SUSE-CU-2023:3195-1: Security update of bci/rust
sle-security-updates at lists.suse.com
sle-security-updates at lists.suse.com
Fri Sep 29 07:40:40 UTC 2023
SUSE Container Update Advisory: bci/rust
-----------------------------------------------------------------
Container Advisory ID : SUSE-CU-2023:3195-1
Container Tags : bci/rust:1.72 , bci/rust:1.72-1.3.5 , bci/rust:latest , bci/rust:stable , bci/rust:stable-1.3.5
Container Release : 3.5
Severity : important
Type : security
References : 1200962 1206080 1206556 1208037 1208038 1208040 1208409 1209642
1210297 1210733 1211829 1212819 1212910 1213458 1214565 1214567
1214579 1214580 1214604 1214611 1214619 1214620 1214623 1214624
1214625 1215026 CVE-2020-19726 CVE-2021-32256 CVE-2022-35205
CVE-2022-35206 CVE-2022-4285 CVE-2022-44840 CVE-2022-45703 CVE-2022-47673
CVE-2022-47695 CVE-2022-47696 CVE-2022-48063 CVE-2022-48064 CVE-2022-48065
CVE-2023-0687 CVE-2023-1579 CVE-2023-1972 CVE-2023-2222 CVE-2023-25585
CVE-2023-25587 CVE-2023-25588 CVE-2023-38039
-----------------------------------------------------------------
The container bci/rust was updated. The following patches have been included in this update:
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2023:3814-1
Released: Wed Sep 27 18:08:17 2023
Summary: Recommended update for glibc
Type: recommended
Severity: moderate
References: 1211829,1212819,1212910
This update for glibc fixes the following issues:
- nscd: Fix netlink cache invalidation if epoll is used (bsc#1212910, BZ #29415)
- Restore lookup of IPv4 mapped addresses in files database (bsc#1212819, BZ #25457)
- elf: Remove excessive p_align check on PT_LOAD segments (bsc#1211829, BZ #28688)
- elf: Properly align PT_LOAD segments (bsc#1211829, BZ #28676)
- ld.so: Always use MAP_COPY to map the first segment (BZ #30452)
- add GB18030-2022 charmap (jsc#PED-4908, BZ #30243)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2023:3823-1
Released: Wed Sep 27 18:42:38 2023
Summary: Security update for curl
Type: security
Severity: important
References: 1215026,CVE-2023-38039
This update for curl fixes the following issues:
- CVE-2023-38039: Fixed possible DoS when receiving too large HTTP header. (bsc#1215026)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2023:3825-1
Released: Wed Sep 27 18:48:53 2023
Summary: Security update for binutils
Type: security
Severity: important
References: 1200962,1206080,1206556,1208037,1208038,1208040,1208409,1209642,1210297,1210733,1213458,1214565,1214567,1214579,1214580,1214604,1214611,1214619,1214620,1214623,1214624,1214625,CVE-2020-19726,CVE-2021-32256,CVE-2022-35205,CVE-2022-35206,CVE-2022-4285,CVE-2022-44840,CVE-2022-45703,CVE-2022-47673,CVE-2022-47695,CVE-2022-47696,CVE-2022-48063,CVE-2022-48064,CVE-2022-48065,CVE-2023-0687,CVE-2023-1579,CVE-2023-1972,CVE-2023-2222,CVE-2023-25585,CVE-2023-25587,CVE-2023-25588
This update for binutils fixes the following issues:
Update to version 2.41 [jsc#PED-5778]:
* The MIPS port now supports the Sony Interactive Entertainment Allegrex
processor, used with the PlayStation Portable, which implements the MIPS
II ISA along with a single-precision FPU and a few implementation-specific
integer instructions.
* Objdump's --private option can now be used on PE format files to display the
fields in the file header and section headers.
* New versioned release of libsframe: libsframe.so.1. This release introduces
versioned symbols with version node name LIBSFRAME_1.0. This release also
updates the ABI in an incompatible way: this includes removal of
sframe_get_funcdesc_with_addr API, change in the behavior of
sframe_fre_get_ra_offset and sframe_fre_get_fp_offset APIs.
* SFrame Version 2 is now the default (and only) format version supported by
gas, ld, readelf and objdump.
* Add command-line option, --strip-section-headers, to objcopy and strip to
remove ELF section header from ELF file.
* The RISC-V port now supports the following new standard extensions:
- Zicond (conditional zero instructions)
- Zfa (additional floating-point instructions)
- Zvbb, Zvbc, Zvkg, Zvkned, Zvknh[ab], Zvksed, Zvksh, Zvkn, Zvknc, Zvkng,
Zvks, Zvksc, Zvkg, Zvkt (vector crypto instructions)
* The RISC-V port now supports the following vendor-defined extensions:
- XVentanaCondOps
* Add support for Intel FRED, LKGS and AMX-COMPLEX instructions.
* A new .insn directive is recognized by x86 gas.
* Add SME2 support to the AArch64 port.
* The linker now accepts a command line option of --remap-inputs
<PATTERN>=<FILE> to relace any input file that matches <PATTERN> with
<FILE>. In addition the option --remap-inputs-file=<FILE> can be used to
specify a file containing any number of these remapping directives.
* The linker command line option --print-map-locals can be used to include
local symbols in a linker map. (ELF targets only).
* For most ELF based targets, if the --enable-linker-version option is used
then the version of the linker will be inserted as a string into the .comment
section.
* The linker script syntax has a new command for output sections: ASCIZ 'string'
This will insert a zero-terminated string at the current location.
