SUSE-CU-2020:848-1: Security update of caasp/v4.5/velero
sle-security-updates at lists.suse.com
sle-security-updates at lists.suse.com
Sat Dec 12 05:15:54 MST 2020
SUSE Container Update Advisory: caasp/v4.5/velero
-----------------------------------------------------------------
Container Advisory ID : SUSE-CU-2020:848-1
Container Tags : caasp/v4.5/velero:1.4.2 , caasp/v4.5/velero:1.4.2-rev2 , caasp/v4.5/velero:1.4.2-rev2-build5.5.1
Container Release : 5.5.1
Severity : important
Type : security
References : 1011548 1100369 1104902 1109160 1118367 1118368 1128220 1142733
1146991 1153943 1153946 1154935 1156205 1157051 1158336 1158830
1161168 1161239 1165424 1165502 1167471 1170667 1170713 1170964
1171313 1171740 1171762 1172195 1172270 1172798 1172824 1172846
1172958 1173055 1173165 1173273 1173307 1173311 1173422 1173470
1173529 1173539 1173972 1173983 1174079 1174154 1174219 1174232
1174240 1174551 1174561 1174593 1174736 1174753 1174817 1174918
1174918 1174951 1175109 1175168 1175342 1175352 1175443 1175568
1175592 1175811 1175830 1175831 1175844 1176086 1176092 1176123
1176179 1176181 1176192 1176225 1176410 1176435 1176513 1176578
1176671 1176674 1176712 1176740 1176800 1176902 1176903 1176904
1177143 1177238 1177361 1177362 1177458 1177479 1177490 1177510
1177660 1177661 1177858 1177864 1178376 1178387 1178512 1178727
1178785 1179398 1179399 1179431 1179491 1179515 1179593 906079
935885 CVE-2017-3136 CVE-2018-5741 CVE-2019-6477 CVE-2020-13844
CVE-2020-15106 CVE-2020-15719 CVE-2020-1971 CVE-2020-24659 CVE-2020-24977
CVE-2020-25219 CVE-2020-25692 CVE-2020-26154 CVE-2020-28196 CVE-2020-8027
CVE-2020-8029 CVE-2020-8231 CVE-2020-8284 CVE-2020-8285 CVE-2020-8286
CVE-2020-8564 CVE-2020-8565 CVE-2020-8616 CVE-2020-8617 CVE-2020-8618
CVE-2020-8619 CVE-2020-8620 CVE-2020-8621 CVE-2020-8622 CVE-2020-8623
CVE-2020-8624
-----------------------------------------------------------------
The container caasp/v4.5/velero was updated. The following patches have been included in this update:
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2384-1
Released: Sat Aug 29 00:57:13 2020
Summary: Recommended update for e2fsprogs
Type: recommended
Severity: low
References: 1170964
This update for e2fsprogs fixes the following issues:
- Fix for an issue when system message with placeholders are not properly replaced. (bsc#1170964)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2411-1
Released: Tue Sep 1 13:28:47 2020
Summary: Recommended update for systemd
Type: recommended
Severity: moderate
References: 1142733,1146991,1158336,1172195,1172824,1173539
This update for systemd fixes the following issues:
- Improve logging when PID1 fails at setting a namespace up when spawning a command specified by
'Exec*='. (bsc#1172824, bsc#1142733)
pid1: improve message when setting up namespace fails.
execute: let's close glibc syslog channels too.
execute: normalize logging in *execute.c*.
execute: fix typo in error message.
execute: drop explicit *log_open()*/*log_close()* now that it is unnecessary.
execute: make use of the new logging mode in *execute.c*
log: add a mode where we open the log fds for every single log message.
log: let's make use of the fact that our functions return the negative error code for *log_oom()* too.
execute: downgrade a log message ERR → WARNING, since we proceed ignoring its result.
execute: rework logging in *setup_keyring()* to include unit info.
execute: improve and augment execution log messages.
