SUSE-SU-2017:3170-1: moderate: Security update for binutils
sle-updates at lists.suse.com
sle-updates at lists.suse.com
Thu Nov 30 19:08:59 MST 2017
SUSE Security Update: Security update for binutils
______________________________________________________________________________
Announcement ID: SUSE-SU-2017:3170-1
Rating: moderate
References: #1003846 #1025282 #1029907 #1029908 #1029909
#1029995 #1030296 #1030297 #1030298 #1030583
#1030584 #1030585 #1030588 #1030589 #1031590
#1031593 #1031595 #1031638 #1031644 #1031656
#1033122 #1037052 #1037057 #1037061 #1037062
#1037066 #1037070 #1037072 #1037273 #1038874
#1038875 #1038876 #1038877 #1038878 #1038880
#1038881 #1044891 #1044897 #1044901 #1044909
#1044925 #1044927 #1046094 #1052061 #1052496
#1052503 #1052507 #1052509 #1052511 #1052514
#1052518 #1053347 #1056312 #1056437 #1057139
#1057144 #1057149 #1058480 #1059050 #1060599
#1060621 #1061241 #437293 #445037 #546106
#561142 #578249 #590820 #691290 #698346 #713504
#776968 #863764 #938658 #970239
Cross-References: CVE-2014-9939 CVE-2017-12448 CVE-2017-12450
CVE-2017-12452 CVE-2017-12453 CVE-2017-12454
CVE-2017-12456 CVE-2017-12799 CVE-2017-13757
CVE-2017-14128 CVE-2017-14129 CVE-2017-14130
CVE-2017-14333 CVE-2017-14529 CVE-2017-14729
CVE-2017-14745 CVE-2017-14974 CVE-2017-6965
CVE-2017-6966 CVE-2017-6969 CVE-2017-7209
CVE-2017-7210 CVE-2017-7223 CVE-2017-7224
CVE-2017-7225 CVE-2017-7226 CVE-2017-7227
CVE-2017-7299 CVE-2017-7300 CVE-2017-7301
CVE-2017-7302 CVE-2017-7303 CVE-2017-7304
CVE-2017-7614 CVE-2017-8392 CVE-2017-8393
CVE-2017-8394 CVE-2017-8395 CVE-2017-8396
CVE-2017-8397 CVE-2017-8398 CVE-2017-8421
CVE-2017-9038 CVE-2017-9039 CVE-2017-9040
CVE-2017-9041 CVE-2017-9042 CVE-2017-9043
CVE-2017-9044 CVE-2017-9746 CVE-2017-9747
CVE-2017-9748 CVE-2017-9750 CVE-2017-9755
CVE-2017-9756 CVE-2017-9954 CVE-2017-9955
Affected Products:
SUSE Linux Enterprise Software Development Kit 12-SP3
SUSE Linux Enterprise Software Development Kit 12-SP2
SUSE Linux Enterprise Server for SAP 12-SP1
SUSE Linux Enterprise Server for Raspberry Pi 12-SP2
SUSE Linux Enterprise Server 12-SP3
SUSE Linux Enterprise Server 12-SP2
SUSE Linux Enterprise Desktop 12-SP3
SUSE Linux Enterprise Desktop 12-SP2
OpenStack Cloud Magnum Orchestration 7
______________________________________________________________________________
An update that solves 57 vulnerabilities and has 18 fixes
is now available.
Description:
GNU binutil was updated to the 2.29.1 release, bringing various new
features, fixing a lot of bugs and security issues.