* Add command-line option, -z nosectionheader, to omit ELF section
header.
- Contains fixes for these non-CVEs (not security bugs per upstreams
SECURITY.md):
* bsc#1209642 aka CVE-2023-1579 aka PR29988
* bsc#1210297 aka CVE-2023-1972 aka PR30285
* bsc#1210733 aka CVE-2023-2222 aka PR29936
* bsc#1213458 aka CVE-2021-32256 aka PR105039 (gcc)
* bsc#1214565 aka CVE-2020-19726 aka PR26240
* bsc#1214567 aka CVE-2022-35206 aka PR29290
* bsc#1214579 aka CVE-2022-35205 aka PR29289
* bsc#1214580 aka CVE-2022-44840 aka PR29732
* bsc#1214604 aka CVE-2022-45703 aka PR29799
* bsc#1214611 aka CVE-2022-48065 aka PR29925
* bsc#1214619 aka CVE-2022-48064 aka PR29922
* bsc#1214620 aka CVE-2022-48063 aka PR29924
* bsc#1214623 aka CVE-2022-47696 aka PR29677
* bsc#1214624 aka CVE-2022-47695 aka PR29846
* bsc#1214625 aka CVE-2022-47673 aka PR29876
- This only existed only for a very short while in SLE-15, as the main
variant in devel:gcc subsumed this in binutils-revert-rela.diff.
Hence:
- Document fixed CVEs:
* bsc#1208037 aka CVE-2023-25588 aka PR29677
* bsc#1208038 aka CVE-2023-25587 aka PR29846
* bsc#1208040 aka CVE-2023-25585 aka PR29892
* bsc#1208409 aka CVE-2023-0687 aka PR29444
- Enable bpf-none cross target and add bpf-none to the multitarget
set of supported targets.
- Disable packed-relative-relocs for old codestreams. They generate
buggy relocations when binutils-revert-rela.diff is active.
[bsc#1206556]
- Disable ZSTD debug section compress by default.
- Enable zstd compression algorithm (instead of zlib)
for debug info sections by default.
- Pack libgprofng only for supported platforms.
- Move libgprofng-related libraries to the proper locations (packages).
- Add --without=bootstrap for skipping of bootstrap (faster testing
of the package).
- Remove broken arm32-avoid-copyreloc.patch to fix [gcc#108515]
Update to version 2.40:
* Objdump has a new command line option --show-all-symbols which will make it
display all symbols that match a given address when disassembling. (Normally
only the first symbol that matches an address is shown).
* Add --enable-colored-disassembly configure time option to enable colored
disassembly output by default, if the output device is a terminal. Note,
this configure option is disabled by default.
* DCO signed contributions are now accepted.
* objcopy --decompress-debug-sections now supports zstd compressed debug
sections. The new option --compress-debug-sections=zstd compresses debug
sections with zstd.
* addr2line and objdump --dwarf now support zstd compressed debug sections.
* The dlltool program now accepts --deterministic-libraries and
--non-deterministic-libraries as command line options to control whether or
not it generates deterministic output libraries. If neither of these options
are used the default is whatever was set when the binutils were configured.
* readelf and objdump now have a newly added option --sframe which dumps the
SFrame section.
* Add support for Intel RAO-INT instructions.
* Add support for Intel AVX-NE-CONVERT instructions.
* Add support for Intel MSRLIST instructions.
* Add support for Intel WRMSRNS instructions.
* Add support for Intel CMPccXADD instructions.
* Add support for Intel AVX-VNNI-INT8 instructions.
* Add support for Intel AVX-IFMA instructions.
* Add support for Intel PREFETCHI instructions.
* Add support for Intel AMX-FP16 instructions.
* gas now supports --compress-debug-sections=zstd to compress
debug sections with zstd.
* Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
that selects the default compression algorithm
for --enable-compressed-debug-sections.
* Add support for various T-Head extensions (XTheadBa, XTheadBb, XTheadBs,
XTheadCmo, XTheadCondMov, XTheadFMemIdx, XTheadFmv, XTheadInt, XTheadMemIdx,
XTheadMemPair, XTheadMac, and XTheadSync) from version 2.0 of the T-Head
ISA manual, which are implemented in the Allwinner D1.
* Add support for the RISC-V Zawrs extension, version 1.0-rc4.
* Add support for Cortex-X1C for Arm.
* New command line option --gsframe to generate SFrame unwind information
on x86_64 and aarch64 targets.
* The linker has a new command line option to suppress the generation of any
warning or error messages. This can be useful when there is a need to create
a known non-working binary. The option is -w or --no-warnings.
* ld now supports zstd compressed debug sections. The new option
--compress-debug-sections=zstd compresses debug sections with zstd.
* Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
that selects the default compression algorithm
for --enable-compressed-debug-sections.
* Remove support for -z bndplt (MPX prefix instructions).
- Includes fixes for these CVEs:
* bsc#1206080 aka CVE-2022-4285 aka PR29699
- Enable by default: --enable-colored-disassembly.
- fix build on x86_64_vX platforms
The following package changes have been done:
- glibc-2.31-150300.58.1 updated
- libcurl4-8.0.1-150400.5.29.1 updated
- libctf-nobfd0-2.41-150100.7.46.1 updated
- libctf0-2.41-150100.7.46.1 updated
- binutils-2.41-150100.7.46.1 updated
- glibc-devel-2.31-150300.58.1 updated
- container:sles15-image-15.0.0-36.5.37 updated
More information about the sle-security-updates
mailing list