
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- crypto: chelsio - Fix src buffer dma length (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Make function aead_ccm_validate_input static
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driver
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- crypto: chelsio - Remove allocation of sg list to implement 2K limit of
dsgl header (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- crypto: chelsio - Remove dst sg size zero check (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Remove unused parameter (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Update IV before sending request to HW (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - Use kernel round function to align lengths
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- crypto: chelsio - Use x8_ble gf multiplication to calculate IV
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- crypto: chelsio - check for sg null (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: chelsio - do not leak pointers to authenc keys (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak
(bsc#1051510).
- crypto: crypto4xx - remove bad list_del (bsc#1051510).
- crypto: gf128mul - The x8_ble multiplication functions (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- crypto: sha512-mb - add some missing unlock on error (bsc#1051510).
- cxgb4/cxgb4vf: Notify link changes to OS-dependent code (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4/cxgb4vf: add support for ndo_set_vf_vlan (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4/cxgb4vf: check fw caps to set link mode mask (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4/cxgb4vf: link management changes for new SFP (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add FORCE_PAUSE bit to 32 bit port caps (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add HMA support (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588
bsc#1097583 bsc#1097584).
- cxgb4: Add TP Congestion map entry for single-port (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add new T5 device id (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add new T6 device ids (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add support for ethtool i2c dump (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add support to initialise/read SRQ entries (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Add support to query HW SRQ parameters (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Adds CPL support for Shared Receive Queues (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Check alignment constraint for T6 (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Check for kvzalloc allocation failure (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Fix error handling path in 'init_one()' (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Fix queue free path of ULD drivers (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Fix {vxlan/geneve}_port initialization (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: IPv6 filter takes 2 tids (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Setup FW queues before registering netdev (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Support firmware rdma write completion work request (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: Support firmware rdma write with immediate work request
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- cxgb4: add new T5 device id's (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: avoid schedule while atomic (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: change the port capability bits definition (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: clean up init_one (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: collect SGE PF/VF queue map (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: collect hardware dump in second kernel (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: copy adap index to PF0-3 adapter instances (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: copy mbox log size to PF0-3 adap instances (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: copy the length of cpl_tx_pkt_core to fw_wr (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: copy vlan_id in ndo_get_vf_config (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: depend on firmware event for link status (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: do L1 config when module is inserted (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: do not display 50Gbps as unsupported speed (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: do not fail vf instatiation in slave mode (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: do not set needs_free_netdev for mgmt dev's (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: enable ZLib_DEFLATE when building cxgb4 (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: enable inner header checksum calculation (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: fix the wrong conversion of Mbps to Kbps (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: free up resources of pf 0-3 (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: increase max tx rate limit to 100 Gbps (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: notify fatal error to uld drivers (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: remove dead code when allocating filter (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: restructure VF mgmt code (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: rework on-chip memory read (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: support new ISSI flash parts (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: update LE-TCAM collection for T6 (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: update dump collection logic to use compression (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: update latest firmware version supported (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: update latest firmware version supported (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: use CLIP with LIP6 on T6 for TCAM filters (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: use zlib deflate to compress firmware dump (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4: zero the HMA memory (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4vf: Forcefully link up virtual interfaces (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- cxgb4vf: display pause settings (bsc#1097585 bsc#1097586 bsc#1097587
bsc#1097588 bsc#1097583 bsc#1097584).
- cxgbit: call neigh_event_send() to update MAC address (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- dccp: do not free ccid2_hc_tx_sock struct in dccp_disconnect()
(networking-stable-18_06_08).
- device property: Allow iterating over available child fwnodes
(bsc#1098633).
- device property: Introduce fwnode_call_bool_op() for ops that return
bool (bsc#1098633).
- device property: Introduce fwnode_device_is_available() (bsc#1098633).
- device property: Introduce fwnode_get_mac_address() (bsc#1098633).
- device property: Introduce fwnode_get_phy_mode() (bsc#1098633).
- device property: Introduce fwnode_irq_get() (bsc#1098633).
- device property: Move FW type specific functionality to FW specific
files (bsc#1098633).
- device property: Move fwnode graph ops to firmware specific locations
(bsc#1098633).
- device property: preserve usecount for node passed to
of_fwnode_graph_get_port_parent() (bsc#1098633).
- dmaengine: fsl-edma: disable clks on all error paths (bsc#1051510).
- dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate() (bsc#1051510).
- dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
(bsc#1051510).
- dmaengine: omap-dma: port_window support correction for both direction
(bsc#1051510).
- dmaengine: pl330: fix a race condition in case of threaded irqs
(bsc#1051510).
- dmaengine: pl330: report BURST residue granularity (bsc#1051510).
- dmaengine: qcom: bam_dma: get num-channels and num-ees from dt
(bsc#1051510).
- dmaengine: qcom_hidma: check pending interrupts (bsc#1051510).
- dmaengine: rcar-dmac: Check the done lists in
rcar_dmac_chan_get_residue() (bsc#1051510).
- dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3 (bsc#1051510).
- dmaengine: tegra-apb: Really fix runtime-pm usage (bsc#1051510).
- dmaengine: tegra210-adma: fix of_irq_get() error check (bsc#1051510).
- dmaengine: xilinx_dma: Fix error code format specifier (bsc#1051510).
- dmaengine: zynqmp_dma: Fix race condition in the probe (bsc#1051510).
- doc: Rename .system_keyring to .builtin_trusted_keys (bsc#1051510).
- doc: SKB_GSO_[IPIP|SIT] have been replaced (bsc#1051510).
- docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
(bsc#1051510).
- docs: segmentation-offloads.txt: Fix ref to SKB_GSO_TUNNEL_REMCSUM
(bsc#1051510).
- docu: admin-guide: intel_pstate: Fix sysfs path (bsc#1051510).
- dp83640: Ensure against premature access to PHY registers after reset
(bsc#1051510).
- drbd: fix access after free (bsc#1051510).
- driver core: Fix link to device power management documentation
(bsc#1051510).
- driver core: Partially revert "driver core: correct device's shutdown
order" (bsc#1051510).
- drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
(bsc#1051510).
- drivers/net/ethernet/qlogic/qed: Fix __qed_spq_block() ordering
(bsc#1086314 bsc#1086313 bsc#1086301).
- drivers/net/ethernet/qlogic/qed: Fix __qed_spq_block() ordering
(bsc#1086314 bsc#1086313 bsc#1086301).
- drivers: net: i40evf: use setup_timer() helper (bsc#1101816).
- drivers: net: i40evf: use setup_timer() helper (bsc#1101816).
- drm/bridge/sii8620: fix potential buffer overflow (bsc#1051510).
- drm/exynos: Fix dma-buf import (bsc#1051510).
- drm/i915/dp: Send DPCD ON for MST before phy_up (bsc#1051510).
- drm/i915: Fix hotplug irq ack on i965/g4x (bsc#1051510).
- drm/i915: Only call tasklet_kill() on the first prepare_reset
(bsc#1051510).
- drm/nouveau/drm/nouveau: Fix runtime pm leak in
nv50_disp_atomic_commit() (bsc#1090888).
- drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()
(bsc#1051510).
- drm/nouveau: Avoid looping through fake MST connectors (bsc#1051510).
- drm/nouveau: Use drm_connector_list_iter_* for iterating connectors
(bsc#1051510).
- drm/rockchip: Fix build warning in analogix_dp-rockchip.c (bsc#1085536).
- drm/rockchip: analogix_dp: Remove unnecessary init code (bsc#1085536).
- drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind()
(bsc#1087092).
- drm/rockchip: inno_hdmi: Fix error handling path (bsc#1087092).
- drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbind
(bsc#1087092).
- drm/tegra: Acquire a reference to the IOVA cache (bsc#1090888).
- drm/udl: fix display corruption of the last line (bsc#1101337).
- drm: Use kvzalloc for allocating blob property memory (bsc#1101352).
- drm: mali-dp: Uninitialized variable in malidp_se_check_scaling()
(bsc#1087092).
- drm: rcar-du: Remove zpos field from rcar_du_vsp_plane_state structure
(bsc#1085539).
- drm: rcar-du: lvds: Fix LVDCR1 for R-Car gen3 (bsc#1085539).
- dvb_frontend: do not use-after-free the frontend struct (bsc#1051510).
- efi/efi_test: Prevent an Oops in efi_runtime_query_capsulecaps()
(bsc#1051510).
- enic: do not overwrite error code (bsc#1037697).
- enic: enable rq before updating rq descriptors (bsc#1037697).
- enic: set DMA mask to 47 bit (networking-stable-18_06_08).
- ethtool: add ethtool_intersect_link_masks (bsc#1101816).
- ethtool: add ethtool_intersect_link_masks (bsc#1101816).
- firewire: net: max MTU off by one (bsc#1051510).
- firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
(bsc#1051510).
- firmware: dmi: Optimize dmi_matches (bsc#1051510).
- firmware: tegra: Fix locking bugs in BpmP (bsc#1051510).
- fix kabi due to perf_event.h uapi field change ().
- fm10k: Fix configuration for macvlan offload (bsc#1101813).
- fm10k: Fix configuration for macvlan offload (bsc#1101813).
- fm10k: Fix misuse of net_ratelimit() (bsc#1101813).
- fm10k: Fix misuse of net_ratelimit() (bsc#1101813).
- fm10k: Use seq_putc() in fm10k_dbg_desc_break() (bsc#1101813).
- fm10k: Use seq_putc() in fm10k_dbg_desc_break() (bsc#1101813).
- fm10k: add missing fall through comment (bsc#1101813).
- fm10k: add missing fall through comment (bsc#1101813).
- fm10k: avoid divide by zero in rare cases when device is resetting
(bsc#1101813).
- fm10k: avoid divide by zero in rare cases when device is resetting
(bsc#1101813).
- fm10k: avoid needless delay when loading driver (bsc#1101813).
- fm10k: avoid needless delay when loading driver (bsc#1101813).
- fm10k: avoid possible truncation of q_vector->name (bsc#1101813).
- fm10k: avoid possible truncation of q_vector->name (bsc#1101813).
- fm10k: bump version number (bsc#1101813).
- fm10k: bump version number (bsc#1101813).
- fm10k: bump version number (bsc#1101813).
- fm10k: bump version number (bsc#1101813).
- fm10k: clarify action when updating the VLAN table (bsc#1101813).
- fm10k: clarify action when updating the VLAN table (bsc#1101813).
- fm10k: cleanup unnecessary parenthesis in fm10k_iov.c (bsc#1101813).
- fm10k: cleanup unnecessary parenthesis in fm10k_iov.c (bsc#1101813).
- fm10k: correct typo in fm10k_pf.c (bsc#1101813).
- fm10k: correct typo in fm10k_pf.c (bsc#1101813).
- fm10k: do not assume VLAN 1 is enabled (bsc#1101813).
- fm10k: do not assume VLAN 1 is enabled (bsc#1101813).
- fm10k: do not loop while resetting VFs due to VFLR event (bsc#1101813).
- fm10k: do not loop while resetting VFs due to VFLR event (bsc#1101813).
- fm10k: do not protect fm10k_queue_mac_request by fm10k_host_mbx_ready
(bsc#1101813).
- fm10k: do not protect fm10k_queue_mac_request by fm10k_host_mbx_ready
(bsc#1101813).
- fm10k: fix "failed to kill vid" message for VF (bsc#1101813).
- fm10k: fix "failed to kill vid" message for VF (bsc#1101813).
- fm10k: fix function doxygen comments (bsc#1101813).
- fm10k: fix function doxygen comments (bsc#1101813).
- fm10k: fix incorrect warning for function prototype (bsc#1101813).
- fm10k: fix incorrect warning for function prototype (bsc#1101813).
- fm10k: fix typos on fall through comments (bsc#1101813).
- fm10k: fix typos on fall through comments (bsc#1101813).
- fm10k: introduce a message queue for MAC/VLAN messages (bsc#1101813).
- fm10k: introduce a message queue for MAC/VLAN messages (bsc#1101813).
- fm10k: mark pm functions as __maybe_unused (bsc#1101813).
- fm10k: mark pm functions as __maybe_unused (bsc#1101813).
- fm10k: move fm10k_prepare_for_reset and fm10k_handle_reset
(bsc#1101813).
- fm10k: move fm10k_prepare_for_reset and fm10k_handle_reset (bsc#1101813).
- fm10k: prefer %s and __func__ for diagnostic prints (bsc#1101813).
- fm10k: prefer %s and __func__ for diagnostic prints (bsc#1101813).
- fm10k: prepare_for_reset() when we lose pcie Link (bsc#1101813).
- fm10k: prepare_for_reset() when we lose pcie Link (bsc#1101813).
- fm10k: prevent race condition of __FM10K_SERVICE_SCHED (bsc#1101813).
- fm10k: prevent race condition of __FM10K_SERVICE_SCHED (bsc#1101813).
- fm10k: reduce duplicate fm10k_stat macro code (bsc#1101813).
- fm10k: reduce duplicate fm10k_stat macro code (bsc#1101813).
- fm10k: reschedule service event if we stall the PF<->SM mailbox
(bsc#1101813).
- fm10k: reschedule service event if we stall the PF->SM mailbox
(bsc#1101813).
- fm10k: setup VLANs for l2 accelerated macvlan interfaces (bsc#1101813).
- fm10k: setup VLANs for l2 accelerated macvlan interfaces (bsc#1101813).
- fm10k: simplify reading PFVFLRE register (bsc#1101813).
- fm10k: simplify reading PFVFLRE register (bsc#1101813).
- fm10k: stop adding VLAN 0 to the VLAN table (bsc#1101813).
- fm10k: stop adding VLAN 0 to the VLAN table (bsc#1101813).
- fm10k: stop spurious link down messages when Tx FIFO is full
(bsc#1101813).
- fm10k: stop spurious link down messages when Tx FIFO is full
(bsc#1101813).
- fm10k: use generic pm hooks instead of legacy pcie power hooks
(bsc#1101813).
- fm10k: use generic pm hooks instead of legacy pcie power hooks
(bsc#1101813).
- fm10k: use macro to avoid passing the array and size separately
(bsc#1101813).
- fm10k: use macro to avoid passing the array and size separately
(bsc#1101813).
- fm10k: use spinlock to implement mailbox lock (bsc#1101813).
- fm10k: use spinlock to implement mailbox lock (bsc#1101813).
- fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN requests
(bsc#1101813).
- fm10k: use the MAC/VLAN queue for VF->PF MAC/VLAN requests (bsc#1101813).
- fm10k: use variadic arguments to fm10k_add_stat_strings (bsc#1101813).
- fm10k: use variadic arguments to fm10k_add_stat_strings (bsc#1101813).
- fm10k: warn if the stat size is unknown (bsc#1101813).
- fm10k: warn if the stat size is unknown (bsc#1101813).
- fsi: core: register with postcore_initcall (bsc#1051510).
- fuse: Remove the buggy retranslation of pids in fuse_dev_do_read
(bsc#1051510).
- fuse: atomic_o_trunc should truncate pagecache (bsc#1051510).
- fuse: do not keep dead fuse_conn at fuse_fill_super() (bsc#1051510).
- fuse: fix congested state leak on aborted connections (bsc#1051510).
- fuse: fix control dir setup and teardown (bsc#1051510).
- gpio: acpi: work around false-positive -Wstring-overflow warning
(bsc#1051510).
- gpio: brcmstb: allow all instances to be wakeup sources (bsc#1051510).
- gpio: brcmstb: check return value of gpiochip_irqchip_add()
(bsc#1051510).
- gpio: brcmstb: correct the configuration of level interrupts
(bsc#1051510).
- gpio: brcmstb: release the bgpio lock during irq handlers (bsc#1051510).
- gpio: brcmstb: switch to handle_level_irq flow (bsc#1051510).
- gpio: pca953x: fix vendor prefix for PCA9654 (bsc#1051510).
- gpio: reject invalid gpio before getting gpio_desc (bsc#1051510).
- gpio: tegra: fix unbalanced chained_irq_enter/exit (bsc#1051510).