Following security issues are being addressed by this release:
* 18750 bsc#1030296 CVE-2014-9939
* 20891 bsc#1030585 CVE-2017-7225
* 20892 bsc#1030588 CVE-2017-7224
* 20898 bsc#1030589 CVE-2017-7223
* 20905 bsc#1030584 CVE-2017-7226
* 20908 bsc#1031644 CVE-2017-7299
* 20909 bsc#1031656 CVE-2017-7300
* 20921 bsc#1031595 CVE-2017-7302
* 20922 bsc#1031593 CVE-2017-7303
* 20924 bsc#1031638 CVE-2017-7301
* 20931 bsc#1031590 CVE-2017-7304
* 21135 bsc#1030298 CVE-2017-7209
* 21137 bsc#1029909 CVE-2017-6965
* 21139 bsc#1029908 CVE-2017-6966
* 21156 bsc#1029907 CVE-2017-6969
* 21157 bsc#1030297 CVE-2017-7210
* 21409 bsc#1037052 CVE-2017-8392
* 21412 bsc#1037057 CVE-2017-8393
* 21414 bsc#1037061 CVE-2017-8394
* 21432 bsc#1037066 CVE-2017-8396
* 21440 bsc#1037273 CVE-2017-8421
* 21580 bsc#1044891 CVE-2017-9746
* 21581 bsc#1044897 CVE-2017-9747
* 21582 bsc#1044901 CVE-2017-9748
* 21587 bsc#1044909 CVE-2017-9750
* 21594 bsc#1044925 CVE-2017-9755
* 21595 bsc#1044927 CVE-2017-9756
* 21787 bsc#1052518 CVE-2017-12448
* 21813 bsc#1052503, CVE-2017-12456, bsc#1052507, CVE-2017-12454,
bsc#1052509, CVE-2017-12453, bsc#1052511, CVE-2017-12452, bsc#1052514,
CVE-2017-12450, bsc#1052503, CVE-2017-12456, bsc#1052507,
CVE-2017-12454, bsc#1052509, CVE-2017-12453, bsc#1052511,
CVE-2017-12452, bsc#1052514, CVE-2017-12450
* 21933 bsc#1053347 CVE-2017-12799
* 21990 bsc#1058480 CVE-2017-14333
* 22018 bsc#1056312 CVE-2017-13757
* 22047 bsc#1057144 CVE-2017-14129
* 22058 bsc#1057149 CVE-2017-14130
* 22059 bsc#1057139 CVE-2017-14128
* 22113 bsc#1059050 CVE-2017-14529
* 22148 bsc#1060599 CVE-2017-14745
* 22163 bsc#1061241 CVE-2017-14974
* 22170 bsc#1060621 CVE-2017-14729
Update to binutils 2.29. [fate#321454, fate#321494, fate#323293]:
* The MIPS port now supports microMIPS eXtended Physical Addressing
(XPA) instructions for assembly and disassembly.
* The MIPS port now supports the microMIPS Release 5 ISA for assembly
and disassembly.
* The MIPS port now supports the Imagination interAptiv MR2 processor,
which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple
of implementation-specific regular MIPS and MIPS16e2 ASE instructions.
* The SPARC port now supports the SPARC M8 processor, which implements
the Oracle SPARC Architecture 2017.
* The MIPS port now supports the MIPS16e2 ASE for assembly and
disassembly.
* Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
* Add support for the wasm32 ELF conversion of the WebAssembly file
format.
* Add --inlines option to objdump, which extends the --line-numbers
option so that inlined functions will display their nesting
information.
* Add --merge-notes options to objcopy to reduce the size of notes in a
binary file by merging and deleting redundant notes.
* Add support for locating separate debug info files using the build-id
method, where the separate file has a name based upon the build-id of
the original file.
- GAS specific:
* Add support for ELF SHF_GNU_MBIND.
* Add support for the WebAssembly file format and wasm32 ELF conversion.
* PowerPC gas now checks that the correct register class is used in
instructions. For instance, "addi %f4,%cr3,%r31" warns three times
that the registers are invalid.
* Add support for the Texas Instruments PRU processor.
* Support for the ARMv8-R architecture and Cortex-R52 processor has been
added to the ARM port.
- GNU ld specific:
* Support for -z shstk in the x86 ELF linker to generate
GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program properties.
* Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program
properties in the x86 ELF linker.
* Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
properties in the x86 ELF linker.
* Support for -z ibtplt in the x86 ELF linker to generate IBT-enabled
PLT.
* Support for -z ibt in the x86 ELF linker to generate IBT-enabled PLT
as well as GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
properties.
* Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
* Add support for ELF GNU program properties.
* Add support for the Texas Instruments PRU processor.
* When configuring for arc*-*-linux* targets the default linker
emulation will change if --with-cpu=nps400 is used at configure time.
* Improve assignment of LMAs to orphan sections in some edge cases where
a mixture of both AT>LMA_REGION and AT(LMA) are used.
* Orphan sections placed after an empty section that has an AT(LMA) will
now take an load memory address starting from LMA.