- vconsole-setup: downgrade log message when setting font fails on dummy console. (bsc#1172195 bsc#1173539)
- fix infinite timeout. (bsc#1158336)
- bpf: mount bpffs by default on boot. (bsc#1146991)
- man: explain precedence for options which take a list.
- man: unify titling, fix description of precedence in sysusers.d(5)
- udev-event: fix timeout log messages.
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2420-1
Released: Tue Sep 1 13:48:35 2020
Summary: Recommended update for zlib
Type: recommended
Severity: moderate
References: 1174551,1174736
This update for zlib provides the following fixes:
- Permit a deflateParams() parameter change as soon as possible. (bsc#1174736)
- Fix DFLTCC not flushing EOBS when creating raw streams. (bsc#1174551)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2445-1
Released: Wed Sep 2 09:33:02 2020
Summary: Security update for curl
Type: security
Severity: moderate
References: 1175109,CVE-2020-8231
This update for curl fixes the following issues:
- An application that performs multiple requests with libcurl's
multi API and sets the 'CURLOPT_CONNECT_ONLY' option, might in
rare circumstances experience that when subsequently using the
setup connect-only transfer, libcurl will pick and use the wrong
connection and instead pick another one the application has
created since then. [bsc#1175109, CVE-2020-8231]
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2581-1
Released: Wed Sep 9 13:07:07 2020
Summary: Security update for openldap2
Type: security
Severity: moderate
References: 1174154,CVE-2020-15719
This update for openldap2 fixes the following issues:
- bsc#1174154 - CVE-2020-15719 - This resolves an issue with x509
SAN's falling back to CN validation in violation of rfc6125.
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2612-1
Released: Fri Sep 11 11:18:01 2020
Summary: Security update for libxml2
Type: security
Severity: moderate
References: 1176179,CVE-2020-24977
This update for libxml2 fixes the following issues:
- CVE-2020-24977: Fixed a global-buffer-overflow in xmlEncodeEntitiesInternal (bsc#1176179).
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2651-1
Released: Wed Sep 16 14:42:55 2020
Summary: Recommended update for zlib
Type: recommended
Severity: moderate
References: 1175811,1175830,1175831
This update for zlib fixes the following issues:
- Fix compression level switching (bsc#1175811, bsc#1175830, bsc#1175831)
- Enable hardware compression on s390/s390x (jsc#SLE-13776)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2704-1
Released: Tue Sep 22 15:06:36 2020
Summary: Recommended update for krb5
Type: recommended
Severity: moderate
References: 1174079
This update for krb5 fixes the following issue:
- Fix prefix reported by krb5-config, libraries and headers are not installed under /usr/lib/mit prefix. (bsc#1174079)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2712-1
Released: Tue Sep 22 17:08:03 2020
Summary: Security update for openldap2
Type: security
Severity: moderate
References: 1175568,CVE-2020-8027
This update for openldap2 fixes the following issues:
- CVE-2020-8027: openldap_update_modules_path.sh starts daemons unconditionally and uses fixed paths in /tmp (bsc#1175568).
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2819-1
Released: Thu Oct 1 10:39:16 2020
Summary: Recommended update for libzypp, zypper
Type: recommended
Severity: moderate
References: 1165424,1173273,1173529,1174240,1174561,1174918,1175342,1175592
This update for libzypp, zypper provides the following fixes:
Changes in libzypp:
- VendorAttr: Const-correct API and let Target provide its settings. (bsc#1174918)
- Support buildnr with commit hash in purge-kernels. This adds special behaviour for when
a kernel version has the rebuild counter before the kernel commit hash. (bsc#1175342)
- Improve Italian translation of the 'breaking dependencies' message. (bsc#1173529)
- Make sure reading from lsof does not block forever. (bsc#1174240)
- Just collect details for the signatures found.
Changes in zypper:
- man: Enhance description of the global package cache. (bsc#1175592)
- man: Point out that plain rpm packages are not downloaded to the global package cache.
(bsc#1173273)
- Directly list subcommands in 'zypper help'. (bsc#1165424)
- Remove extern C block wrapping augeas.h as it breaks the build on Arch Linux.