- gpu: host1x: Acquire a reference to the IOVA cache (bsc#1090888).
- hwmon: (aspeed-pwm) add THERMAL dependency (bsc#1051510).
- hwmon: (ftsteutates) Fix clearing alarm sysfs entries (bsc#1051510).
- hwmon: (ltc2990) Fix incorrect conversion of negative temperatures
(bsc#1051510).
- hwmon: (nct6683) Enable EC access if disabled at boot (bsc#1051510).
- hwmon: (stts751) buffer overrun on wrong chip configuration
(bsc#1051510).
- hwmon: (tmp102) Fix first temperature reading (bsc#1051510).
- hwmon: Deal with errors from the thermal subsystem (bsc#1051510).
- hwrng: stm32 - add reset during probe (bsc#1051510).
- i2c: axxia: enable clock before calling clk_get_rate() (bsc#1051510).
- i2c: designware: Round down ACPI provided clk to nearest supported clk
(bsc#1051510).
- i2c: mux: pinctrl: mention correct module name in Kconfig help text
(bsc#1051510).
- i2c: tegra: Fix NACK error handling (bsc#1051510).
- i40e/i40evf: Add support for new mechanism of updating adaptive ITR
(bsc#1101816).
- i40e/i40evf: Add support for new mechanism of updating adaptive ITR
(bsc#1101816).
- i40e/i40evf: Bump driver versions (bsc#1101816).
- i40e/i40evf: Bump driver versions (bsc#1101816).
- i40e/i40evf: Clean up logic for adaptive ITR (bsc#1101816).
- i40e/i40evf: Clean up logic for adaptive ITR (bsc#1101816).
- i40e/i40evf: Clean-up of bits related to using q_vector->reg_idx
(bsc#1101816).
- i40e/i40evf: Clean-up of bits related to using q_vector->reg_idx
(bsc#1101816).
- i40e/i40evf: Detect and recover hung queue scenario (bsc#1101816).
- i40e/i40evf: Detect and recover hung queue scenario (bsc#1101816).
- i40e/i40evf: Do not bother setting the CLEARPBA bit (bsc#1101816).
- i40e/i40evf: Do not bother setting the CLEARPBA bit (bsc#1101816).
- i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation
flags for NVM update (bsc#1101816).
- i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation
flags for NVM update (bsc#1101816).
- i40e/i40evf: Only track one ITR setting per ring instead of Tx/Rx
(bsc#1101816).
- i40e/i40evf: Only track one ITR setting per ring instead of Tx/Rx
(bsc#1101816).
- i40e/i40evf: Record ITR register location in the q_vector (bsc#1101816).
- i40e/i40evf: Record ITR register location in the q_vector (bsc#1101816).
- i40e/i40evf: Split container ITR into current_itr and target_itr
(bsc#1101816).
- i40e/i40evf: Split container ITR into current_itr and target_itr
(bsc#1101816).
- i40e/i40evf: Update DESC_NEEDED value to reflect larger value
(bsc#1101816).
- i40e/i40evf: Update DESC_NEEDED value to reflect larger value
(bsc#1101816).
- i40e/i40evf: Use ring pointers to clean up _set_itr_per_queue
(bsc#1101816).
- i40e/i40evf: Use ring pointers to clean up _set_itr_per_queue
(bsc#1101816).
- i40e/i40evf: Use usec value instead of reg value for ITR defines
(bsc#1101816).
- i40e/i40evf: Use usec value instead of reg value for ITR defines
(bsc#1101816).
- i40e/i40evf: always set the CLEARPBA flag when re-enabling interrupts
(bsc#1101816).
- i40e/i40evf: always set the CLEARPBA flag when re-enabling interrupts
(bsc#1101816).
- i40e/i40evf: bundle more descriptors when allocating buffers
(bsc#1101816).
- i40e/i40evf: bundle more descriptors when allocating buffers
(bsc#1101816).
- i40e/i40evf: cleanup incorrect function doxygen comments (bsc#1101816).
- i40e/i40evf: cleanup incorrect function doxygen comments (bsc#1101816).
- i40e/i40evf: do not trust VF to reset itself (bsc#1101816).
- i40e/i40evf: do not trust VF to reset itself (bsc#1101816).
- i40e/i40evf: fix incorrect default ITR values on driver load
(bsc#1101816).
- i40e/i40evf: fix incorrect default ITR values on driver load
(bsc#1101816).
- i40e/i40evf: organize and re-number feature flags (bsc#1101816).
- i40e/i40evf: organize and re-number feature flags (bsc#1101816).
- i40e/i40evf: rename bytes_per_int to bytes_per_usec (bsc#1101816).
- i40e/i40evf: rename bytes_per_int to bytes_per_usec (bsc#1101816).
- i40e/i40evf: use DECLARE_BITMAP for state (bsc#1101816).
- i40e/i40evf: use DECLARE_BITMAP for state (bsc#1101816).
- i40e/i40evf: use SW variables for hang detection (bsc#1101816).
- i40e/i40evf: use SW variables for hang detection (bsc#1101816).
- i40e/virtchnl: fix application of sizeof to pointer (bsc#1101816).
- i40e/virtchnl: fix application of sizeof to pointer (bsc#1101816).
- i40e: Add advertising 10G LR mode (bsc#1101816).
- i40e: Add advertising 10G LR mode (bsc#1101816).
- i40e: Add delay after EMP reset for firmware to recover (bsc#1101816).
- i40e: Add delay after EMP reset for firmware to recover (bsc#1101816).
- i40e: Add infrastructure for queue channel support (bsc#1101816).
- i40e: Add infrastructure for queue channel support (bsc#1101816).
- i40e: Add macro for PF reset bit (bsc#1101816).
- i40e: Add macro for PF reset bit (bsc#1101816).
- i40e: Add new PHY types for 25G AOC and ACC support (bsc#1101816).
- i40e: Add new PHY types for 25G AOC and ACC support (bsc#1101816).
- i40e: Add returning AQ critical error to SW (bsc#1101816).
- i40e: Add returning AQ critical error to SW (bsc#1101816).
- i40e: Add support for 'ethtool -m' (bsc#1101816).
- i40e: Add support for 'ethtool -m' (bsc#1101816).
- i40e: Cleanup i40e_vlan_rx_register (bsc#1101816).
- i40e: Cleanup i40e_vlan_rx_register (bsc#1101816).
- i40e: Delete an error message for a failed memory allocation in
i40e_init_interrupt_scheme() (bsc#1101816).
- i40e: Delete an error message for a failed memory allocation in
i40e_init_interrupt_scheme() (bsc#1101816).
- i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events
(bsc#1101816).
- i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events
(bsc#1101816).
- i40e: Display error message if module does not meet thermal
requirements (bsc#1101816).
- i40e: Display error message if module does not meet thermal requirements
(bsc#1101816).
- i40e: Enable VF to negotiate number of allocated queues (bsc#1101816).
- i40e: Enable VF to negotiate number of allocated queues (bsc#1101816).
- i40e: Fix FLR reset timeout issue (bsc#1101816).
- i40e: Fix FLR reset timeout issue (bsc#1101816).
- i40e: Fix a potential NULL pointer dereference (bsc#1101816).
- i40e: Fix a potential NULL pointer dereference (bsc#1101816).
- i40e: Fix for NUP NVM image downgrade failure (bsc#1101816).
- i40e: Fix for NUP NVM image downgrade failure (bsc#1101816).
- i40e: Fix for adding multiple ethtool filters on the same location
(bsc#1101816).
- i40e: Fix for adding multiple ethtool filters on the same location
(bsc#1101816).
- i40e: Fix for blinking activity instead of link LEDs (bsc#1101816).
- i40e: Fix for blinking activity instead of link LEDs (bsc#1101816).
- i40e: Fix kdump failure (bsc#1101816).
- i40e: Fix kdump failure (bsc#1101816).
- i40e: Fix link down message when interface is brought up (bsc#1101816).
- i40e: Fix link down message when interface is brought up (bsc#1101816).
- i40e: Fix multiple issues with UDP tunnel offload filter configuration
(bsc#1101816).
- i40e: Fix multiple issues with UDP tunnel offload filter configuration
(bsc#1101816).
- i40e: Fix permission check for VF MAC filters (bsc#1101816).
- i40e: Fix permission check for VF MAC filters (bsc#1101816).
- i40e: Fix recalculation of MSI-X vectors for VMDq (bsc#1101816).
- i40e: Fix recalculation of MSI-X vectors for VMDq (bsc#1101816).
- i40e: Fix reporting of supported link modes (bsc#1101816).
- i40e: Fix reporting of supported link modes (bsc#1101816).
- i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATE (bsc#1101816).
- i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATE (bsc#1101816).
- i40e: Fix unqualified module message while bringing link up
(bsc#1101816).
- i40e: Fix unqualified module message while bringing link up
(bsc#1101816).
- i40e: Prevent setting link speed on I40E_DEV_ID_25G_B (bsc#1101816).
- i40e: Prevent setting link speed on I40E_DEV_ID_25G_B (bsc#1101816).
- i40e: Prevent setting link speed on KX_X722 (bsc#1101816).
- i40e: Prevent setting link speed on KX_X722 (bsc#1101816).
- i40e: Properly maintain flow director filters list (bsc#1101816).
- i40e: Properly maintain flow director filters list (bsc#1101816).
- i40e: Remove limit of 64 max queues per channel (bsc#1101816).
- i40e: Remove limit of 64 max queues per channel (bsc#1101816).
- i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs (bsc#1101816).
- i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs (bsc#1101816).
- i40e: Stop dropping 802.1ad tags - eth proto 0x88a8 (bsc#1101816).
- i40e: Stop dropping 802.1ad tags - eth proto 0x88a8 (bsc#1101816).
- i40e: add check for return from find_first_bit call (bsc#1101816).
- i40e: add check for return from find_first_bit call (bsc#1101816).
- i40e: add doxygen comment for new mode parameter (bsc#1101816).
- i40e: add doxygen comment for new mode parameter (bsc#1101816).
- i40e: add function doc headers for ethtool stats functions
(bsc#1101816).
- i40e: add function doc headers for ethtool stats functions (bsc#1101816).
- i40e: add function header for i40e_get_rxfh (bsc#1101816).
- i40e: add function header for i40e_get_rxfh (bsc#1101816).
- i40e: add helper conversion function for link_speed (bsc#1101816).
- i40e: add helper conversion function for link_speed (bsc#1101816).
- i40e: add tx_busy to ethtool stats (bsc#1101816).
- i40e: add tx_busy to ethtool stats (bsc#1101816).
- i40e: allow XPS with QoS enabled (bsc#1101816).
- i40e: allow XPS with QoS enabled (bsc#1101816).
- i40e: always return VEB stat strings (bsc#1101816).
- i40e: always return VEB stat strings (bsc#1101816).
- i40e: always return all queue stat strings (bsc#1101816).
- i40e: always return all queue stat strings (bsc#1101816).
- i40e: avoid divide by zero (bsc#1101816).
- i40e: avoid divide by zero (bsc#1101816).
- i40e: avoid overflow in i40e_ptp_adjfreq() (bsc#1101816).
- i40e: avoid overflow in i40e_ptp_adjfreq() (bsc#1101816).
- i40e: broadcast filters can trigger overflow promiscuous (bsc#1101816).
- i40e: broadcast filters can trigger overflow promiscuous (bsc#1101816).
- i40e: calculate ethtool stats size in a separate function (bsc#1101816).
- i40e: calculate ethtool stats size in a separate function (bsc#1101816).
- i40e: change flags to use 64 bits (bsc#1101816).
- i40e: change flags to use 64 bits (bsc#1101816).
- i40e: change ppp name to ddp (bsc#1101816).
- i40e: change ppp name to ddp (bsc#1101816).
- i40e: check for invalid DCB config (bsc#1101816).
- i40e: check for invalid DCB config (bsc#1101816).
- i40e: cleanup unnecessary parens (bsc#1101816).
- i40e: cleanup unnecessary parens (bsc#1101816).
- i40e: cleanup whitespace for some ethtool stat definitions
(bsc#1101816).
- i40e: cleanup whitespace for some ethtool stat definitions (bsc#1101816).
- i40e: cleanup wording in a header comment (bsc#1101816).
- i40e: cleanup wording in a header comment (bsc#1101816).
- i40e: convert i40e_get_settings_link_up to new API (bsc#1101816).
- i40e: convert i40e_get_settings_link_up to new API (bsc#1101816).
- i40e: convert i40e_phy_type_to_ethtool to new API (bsc#1101816).
- i40e: convert i40e_phy_type_to_ethtool to new API (bsc#1101816).
- i40e: convert i40e_set_link_ksettings to new API (bsc#1101816).
- i40e: convert i40e_set_link_ksettings to new API (bsc#1101816).
- i40e: disallow programming multiple filters with same criteria
(bsc#1101816).
- i40e: disallow programming multiple filters with same criteria
(bsc#1101816).
- i40e: display priority_xon and priority_xoff stats (bsc#1101816).
- i40e: display priority_xon and priority_xoff stats (bsc#1101816).
- i40e: do not clear suspended state until we finish resuming
(bsc#1101816).
- i40e: do not clear suspended state until we finish resuming
(bsc#1101816).
- i40e: do not enter PHY debug mode while setting LEDs behaviour
(bsc#1101816).
- i40e: do not enter PHY debug mode while setting LEDs behaviour
(bsc#1101816).
- i40e: do not force filter failure in overflow promiscuous (bsc#1101816).
- i40e: do not force filter failure in overflow promiscuous (bsc#1101816).
- i40e: do not hold spinlock while resetting VF (bsc#1101816).
- i40e: do not hold spinlock while resetting VF (bsc#1101816).
- i40e: do not leak memory addresses (bsc#1101816).
- i40e: do not leak memory addresses (bsc#1101816).
- i40e: drop i40e_pf *pf from i40e_vc_disable_vf() (bsc#1101816).
- i40e: drop i40e_pf *pf from i40e_vc_disable_vf() (bsc#1101816).
- i40e: ensure reset occurs when disabling VF (bsc#1101816).
- i40e: ensure reset occurs when disabling VF (bsc#1101816).
- i40e: factor out re-enable functions for ATR and SB (bsc#1101816).
- i40e: factor out re-enable functions for ATR and SB (bsc#1101816).
- i40e: fix a typo (bsc#1101816).
- i40e: fix a typo (bsc#1101816).
- i40e: fix a typo in i40e_pf documentation (bsc#1101816).
- i40e: fix a typo in i40e_pf documentation (bsc#1101816).
- i40e: fix clearing link masks in i40e_get_link_ksettings (bsc#1101816).
- i40e: fix clearing link masks in i40e_get_link_ksettings (bsc#1101816).
- i40e: fix comment typo (bsc#1101816).
- i40e: fix comment typo (bsc#1101816).
- i40e: fix flags declaration (bsc#1101816).
- i40e: fix flags declaration (bsc#1101816).
- i40e: fix for flow director counters not wrapping as expected
(bsc#1101816).
- i40e: fix for flow director counters not wrapping as expected
(bsc#1101816).
- i40e: fix for wrong partition id calculation on OCP mezz cards
(bsc#1101816).
- i40e: fix for wrong partition id calculation on OCP mezz cards
(bsc#1101816).
- i40e: fix handling of vf_states variable (bsc#1101816).
- i40e: fix handling of vf_states variable (bsc#1101816).
- i40e: fix i40e_phy_type_to_ethtool function header (bsc#1101816).
- i40e: fix i40e_phy_type_to_ethtool function header (bsc#1101816).
- i40e: fix incorrect register definition (bsc#1101816).
- i40e: fix incorrect register definition (bsc#1101816).
- i40e: fix link reporting (bsc#1101816).
- i40e: fix link reporting (bsc#1101816).
- i40e: fix merge error (bsc#1101816).
- i40e: fix merge error (bsc#1101816).
- i40e: fix reading LLDP configuration (bsc#1101816).
- i40e: fix reading LLDP configuration (bsc#1101816).
- i40e: fix typo in function description (bsc#1101816).
- i40e: fix typo in function description (bsc#1101816).