* Section groups can now be resolved (the group deleted and the group
members placed like normal sections) at partial link time either using
the new linker option --force-group-allocation or by placing
FORCE_GROUP_ALLOCATION into the linker script.
- Add riscv64 target, tested with gcc7 and downstream newlib 2.4.0
- Prepare riscv32 target (gh#riscv/riscv-newlib#8)
- Make compressed debug section handling explicit, disable for
old products and enable for gas on all architectures otherwise.
[bsc#1029995]
- Remove empty rpath component removal optimization from to workaround
CMake rpath handling. [bsc#1025282]
Minor security bugs fixed: PR 21147, PR 21148, PR 21149, PR 21150, PR
21151, PR 21155, PR 21158, PR 21159
- Update to binutils 2.28.
* Add support for locating separate debug info files using the build-id
method, where the separate file has a name based upon the build-id of
the original file.
* This version of binutils fixes a problem with PowerPC VLE 16A and 16D
relocations which were functionally swapped, for example,
R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D
performed like R_PPC_VLE_HA16A. This could have been fixed by
renumbering relocations, which would keep object files created by an
older version of gas compatible with a newer ld. However, that would
require an ABI update, affecting other assemblers and linkers that
create and process the relocations correctly. It is recommended that
all VLE object files be recompiled, but ld can modify the relocations
if --vle-reloc-fixup is passed to ld. If the new ld command line
option is not used, ld will ld warn on finding relocations
inconsistent with the instructions being relocated.
* The nm program has a new command line option (--with-version-strings)
which will display a symbol's version information, if any, after the
symbol's name.
* The ARC port of objdump now accepts a -M option to specify the extra
instruction class(es) that should be disassembled.
* The --remove-section option for objcopy and strip now accepts section
patterns starting with an exclamation point to indicate a non-matching
section. A non-matching section is removed from the set of sections
matched by an earlier --remove-section pattern.
* The --only-section option for objcopy now accepts section patterns
starting with an exclamation point to indicate a non-matching section.
A non-matching section is removed from the set of sections matched by
an earlier --only-section pattern.
* New --remove-relocations=SECTIONPATTERN option for objcopy and strip.
This option can be used to remove sections containing relocations. The
SECTIONPATTERN is the section to which the relocations apply, not the
relocation section itself.
- GAS specific:
* Add support for the RISC-V architecture.
* Add support for the ARM Cortex-M23 and Cortex-M33 processors.
- GNU ld specific:
* The EXCLUDE_FILE linker script construct can now be applied outside of
the section list in order for the exclusions to apply over all input
sections in the list.
* Add support for the RISC-V architecture.
* The command line option --no-eh-frame-hdr can now be used in ELF based
linkers to disable the automatic generation of .eh_frame_hdr sections.
* Add --in-implib=<infile> to the ARM linker to enable specifying a set
of Secure Gateway veneers that must exist in the output import library
specified by --out-implib=<outfile> and the address they must have. As
such, --in-implib is only supported in combination with --cmse-implib.
* Extended the --out-implib=<file> option, previously restricted to x86
PE targets, to any ELF based target. This allows the generation of an
import library for an ELF executable, which can then be used by
another application to link against the executable.
- GOLD specific:
* Add -z bndplt option (x86-64 only) to support Intel MPX.
* Add --orphan-handling option.
* Add --stub-group-multi option (PowerPC only).
* Add --target1-rel, --target1-abs, --target2 options (Arm only).
* Add -z stack-size option.
* Add --be8 option (Arm only).
* Add HIDDEN support in linker scripts.
* Add SORT_BY_INIT_PRIORITY support in linker scripts.
- Other fixes:
* Fix section alignment on .gnu_debuglink. [bso#21193]
* Add s390x to gold_archs.
* Fix alignment frags for aarch64 (bsc#1003846)
* Call ldconfig for libbfd
* Fix an assembler problem with clang on ARM.
* Restore monotonically increasing section offsets.
- Update to binutils 2.27.
* Add a configure option, --enable-64-bit-archive, to force use of a
64-bit format when creating an archive symbol index.
* Add --elf-stt-common= option to objcopy for ELF targets to control
whether to convert common symbols to the STT_COMMON type.
- GAS specific:
* Default to --enable-compressed-debug-sections=gas for Linux/x86
targets.