- Point out that plaindir repos do not follow symlinks. (bsc#1174561)
- Fix help command for list-patches.
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2852-1
Released: Fri Oct 2 16:55:39 2020
Summary: Recommended update for openssl-1_1
Type: recommended
Severity: moderate
References: 1173470,1175844
This update for openssl-1_1 fixes the following issues:
FIPS:
* Include ECDH/DH Requirements from SP800-56Arev3 (bsc#1175844, bsc#1173470).
* Add shared secret KAT to FIPS DH selftest (bsc#1175844).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2864-1
Released: Tue Oct 6 10:34:14 2020
Summary: Security update for gnutls
Type: security
Severity: moderate
References: 1176086,1176181,1176671,CVE-2020-24659
This update for gnutls fixes the following issues:
- Fix heap buffer overflow in handshake with no_renegotiation alert sent (CVE-2020-24659 bsc#1176181)
- FIPS: Implement (EC)DH requirements from SP800-56Arev3 (bsc#1176086)
- FIPS: Use 2048 bit prime in DH selftest (bsc#1176086)
- FIPS: Add TLS KDF selftest (bsc#1176671)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2869-1
Released: Tue Oct 6 16:13:20 2020
Summary: Recommended update for aaa_base
Type: recommended
Severity: moderate
References: 1011548,1153943,1153946,1161239,1171762
This update for aaa_base fixes the following issues:
- DIR_COLORS (bug#1006973):
- add screen.xterm-256color
- add TERM rxvt-unicode-256color
- sort and merge TERM entries in etc/DIR_COLORS
- check for Packages.db and use this instead of Packages. (bsc#1171762)
- Rename path() to _path() to avoid using a general name.
- refresh_initrd call modprobe as /sbin/modprobe (bsc#1011548)
- etc/profile add some missing ;; in case esac statements
- profile and csh.login: on s390x set TERM to dumb on dumb terminal (bsc#1153946)
- backup-rpmdb: exit if zypper is running (bsc#1161239)
- Add color alias for ip command (jsc#sle-9880, jsc#SLE-7679, bsc#1153943)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2893-1
Released: Mon Oct 12 14:14:55 2020
Summary: Recommended update for openssl-1_1
Type: recommended
Severity: moderate
References: 1177479
This update for openssl-1_1 fixes the following issues:
- Restore private key check in EC_KEY_check_key (bsc#1177479)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2901-1
Released: Tue Oct 13 14:22:43 2020
Summary: Security update for libproxy
Type: security
Severity: important
References: 1176410,1177143,CVE-2020-25219,CVE-2020-26154
This update for libproxy fixes the following issues:
- CVE-2020-25219: Rewrote url::recvline to be nonrecursive (bsc#1176410).
- CVE-2020-26154: Fixed a buffer overflow when PAC is enabled (bsc#1177143).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2914-1
Released: Tue Oct 13 17:25:20 2020
Summary: Security update for bind
Type: security
Severity: moderate
References: 1100369,1109160,1118367,1118368,1128220,1156205,1157051,1161168,1170667,1170713,1171313,1171740,1172958,1173307,1173311,1173983,1175443,1176092,1176674,906079,CVE-2017-3136,CVE-2018-5741,CVE-2019-6477,CVE-2020-8616,CVE-2020-8617,CVE-2020-8618,CVE-2020-8619,CVE-2020-8620,CVE-2020-8621,CVE-2020-8622,CVE-2020-8623,CVE-2020-8624
This update for bind fixes the following issues:
BIND was upgraded to version 9.16.6:
Note:
- bind is now more strict in regards to DNSSEC. If queries are not working,
check for DNSSEC issues. For instance, if bind is used in a namserver
forwarder chain, the forwarding DNS servers must support DNSSEC.
Fixing security issues:
- CVE-2020-8616: Further limit the number of queries that can be triggered from
a request. Root and TLD servers are no longer exempt
from max-recursion-queries. Fetches for missing name server. (bsc#1171740)
Address records are limited to 4 for any domain.