- i40e: fix whitespace issues in i40e_ethtool.c (bsc#1101816).
- i40e: fix whitespace issues in i40e_ethtool.c (bsc#1101816).
- i40e: fold prefix strings directly into stat names (bsc#1101816).
- i40e: fold prefix strings directly into stat names (bsc#1101816).
- i40e: free skb after clearing lock in ptp_stop (bsc#1101816).
- i40e: free skb after clearing lock in ptp_stop (bsc#1101816).
- i40e: free the skb after clearing the bitlock (bsc#1101816).
- i40e: free the skb after clearing the bitlock (bsc#1101816).
- i40e: group autoneg PHY types together (bsc#1101816).
- i40e: group autoneg PHY types together (bsc#1101816).
- i40e: hold the RTNL lock while changing interrupt schemes (bsc#1101816).
- i40e: hold the RTNL lock while changing interrupt schemes (bsc#1101816).
- i40e: ignore skb->xmit_more when deciding to set RS bit (bsc#1101816).
- i40e: ignore skb->xmit_more when deciding to set RS bit (bsc#1101816).
- i40e: implement split pci error reset handler (bsc#1101816).
- i40e: implement split pci error reset handler (bsc#1101816).
- i40e: limit lan queue count in large CPU count machine (bsc#1101816).
- i40e: limit lan queue count in large CPU count machine (bsc#1101816).
- i40e: make const array patterns static, reduces object code size
(bsc#1101816).
- i40e: make const array patterns static, reduces object code size
(bsc#1101816).
- i40e: make i40evf_map_rings_to_vectors void (bsc#1101816).
- i40e: make i40evf_map_rings_to_vectors void (bsc#1101816).
- i40e: make use of i40e_vc_disable_vf (bsc#1101816).
- i40e: make use of i40e_vc_disable_vf (bsc#1101816).
- i40e: mark pm functions as __maybe_unused (bsc#1101816).
- i40e: mark pm functions as __maybe_unused (bsc#1101816).
- i40e: move AUTO_DISABLED flags into the state field (bsc#1101816).
- i40e: move AUTO_DISABLED flags into the state field (bsc#1101816).
- i40e: move I40E_FLAG_FILTER_SYNC to a state bit (bsc#1101816).
- i40e: move I40E_FLAG_FILTER_SYNC to a state bit (bsc#1101816).
- i40e: move I40E_FLAG_TEMP_LINK_POLLING to state field (bsc#1101816).
- i40e: move I40E_FLAG_TEMP_LINK_POLLING to state field (bsc#1101816).
- i40e: move I40E_FLAG_UDP_FILTER_SYNC to the state field (bsc#1101816).
- i40e: move I40E_FLAG_UDP_FILTER_SYNC to the state field (bsc#1101816).
- i40e: move client flags into state bits (bsc#1101816).
- i40e: move client flags into state bits (bsc#1101816).
- i40e: prevent service task from running while we're suspended
(bsc#1101816).
- i40e: prevent service task from running while we're suspended
(bsc#1101816).
- i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0 (bsc#1101816).
- i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0 (bsc#1101816).
- i40e: re-number feature flags to remove gaps (bsc#1101816).
- i40e: re-number feature flags to remove gaps (bsc#1101816).
- i40e: redfine I40E_PHY_TYPE_MAX (bsc#1101816).
- i40e: redfine I40E_PHY_TYPE_MAX (bsc#1101816).
- i40e: reduce lrxqthresh from 2 to 1 (bsc#1101816).
- i40e: reduce lrxqthresh from 2 to 1 (bsc#1101816).
- i40e: refactor FW version checking (bsc#1101816).
- i40e: refactor FW version checking (bsc#1101816).
- i40e: refactor promisc_changed in i40e_sync_vsi_filters (bsc#1101816).
- i40e: refactor promisc_changed in i40e_sync_vsi_filters (bsc#1101816).
- i40e: relax warning message in case of version mismatch (bsc#1101816).
- i40e: relax warning message in case of version mismatch (bsc#1101816).
- i40e: remove duplicate pfc stats (bsc#1101816).
- i40e: remove duplicate pfc stats (bsc#1101816).
- i40e: remove i40e_fcoe files (bsc#1101816).
- i40e: remove i40e_fcoe files (bsc#1101816).
- i40e: remove ifdef SPEED_25000 (bsc#1101816).
- i40e: remove ifdef SPEED_25000 (bsc#1101816).
- i40e: remove logically dead code (bsc#1101816).
- i40e: remove logically dead code (bsc#1101816).
- i40e: remove redundant initialization of read_size (bsc#1101816).
- i40e: remove redundant initialization of read_size (bsc#1101816).
- i40e: rename 'change' variable to 'autoneg_changed' (bsc#1101816).
- i40e: rename 'change' variable to 'autoneg_changed' (bsc#1101816).
- i40e: rename 'cmd' variables in ethtool interface (bsc#1101816).
- i40e: rename 'cmd' variables in ethtool interface (bsc#1101816).
- i40e: restore TCPv4 input set when re-enabling ATR (bsc#1101816).
- i40e: restore TCPv4 input set when re-enabling ATR (bsc#1101816).
- i40e: restore promiscuous after reset (bsc#1101816).
- i40e: restore promiscuous after reset (bsc#1101816).
- i40e: shutdown all IRQs and disable MSI-X when suspended (bsc#1101816).
- i40e: shutdown all IRQs and disable MSI-X when suspended (bsc#1101816).
- i40e: simplify member variable accesses (bsc#1101816).
- i40e: simplify member variable accesses (bsc#1101816).
- i40e: split i40e_get_strings() into smaller functions (bsc#1101816).
- i40e: split i40e_get_strings() into smaller functions (bsc#1101816).
- i40e: stop using cmpxchg flow in i40e_set_priv_flags() (bsc#1101816).
- i40e: stop using cmpxchg flow in i40e_set_priv_flags() (bsc#1101816).
- i40e: track filter type statistics when deleting invalid filters
(bsc#1101816).
- i40e: track filter type statistics when deleting invalid filters
(bsc#1101816).
- i40e: track id can be 0 (bsc#1101816).
- i40e: track id can be 0 (bsc#1101816).
- i40e: update VFs of link state after GET_VF_RESOURCES (bsc#1101816).
- i40e: update VFs of link state after GET_VF_RESOURCES (bsc#1101816).
- i40e: update data pointer directly when copying to the buffer
(bsc#1101816).
- i40e: update data pointer directly when copying to the buffer
(bsc#1101816).
- i40e: use WARN_ONCE to replace the commented BUG_ON size check
(bsc#1101816).
- i40e: use WARN_ONCE to replace the commented BUG_ON size check
(bsc#1101816).
- i40e: use a local variable instead of calculating multiple times
(bsc#1101816).
- i40e: use a local variable instead of calculating multiple times
(bsc#1101816).
- i40e: use admin queue for setting LEDs behavior (bsc#1101816).
- i40e: use admin queue for setting LEDs behavior (bsc#1101816).
- i40e: use newer generic pm support instead of legacy pm callbacks
(bsc#1101816).
- i40e: use newer generic pm support instead of legacy pm callbacks
(bsc#1101816).
- i40e: use separate state bit for miscellaneous IRQ setup (bsc#1101816).
- i40e: use separate state bit for miscellaneous IRQ setup (bsc#1101816).
- i40e: use the more traditional 'i' loop variable (bsc#1101816).
- i40e: use the more traditional 'i' loop variable (bsc#1101816).
- i40evf: Allow turning off offloads when the VF has VLAN set
(bsc#1101816).
- i40evf: Allow turning off offloads when the VF has VLAN set
(bsc#1101816).
- i40evf: Clean-up flags for promisc mode to avoid high polling rate
(bsc#1101816).
- i40evf: Clean-up flags for promisc mode to avoid high polling rate
(bsc#1101816).
- i40evf: Correctly populate rxitr_idx and txitr_idx (bsc#1101816).
- i40evf: Correctly populate rxitr_idx and txitr_idx (bsc#1101816).
- i40evf: Do not clear MSI-X PBA manually (bsc#1101816).
- i40evf: Do not clear MSI-X PBA manually (bsc#1101816).
- i40evf: Drop i40evf_fire_sw_int as it is prone to races (bsc#1101816).
- i40evf: Drop i40evf_fire_sw_int as it is prone to races (bsc#1101816).
- i40evf: Enable VF to request an alternate queue allocation
(bsc#1101816).
- i40evf: Enable VF to request an alternate queue allocation (bsc#1101816).
- i40evf: Fix a hardware reset support in VF driver (bsc#1101816).
- i40evf: Fix a hardware reset support in VF driver (bsc#1101816).
- i40evf: Fix double locking the same resource (bsc#1101816).
- i40evf: Fix double locking the same resource (bsc#1101816).
- i40evf: Fix link up issue when queues are disabled (bsc#1101816).
- i40evf: Fix link up issue when queues are disabled (bsc#1101816).
- i40evf: Fix turning TSO, GSO and GRO on after (bsc#1101816).
- i40evf: Fix turning TSO, GSO and GRO on after (bsc#1101816).
- i40evf: Make VF reset warning message more clear (bsc#1101816).
- i40evf: Make VF reset warning message more clear (bsc#1101816).
- i40evf: Replace GFP_ATOMIC with GFP_KERNEL in i40evf_add_vlan
(bsc#1101816).
- i40evf: Replace GFP_ATOMIC with GFP_KERNEL in i40evf_add_vlan
(bsc#1101816).
- i40evf: Use an iterator of the same type as the list (bsc#1101816).
- i40evf: Use an iterator of the same type as the list (bsc#1101816).
- i40evf: enable support for VF VLAN tag stripping control (bsc#1101816).
- i40evf: enable support for VF VLAN tag stripping control (bsc#1101816).
- i40evf: fix client notify of l2 params (bsc#1101816).
- i40evf: fix client notify of l2 params (bsc#1101816).
- i40evf: fix ring to vector mapping (bsc#1101816).
- i40evf: fix ring to vector mapping (bsc#1101816).
- i40evf: hold the critical task bit lock while opening (bsc#1101816).
- i40evf: hold the critical task bit lock while opening (bsc#1101816).
- i40evf: lower message level (bsc#1101816).
- i40evf: lower message level (bsc#1101816).
- i40evf: release bit locks in reverse order (bsc#1101816).
- i40evf: release bit locks in reverse order (bsc#1101816).
- i40evf: remove flags that are never used (bsc#1101816).
- i40evf: remove flags that are never used (bsc#1101816).
- i40evf: remove flush_scheduled_work call in i40evf_remove (bsc#1101816).
- i40evf: remove flush_scheduled_work call in i40evf_remove (bsc#1101816).
- i40evf: use GFP_ATOMIC under spin lock (bsc#1101816).
- i40evf: use GFP_ATOMIC under spin lock (bsc#1101816).
- i40evf: use __dev_c_sync routines in .set_rx_mode (bsc#1101816).
- i40evf: use __dev_c_sync routines in .set_rx_mode (bsc#1101816).
- i40evf: use spinlock to protect (mac|vlan)_filter_list (bsc#1101816).
- i40evf: use spinlock to protect (mac|vlan)_filter_list (bsc#1101816).
- i40iw: Fix memory leak in error path of create QP (bsc#1058659).
- i40iw: Fix memory leak in error path of create QP (bsc#1058659).
- i40iw: Refactor of driver generated AEs (bsc#1058659).
- i40iw: Refactor of driver generated AEs (bsc#1058659).
- i40iw: Tear-down connection after CQP Modify QP failure (bsc#1058659).
- i40iw: Tear-down connection after CQP Modify QP failure (bsc#1058659).
- i40iw: Use correct address in dst_neigh_lookup for IPv6 (bsc#1058659).
- i40iw: Use correct address in dst_neigh_lookup for IPv6 (bsc#1058659).
- ib/core: Fix error code for invalid GID entry (bsc#1046306).
- ib/core: Fix error code for invalid GID entry (bsc#1046306).
- ib/core: Honor port_num while resolving GID for ib link layer
(bsc#1046306).
- ib/core: Honor port_num while resolving GID for ib link layer
(bsc#1046306).
- ib/core: Make ib_mad_client_id atomic (bsc#1046306).
- ib/core: Make ib_mad_client_id atomic (bsc#1046306).
- ib/core: Make testing MR flags for writability a static inline function
(bsc#1046306).
- ib/core: Make testing MR flags for writability a static inline function
(bsc#1046306).
- ib/core: Remove duplicate declaration of gid_cache_wq (bsc#1046306).
- ib/core: Remove duplicate declaration of gid_cache_wq (bsc#1046306).
- ib/hfi1: Add bypass register defines and replace blind constants
(bsc#1060463).
- ib/hfi1: Add bypass register defines and replace blind constants
(bsc#1060463).
- ib/hfi1: Fix fault injection init/exit issues (bsc#1060463).
- ib/hfi1: Fix fault injection init/exit issues (bsc#1060463).
- ib/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values
(bsc#1060463).
- ib/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values
(bsc#1060463).
- ib/hfi1: Fix user context tail allocation for DMA_RTAIL (bsc#1060463).
- ib/hfi1: Fix user context tail allocation for DMA_RTAIL (bsc#1060463).
- ib/hfi1: Return actual error value from program_rcvarray()
(bsc#1060463).
- ib/hfi1: Return actual error value from program_rcvarray() (bsc#1060463).
- ib/iser: Do not reduce max_sectors (bsc#1046306).
- ib/iser: Do not reduce max_sectors (bsc#1046306).
- ib/isert: Fix for lib/dma_debug check_sync warning (bsc#1046306).
- ib/isert: Fix for lib/dma_debug check_sync warning (bsc#1046306).
- ib/isert: fix T10-pi check mask setting (bsc#1046306).
- ib/isert: fix T10-pi check mask setting (bsc#1046306).
- ib/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
(bsc#1046302).
- ib/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
(bsc#1046302).
- ib/mlx4: Mark user MR as writable if actual virtual memory is writable
(bsc#1046302).
- ib/mlx4: Mark user MR as writable if actual virtual memory is writable
(bsc#1046302).
- ib/mlx5: Fetch soft WQE's on fatal error state (bsc#1046305).
- ib/mlx5: Fetch soft WQE's on fatal error state (bsc#1046305).
- ib/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'
(bsc#1046305).
- ib/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()'
(bsc#1046305).
- ib/qedr: Remove GID add/del dummy routines (bsc#1086314 bsc#1086313
bsc#1086301).
- ib/qedr: Remove GID add/del dummy routines (bsc#1086314 bsc#1086313
bsc#1086301).
- ib/rxe: Fix for oops in rxe_register_device on ppc64le arch
(bsc#1046306).
- ib/rxe: Fix for oops in rxe_register_device on ppc64le arch
(bsc#1046306).
- ib/rxe: add RXE_START_MASK for rxe_opcode ib_OPCODE_RC_SEND_ONLY_INV
(bsc#1046306).
- ib/rxe: add RXE_START_MASK for rxe_opcode ib_OPCODE_RC_SEND_ONLY_INV
(bsc#1046306).
- ib/rxe: avoid double kfree_skb (bsc#1046306).
- ib/rxe: avoid double kfree_skb (bsc#1046306).
- ib/umem: Use the correct mm during ib_umem_release (bsc#1046306).
- ib/umem: Use the correct mm during ib_umem_release (bsc#1046306).
- ib/uverbs: Fix possible oops with duplicate ioctl attributes
(bsc#1046306).
- ib/uverbs: Fix possible oops with duplicate ioctl attributes
(bsc#1046306).
- ibmvnic: Fix error recovery on login failure (bsc#1101789).
- igb: Fix not adding filter elements to the list (bsc#1056651).
- igb: Fix not adding filter elements to the list (bsc#1056651).
- igb: Fix queue selection on MAC filters on i210 (bsc#1056651).
- igb: Fix queue selection on MAC filters on i210 (bsc#1056651).
- iio: BME280: Updates to Humidity readings need ctrl_reg write!
(bsc#1051510).
- iio: accel: st_accel: fix data-ready line configuration (bsc#1051510).