* Add --no-pad-sections to stop the assembler from padding the end of
output sections up to their alignment boundary.
* Support for the ARMv8-M architecture has been added to the ARM port.
Support for the ARMv8-M Security and DSP Extensions has also been
added to the ARM port.
* ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister,
and .extCoreRegister pseudo-ops that allow an user to define custom
instructions, conditional codes, auxiliary and core registers.
* Add a configure option --enable-elf-stt-common to decide whether ELF
assembler should generate common symbols with the STT_COMMON type by
default. Default to no.
* New command line option --elf-stt-common= for ELF targets to control
whether to generate common symbols with the STT_COMMON type.
* Add ability to set section flags and types via numeric values for ELF
based targets.
* Add a configure option --enable-x86-relax-relocations to decide
whether x86 assembler should generate relax relocations by default.
Default to yes, except for x86 Solaris targets older than Solaris 12.
* New command line option -mrelax-relocations= for x86 target to control
whether to generate relax relocations.
* New command line option -mfence-as-lock-add=yes for x86 target to
encode lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)".
* Add assembly-time relaxation option for ARC cpus.
* Add --with-cpu=TYPE configure option for ARC gas. This allows the
default cpu type to be adjusted at configure time.
- GOLD specific:
* Add a configure option --enable-relro to decide whether -z relro
should be enabled by default. Default to yes.
* Add support for s390, MIPS, AArch64, and TILE-Gx architectures.
* Add support for STT_GNU_IFUNC symbols.
* Add support for incremental linking (--incremental).
- GNU ld specific:
* Add a configure option --enable-relro to decide whether -z relro
should be enabled in ELF linker by default. Default to yes for all
Linux targets except FRV, HPPA, IA64 and MIPS.
* Support for -z noreloc-overflow in the x86-64 ELF linker to disable
relocation overflow check.
* Add -z common/-z nocommon options for ELF targets to control whether
to convert common symbols to the STT_COMMON type during a relocatable
link.
* Support for -z nodynamic-undefined-weak in the x86 ELF linker, which
avoids dynamic relocations against undefined weak symbols in
executable.
* The NOCROSSREFSTO command was added to the linker script language.
* Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply
link-time values for dynamic relocations.
Patch Instructions:
To install this SUSE Security Update use YaST online_update.
Alternatively you can run the command listed for your product:
- SUSE Linux Enterprise Software Development Kit 12-SP3:
zypper in -t patch SUSE-SLE-SDK-12-SP3-2017-1971=1
- SUSE Linux Enterprise Software Development Kit 12-SP2:
zypper in -t patch SUSE-SLE-SDK-12-SP2-2017-1971=1
- SUSE Linux Enterprise Server for SAP 12-SP1:
zypper in -t patch SUSE-SLE-SAP-12-SP1-2017-1971=1
- SUSE Linux Enterprise Server for Raspberry Pi 12-SP2:
zypper in -t patch SUSE-SLE-RPI-12-SP2-2017-1971=1
- SUSE Linux Enterprise Server 12-SP3:
zypper in -t patch SUSE-SLE-SERVER-12-SP3-2017-1971=1
- SUSE Linux Enterprise Server 12-SP2:
zypper in -t patch SUSE-SLE-SERVER-12-SP2-2017-1971=1
- SUSE Linux Enterprise Desktop 12-SP3:
zypper in -t patch SUSE-SLE-DESKTOP-12-SP3-2017-1971=1
- SUSE Linux Enterprise Desktop 12-SP2:
zypper in -t patch SUSE-SLE-DESKTOP-12-SP2-2017-1971=1
- OpenStack Cloud Magnum Orchestration 7:
zypper in -t patch SUSE-OpenStack-Cloud-Magnum-Orchestration-7-2017-1971=1
To bring your system up-to-date, use "zypper patch".