- CVE-2020-8617: Replaying a TSIG BADTIME response as a request could trigger an
assertion failure. (bsc#1171740)
- CVE-2019-6477: Fixed an issue where TCP-pipelined queries could bypass
the tcp-clients limit (bsc#1157051).
- CVE-2018-5741: Fixed the documentation (bsc#1109160).
- CVE-2020-8618: It was possible to trigger an INSIST when determining
whether a record would fit into a TCP message buffer (bsc#1172958).
- CVE-2020-8619: It was possible to trigger an INSIST in
lib/dns/rbtdb.c:new_reference() with a particular zone content
and query patterns (bsc#1172958).
- CVE-2020-8624: 'update-policy' rules of type 'subdomain' were
incorrectly treated as 'zonesub' rules, which allowed
keys used in 'subdomain' rules to update names outside
of the specified subdomains. The problem was fixed by
making sure 'subdomain' rules are again processed as
described in the ARM (bsc#1175443).
- CVE-2020-8623: When BIND 9 was compiled with native PKCS#11 support, it
was possible to trigger an assertion failure in code
determining the number of bits in the PKCS#11 RSA public
key with a specially crafted packet (bsc#1175443).
- CVE-2020-8621: named could crash in certain query resolution scenarios
where QNAME minimization and forwarding were both
enabled (bsc#1175443).
- CVE-2020-8620: It was possible to trigger an assertion failure by
sending a specially crafted large TCP DNS message (bsc#1175443).
- CVE-2020-8622: It was possible to trigger an assertion failure when
verifying the response to a TSIG-signed request (bsc#1175443).
Other issues fixed:
- Add engine support to OpenSSL EdDSA implementation.
- Add engine support to OpenSSL ECDSA implementation.
- Update PKCS#11 EdDSA implementation to PKCS#11 v3.0.
- Warn about AXFR streams with inconsistent message IDs.
- Make ISC rwlock implementation the default again.
- Fixed issues when using cookie-secrets for AES and SHA2 (bsc#1161168)
- Installed the default files in /var/lib/named and created
chroot environment on systems using transactional-updates (bsc#1100369, fate#325524)
- Fixed an issue where bind was not working in FIPS mode (bsc#906079).
- Fixed dependency issues (bsc#1118367 and bsc#1118368).
- GeoIP support is now discontinued, now GeoIP2 is used(bsc#1156205).
- Fixed an issue with FIPS (bsc#1128220).
- The liblwres library is discontinued upstream and is no longer included.
- Added service dependency on NTP to make sure the clock is accurate when bind is starts (bsc#1170667, bsc#1170713).
- Reject DS records at the zone apex when loading master files. Log but otherwise ignore attempts to add DS records at the zone apex via UPDATE.
- The default value of 'max-stale-ttl' has been changed from 1 week to 12 hours.
- Zone timers are now exported via statistics channel.
- The 'primary' and 'secondary' keywords, when used as parameters for 'check-names', were not processed correctly and were being ignored.
- 'rndc dnstap -roll <value>' did not limit the number of saved files to <value>.
- Add 'rndc dnssec -status' command.
- Addressed a couple of situations where named could crash.
- Changed /var/lib/named to owner root:named and perms rwxrwxr-t
so that named, being a/the only member of the 'named' group
has full r/w access yet cannot change directories owned by root
in the case of a compromized named.
[bsc#1173307, bind-chrootenv.conf]
- Added '/etc/bind.keys' to NAMED_CONF_INCLUDE_FILES in /etc/sysconfig/named to suppress warning message re missing file (bsc#1173983).
- Removed '-r /dev/urandom' from all invocations of rndc-confgen
(init/named system/lwresd.init system/named.init in vendor-files)
as this option is deprecated and causes rndc-confgen to fail.