- iio: accel: st_accel_i2c: fix i2c_device_id table (bsc#1051510).
- iio: accel: st_accel_spi: fix spi_device_id table (bsc#1051510).
- iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable
(bsc#1051510).
- iio: adc: twl4030: Return an error if we can not enable the vusb3v1
regulator in 'twl4030_madc_probe()' (bsc#1051510).
- iio: gyro: st_gyro: fix L3GD20H support (bsc#1051510).
- iio: humidity: hts221: remove warnings in
hts221_parse_{temp,rh}_caldata() (bsc#1051510).
- iio: imu: inv_mpu6050: test whoami first and against all known values
(bsc#1051510).
- iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
(bsc#1051510).
- iio: magnetometer: st_magn_core: enable multiread by default for LIS3MDL
(bsc#1051510).
- iio: magnetometer: st_magn_spi: fix spi_device_id table (bsc#1051510).
- iio: pressure: bmp280: fix relative humidity unit (bsc#1051510).
- iio: pressure: st_pressure: fix drdy configuration for LPS22HB and
LPS25H (bsc#1051510).
- iio: pressure: zpa2326: Remove always-true check which confuses gcc
(bsc#1051510).
- iio: pressure: zpa2326: report interrupted case as failure (bsc#1051510).
- iio: trigger: stm32-timer: fix quadrature mode get routine (bsc#1051510).
- iio: trigger: stm32-timer: fix write_raw return value (bsc#1051510).
- iio: tsl2583: correct values in integration_time_available (bsc#1051510).
- infiniband: fix a possible use-after-free bug (bsc#1046306).
- infiniband: fix a possible use-after-free bug (bsc#1046306).
- iommu/vt-d: Clear Page Request Overflow fault bit ().
- iommu/vt-d: Clear Page Request Overflow fault bit ().
- ip6_tunnel: remove magic mtu value 0xFFF8 (networking-stable-18_06_08).
- ipc/shm: fix use-after-free of shm file via remap_file_pages()
(bnc#1102512).
- ipmr: properly check rhltable_init() return value
(networking-stable-18_06_08).
- ipv4: remove warning in ip_recv_error (networking-stable-18_06_08).
- ipv6: allow pmTU exceptions to local routes (networking-stable-18_06_20).
- ipv6: sr: fix memory OOB access in seg6_do_srh_encap/inline
(networking-stable-18_06_08).
- iw_cxgb4: Add ib_device->get_netdev support (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- iw_cxgb4: correctly enforce the max reg_mr depth (bsc#1046543).
- iw_cxgb4: correctly enforce the max reg_mr depth (bsc#1046543).
- iw_cxgb4: initialize ib_mr fields for user mrs (bsc#1097585 bsc#1097586
bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- ixgbe/fm10k: Record macvlan stats instead of Rx queue for macvlan
offloaded rings (bsc#1101674).
- ixgbe/fm10k: Record macvlan stats instead of Rx queue for macvlan
offloaded rings (bsc#1101674).
- ixgbe/ixgbevf: Free IRQ when pci error recovery removes the device
(bsc#1101674).
- ixgbe/ixgbevf: Free IRQ when pci error recovery removes the device
(bsc#1101674).
- ixgbe: Add receive length error counter (bsc#1101674).
- ixgbe: Add receive length error counter (bsc#1101674).
- ixgbe: Add support for macvlan offload RSS on X550 and clean-up pool
handling (bsc#1101674).
- ixgbe: Add support for macvlan offload RSS on X550 and clean-up pool
handling (bsc#1101674).
- ixgbe: Assume provided MAC filter has been verified by macvlan
(bsc#1101674).
- ixgbe: Assume provided MAC filter has been verified by macvlan
(bsc#1101674).
- ixgbe: Avoid to write the RETA table when unnecessary (bsc#1101674).
- ixgbe: Avoid to write the RETA table when unnecessary (bsc#1101674).
- ixgbe: Clear SWFW_SYNC register during init (bsc#1101674).
- ixgbe: Clear SWFW_SYNC register during init (bsc#1101674).
- ixgbe: Default to 1 pool always being allocated (bsc#1101674).
- ixgbe: Default to 1 pool always being allocated (bsc#1101674).
- ixgbe: Do not assume dev->num_tc is equal to hardware TC config
(bsc#1101674).
- ixgbe: Do not assume dev->num_tc is equal to hardware TC config
(bsc#1101674).
- ixgbe: Do not manipulate macvlan Tx queues when performing macvlan
offload (bsc#1101674).
- ixgbe: Do not manipulate macvlan Tx queues when performing macvlan
offload (bsc#1101674).
- ixgbe: Do not report unsupported timestamping filters for X550
(bsc#1101674).
- ixgbe: Do not report unsupported timestamping filters for X550
(bsc#1101674).
- ixgbe: Drop l2_accel_priv data pointer from ring struct (bsc#1101674).
- ixgbe: Drop l2_accel_priv data pointer from ring struct (bsc#1101674).
- ixgbe: Drop support for macvlan specific unicast lists (bsc#1101674).
- ixgbe: Drop support for macvlan specific unicast lists (bsc#1101674).
- ixgbe: Fix && vs || typo (bsc#1101674).
- ixgbe: Fix handling of macvlan Tx offload (bsc#1101674).
- ixgbe: Fix handling of macvlan Tx offload (bsc#1101674).
- ixgbe: Fix interaction between SR-IOV and macvlan offload (bsc#1101674).
- ixgbe: Fix interaction between SR-IOV and macvlan offload (bsc#1101674).
- ixgbe: Fix kernel-doc format warnings (bsc#1101674).
- ixgbe: Fix kernel-doc format warnings (bsc#1101674).
- ixgbe: Fix limitations on macvlan so we can support up to 63 offloaded
devices (bsc#1101674).
- ixgbe: Fix limitations on macvlan so we can support up to 63 offloaded
devices (bsc#1101674).
- ixgbe: Fix logic operator typo (bsc#1101674).
- ixgbe: Fix setting of TC configuration for macvlan case (bsc#1101674).
- ixgbe: Fix setting of TC configuration for macvlan case (bsc#1101674).
- ixgbe: Perform reinit any time number of VFs change (bsc#1101674).
- ixgbe: Perform reinit any time number of VFs change (bsc#1101674).
- ixgbe: Remove an obsolete comment about ITR (bsc#1101674).
- ixgbe: Remove an obsolete comment about ITR (bsc#1101674).
- ixgbe: There is no need to update num_rx_pools in L2 fwd offload
(bsc#1101674).
- ixgbe: There is no need to update num_rx_pools in L2 fwd offload
(bsc#1101674).
- ixgbe: Update adaptive ITR algorithm (bsc#1101674).
- ixgbe: Update adaptive ITR algorithm (bsc#1101674).
- ixgbe: Use ring values to test for Tx pending (bsc#1101674).
- ixgbe: Use ring values to test for Tx pending (bsc#1101674).
- ixgbe: add counter for times Rx pages gets allocated, not recycled
(bsc#1101674).
- ixgbe: add counter for times Rx pages gets allocated, not recycled
(bsc#1101674).
- ixgbe: add error checks when initializing the PHY (bsc#1101674).
- ixgbe: add error checks when initializing the PHY (bsc#1101674).
- ixgbe: add status reg reads to ixgbe_check_remove (bsc#1101674).
- ixgbe: add status reg reads to ixgbe_check_remove (bsc#1101674).
- ixgbe: add support for reporting 5G link speed (bsc#1101674).
- ixgbe: add support for reporting 5G link speed (bsc#1101674).
- ixgbe: advertise highest capable link speed (bsc#1101674).
- ixgbe: advertise highest capable link speed (bsc#1101674).
- ixgbe: avoid bringing rings up/down as macvlans are added/removed
(bsc#1101674).
- ixgbe: avoid bringing rings up/down as macvlans are added/removed
(bsc#1101674).
- ixgbe: declare ixgbe_mac_operations structures as const (bsc#1101674).
- ixgbe: declare ixgbe_mac_operations structures as const (bsc#1101674).
- ixgbe: enable multicast on shutdown for WOL (bsc#1101674).
- ixgbe: enable multicast on shutdown for WOL (bsc#1101674).
- ixgbe: extend firmware version support (bsc#1101674).
- ixgbe: extend firmware version support (bsc#1101674).
- ixgbe: fix crash when injecting AER after failed reset (bsc#1101674).
- ixgbe: fix crash when injecting AER after failed reset (bsc#1101674).
- ixgbe: fix disabling hide VLAN on VF reset (bsc#1101674).
- ixgbe: fix disabling hide VLAN on VF reset (bsc#1101674).
- ixgbe: fix possible race in reset subtask (bsc#1101674).
- ixgbe: fix possible race in reset subtask (bsc#1101674).
- ixgbe: fix read-modify-write in x550 phy setup (bsc#1101674).
- ixgbe: fix read-modify-write in x550 phy setup (bsc#1101674).
- ixgbe: fix the FWSM.PT check in ixgbe_mng_present() (bsc#1101674).
- ixgbe: fix the FWSM.PT check in ixgbe_mng_present() (bsc#1101674).
- ixgbe: force VF to grab new MAC on driver reload (bsc#1101674).
- ixgbe: force VF to grab new MAC on driver reload (bsc#1101674).
- ixgbe: introduce a helper to simplify code (bsc#1101674).
- ixgbe: introduce a helper to simplify code (bsc#1101674).
- ixgbe: remove redundant initialization of 'pool' (bsc#1101674).
- ixgbe: remove redundant initialization of 'pool' (bsc#1101674).
- ixgbe: remove unused enum latency_range (bsc#1101674).
- ixgbe: remove unused enum latency_range (bsc#1101674).
- ixgbe: restore normal RSS after last macvlan offload is removed
(bsc#1101674).
- ixgbe: restore normal RSS after last macvlan offload is removed
(bsc#1101674).
- ixgbe: return error on unsupported SFP module when resetting
(bsc#1101674).
- ixgbe: return error on unsupported SFP module when resetting
(bsc#1101674).
- ixgbe: split Tx/Rx ring clearing for ethtool loopback test
(bsc#1101674).
- ixgbe: split Tx/Rx ring clearing for ethtool loopback test (bsc#1101674).
- ixgbe: use ARRAY_SIZE for array sizing calculation on array buf
(bsc#1101674).
- ixgbe: use ARRAY_SIZE for array sizing calculation on array buf
(bsc#1101674).
- ixgbevf: Fix kernel-doc format warnings (bsc#1101674).
- ixgbevf: Fix kernel-doc format warnings (bsc#1101674).
- ixgbevf: add build_skb support (bsc#1101674).
- ixgbevf: add build_skb support (bsc#1101674).
- ixgbevf: add counters for Rx page allocations (bsc#1101674).
- ixgbevf: add counters for Rx page allocations (bsc#1101674).
- ixgbevf: add ethtool private flag for legacy Rx (bsc#1101674).
- ixgbevf: add ethtool private flag for legacy Rx (bsc#1101674).
- ixgbevf: add function for checking if we can reuse page (bsc#1101674).
- ixgbevf: add function for checking if we can reuse page (bsc#1101674).
- ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING
(bsc#1101674).
- ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING
(bsc#1101674).
- ixgbevf: add support for padding packet (bsc#1101674).
- ixgbevf: add support for padding packet (bsc#1101674).
- ixgbevf: add support for using order 1 pages to receive large frames
(bsc#1101674).
- ixgbevf: add support for using order 1 pages to receive large frames
(bsc#1101674).
- ixgbevf: allocate the rings as part of q_vector (bsc#1101674).
- ixgbevf: allocate the rings as part of q_vector (bsc#1101674).
- ixgbevf: break out Rx buffer page management (bsc#1101674).
- ixgbevf: break out Rx buffer page management (bsc#1101674).
- ixgbevf: clear rx_buffer_info in configure instead of clean
(bsc#1101674).
- ixgbevf: clear rx_buffer_info in configure instead of clean
(bsc#1101674).
- ixgbevf: do not bother clearing tx_buffer_info in
ixgbevf_clean_tx_ring() (bsc#1101674).
- ixgbevf: do not bother clearing tx_buffer_info in
ixgbevf_clean_tx_ring() (bsc#1101674).
- ixgbevf: fix MAC address changes through ixgbevf_set_mac()
(bsc#1101674).
- ixgbevf: fix MAC address changes through ixgbevf_set_mac() (bsc#1101674).
- ixgbevf: fix ixgbevf_xmit_frame()'s return type (bsc#1101674).
- ixgbevf: fix ixgbevf_xmit_frame()'s return type (bsc#1101674).
- ixgbevf: fix possible race in the reset subtask (bsc#1101674).
- ixgbevf: fix possible race in the reset subtask (bsc#1101674).
- ixgbevf: fix unused variable warning (bsc#1101674).
- ixgbevf: fix unused variable warning (bsc#1101674).
- ixgbevf: improve performance and reduce size of ixgbevf_tx_map()
(bsc#1101674).
- ixgbevf: improve performance and reduce size of ixgbevf_tx_map()
(bsc#1101674).
- ixgbevf: make sure all frames fit minimum size requirements
(bsc#1101674).
- ixgbevf: make sure all frames fit minimum size requirements
(bsc#1101674).
- ixgbevf: only DMA sync frame length (bsc#1101674).
- ixgbevf: only DMA sync frame length (bsc#1101674).
- ixgbevf: remove redundant initialization of variable 'dma'
(bsc#1101674).
- ixgbevf: remove redundant initialization of variable 'dma' (bsc#1101674).
- ixgbevf: remove redundant setting of xcast_mode (bsc#1101674).
- ixgbevf: remove redundant setting of xcast_mode (bsc#1101674).
- ixgbevf: setup queue counts (bsc#1101674).
- ixgbevf: setup queue counts (bsc#1101674).
- ixgbevf: update code to better handle incrementing page count
(bsc#1101674).
- ixgbevf: update code to better handle incrementing page count
(bsc#1101674).
- ixgbevf: use ARRAY_SIZE for various array sizing calculations
(bsc#1101674).
- ixgbevf: use ARRAY_SIZE for various array sizing calculations
(bsc#1101674).
- ixgbevf: use length to determine if descriptor is done (bsc#1101674).
- ixgbevf: use length to determine if descriptor is done (bsc#1101674).
- ixgbevf: use page_address offset from page (bsc#1101674).
- ixgbevf: use page_address offset from page (bsc#1101674).
- jump_label: Add branch hints to static_branch_{un,}likely() (bnc#1101669
optimise numa balancing for fast migrate).
- kABI: fixes for nvme (bsc#1077989).
- kABI: fixes for qla2xxx (bsc#1077989).
- kabi mlx5 hide cpu_rmap (bsc#1046303).
- kabi/severities: add qed inter module symbols to kabi ignore list
- kabi: breakage for of/device change (bsc#1051510).
- kabi: cxgb4 MU (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588
bsc#1097583 bsc#1097584).
- kabi: due to perf_event.h uapi field change ().
- kabi: for rtl_deinit_deferred_work() rewrite (bsc#1051510).
- kabi: mlx5 hide cpu_rmap (bsc#1046303).
- kabi: mvpp2 10gkr support (bsc#1098633).
- kabi: powerpc: mmu_context: provide old version of mm_iommu_ua_to_hpa
(bsc#1077761, git-fixes).
- kabi: protect fwnode_handle (bsc#1098633).
- kcm: Fix use-after-free caused by clonned sockets
(networking-stable-18_06_08).
- kernel/params.c: downgrade warning for unsafe parameters (bsc#1051510).
- keys: DNS: fix parsing multiple options (bsc#1051510).
- kvm: PPC: Check if IOMMU page is contained in the pinned physical page
(bsc#1077761, git-fixes).
- kvm: x86: fix vcpu initialization with userspace lapic (bsc#1101564).
- kvm: x86: move LAPIC initialization after VMCS creation (bsc#1101564).
- libnvdimm, label: fix index block size calculation (bsc#1102147).
- libnvdimm: add an api to cast a 'struct nd_region' to its 'struct
device' (bsc#1094119).