Package List:
- SUSE Linux Enterprise Software Development Kit 12-SP3 (aarch64 ppc64le s390x x86_64):
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
binutils-devel-2.29.1-9.20.2
cross-ppc-binutils-2.29.1-9.20.2
cross-ppc-binutils-debuginfo-2.29.1-9.20.2
cross-ppc-binutils-debugsource-2.29.1-9.20.2
cross-spu-binutils-2.29.1-9.20.2
cross-spu-binutils-debuginfo-2.29.1-9.20.2
cross-spu-binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Software Development Kit 12-SP3 (aarch64 ppc64le x86_64):
binutils-gold-2.29.1-9.20.2
binutils-gold-debuginfo-2.29.1-9.20.2
- SUSE Linux Enterprise Software Development Kit 12-SP2 (aarch64 ppc64le s390x x86_64):
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
binutils-devel-2.29.1-9.20.2
cross-ppc-binutils-2.29.1-9.20.2
cross-ppc-binutils-debuginfo-2.29.1-9.20.2
cross-ppc-binutils-debugsource-2.29.1-9.20.2
cross-spu-binutils-2.29.1-9.20.2
cross-spu-binutils-debuginfo-2.29.1-9.20.2
cross-spu-binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Software Development Kit 12-SP2 (aarch64 ppc64le x86_64):
binutils-gold-2.29.1-9.20.2
binutils-gold-debuginfo-2.29.1-9.20.2
- SUSE Linux Enterprise Server for SAP 12-SP1 (ppc64le x86_64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Server for Raspberry Pi 12-SP2 (aarch64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Server 12-SP3 (aarch64 ppc64le s390x x86_64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Server 12-SP2 (aarch64 ppc64le s390x x86_64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Desktop 12-SP3 (x86_64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
- SUSE Linux Enterprise Desktop 12-SP2 (x86_64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
- OpenStack Cloud Magnum Orchestration 7 (x86_64):
binutils-2.29.1-9.20.2
binutils-debuginfo-2.29.1-9.20.2
binutils-debugsource-2.29.1-9.20.2
References:
https://www.suse.com/security/cve/CVE-2014-9939.html
https://www.suse.com/security/cve/CVE-2017-12448.html
https://www.suse.com/security/cve/CVE-2017-12450.html
https://www.suse.com/security/cve/CVE-2017-12452.html
https://www.suse.com/security/cve/CVE-2017-12453.html
https://www.suse.com/security/cve/CVE-2017-12454.html
https://www.suse.com/security/cve/CVE-2017-12456.html
https://www.suse.com/security/cve/CVE-2017-12799.html
https://www.suse.com/security/cve/CVE-2017-13757.html
https://www.suse.com/security/cve/CVE-2017-14128.html
https://www.suse.com/security/cve/CVE-2017-14129.html
https://www.suse.com/security/cve/CVE-2017-14130.html
https://www.suse.com/security/cve/CVE-2017-14333.html
https://www.suse.com/security/cve/CVE-2017-14529.html
https://www.suse.com/security/cve/CVE-2017-14729.html
https://www.suse.com/security/cve/CVE-2017-14745.html
https://www.suse.com/security/cve/CVE-2017-14974.html
https://www.suse.com/security/cve/CVE-2017-6965.html
https://www.suse.com/security/cve/CVE-2017-6966.html
https://www.suse.com/security/cve/CVE-2017-6969.html
https://www.suse.com/security/cve/CVE-2017-7209.html
https://www.suse.com/security/cve/CVE-2017-7210.html
https://www.suse.com/security/cve/CVE-2017-7223.html
https://www.suse.com/security/cve/CVE-2017-7224.html
https://www.suse.com/security/cve/CVE-2017-7225.html
https://www.suse.com/security/cve/CVE-2017-7226.html
https://www.suse.com/security/cve/CVE-2017-7227.html
https://www.suse.com/security/cve/CVE-2017-7299.html
https://www.suse.com/security/cve/CVE-2017-7300.html
https://www.suse.com/security/cve/CVE-2017-7301.html
https://www.suse.com/security/cve/CVE-2017-7302.html
https://www.suse.com/security/cve/CVE-2017-7303.html
https://www.suse.com/security/cve/CVE-2017-7304.html
https://www.suse.com/security/cve/CVE-2017-7614.html
https://www.suse.com/security/cve/CVE-2017-8392.html