(bsc#1173311, bsc#1176674, bsc#1170713)
- /usr/bin/genDDNSkey: Removing the use of the -r option in the call
of /usr/sbin/dnssec-keygen as BIND now uses the random number
functions provided by the crypto library (i.e., OpenSSL or a
PKCS#11 provider) as a source of randomness rather than /dev/random.
Therefore the -r command line option no longer has any effect on
dnssec-keygen. Leaving the option in genDDNSkey as to not break
compatibility. Patch provided by Stefan Eisenwiener.
[bsc#1171313]
- Put libns into a separate subpackage to avoid file conflicts
in the libisc subpackage due to different sonums (bsc#1176092).
- Require /sbin/start_daemon: both init scripts, the one used in
systemd context as well as legacy sysv, make use of start_daemon.
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:2947-1
Released: Fri Oct 16 15:23:07 2020
Summary: Security update for gcc10, nvptx-tools
Type: security
Severity: moderate
References: 1172798,1172846,1173972,1174753,1174817,1175168,CVE-2020-13844
This update for gcc10, nvptx-tools fixes the following issues:
This update provides the GCC10 compiler suite and runtime libraries.
The base SUSE Linux Enterprise libraries libgcc_s1, libstdc++6 are replaced by
the gcc10 variants.
The new compiler variants are available with '-10' suffix, you can specify them
via:
CC=gcc-10
CXX=g++-10
or similar commands.
For a detailed changelog check out https://gcc.gnu.org/gcc-10/changes.html
Changes in nvptx-tools:
- Enable build on aarch64
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2958-1
Released: Tue Oct 20 12:24:55 2020
Summary: Recommended update for procps
Type: recommended
Severity: moderate
References: 1158830
This update for procps fixes the following issues:
- Fixes an issue when command 'ps -C' does not allow anymore an argument longer than 15 characters. (bsc#1158830)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:2983-1
Released: Wed Oct 21 15:03:03 2020
Summary: Recommended update for file
Type: recommended
Severity: moderate
References: 1176123
This update for file fixes the following issues:
- Fixes an issue when file displays broken 'ELF' interpreter. (bsc#1176123)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3048-1
Released: Tue Oct 27 16:04:52 2020
Summary: Recommended update for libsolv, libzypp, yaml-cpp, zypper
Type: recommended
Severity: moderate
References: 1174918,1176192,1176435,1176712,1176740,1176902,1177238,935885
This update for libsolv, libzypp, yaml-cpp, zypper fixes the following issues:
libzypp was updated to 17.25.1:
- When kernel-rt has been installed, the purge-kernels service fails during boot. (bsc#1176902)
- Use package name provides as group key in purge-kernel (bsc#1176740 bsc#1176192)
kernel-default-base has new packaging, where the kernel uname -r
does not reflect the full package version anymore. This patch
adds additional logic to use the most generic/shortest edition
each package provides with %{packagename}=<version> to group the
kernel packages instead of the rpm versions.
This also changes how the keep-spec for specific versions is
applied, instead of matching the package versions, each of the
package name provides will be matched.
- RepoInfo: Return the type of the local metadata cache as
fallback (bsc#1176435)
- VendorAttr: Fix broken 'suse,opensuse' equivalence handling.
Enhance API and testcases. (bsc#1174918)
- Update docs regarding 'opensuse' namepace matching.
- Link against libzstd to close libsolvs open references
(as we link statically)
yaml-cpp:
- The libyaml-cpp0_6 library package is added the to the Basesystem module, LTSS and ESPOS
channels, and the INSTALLER channels, as a new libzypp dependency.