- mailbox: PCC: erroneous error message when parsing ACPI PCCT
(bsc#1096330).
- mailbox: bcm2835: Fix of_xlate return value (bsc#1051510).
- mdio-sun4i: Fix a memory leak (bsc#1051510).
- media: coda/imx-vdoa: Check for platform_get_resource() error
(bsc#1051510).
- media: cx25840: Use subdev host data for PLL override (bsc#1051510).
- media: cx88: Get rid of spurious call to cx8800_start_vbi_dma()
(bsc#1051510).
- media: cxusb: restore RC_MAP for MyGica T230 (bsc#1051510).
- media: dt-bindings: media: rcar_vin: Use status "okay" (bsc#1051510).
- media: dvb-core: always call invoke_release() in fe_free() (bsc#1051510).
- media: dvb_frontend: fix ifnullfree.cocci warnings (bsc#1051510).
- media: dvb_frontend: only use kref after initialized (bsc#1051510).
- media: dvb_net: ensure that dvb_net_ule_handle is fully initialized
(bsc#1051510).
- media: mxl111sf: Fix potential null pointer dereference (bsc#1051510).
- media: omap3isp/isp: remove an unused static var (bsc#1051510).
- media: s5p-jpeg: fix number of components macro (bsc#1051510).
- media: s5p-mfc: Fix lock contention - request_firmware() once
(bsc#1051510).
- media: staging: omap4iss: Include asm/cacheflush.h after generic
includes (bsc#1051510).
- media: vivid: potential integer overflow in vidioc_g_edid()
(bsc#1051510).
- mfd: tps65218: Reorder tps65218_regulator_id enum (bsc#1051510).
- mfd: tps65911-comparator: Fix a build error (bsc#1051510).
- mfd: tps65911-comparator: Fix an off by one bug (bsc#1051510).
- mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG
(networking-stable-18_06_08).
- mmc: cavium: Fix use-after-free in of_platform_device_destroy
(bsc#1051510).
- mmc: dw_mmc: fix card threshold control configuration (bsc#1051510).
- mmc: meson-gx: remove CLK_DIVIDER_ALLOW_ZERO clock flag (bsc#1051510).
- mmc: sdhci-msm: fix issue with power irq (bsc#1051510).
- mmc: sdhci-of-esdhc: disable SD clock for clock value 0 (bsc#1051510).
- mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec (bsc#1051510).
- mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardb
(bsc#1051510).
- mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock
(bsc#1051510).
- mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable (bsc#1051510).
- mmc: tmio: remove outdated comment (bsc#1051510).
- modsign: log module name in the event of an error (bsc#1093666).
- modsign: print module name along with error message (bsc#1093666).
- module: make it clear when we're handling the module copy in info->hdr
(bsc#1093666).
- module: setup load info before module_sig_check() (bsc#1093666).
- mvpp2: fix multicast address filter (bsc#1098633).
- net-sysfs: Fix memory leak in XPS configuration
(networking-stable-18_06_08).
- net/mlx4: Fix irq-unsafe spinlock usage (networking-stable-18_06_08).
- net/mlx4_core: Fix error handling in mlx4_init_port_info (bsc#1046300).
- net/mlx4_core: Fix error handling in mlx4_init_port_info (bsc#1046300).
- net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
(bsc#1046300).
- net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
(bsc#1046300).
- net/mlx4_en: Do not reuse RX page when XDP is set (bsc#1046299).
- net/mlx4_en: Do not reuse RX page when XDP is set (bsc#1046299).
- net/mlx5: Adjust clock overflow work period (bsc#1046303).
- net/mlx5: Adjust clock overflow work period (bsc#1046303).
- net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'
(bsc#1046303).
- net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()'
(bsc#1046303).
- net/mlx5: FPGA, Call DMA unmap with the right size (bsc#1046303).
- net/mlx5: FPGA, Call DMA unmap with the right size (bsc#1046303).
- net/mlx5: Fix command interface race in polling mode (bsc#1046300).
- net/mlx5: Fix command interface race in polling mode (bsc#1046300).
- net/mlx5: Fix dump_command mailbox length printed (bsc#1046303).
- net/mlx5: Fix dump_command mailbox length printed (bsc#1046303).
- net/mlx5: Fix incorrect raw command length parsing (bsc#1046300).
- net/mlx5: Fix incorrect raw command length parsing (bsc#1046300).
- net/mlx5: Fix wrong size allocation for QoS ETC TC regitster
(bsc#1046300).
- net/mlx5: Fix wrong size allocation for QoS ETC TC regitster
(bsc#1046300).
- net/mlx5: Free IRQs in shutdown path (bsc#1046303).
- net/mlx5: Free IRQs in shutdown path (bsc#1046303).
- net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
(bsc#1046303).
- net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
(bsc#1046303).
- net/mlx5: Properly deal with flow counters when deleting rules
(bsc#1046303).
- net/mlx5: Properly deal with flow counters when deleting rules
(bsc#1046303).
- net/mlx5: Protect from command bit overflow (bsc#1046303).
- net/mlx5: Protect from command bit overflow (bsc#1046303).
- net/mlx5: Refactor num of blocks in mailbox calculation (bsc#1046303).
- net/mlx5: Refactor num of blocks in mailbox calculation (bsc#1046303).
- net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
(bsc#1046303).
- net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
(bsc#1046303).
- net/mlx5e: Do not allow aRFS for encapsulated packets (bsc#1046303).
- net/mlx5e: Do not allow aRFS for encapsulated packets (bsc#1046303).
- net/mlx5e: Do not attempt to dereference the ppriv struct if not being
eswitch manager (bsc#1046300).
- net/mlx5e: Do not attempt to dereference the ppriv struct if not being
eswitch manager (bsc#1046300).
- net/mlx5e: Fix quota counting in aRFS expire flow (bsc#1046303).
- net/mlx5e: Fix quota counting in aRFS expire flow (bsc#1046303).
- net/mlx5e: Refine ets validation function (bsc#1075360).
- net/mlx5e: Remove redundant vport context vlan update (bsc#1046303).
- net/mlx5e: Remove redundant vport context vlan update (bsc#1046303).
- net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
(networking-stable-18_06_08).
- net/packet: refine check for priv area size (networking-stable-18_06_08).
- net/sched: act_simple: fix parsing of TCA_DEF_DATA
(networking-stable-18_06_20).
- net/sched: act_tunnel_key: fix NULL dereference when 'goto chain' is
used (bsc#1056787).
- net/sched: fix NULL dereference in the error path of tcf_sample_init()
(bsc#1056787).
- net: add rb_to_skb() and other rb tree helpers (bsc#1102340).
- net: cxgb3_main: fix potential Spectre v1 (bsc#1046533).
- net: cxgb3_main: fix potential Spectre v1 (bsc#1046533).
- net: define the TSO header size in net/tso.h (bsc#1098633).
- net: dsa: add error handling for pskb_trim_rcsum
(networking-stable-18_06_20).
- net: ethernet: davinci_emac: fix error handling in probe()
(networking-stable-18_06_08).
- net: ethernet: ti: cpdma: correct error handling for chan create
(networking-stable-18_06_08).
- net: ethtool: Add macro to clear a link mode setting (bsc#1101816).
- net: ethtool: Add macro to clear a link mode setting (bsc#1101816).
- net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds
vlan (networking-stable-18_06_20).
- net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
(networking-stable-18_06_08).
- net: metrics: add proper netlink validation (networking-stable-18_06_08).
- net: mvmdio: add xmdio xsmi support (bsc#1098633).
- net: mvmdio: check the MII_ADDR_C45 bit is not set for smi operations
(bsc#1098633).
- net: mvmdio: introduce an ops structure (bsc#1098633).
- net: mvmdio: put the poll intervals in the ops structure (bsc#1098633).
- net: mvmdio: remove duplicate locking (bsc#1098633).
- net: mvmdio: reorder headers alphabetically (bsc#1098633).
- net: mvmdio: simplify the smi read and write error paths (bsc#1098633).
- net: mvmdio: use GENMASK for masks (bsc#1098633).
- net: mvmdio: use tabs for defines (bsc#1098633).
- net: mvpp2: Add hardware offloading for VLAN filtering (bsc#1098633).
- net: mvpp2: Add support for unicast filtering (bsc#1098633).
- net: mvpp2: Do not use dynamic allocs for local variables (bsc#1098633).
- net: mvpp2: Fix DMA address mask size (bsc#1098633).
- net: mvpp2: Fix TCAM filter reserved range (bsc#1098633).
- net: mvpp2: Fix clk error path in mvpp2_probe (bsc#1098633).
- net: mvpp2: Fix clock resource by adding an optional bus clock
(bsc#1098633).
- net: mvpp2: Fix clock resource by adding missing mg_core_clk
(bsc#1098633).
- net: mvpp2: Fix parser entry init boundary check (bsc#1098633).
- net: mvpp2: Make mvpp2_prs_hw_read a parser entry init function
(bsc#1098633).
- net: mvpp2: Prevent userspace from changing TX affinities (bsc#1098633).
- net: mvpp2: Simplify MAC filtering function parameters (bsc#1098633).
- net: mvpp2: Use relaxed I/O in data path (bsc#1098633).
- net: mvpp2: add comments about smp_processor_id() usage (bsc#1098633).
- net: mvpp2: add ethtool GOP statistics (bsc#1098633).
- net: mvpp2: add support for TX interrupts and RX queue distribution
modes (bsc#1098633).
- net: mvpp2: adjust the coalescing parameters (bsc#1098633).
- net: mvpp2: align values in ethtool get_coalesce (bsc#1098633).
- net: mvpp2: allocate zeroed tx descriptors (bsc#1098633).
- net: mvpp2: check ethtool sets the Tx ring size is to a valid min value
(bsc#1098633).
- net: mvpp2: cleanup probed ports in the probe error path (bsc#1098633).
- net: mvpp2: do not call txq_done from the Tx path when Tx irqs are used
(bsc#1098633).
- net: mvpp2: do not disable GMAC padding (bsc#1098633).
- net: mvpp2: do not select the internal source clock (bsc#1098633).
- net: mvpp2: do not set GMAC autoneg when using XLG MAC (bsc#1098633).
- net: mvpp2: do not sleep in set_rx_mode (bsc#1098633).
- net: mvpp2: do not unmap TSO headers buffers (bsc#1098633).
- net: mvpp2: dynamic reconfiguration of the comphy/GoP/MAC (bsc#1098633).
- net: mvpp2: enable ACPI support in the driver (bsc#1098633).
- net: mvpp2: enable UDP/TCP checksum over IPv6 (bsc#1098633).
- net: mvpp2: enable basic 10G support (bsc#1098633).
- net: mvpp2: fallback using h/w and random mac if the dt one isn't valid
(bsc#1098633).
- net: mvpp2: fix GOP statistics loop start and stop conditions
(bsc#1098633).
- net: mvpp2: fix MVPP21_ISR_RXQ_GROUP_REG definition (bsc#1098633).
- net: mvpp2: fix TSO headers allocation and management (bsc#1098633).
- net: mvpp2: fix invalid parameters order when calling the tcam init
(bsc#1098633).
- net: mvpp2: fix parsing fragmentation detection (bsc#1098633).
- net: mvpp2: fix port list indexing (bsc#1098633).
- net: mvpp2: fix the RSS table entry offset (bsc#1098633).
- net: mvpp2: fix the packet size configuration for 10G (bsc#1098633).
- net: mvpp2: fix the synchronization module bypass macro name
(bsc#1098633).
- net: mvpp2: fix the txq_init error path (bsc#1098633).
- net: mvpp2: fix typo in the tcam setup (bsc#1098633).
- net: mvpp2: fix use of the random mac address for PPv2.2 (bsc#1098633).
- net: mvpp2: improve the link management function (bsc#1098633).
- net: mvpp2: initialize the GMAC when using a port (bsc#1098633).
- net: mvpp2: initialize the GoP (bsc#1098633).
- net: mvpp2: initialize the RSS tables (bsc#1098633).
- net: mvpp2: initialize the Tx FIFO size (bsc#1098633).
- net: mvpp2: initialize the XLG MAC when using a port (bsc#1098633).
- net: mvpp2: initialize the comphy (bsc#1098633).
- net: mvpp2: introduce per-port nrxqs/ntxqs variables (bsc#1098633).
- net: mvpp2: introduce queue_vector concept (bsc#1098633).
- net: mvpp2: jumbo frames support (bsc#1098633).
- net: mvpp2: limit TSO segments and use stop/wake thresholds
(bsc#1098633).
- net: mvpp2: make the phy optional (bsc#1098633).
- net: mvpp2: move from cpu-centric naming to "software thread" naming
(bsc#1098633).
- net: mvpp2: move the mac retrieval/copy logic into its own function
(bsc#1098633).
- net: mvpp2: move the mii configuration in the ndo_open path
(bsc#1098633).
- net: mvpp2: mvpp2_check_hw_buf_num() can be static (bsc#1098633).
- net: mvpp2: only free the TSO header buffers when it was allocated
(bsc#1098633).
- net: mvpp2: remove RX queue group reset code (bsc#1098633).
- net: mvpp2: remove mvpp2_pool_refill() (bsc#1098633).
- net: mvpp2: remove unused mvpp2_bm_cookie_pool_set() function
(bsc#1098633).
- net: mvpp2: remove useless goto (bsc#1098633).
- net: mvpp2: report the tx-usec coalescing information to ethtool
(bsc#1098633).
- net: mvpp2: set maximum packet size for 10G ports (bsc#1098633).
- net: mvpp2: set the Rx FIFO size depending on the port speeds for PPv2.2
(bsc#1098633).
- net: mvpp2: simplify maintaining enabled ports' list (bsc#1098633).
- net: mvpp2: simplify the Tx desc set DMA logic (bsc#1098633).
- net: mvpp2: simplify the link_event function (bsc#1098633).
- net: mvpp2: software tso support (bsc#1098633).
- net: mvpp2: split the max ring size from the default one (bsc#1098633).
- net: mvpp2: take advantage of the is_rgmii helper (bsc#1098633).
- net: mvpp2: unify register definitions coding style (bsc#1098633).
- net: mvpp2: unify the txq size define use (bsc#1098633).
- net: mvpp2: update the BM buffer free/destroy logic (bsc#1098633).
- net: mvpp2: use a data size of 10kB for Tx FIFO on port 0 (bsc#1098633).
- net: mvpp2: use correct index on array mvpp2_pools (bsc#1098633).
- net: mvpp2: use device_*/fwnode_* APIs instead of of_* (bsc#1098633).
- net: mvpp2: use the GoP interrupt for link status changes (bsc#1098633).
- net: mvpp2: use the aggr txq size define everywhere (bsc#1098633).
- net: mvpp2: use the same buffer pool for all ports (bsc#1098633).
- net: phy: add XAUI and 10GBASE-KR PHY connection types (bsc#1098633).
- net: phy: broadcom: Fix auxiliary control register reads
(networking-stable-18_06_08).
- net: phy: broadcom: Fix bcm_write_exp() (networking-stable-18_06_08).
- net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for
DP83620 (networking-stable-18_06_20).
- net: qed: use correct strncpy() size (bsc#1086314 bsc#1086313
bsc#1086301).
- net: qed: use correct strncpy() size (bsc#1086314 bsc#1086313
bsc#1086301).
- net: sched: red: avoid hashing NULL child (bsc#1056787).
- net: usb: cdc_mbim: add flag FLAG_SEND_ZLP (networking-stable-18_06_08).
- netdev-FAQ: clarify DaveM's position for stable backports
(networking-stable-18_06_08).
- nfc: nfcmrvl_uart: fix device-node leak during probe (bsc#1051510).
- nfc: pn533: Fix wrong GFP flag usage (bsc#1051510).
- nfit, address-range-scrub: add module option to skip initial ars
(bsc#1094119).
- nfit, address-range-scrub: determine one platform max_ars value
(bsc#1094119).
- nfit, address-range-scrub: fix scrub in-progress reporting (bsc#1051510).
- nfit, address-range-scrub: introduce nfit_spa->ars_state (bsc#1094119).