https://www.suse.com/security/cve/CVE-2017-8393.html
https://www.suse.com/security/cve/CVE-2017-8394.html
https://www.suse.com/security/cve/CVE-2017-8395.html
https://www.suse.com/security/cve/CVE-2017-8396.html
https://www.suse.com/security/cve/CVE-2017-8397.html
https://www.suse.com/security/cve/CVE-2017-8398.html
https://www.suse.com/security/cve/CVE-2017-8421.html
https://www.suse.com/security/cve/CVE-2017-9038.html
https://www.suse.com/security/cve/CVE-2017-9039.html
https://www.suse.com/security/cve/CVE-2017-9040.html
https://www.suse.com/security/cve/CVE-2017-9041.html
https://www.suse.com/security/cve/CVE-2017-9042.html
https://www.suse.com/security/cve/CVE-2017-9043.html
https://www.suse.com/security/cve/CVE-2017-9044.html
https://www.suse.com/security/cve/CVE-2017-9746.html
https://www.suse.com/security/cve/CVE-2017-9747.html
https://www.suse.com/security/cve/CVE-2017-9748.html
https://www.suse.com/security/cve/CVE-2017-9750.html
https://www.suse.com/security/cve/CVE-2017-9755.html
https://www.suse.com/security/cve/CVE-2017-9756.html
https://www.suse.com/security/cve/CVE-2017-9954.html
https://www.suse.com/security/cve/CVE-2017-9955.html
https://bugzilla.suse.com/1003846
https://bugzilla.suse.com/1025282
https://bugzilla.suse.com/1029907
https://bugzilla.suse.com/1029908
https://bugzilla.suse.com/1029909
https://bugzilla.suse.com/1029995
https://bugzilla.suse.com/1030296
https://bugzilla.suse.com/1030297
https://bugzilla.suse.com/1030298
https://bugzilla.suse.com/1030583
https://bugzilla.suse.com/1030584
https://bugzilla.suse.com/1030585
https://bugzilla.suse.com/1030588
https://bugzilla.suse.com/1030589
https://bugzilla.suse.com/1031590
https://bugzilla.suse.com/1031593
https://bugzilla.suse.com/1031595
https://bugzilla.suse.com/1031638
https://bugzilla.suse.com/1031644
https://bugzilla.suse.com/1031656
https://bugzilla.suse.com/1033122
https://bugzilla.suse.com/1037052
https://bugzilla.suse.com/1037057
https://bugzilla.suse.com/1037061
https://bugzilla.suse.com/1037062
https://bugzilla.suse.com/1037066
https://bugzilla.suse.com/1037070
https://bugzilla.suse.com/1037072
https://bugzilla.suse.com/1037273
https://bugzilla.suse.com/1038874
https://bugzilla.suse.com/1038875
https://bugzilla.suse.com/1038876
https://bugzilla.suse.com/1038877
https://bugzilla.suse.com/1038878
https://bugzilla.suse.com/1038880
https://bugzilla.suse.com/1038881
https://bugzilla.suse.com/1044891
https://bugzilla.suse.com/1044897
https://bugzilla.suse.com/1044901
https://bugzilla.suse.com/1044909
https://bugzilla.suse.com/1044925
https://bugzilla.suse.com/1044927
https://bugzilla.suse.com/1046094
https://bugzilla.suse.com/1052061
https://bugzilla.suse.com/1052496
https://bugzilla.suse.com/1052503
https://bugzilla.suse.com/1052507
https://bugzilla.suse.com/1052509
https://bugzilla.suse.com/1052511
https://bugzilla.suse.com/1052514
https://bugzilla.suse.com/1052518
https://bugzilla.suse.com/1053347
https://bugzilla.suse.com/1056312
https://bugzilla.suse.com/1056437
https://bugzilla.suse.com/1057139
https://bugzilla.suse.com/1057144
https://bugzilla.suse.com/1057149
https://bugzilla.suse.com/1058480
https://bugzilla.suse.com/1059050
https://bugzilla.suse.com/1060599
https://bugzilla.suse.com/1060621
https://bugzilla.suse.com/1061241
https://bugzilla.suse.com/437293
https://bugzilla.suse.com/445037
https://bugzilla.suse.com/546106
https://bugzilla.suse.com/561142
https://bugzilla.suse.com/578249
https://bugzilla.suse.com/590820
https://bugzilla.suse.com/691290
https://bugzilla.suse.com/698346
https://bugzilla.suse.com/713504
https://bugzilla.suse.com/776968
https://bugzilla.suse.com/863764
https://bugzilla.suse.com/938658
https://bugzilla.suse.com/970239
More information about the sle-updates
mailing list