No source changes were done to yaml-cpp.
zypper was updated to 1.14.40:
- info: Assume descriptions starting with '<p>' are richtext
(bsc#935885)
- help: prevent 'whatis' from writing to stderr (bsc#1176712)
- wp: point out that command is aliased to a search command and
searches case-insensitive (jsc#SLE-16271)
libsolv was updated to 0.7.15 to fix:
- make testcase_mangle_repo_names deal correctly with freed repos
[bsc#1177238]
- fix deduceq2addedmap clearing bits outside of the map
- conda: feature depriorization first
- conda: fix startswith implementation
- move find_update_seeds() call in cleandeps calculation
- set SOLVABLE_BUILDHOST in rpm and rpmmd parsers
- new testcase_mangle_repo_names() function
- new solv_fmemopen() function
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3138-1
Released: Tue Nov 3 12:14:03 2020
Summary: Recommended update for systemd
Type: recommended
Severity: moderate
References: 1104902,1154935,1165502,1167471,1173422,1176513,1176800
This update for systemd fixes the following issues:
- seccomp: shm{get,at,dt} now have their own numbers everywhere (bsc#1173422)
- test-seccomp: log function names
- test-seccomp: add log messages when skipping tests
- basic/virt: Detect PowerVM hypervisor (bsc#1176800)
- fs-util: suppress world-writable warnings if we read /dev/null
- udevadm: rename option '--log-priority' into '--log-level'
- udev: rename kernel option 'log_priority' into 'log_level'
- fstab-generator: add 'nofail' when NFS 'bg' option is used (bsc#1176513)
- Fix memory protection default (bsc#1167471)
- cgroup: Support 0-value for memory protection directives and accepts MemorySwapMax=0 (bsc#1154935)
- Improve latency and reliability when users log in/out (bsc#1104902, bsc#1165502)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3157-1
Released: Wed Nov 4 15:37:05 2020
Summary: Recommended update for ca-certificates-mozilla
Type: recommended
Severity: moderate
References: 1177864
This update for ca-certificates-mozilla fixes the following issues:
The SSL Root CA store was updated to the 2.44 state of the Mozilla NSS Certificate store (bsc#1177864)
- Removed CAs:
- EE Certification Centre Root CA
- Taiwan GRCA
- Added CAs:
- Trustwave Global Certification Authority
- Trustwave Global ECC P256 Certification Authority
- Trustwave Global ECC P384 Certification Authority
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3290-1
Released: Wed Nov 11 12:25:32 2020
Summary: Recommended update for findutils
Type: recommended
Severity: moderate
References: 1174232
This update for findutils fixes the following issues:
- Do not unconditionally use leaf optimization for NFS. (bsc#1174232)
NFS st_nlink are not accurate on all implementations, leading to aborts() if that assumption is made.
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:3313-1
Released: Thu Nov 12 16:07:37 2020
Summary: Security update for openldap2
Type: security
Severity: important
References: 1178387,CVE-2020-25692
This update for openldap2 fixes the following issues:
- CVE-2020-25692: Fixed an unauthenticated remote denial of service due to incorrect validation of modrdn equality rules (bsc#1178387).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:3377-1
Released: Thu Nov 19 09:29:32 2020
Summary: Security update for krb5
Type: security
Severity: moderate
References: 1178512,CVE-2020-28196
This update for krb5 fixes the following security issue:
- CVE-2020-28196: Fixed an unbounded recursion via an ASN.1-encoded Kerberos message (bsc#1178512).
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3381-1
Released: Thu Nov 19 10:53:38 2020
Summary: Recommended update for systemd
Type: recommended
Severity: moderate
References: 1177458,1177490,1177510
This update for systemd fixes the following issues:
- build-sys: optionally disable support of journal over the network (bsc#1177458)
- ask-password: prevent buffer overflow when reading from keyring (bsc#1177510)
- mount: don't propagate errors from mount_setup_unit() further up
- Rely on the new build option --disable-remote for journal_remote
This allows to drop the workaround that consisted in cleaning journal-upload files and
{sysusers.d,tmpfiles.d}/systemd-remote.conf manually when 'journal_remote' support was disabled.
- Move journal-{remote,upload}.conf.5.gz man pages into systemd-journal_remote sub package
- Make sure {sysusers.d,tmpfiles.d}/systemd-remote.conf are not shipped with --without=journal_remote (bsc#1177458)
These files were incorrectly packaged in the main package when systemd-journal_remote was disabled.