- nfit, address-range-scrub: rework and simplify ARS state machine
(bsc#1094119).
- nfit: fix region registration vs block-data-window ranges (bsc#1051510).
- nfit: fix unchecked dereference in acpi_nfit_ctl (bsc#1051510).
- nvme-loop: add support for multiple ports (bsc#1054245).
- nvme.h: add AEN configuration symbols (bsc#1054245).
- nvme.h: add ANA definitions (bsc#1054245).
- nvme.h: add support for the log specific field (bsc#1054245).
- nvme.h: add the changed namespace list log (bsc#1054245).
- nvme.h: untangle AEN notice definitions (bsc#1054245).
- nvme/multipath: Disable runtime writable enabling parameter
(bsc#1054245).
- nvme: Fix sync controller reset return (bsc#1077989).
- nvme: add ANA support (bsc#1054245).
- nvme: add bio remapping tracepoint (bsc#1054245).
- nvme: centralize ctrl removal prints (bsc#1054245).
- nvme: cleanup double shift issue (bsc#1054245).
- nvme: do not enable AEN if not supported (bsc#1077989).
- nvme: do not hold nvmf_transports_rwsem for more than transport lookups
(bsc#1054245).
- nvme: do not rely on the changed namespace list log (bsc#1054245).
- nvme: enforce 64bit offset for nvme_get_log_ext fn (bsc#1054245).
- nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD (,).
- nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD ().
- nvme: fix use-after-free in nvme_free_ns_head (bsc#1054245).
- nvme: guard additional fields in nvme command structures (bsc#1054245).
- nvme: host: core: fix precedence of ternary operator (bsc#1054245).
- nvme: if_ready checks to fail io to deleting controller (bsc#1077989).
- nvme: implement log page low/high offset and dwords (bsc#1054245).
- nvme: kABI fix for ANA support in nvme_ctrl (bsc#1054245).
- nvme: kABI fixes for nvmet_ctrl (bsc#1054245).
- nvme: kabi fixes for nvme_ctrl (bsc#1054245).
- nvme: make nvme_get_log_ext non-static (bsc#1054245).
- nvme: mark nvme_queue_scan static (bsc#1054245).
- nvme: partially revert "nvme: remove nvme_req_needs_failover"
(bsc#1054245).
- nvme: reintruduce nvme_get_log_ext() (bsc#1054245).
- nvme: remove nvme_req_needs_failover (bsc#1054245).
- nvme: revert "nvme: mark nvme_queue_scan static" (bsc#1054245).
- nvme: simplify the API for getting log pages (bsc#1054245).
- nvme: submit AEN event configuration on startup (bsc#1054245).
- nvme: use the changed namespaces list log to clear ns data changed AENs
(bsc#1054245).
- nvmet-fc: fix target sgl list on large transfers ().
- nvmet-fc: fix target sgl list on large transfers (,).
- nvmet: add AEN configuration support (bsc#1054245).
- nvmet: add a new nvmet_zero_sgl helper (bsc#1054245).
- nvmet: add minimal ANA support (bsc#1054245).
- nvmet: constify struct nvmet_fabrics_ops (bsc#1054245).
- nvmet: filter newlines from user input (bsc#1054245).
- nvmet: fixup crash on NULL device path (bsc#1054245).
- nvmet: implement the changed namespaces log (bsc#1054245).
- nvmet: kABI fixes for ANA support (bsc#1054245).
- nvmet: keep a port pointer in nvmet_ctrl (bsc#1054245).
- nvmet: mask pending AENs (bsc#1054245).
- nvmet: reset keep alive timer in controller enable (bsc#1054245).
- nvmet: return all zeroed buffer when we can't find an active namespace
(bsc#1054245).
- nvmet: revert 'nvmet: constify struct nvmet_fabrics_ops' (bsc#1054245).
- nvmet: split log page implementation (bsc#1054245).
- nvmet: support configuring ANA groups (bsc#1054245).
- nvmet: track and limit the number of namespaces per subsystem (1054245).
- nvmet: use Retain Async Event bit to clear AEN (bsc#1054245).
- of/pci: Fix theoretical NULL dereference (bsc#1051510).
- of: Make of_fwnode_handle() safer (bsc#1098633).
- of: fix DMA mask generation (bsc#1051510).
- of: restrict DMA configuration (bsc#1051510).
- pci: Account for all bridges on bus when distributing bus numbers
(bsc#1100132).
- pci: altera: Fix bool initialization in tlp_read_packet() (bsc#1051510).
- pci: dwc: Fix enumeration end when reaching root subordinate
(bsc#1100132).
- pci: endpoint: Fix kernel panic after put_device() (bsc#1051510).
- pci: endpoint: Populate func_no before calling pci_epc_add_epf()
(bsc#1051510).
- pci: exynos: Fix a potential init_clk_resources NULL pointer dereference
(bsc#1051510).
- pci: faraday: Fix of_irq_get() error check (bsc#1051510).
- pci: ibmphp: Fix use-before-set in get_max_bus_speed() (bsc#1051510).
- pci: shpchp: Fix AMD POGO identification (bsc#1051510).
- perf intel-pt: Always set no branch for dummy event (bsc#1087217).
- perf intel-pt: Set no_aux_samples for the tracking event (bsc#1087217).
- perf/x86/intel/uncore: Add event constraint for BDX PCU (bsc#1087202).
- perf/x86/intel/uncore: Fix SKX CHA event extra regs (bsc#1087233).
- perf/x86/intel/uncore: Fix Skylake UPI pmU event masks (bsc#1087233).
- perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask
(bsc#1087233).
- perf/x86/intel/uncore: Fix Skylake server PCU pmU event format
(bsc#1087233).
- perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs
(bsc#1087233).
- perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field
(bsc#1087233).
- perf/x86: Fix data source decoding for Skylake ().
- perf/x86: Fix data source decoding for Skylake ().
- phy: add sgmii and 10gkr modes to the phy_mode enum (bsc#1098633).
- pinctrl: bcm2835: Avoid warning from __irq_do_set_handler (bsc#1051510).
- pinctrl: imx: fix debug message for SHARE_MUX_CONF_REG case
(bsc#1051510).
- pinctrl: intel: Initialize GPIO properly when used through irqchip
(bsc#1087092).
- pinctrl: intel: Read back TX buffer state (bsc#1051510).
- pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 (bsc#1051510).
- pinctrl: meson-gxl: Fix typo in AO I2S pins (bsc#1051510).
- pinctrl: meson-gxl: Fix typo in AO SPDIF pins (bsc#1051510).
- pinctrl: mvebu: use correct MPP sel value for dev pins (bsc#1051510).
- pinctrl: nand: meson-gxbb: fix missing data pins (bsc#1051510).
- pinctrl: nsp: Fix potential NULL dereference (bsc#1051510).
- pinctrl: nsp: off by ones in nsp_pinmux_enable() (bsc#1100132).
- pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
(bsc#1051510).
- pinctrl: sh-pfc: r8a7790: Add missing TX_ER pin to avb_mii group
(bsc#1051510).
- pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for SSI
pins group (bsc#1051510).
- pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function
definitions (bsc#1051510).
- pinctrl: sh-pfc: r8a7796: Fix IPSR and MOD_SEL register pin assignment
for NDFC pins group (bsc#1051510).
- pinctrl: sh-pfc: r8a7796: Fix to delete A20..A25 pins function
definitions (bsc#1051510).
- pinctrl: sh-pfc: r8a7796: Fix to delete FSCLKST pin and IPSR7 bit[15:12]
register definitions (bsc#1051510).
- pinctrl: sunxi: fix V3s pinctrl driver IRQ bank base (bsc#1051510).
- pinctrl: sunxi: fix wrong irq_banks number for H5 pinctrl (bsc#1051510).
- pinctrl: uniphier: fix members of rmii group for Pro4 (bsc#1051510).
- pinctrl: uniphier: fix pin_config_get() for input-enable (bsc#1051510).
- pm/core: Fix supplier device runtime pm usage counter imbalance
(bsc#1051510).
- pm/hibernate: Fix oops at snapshot_write() (bsc#1051510).
- pm/hibernate: Use CONFIG_HAVE_SET_MEMORY for include condition
(bsc#1051510).
- pm/wakeup: Only update last time for active wakeup sources (bsc#1051510).
- power: gemini-poweroff: Avoid spurious poweroff (bsc#1051510).
- power: supply: act8945a_charger: fix of_irq_get() error check
(bsc#1051510).
- power: supply: cpcap-charger: add OMAP_usb2 dependency (bsc#1051510).
- powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently
(bnc#1012382).
- powerpc/64s: Clear PCR on boot (bnc#1012382).
- powerpc/64s: Fix section mismatch warnings from setup_rfi_flush()
(bsc#1068032, bsc#1075087, bsc#1091041).
- powerpc/eeh: Fix enabling bridge MMIO windows (bnc#1012382).
- powerpc/fadump: Unregister fadump on kexec down path (bnc#1012382).
- powerpc/mm/hash: Add missing isync prior to kernel stack SLB switch
(bnc#1012382).
- powerpc/mpic: Check if cpu_possible() in mpic_physmask() (bnc#1012382).
- powerpc/powernv: Fix NVRAM sleep in invalid context when crashing
(bnc#1012382).
- powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops (bnc#1012382).
- powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()
(bnc#1012382).
- powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
(bnc#1012382).
- powerpc/ptrace: Fix setting 512B aligned breakpoints with
PTRACE_SET_DEBUGREG (bnc#1012382).
- powerpc: Add missing prototype for arch_irq_work_raise() (bnc#1012382).
- pwm: meson: Fix allocation of PWM channel array (bsc#1051510).
- pwm: meson: Improve PWM calculation precision (bsc#1051510).
- pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERS (bsc#1051510).
- pwm: stm32: Remove unused struct device (bsc#1051510).
- pwm: tiehrpwm: Fix runtime pm imbalance at unbind (bsc#1051510).
- pwm: tiehrpwm: fix clock imbalance in probe error path (bsc#1051510).
- qed* : Add new TLV to request PF to update MAC in bulletin board
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed* : use trust mode to allow VF to override forced MAC (bsc#1086314
bsc#1086313 bsc#1086301).
- qed*: Add new TLV to request PF to update MAC in bulletin board
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: Advance drivers' version to 8.33.0.20 (bsc#1086314).
- qed*: Advance drivers' version to 8.33.0.20 (bsc#1086314).
- qed*: HSI renaming for different types of HW (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: HSI renaming for different types of HW (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Refactor mf_mode to consist of bits (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Refactor mf_mode to consist of bits (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Refactoring and rearranging FW API with no functional impact
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: Refactoring and rearranging FW API with no functional impact
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: Support drop action classification (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Support drop action classification (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Support other classification modes (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Support other classification modes (bsc#1086314 bsc#1086313
bsc#1086301).
- qed*: Utilize FW 8.33.1.0 (bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: Utilize FW 8.33.1.0 (bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: Utilize FW 8.33.11.0 (bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: Utilize FW 8.33.11.0 (bsc#1086314 bsc#1086313 bsc#1086301).
- qed*: use trust mode to allow VF to override forced MAC (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Adapter flash update support (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Adapter flash update support (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add APIs for flash access (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add APIs for flash access (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add MFW interfaces for TLV request support (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add MFW interfaces for TLV request support (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Add configuration information to register dump and debug data
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add configuration information to register dump and debug data
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add driver infrastucture for handling mfw requests (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add driver infrastucture for handling mfw requests (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add sanity check for SIMD fastpath handler (bsc#1050536).
- qed: Add sanity check for SIMD fastpath handler (bsc#1050536).
- qed: Add support for Unified Fabric Port (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Add support for Unified Fabric Port (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Add support for multi function mode with 802.1ad tagging
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add support for multi function mode with 802.1ad tagging
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Add support for processing fcoe tlv request (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add support for processing fcoe tlv request (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add support for processing iscsi tlv request (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add support for processing iscsi tlv request (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Add support for tlv request processing (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Add support for tlv request processing (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Correct Multicast API to reflect existence of 256 approximate
buckets (bsc#1050536).
- qed: Correct Multicast API to reflect existence of 256 approximate
buckets (bsc#1050536).
- qed: Delete unused parameter p_ptt from mcp APIs (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Delete unused parameter p_ptt from mcp APIs (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Do not advertise DCBX_LLD_MANAGED capability (bsc#1050536).
- qed: Do not advertise DCBX_LLD_MANAGED capability (bsc#1050536).
- qed: Fix LL2 race during connection terminate (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Fix LL2 race during connection terminate (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Fix PTT entry leak in the selftest error flow (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Fix PTT entry leak in the selftest error flow (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Fix copying 2 strings (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Fix copying 2 strings (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Fix link flap issue due to mismatching EEE capabilities
(bsc#1050536).
- qed: Fix link flap issue due to mismatching EEE capabilities
(bsc#1050536).
- qed: Fix mask for physical address in ILT entry
(networking-stable-18_06_08).
- qed: Fix possibility of list corruption during rmmod flows
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Fix possibility of list corruption during rmmod flows (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Fix possible memory leak in Rx error path handling (bsc#1050536).
- qed: Fix possible memory leak in Rx error path handling (bsc#1050536).
- qed: Fix possible race for the link state value (bsc#1050536).
- qed: Fix possible race for the link state value (bsc#1050536).
- qed: Fix potential use-after-free in qed_spq_post() (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Fix potential use-after-free in qed_spq_post() (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Fix reading stale configuration information (bsc#1086314).
- qed: Fix reading stale configuration information (bsc#1086314).
- qed: Fix setting of incorrect eswitch mode (bsc#1050536).
- qed: Fix setting of incorrect eswitch mode (bsc#1050536).
- qed: Fix shared memory inconsistency between driver and the MFW
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Fix shared memory inconsistency between driver and the MFW
(bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Fix use of incorrect shmem address (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Fix use of incorrect shmem address (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Fix use of incorrect size in memcpy call (bsc#1050536).
- qed: Fix use of incorrect size in memcpy call (bsc#1050536).
- qed: Free reserved MR tid (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: Free reserved MR tid (bsc#1086314 bsc#1086313 bsc#1086301).
- qed: LL2 flush isles when connection is closed (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: LL2 flush isles when connection is closed (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Limit msix vectors in kdump kernel to the minimum required count
(bsc#1050536).
- qed: Limit msix vectors in kdump kernel to the minimum required count
(bsc#1050536).
- qed: Populate nvm image attribute shadow (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Populate nvm image attribute shadow (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Remove reserveration of dpi for kernel (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Remove reserveration of dpi for kernel (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Remove unused data member 'is_mf_default' (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Remove unused data member 'is_mf_default' (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Use true and false for boolean values (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Use true and false for boolean values (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: Use zeroing memory allocator than allocator/memset (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: Use zeroing memory allocator than allocator/memset (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: code indent should use tabs where possible (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: code indent should use tabs where possible (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: fix spelling mistake: "checksumed" -> "checksummed" (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: fix spelling mistake: "checksumed" -> "checksummed" (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: fix spelling mistake: "offloded" -> "offloaded" (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: fix spelling mistake: "offloded" -> "offloaded" (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: fix spelling mistake: "taskelt" -> "tasklet" (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: fix spelling mistake: "taskelt" -> "tasklet" (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: off by one in qed_parse_mcp_trace_buf() (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: off by one in qed_parse_mcp_trace_buf() (bsc#1086314 bsc#1086313
bsc#1086301).
- qed: use kzalloc instead of kmalloc and memset (bsc#1086314
bsc#1086313 bsc#1086301).
- qed: use kzalloc instead of kmalloc and memset (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Add build_skb() support (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Add build_skb() support (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Add support for populating ethernet TLVs (bsc#1086314
bsc#1086313 bsc#1086301).
- qede: Add support for populating ethernet TLVs (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Adverstise software timestamp caps when PHC is not available
(bsc#1050538).
- qede: Adverstise software timestamp caps when PHC is not available
(bsc#1050538).
- qede: Do not drop rx-checksum invalidated packets (bsc#1086314
bsc#1086313 bsc#1086301).
- qede: Do not drop rx-checksum invalidated packets (bsc#1086314
bsc#1086313 bsc#1086301).
- qede: Ethtool flash update support (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Ethtool flash update support (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Fix barrier usage after tx doorbell write (bsc#1086314
bsc#1086313 bsc#1086301).
- qede: Fix barrier usage after tx doorbell write (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Fix ref-cnt usage count (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Fix ref-cnt usage count (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Refactor ethtool rx classification flow (bsc#1086314
bsc#1086313 bsc#1086301).
- qede: Refactor ethtool rx classification flow (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Support flow classification to the VFs (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Support flow classification to the VFs (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Use NETIF_F_GRO_HW (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Use NETIF_F_GRO_HW (bsc#1086314 bsc#1086313 bsc#1086301).
- qede: Validate unsupported configurations (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: Validate unsupported configurations (bsc#1086314 bsc#1086313
bsc#1086301).
- qede: fix spelling mistake: "registeration" -> "registration"
(bsc#1086314 bsc#1086313 bsc#1086301).
- qede: fix spelling mistake: "registeration" -> "registration"
(bsc#1086314 bsc#1086313 bsc#1086301).
- qedr: Fix spelling mistake: "hanlde" -> "handle" (bsc#1086314
bsc#1086313 bsc#1086301).
- qedr: Fix spelling mistake: "hanlde" -> "handle" (bsc#1086314
bsc#1086313 bsc#1086301).
- qlogic/qed: Constify *pkt_type_str (bsc#1086314 bsc#1086313
bsc#1086301).
- qlogic/qed: Constify *pkt_type_str (bsc#1086314 bsc#1086313 bsc#1086301).
- qlogic: check kstrtoul() for errors (bsc#1050540).
- qlogic: check kstrtoul() for errors (bsc#1050540).
- qmi_wwan: add support for Quectel EG91 (bsc#1051510).
- qmi_wwan: add support for the Dell Wireless 5821e module (bsc#1051510).
- qmi_wwan: fix interface number for DW5821e production firmware
(bsc#1051510).
- qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect
(bsc#1051510).
- r8152: fix tx packets accounting (bsc#1051510).
- r8152: napi hangup fix after disconnect (bsc#1051510).
- r8169: Be drop monitor friendly (bsc#1051510).
- rbd: flush rbd_dev->watch_dwork after watch is unregistered
(bsc#1103216).
- rdma/cma: Do not query GID during QP state transition to RTR
(bsc#1046306).
- rdma/cma: Do not query GID during QP state transition to RTR
(bsc#1046306).
- rdma/cma: Fix use after destroy access to net namespace for IPoib
(bsc#1046306).
- rdma/cma: Fix use after destroy access to net namespace for IPoib
(bsc#1046306).
- rdma/cxgb4: Use structs to describe the uABI instead of opencoding
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- rdma/cxgb4: release hw resources on device removal (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- rdma/i40iw: Avoid panic when objects are being created and destroyed
(bsc#1058659).
- rdma/i40iw: Avoid panic when objects are being created and destroyed
(bsc#1058659).
- rdma/i40iw: Avoid reference leaks when processing the AEQ (bsc#1058659).
- rdma/i40iw: Avoid reference leaks when processing the AEQ (bsc#1058659).
- rdma/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events (bsc#1046307).
- rdma/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events (bsc#1046307).
- rdma/iwpm: fix memory leak on map_info (bsc#1046306).
- rdma/iwpm: fix memory leak on map_info (bsc#1046306).
- rdma/mlx4: Discard unknown SQP work requests (bsc#1046302).
- rdma/mlx4: Discard unknown SQP work requests (bsc#1046302).
- rdma/mlx5: Do not assume that medium blueFlame register exists
(bsc#1046305).
- rdma/mlx5: Do not assume that medium blueFlame register exists
(bsc#1046305).
- rdma/mlx5: Fix NULL dereference while accessing XRC_TGT QPs
(bsc#1046305).
- rdma/mlx5: Fix NULL dereference while accessing XRC_TGT QPs
(bsc#1046305).
- rdma/mlx5: Fix memory leak in mlx5_ib_create_srq() error path
(bsc#1046305).
- rdma/mlx5: Fix memory leak in mlx5_ib_create_srq() error path
(bsc#1046305).
- rdma/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow
(bsc#1046305).
- rdma/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow
(bsc#1046305).
- rdma/mlx5: Protect from shift operand overflow (bsc#1046305).
- rdma/mlx5: Protect from shift operand overflow (bsc#1046305).
- rdma/mlx5: Use proper spec flow label type (bsc#1046305).
- rdma/mlx5: Use proper spec flow label type (bsc#1046305).
- rdma/qedr: Annotate iomem pointers correctly (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Annotate iomem pointers correctly (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Declare local functions static (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Declare local functions static (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Fix doorbell bar mapping for dpi > 1 (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix doorbell bar mapping for dpi > 1 (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Fix endian problems around imm_data (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix endian problems around imm_data (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Fix iWARP connect with port mapper (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix iWARP connect with port mapper (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Fix iWARP write and send with immediate (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix iWARP write and send with immediate (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix ipv6 destination address resolution (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix ipv6 destination address resolution (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix kernel panic when running fio over NFSordma
(bsc#1086314 bsc#1086313 bsc#1086301).
- rdma/qedr: Fix kernel panic when running fio over NFSordma (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Fix wmb usage in qedr (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Fix wmb usage in qedr (bsc#1086314 bsc#1086313 bsc#1086301).
- rdma/qedr: Remove set-but-not-used variables (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Remove set-but-not-used variables (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: Use NULL instead of 0 to represent a pointer (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Use NULL instead of 0 to represent a pointer (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Use zeroing memory allocator than allocator/memset
(bsc#1086314 bsc#1086313 bsc#1086301).
- rdma/qedr: Use zeroing memory allocator than allocator/memset
(bsc#1086314 bsc#1086313 bsc#1086301).
- rdma/qedr: Zero stack memory before copying to user space (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: Zero stack memory before copying to user space (bsc#1086314
bsc#1086313 bsc#1086301).
- rdma/qedr: eliminate duplicate barriers on weakly-ordered archs
(bsc#1086314 bsc#1086313 bsc#1086301).
- rdma/qedr: eliminate duplicate barriers on weakly-ordered archs
(bsc#1086314 bsc#1086313 bsc#1086301).
- rdma/qedr: lower print level of flushed CQEs (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/qedr: lower print level of flushed CQEs (bsc#1086314 bsc#1086313
bsc#1086301).
- rdma/ucma: Do not allow setting rdma_OPTION_ib_PATH without an rdma
device (bsc#1046306).
- rdma/ucma: Do not allow setting rdma_OPTION_ib_PATH without an rdma
device (bsc#1046306).
- rdma/ucma: ucma_context reference leak in error path (bsc#1046306).
- rdma/ucma: ucma_context reference leak in error path (bsc#1046306).
- rdma/uverbs: Protect from attempts to create flows on unsupported QP
(bsc#1046306).
- rdma/uverbs: Protect from attempts to create flows on unsupported QP
(bsc#1046306).
- rdma/uverbs: Use an unambiguous errno for method not supported
(bsc#1046306).
- rdma/uverbs: Use an unambiguous errno for method not supported
(bsc#1046306).
- regulator: max8998: Fix platform data retrieval (bsc#1051510).
- regulator: qcom_spmi: Include offset when translating voltages
(bsc#1051510).
- regulator: tps65218: Fix strobe assignment (bsc#1051510).
- rpm/kernel-source.spec.in: Add more stuff to Recommends ... and move bc
to Recommends as well. All these packages are needed for building a
kernel manually from scratch with kernel-source files.
- rpm/kernel-source.spec.in: require bc for kernel-source This is needed
for building include/generated/timeconst.h from kernel/time/timeconst.bc.
- rtc: ac100: Fix ac100 determine rate bug (bsc#1051510).
- rtc: pxa: fix probe function (bsc#1051510).
- rtlwifi: Fix kernel Oops "Fw download fail!!" (bsc#1051510).
- rtlwifi: rtl8821ae: fix firmware is not ready to run (bsc#1051510).
- rtnetlink: validate attributes in do_setlink()
(networking-stable-18_06_08).
- s390/crc32-vx: use expoline for indirect branches (git-fixes f19fbd5ed6).
- s390/ftrace: use expoline for indirect branches (git-fixes f19fbd5ed6).
- s390/gs: add compat regset for the guarded storage broadcast control
block (git-fixes e525f8a6e696).
- s390/kernel: use expoline for indirect branches (git-fixes f19fbd5ed6).
- s390/lib: use expoline for indirect branches (git-fixes f19fbd5ed6).
- s390/qdio: do not retry EQBS after CCQ 96 (bsc#1102088, LTC#169699).
- s390/qeth: fix error handling in adapter command callbacks (bsc#1102088,
LTC#169699).
- s390/qeth: fix race when setting MAC address (bnc#1093148, LTC#167307).
- s390: Correct register corruption in critical section cleanup (git-fixes
6dd85fbb87).
- s390: add assembler macros for CPU alternatives (git-fixes f19fbd5ed6).
- s390: correct module section names for expoline code revert (git-fixes
f19fbd5ed6).
- s390: extend expoline to BC instructions (git-fixes, bsc#1103421).
- s390: move expoline assembler macros to a header (git-fixes f19fbd5ed6).
- s390: move spectre sysfs attribute code (bsc#1090098).
- s390: optimize memset implementation (git-fixes f19fbd5ed6).
- s390: remove indirect branch from do_softirq_own_stack (git-fixes
f19fbd5ed6).
- s390: use expoline thunks in the BPF JIT (git-fixes, bsc#1103421).
- sched/core: Optimize ttwu_stat() (bnc#1101669 optimise numa balancing
for fast migrate).
- sched/core: Optimize update_stats_*() (bnc#1101669 optimise numa
balancing for fast migrate).
- scripts/dtc: fix '%zx' warning (bsc#1051510).
- scripts/gdb/linux/tasks.py: fix get_thread_info (bsc#1051510).
- scripts/git_sort/git_sort.py: Add 'nvme-4.18' to the list of repositories
- scripts/git_sort/git_sort.py: add modules-next tree
- scripts/kernel-doc: Do not fail with status != 0 if error encountered
with -none (bsc#1051510).
- scsi: aacraid: Correct hba_send to include iu_type (bsc#1077989).
- scsi: core: clean up generated file scsi_devinfo_tbl.c (bsc#1077989).
- scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()
(bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583
bsc#1097584).
- scsi: megaraid_sas: Do not log an error if FW successfully initializes
(bsc#1077989).
- scsi: qla2xxx: Fix inconsistent DMA mem alloc/free (bsc#1077989).
- scsi: qla2xxx: Fix kernel crash due to late workqueue allocation
(bsc#1077338).
- scsi: zfcp: fix infinite iteration on ERP ready list (bsc#1102088,
LTC#169699).
- scsi: zfcp: fix misleading REC trigger trace where erp_action setup
failed (bsc#1102088, LTC#169699).
- scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED
(bsc#1102088, LTC#169699).
- scsi: zfcp: fix missing REC trigger trace on enqueue without ERP thread
(bsc#1102088, LTC#169699).
- scsi: zfcp: fix missing REC trigger trace on terminate_rport_io early
return (bsc#1102088, LTC#169699).
- scsi: zfcp: fix missing REC trigger trace on terminate_rport_io for
ERP_FAILED (bsc#1102088, LTC#169699).
- scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler
(bsc#1102088, LTC#169699).
- scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF
(bsc#1102088, LTC#169699).
- sctp: not allow transport timeout value less than HZ/5 for hb_timer
(networking-stable-18_06_08).
- serial: earlycon: Only try fdt when specify 'earlycon' exactly
(bsc#1051510).
- serial: imx: drop if that always evaluates to true (bsc#1051510).
- serial: pxa: Fix out-of-bounds access through serial port index
(bsc#1051510).
- serial: sh-sci: Update warning message in sci_request_dma_chan()
(bsc#1051510).
- serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding
version (bsc#1051510).
- serial: sirf: Fix out-of-bounds access through DT alias (bsc#1051510).
- sfc: stop the TX queue before pushing new buffers (bsc#1058169).
- sfc: stop the TX queue before pushing new buffers (bsc#1058169).
- smsc75xx: Add workaround for gigabit link up hardware errata
(bsc#1051510).
- smsc75xx: fix smsc75xx_set_features() (bsc#1051510).
- smsc95xx: Configure pause time to 0xffff when tx flow control enabled
(bsc#1051510).
- socket: close race condition between sock_close() and sockfs_setattr()
(networking-stable-18_06_20).
- spi: bcm-qspi: fIX some error handling paths (bsc#1051510).
- spi: core: Fix devm_spi_register_master() function name in kerneldoc
(bsc#1051510).
- spi: pxa2xx: Do not touch CS pin until we have a transfer pending
(bsc#1051510).
- spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR (bsc#1051510).
- staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
(bsc#1051510).
- staging: fbtft: array underflow in fbtft_request_gpios_match()
(bsc#1051510).
- staging: iio: ade7759: fix signed extension bug on shift of a u8
(bsc#1051510).
- staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data()
(bsc#1051510).
- staging: rtl8723bs: add missing range check on id (bsc#1051510).
- staging: rtl8723bs: fix u8 less than zero check (bsc#1051510).
- staging: rts5208: Fix "seg_no" calculation in reset_ms_card()
(bsc#1051510).
- staging: sm750fb: Fix parameter mistake in poke32 (bsc#1051510).
- staging:iio:ade7854: Fix error handling on read/write (bsc#1051510).
- staging:iio:ade7854: Fix the wrong number of bits to read (bsc#1051510).
- tcp: verify the checksum of the first data segment in a new connection
(networking-stable-18_06_20).
- team: use netdev_features_t instead of u32 (networking-stable-18_06_08).
- thermal/drivers/hisi: Fix kernel panic on alarm interrupt (bsc#1051510).
- thermal/drivers/hisi: Fix missing interrupt enablement (bsc#1051510).
- thermal/drivers/hisi: Fix multiple alarm interrupts firing (bsc#1051510).
- thermal/drivers/hisi: Simplify the temperature/step computation
(bsc#1051510).
- thermal: bcm2835: fix an error code in probe() (bsc#1051510).
- thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies (bsc#1051510).
- time: Make sure jiffies_to_msecs() preserves non-zero time periods
(bsc#1051510).
- timekeeping: Use proper timekeeper for debug code (bsc#1051510).
- tools lib traceevent: Fix get_field_str() for dynamic strings
(bsc#1051510).
- tools lib traceevent: Simplify pointer print logic and fix %pF
(bsc#1051510).
- tools/lib/lockdep: Define the ARRAY_SIZE() macro (bsc#1051510).
- tools/lib/lockdep: Fix undefined symbol prandom_u32 (bsc#1051510).
- tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
(bsc#1051510).
- tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
(bsc#1051510).
- tools/thermal: tmon: fix for segfault (bsc#1051510).
- tools/usbip: fixes build with musl libc toolchain (bsc#1051510).
- ubi: fastmap: Correctly handle interrupted erasures in EBA (bsc#1051510).
- ubifs: Fix data node size for truncating uncompressed nodes
(bsc#1051510).
- ubifs: Fix potential integer overflow in allocation (bsc#1051510).
- ubifs: Fix uninitialized variable in search_dh_cookie() (bsc#1051510).
- ubifs: Fix unlink code wrt. double hash lookups (bsc#1051510).
- udp: fix rx queue len reported by diag and proc interface
(networking-stable-18_06_20).
- usb-storage: Add compatibility quirk flags for G-Technologies G-Drive
(bsc#1051510).
- usb-storage: Add support for FL_ALWAYS_SYNC flag in the UAS driver
(bsc#1051510).
- usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()
(bsc#1051510).
- usb: Increment wakeup count on remote wakeup (bsc#1051510).
- usb: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
(bsc#1087092).
- usb: audio-v2: Correct the comment for struct
uac_clock_selector_descriptor (bsc#1051510).