- Make use of %{_unitdir} and %{_sysusersdir}
- Remove mq-deadline selection from 60-io-scheduler.rules (bsc#1177490)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3462-1
Released: Fri Nov 20 13:14:35 2020
Summary: Recommended update for pam and sudo
Type: recommended
Severity: moderate
References: 1174593,1177858,1178727
This update for pam and sudo fixes the following issue:
pam:
- pam_xauth: do not *free* a string which has been successfully passed to *putenv*. (bsc#1177858)
- Initialize the local variable *daysleft* to avoid a misleading warning for password expire days. (bsc#1178727)
- Run /usr/bin/xauth using the old user's and group's identifiers. (bsc#1174593)
sudo:
- Fix a problem with pam_xauth which checks effective and real uids to get the real identity of the user. (bsc#1174593)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3581-1
Released: Tue Dec 1 14:40:22 2020
Summary: Recommended update for libusb-1_0
Type: recommended
Severity: moderate
References: 1178376
This update for libusb-1_0 fixes the following issues:
- Fixes a build failure for libusb for the inclusion of 'sys/time.h' on PowerPC. (bsc#1178376)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3620-1
Released: Thu Dec 3 17:03:55 2020
Summary: Recommended update for pam
Type: recommended
Severity: moderate
References:
This update for pam fixes the following issues:
- Check if the password is part of the username. (jsc#SLE-16719, jsc#SLE-16720)
- Check whether the password contains a substring of of the user's name of at least `<N>` characters length in
some form. This is enabled by the new parameter `usersubstr=<N>`
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3626-1
Released: Fri Dec 4 13:51:46 2020
Summary: Recommended update for audit
Type: recommended
Severity: moderate
References: 1179515
This update for audit fixes the following issues:
- Enable Aarch64 processor support. (bsc#1179515)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2020:3703-1
Released: Mon Dec 7 20:17:32 2020
Summary: Recommended update for aaa_base
Type: recommended
Severity: moderate
References: 1179431
This update for aaa_base fixes the following issue:
- Avoid semicolon within (t)csh login script on S/390. (bsc#1179431)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:3721-1
Released: Wed Dec 9 13:36:46 2020
Summary: Security update for openssl-1_1
Type: security
Severity: important
References: 1179491,CVE-2020-1971
This update for openssl-1_1 fixes the following issues:
- CVE-2020-1971: Fixed a null pointer dereference in EDIPARTYNAME (bsc#1179491).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:3735-1
Released: Wed Dec 9 18:19:24 2020
Summary: Security update for curl
Type: security
Severity: moderate
References: 1179398,1179399,1179593,CVE-2020-8284,CVE-2020-8285,CVE-2020-8286
This update for curl fixes the following issues:
- CVE-2020-8286: Fixed improper OSCP verification in the client side (bsc#1179593).
- CVE-2020-8285: Fixed a stack overflow due to FTP wildcard (bsc#1179399).
- CVE-2020-8284: Fixed an issue where a malicius FTP server could make curl connect to a different IP (bsc#1179398).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2020:3761-1
Released: Fri Dec 11 13:29:49 2020
Summary: Security changes in Kubernetes, etcd, and skuba; Bugfix in cri-o package and make helm3 the default helm
Type: security
Severity: important
References: 1172270,1173055,1173165,1174219,1174951,1175352,1176225,1176578,1176903,1176904,1177361,1177362,1177660,1177661,1178785,CVE-2020-15106,CVE-2020-8029,CVE-2020-8564,CVE-2020-8565
== Kubernetes & etcd (Security fixes)
This fix involves an upgrade of Kubernetes and some add-ons. See https://documentation.suse.com/suse-caasp/4.5/html/caasp-admin/_cluster_updates.html#_updating_kubernetes_components for the upgrade procedure.
== Skuba (Security fixes) & helm3 becomes the default helm
In order to update skuba and helm or helm 3, you need to update the management workstation. See detailed instructions at https://documentation.suse.com/suse-caasp/4.5/html/caasp-admin/_cluster_updates.html#_update_management_workstation
More information about the sle-security-updates
mailing list