- usb: cdc_acm: Add quirk for Castles VEGA3000 (bsc#1051510).
- usb: cdc_acm: Add quirk for Uniden UBC125 scanner (bsc#1051510).
- usb: cdc_acm: prevent race at write to acm while system resumes
(bsc#1087092).
- usb: core: handle hub C_PORT_OVER_CURRENT condition (bsc#1051510).
- usb: do not reset if a low-speed or full-speed device timed out
(bsc#1051510).
- usb: dwc2: Fix DMA alignment to start at allocated boundary
(bsc#1051510).
- usb: dwc2: Fix dwc2_hsotg_core_init_disconnected() (bsc#1051510).
- usb: dwc2: Improve gadget state disconnection handling (bsc#1085539).
- usb: dwc2: debugfs: Do not touch RX FIFO during register dump
(bsc#1051510).
- usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub
(bsc#1051510).
- usb: dwc2: hcd: Fix host channel halt flow (bsc#1051510).
- usb: dwc2: host: Fix transaction errors in host mode (bsc#1051510).
- usb: dwc3: Add SoftReset PHY synchonization delay (bsc#1051510).
- usb: dwc3: Fix GDBGFIFOSPACE_TYPE values (bsc#1051510).
- usb: dwc3: Makefile: fix link error on randconfig (bsc#1051510).
- usb: dwc3: Undo PHY init if soft reset fails (bsc#1051510).
- usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields (bsc#1051510).
- usb: dwc3: ep0: Reset TRB counter for ep0 IN (bsc#1051510).
- usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue
(bsc#1051510).
- usb: dwc3: gadget: Set maxpacket size for ep0 IN (bsc#1051510).
- usb: dwc3: of-simple: fix use-after-free on remove (bsc#1051510).
- usb: dwc3: omap: do not miss events during suspend/resume (bsc#1051510).
- usb: dwc3: pci: Properly cleanup resource (bsc#1051510).
- usb: dwc3: prevent setting PRTCAP to OTG from debugfs (bsc#1051510).
- usb: gadget: bdc: 64-bit pointer capability check (bsc#1051510).
- usb: gadget: composite: fix incorrect handling of OS desc requests
(bsc#1051510).
- usb: gadget: core: Fix use-after-free of usb_request (bsc#1051510).
- usb: gadget: dummy: fix nonsensical comparisons (bsc#1051510).
- usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb() (bsc#1051510).
- usb: gadget: f_fs: Only return delayed status when len is 0
(bsc#1051510).
- usb: gadget: f_fs: Process all descriptors during bind (bsc#1051510).
- usb: gadget: f_fs: Use config_ep_by_speed() (bsc#1051510).
- usb: gadget: f_mass_storage: Fix the logic to iterate all common->luns
(bsc#1051510).
- usb: gadget: f_midi: fixing a possible double-free in f_midi
(bsc#1051510).
- usb: gadget: f_uac2: fix bFirstInterface in composite gadget
(bsc#1051510).
- usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'
(bsc#1051510).
- usb: gadget: f_uac2: fix error handling in afunc_bind (again)
(bsc#1051510).
- usb: gadget: ffs: Execute copy_to_user() with USER_DS set (bsc#1051510).
- usb: gadget: ffs: Let setup() return usb_GADGET_DELAYED_STATUS
(bsc#1051510).
- usb: gadget: fsl_udc_core: fix ep valid checks (bsc#1051510).
- usb: gadget: udc: Add missing platform_device_put() on error in
bdc_pci_probe() (bsc#1051510).
- usb: gadget: udc: change comparison to bitshift when dealing with a mask
(bsc#1051510).
- usb: gadget: udc: core: update usb_ep_queue() documentation
(bsc#1051510).
- usb: gadget: udc: renesas_usb3: disable the controller's irqs for
reconnecting (bsc#1051510).
- usb: host: ehci: use correct device pointer for dma ops (bsc#1087092).
- usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume
timing" (bsc#1051510).
- usb: ldusb: add PIDs for new CASSY devices supported by this driver
(bsc#1051510).
- usb: musb: Fix external abort in musb_remove on omap2430 (bsc#1051510).
- usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
(bsc#1051510).
- usb: musb: fix enumeration after resume (bsc#1051510).
- usb: musb: fix remote wakeup racing with suspend (bsc#1051510).
- usb: musb: gadget: misplaced out of bounds check (bsc#1051510).
- usb: musb: host: fix potential NULL pointer dereference (bsc#1051510).
- usb: musb: trace: fix NULL pointer dereference in musb_g_tx()
(bsc#1051510).
- usb: option: Add support for FS040U modem (bsc#1087092).
- usb: quirks: add delay quirks for Corsair Strafe (bsc#1051510).
- usb: serial: ch341: fix type promotion bug in ch341_control_in()
(bsc#1051510).
- usb: serial: cp210x: add CESINEL device ids (bsc#1051510).
- usb: serial: cp210x: add ELDAT Easywave RX09 id (bsc#1051510).
- usb: serial: cp210x: add ID for NI usb serial console (bsc#1051510).
- usb: serial: cp210x: add Silicon Labs IDs for Windows Update
(bsc#1051510).
- usb: serial: cp210x: add another usb ID for Qivicon ZigBee stick
(bsc#1051510).
- usb: serial: ftdi_sio: add RT Systems VX-8 cable (bsc#1051510).
- usb: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
(bsc#1051510).
- usb: serial: ftdi_sio: use jtag quirk for Arrow usb Blaster
(bsc#1051510).
- usb: serial: keyspan_pda: fix modem-status error handling (bsc#1100132).
- usb: serial: mos7840: fix status-register error handling (bsc#1051510).
- usb: serial: option: Add support for Quectel EP06 (bsc#1051510).
- usb: serial: option: adding support for ublox R410M (bsc#1051510).
- usb: serial: option: reimplement interface masking (bsc#1051510).
- usb: serial: simple: add libtransistor console (bsc#1051510).
- usb: serial: visor: handle potential invalid device configuration
(bsc#1051510).
- usb: yurex: fix out-of-bounds uaccess in read handler (bsc#1100132).
- usbip: Correct maximum value of CONFIG_usbIP_VHCI_HC_PORTS (bsc#1051510).
- usbip: usbip_event: fix to not print kernel pointer address
(bsc#1051510).
- usbip: usbip_host: refine probe and disconnect debug msgs to be useful
(bsc#1051510).
- usbip: vhci_hcd: Fix usb device and sockfd leaks (bsc#1051510).
- usbip: vhci_sysfs: fix potential Spectre v1 (bsc#1051510).
- vfio/pci: Fix potential Spectre v1 (bsc#1051510).
- vfio/spapr: Use IOMMU pageshift rather than pagesize (bsc#1077761,
git-fixes).
- vhost: synchronize IOTLB message with dev cleanup
(networking-stable-18_06_08).
- video/omap: add module license tags (bsc#1090888).
- video: remove unused kconfig SH_LCD_MIPI_DSI (bsc#1087092).
- virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
(bsc#1051510).
- virtio-net: correctly transmit XDP buff after linearizing
(networking-stable-18_06_08).
- virtio-net: fix leaking page for gso packet during mergeable XDP
(networking-stable-18_06_08).
- virtio-net: fix module unloading (bsc#1051510).
- virtio_net: Disable interrupts if napi_complete_done rescheduled napi
(bsc#1051510).
- virtio_net: fix XDP code path in receive_small() (bsc#1051510).
- vmcore: add API to collect hardware dump in second kernel (bsc#1097585
bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
- vrf: check the original netdevice for generating redirect
(networking-stable-18_06_08).
- wlcore: add missing nvs file name info for wilink8 (bsc#1051510).
- x.509: unpack RSA signatureValue field from BIT STRING (bsc#1051510).
- x86/efi: Access EFI MMIO data as unencrypted when SEV is active
(bsc#1099193).
- xen/grant-table: log the lack of grants (bnc#1085042).
- xhci: Fix kernel oops in trace_xhci_free_virt_device (bsc#1100132).
- xhci: Fix usb3 NULL pointer dereference at logical disconnect
(bsc#1090888).
- xhci: Fix use-after-free in xhci_free_virt_device (bsc#1100132).
- xhci: revert "xhci: plat: Register shutdown for xhci_plat" (bsc#1090888).
- xhci: xhci-mem: off by one in xhci_stream_id_to_ring() (bsc#1100132).
Patch Instructions:
To install this SUSE Security Update use the SUSE recommended installation methods
like YaST online_update or "zypper patch".
Alternatively you can run the command listed for your product:
- SUSE Linux Enterprise Workstation Extension 15:
zypper in -t patch SUSE-SLE-Product-WE-15-2018-1504=1
- SUSE Linux Enterprise Module for Live Patching 15:
zypper in -t patch SUSE-SLE-Module-Live-Patching-15-2018-1504=1
- SUSE Linux Enterprise Module for Legacy Software 15:
zypper in -t patch SUSE-SLE-Module-Legacy-15-2018-1504=1
- SUSE Linux Enterprise Module for Development Tools 15:
zypper in -t patch SUSE-SLE-Module-Development-Tools-15-2018-1504=1
- SUSE Linux Enterprise Module for Basesystem 15:
zypper in -t patch SUSE-SLE-Module-Basesystem-15-2018-1504=1
- SUSE Linux Enterprise High Availability 15:
zypper in -t patch SUSE-SLE-Product-HA-15-2018-1504=1
Package List:
- SUSE Linux Enterprise Workstation Extension 15 (x86_64):
kernel-default-debuginfo-4.12.14-25.6.1
kernel-default-debugsource-4.12.14-25.6.1
kernel-default-extra-4.12.14-25.6.1
kernel-default-extra-debuginfo-4.12.14-25.6.1
- SUSE Linux Enterprise Module for Live Patching 15 (ppc64le x86_64):
kernel-default-debuginfo-4.12.14-25.6.1
kernel-default-debugsource-4.12.14-25.6.1
kernel-default-livepatch-4.12.14-25.6.1
kernel-livepatch-4_12_14-25_6-default-1-1.3.1
kernel-livepatch-4_12_14-25_6-default-debuginfo-1-1.3.1
- SUSE Linux Enterprise Module for Legacy Software 15 (aarch64 ppc64le s390x x86_64):
kernel-default-debuginfo-4.12.14-25.6.1
kernel-default-debugsource-4.12.14-25.6.1
reiserfs-kmp-default-4.12.14-25.6.1
reiserfs-kmp-default-debuginfo-4.12.14-25.6.1
- SUSE Linux Enterprise Module for Development Tools 15 (aarch64 ppc64le s390x x86_64):
kernel-obs-build-4.12.14-25.6.1
kernel-obs-build-debugsource-4.12.14-25.6.1
kernel-syms-4.12.14-25.6.1
kernel-vanilla-base-4.12.14-25.6.1
kernel-vanilla-base-debuginfo-4.12.14-25.6.1
kernel-vanilla-debuginfo-4.12.14-25.6.1
kernel-vanilla-debugsource-4.12.14-25.6.1
- SUSE Linux Enterprise Module for Development Tools 15 (noarch):
kernel-docs-4.12.14-25.6.1
kernel-source-4.12.14-25.6.1
- SUSE Linux Enterprise Module for Basesystem 15 (aarch64 ppc64le s390x x86_64):
kernel-default-4.12.14-25.6.1
kernel-default-debuginfo-4.12.14-25.6.1
kernel-default-debugsource-4.12.14-25.6.1
kernel-default-devel-4.12.14-25.6.1
kernel-default-devel-debuginfo-4.12.14-25.6.1
- SUSE Linux Enterprise Module for Basesystem 15 (noarch):
kernel-devel-4.12.14-25.6.1
kernel-macros-4.12.14-25.6.1
- SUSE Linux Enterprise Module for Basesystem 15 (s390x):
kernel-default-man-4.12.14-25.6.1
kernel-zfcpdump-4.12.14-25.6.1
kernel-zfcpdump-debuginfo-4.12.14-25.6.1
kernel-zfcpdump-debugsource-4.12.14-25.6.1
- SUSE Linux Enterprise High Availability 15 (aarch64 ppc64le s390x x86_64):
cluster-md-kmp-default-4.12.14-25.6.1
cluster-md-kmp-default-debuginfo-4.12.14-25.6.1
dlm-kmp-default-4.12.14-25.6.1
dlm-kmp-default-debuginfo-4.12.14-25.6.1
gfs2-kmp-default-4.12.14-25.6.1
gfs2-kmp-default-debuginfo-4.12.14-25.6.1
kernel-default-debuginfo-4.12.14-25.6.1
kernel-default-debugsource-4.12.14-25.6.1
ocfs2-kmp-default-4.12.14-25.6.1
ocfs2-kmp-default-debuginfo-4.12.14-25.6.1
References:
https://www.suse.com/security/cve/CVE-2017-18344.html
https://www.suse.com/security/cve/CVE-2018-5390.html
https://bugzilla.suse.com/1012382
https://bugzilla.suse.com/1037697
https://bugzilla.suse.com/1046299
https://bugzilla.suse.com/1046300
https://bugzilla.suse.com/1046302
https://bugzilla.suse.com/1046303
https://bugzilla.suse.com/1046305
https://bugzilla.suse.com/1046306
https://bugzilla.suse.com/1046307
https://bugzilla.suse.com/1046533
https://bugzilla.suse.com/1046543
https://bugzilla.suse.com/1050242
https://bugzilla.suse.com/1050536
https://bugzilla.suse.com/1050538
https://bugzilla.suse.com/1050540
https://bugzilla.suse.com/1051510
https://bugzilla.suse.com/1054245
https://bugzilla.suse.com/1056651
https://bugzilla.suse.com/1056787
https://bugzilla.suse.com/1058169
https://bugzilla.suse.com/1058659
https://bugzilla.suse.com/1060463
https://bugzilla.suse.com/1068032
https://bugzilla.suse.com/1075087
https://bugzilla.suse.com/1075360
https://bugzilla.suse.com/1077338
https://bugzilla.suse.com/1077761
https://bugzilla.suse.com/1077989
https://bugzilla.suse.com/1085042
https://bugzilla.suse.com/1085536
https://bugzilla.suse.com/1085539
https://bugzilla.suse.com/1086301
https://bugzilla.suse.com/1086313
https://bugzilla.suse.com/1086314
https://bugzilla.suse.com/1086324
https://bugzilla.suse.com/1086457
https://bugzilla.suse.com/1087092
https://bugzilla.suse.com/1087202
https://bugzilla.suse.com/1087217
https://bugzilla.suse.com/1087233
https://bugzilla.suse.com/1090098
https://bugzilla.suse.com/1090888
https://bugzilla.suse.com/1091041
https://bugzilla.suse.com/1091171
https://bugzilla.suse.com/1093148
https://bugzilla.suse.com/1093666
https://bugzilla.suse.com/1094119
https://bugzilla.suse.com/1096330
https://bugzilla.suse.com/1097583
https://bugzilla.suse.com/1097584
https://bugzilla.suse.com/1097585
https://bugzilla.suse.com/1097586
https://bugzilla.suse.com/1097587
https://bugzilla.suse.com/1097588
https://bugzilla.suse.com/1098633
https://bugzilla.suse.com/1099193
https://bugzilla.suse.com/1100132
https://bugzilla.suse.com/1100884
https://bugzilla.suse.com/1101143
https://bugzilla.suse.com/1101337
https://bugzilla.suse.com/1101352
https://bugzilla.suse.com/1101564
https://bugzilla.suse.com/1101669
https://bugzilla.suse.com/1101674
https://bugzilla.suse.com/1101789
https://bugzilla.suse.com/1101813
https://bugzilla.suse.com/1101816
https://bugzilla.suse.com/1102088
https://bugzilla.suse.com/1102097
https://bugzilla.suse.com/1102147
https://bugzilla.suse.com/1102340
https://bugzilla.suse.com/1102512
https://bugzilla.suse.com/1102851
https://bugzilla.suse.com/1103216
https://bugzilla.suse.com/1103220
https://bugzilla.suse.com/1103230
https://bugzilla.suse.com/1103421
More information about the sle-security-updates
mailing list