SUSE-CU-2021:507-1: Security update of bci/golang
sle-updates at lists.suse.com
sle-updates at lists.suse.com
Sat Nov 13 07:31:09 UTC 2021
SUSE Container Update Advisory: bci/golang
-----------------------------------------------------------------
Container Advisory ID : SUSE-CU-2021:507-1
Container Tags : bci/golang:1.17
Container Release : 3.1
Severity : moderate
Type : security
References : 1179898 1179899 1179900 1179901 1179902 1179903 1180451 1180454
1180461 1181452 1182252 1183511 1183909 1184519 1184620 1184794
1188941 1191473 1192267 CVE-2020-16590 CVE-2020-16591 CVE-2020-16592
CVE-2020-16593 CVE-2020-16598 CVE-2020-16599 CVE-2020-35448 CVE-2020-35493
CVE-2020-35496 CVE-2020-35507 CVE-2021-20197 CVE-2021-20284 CVE-2021-20294
CVE-2021-3487
-----------------------------------------------------------------
The container bci/golang was updated. The following patches have been included in this update:
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2021:3616-1
Released: Thu Nov 4 12:29:16 2021
Summary: Security update for binutils
Type: security
Severity: moderate
References: 1179898,1179899,1179900,1179901,1179902,1179903,1180451,1180454,1180461,1181452,1182252,1183511,1184620,1184794,CVE-2020-16590,CVE-2020-16591,CVE-2020-16592,CVE-2020-16593,CVE-2020-16598,CVE-2020-16599,CVE-2020-35448,CVE-2020-35493,CVE-2020-35496,CVE-2020-35507,CVE-2021-20197,CVE-2021-20284,CVE-2021-3487
This update for binutils fixes the following issues:
Update to binutils 2.37:
* The GNU Binutils sources now requires a C99 compiler and library to
build.
* Support for Realm Management Extension (RME) for AArch64 has been
added.
* A new linker option '-z report-relative-reloc' for x86 ELF targets
has been added to report dynamic relative relocations.
* A new linker option '-z start-stop-gc' has been added to disable
special treatment of __start_*/__stop_* references when
--gc-sections.
* A new linker options '-Bno-symbolic' has been added which will
cancel the '-Bsymbolic' and '-Bsymbolic-functions' options.
* The readelf tool has a new command line option which can be used to
specify how the numeric values of symbols are reported.
--sym-base=0|8|10|16 tells readelf to display the values in base 8,
base 10 or base 16. A sym base of 0 represents the default action
of displaying values under 10000 in base 10 and values above that in
base 16.
* A new format has been added to the nm program. Specifying
'--format=just-symbols' (or just using -j) will tell the program to
only display symbol names and nothing else.
* A new command line option '--keep-section-symbols' has been added to
objcopy and strip. This stops the removal of unused section symbols
when the file is copied. Removing these symbols saves space, but
sometimes they are needed by other tools.
* The '--weaken', '--weaken-symbol' and '--weaken-symbols' options
supported by objcopy now make undefined symbols weak on targets that
support weak symbols.
* Readelf and objdump can now display and use the contents of .debug_sup
sections.
* Readelf and objdump will now follow links to separate debug info
files by default. This behaviour can be stopped via the use of the
new '-wN' or '--debug-dump=no-follow-links' options for readelf and
the '-WN' or '--dwarf=no-follow-links' options for objdump. Also
the old behaviour can be restored by the use of the
'--enable-follow-debug-links=no' configure time option.
The semantics of the =follow-links option have also been slightly
changed. When enabled, the option allows for the loading of symbol
tables and string tables from the separate files which can be used
to enhance the information displayed when dumping other sections,
but it does not automatically imply that information from the
separate files should be displayed.
If other debug section display options are also enabled (eg
'--debug-dump=info') then the contents of matching sections in both
the main file and the separate debuginfo file *will* be displayed.
This is because in most cases the debug section will only be present
in one of the files.
If however non-debug section display options are enabled (eg
'--sections') then the contents of matching parts of the separate
debuginfo file will *not* be displayed. This is because in most
cases the user probably only wanted to load the symbol information
from the separate debuginfo file. In order to change this behaviour
a new command line option --process-links can be used. This will
allow di0pslay options to applied to both the main file and any
separate debuginfo files.
* Nm has a new command line option: '--quiet'. This suppresses 'no
symbols' diagnostic.
Update to binutils 2.36:
New features in the Assembler:
- General:
* When setting the link order attribute of ELF sections, it is now
possible to use a numeric section index instead of symbol name.
* Added a .nop directive to generate a single no-op instruction in
a target neutral manner. This instruction does have an effect on
DWARF line number generation, if that is active.
* Removed --reduce-memory-overheads and --hash-size as gas now
uses hash tables that can be expand and shrink automatically.
- X86/x86_64:
* Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key
Locker instructions.
* Support non-absolute segment values for lcall and ljmp.
* Add {disp16} pseudo prefix to x86 assembler.
* Configure with --enable-x86-used-note by default for Linux/x86.
- ARM/AArch64:
* Add support for Cortex-A78, Cortex-A78AE and Cortex-X1,
Cortex-R82, Neoverse V1, and Neoverse N2 cores.
* Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded
Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call
Stack Recorder Extension) and BRBE (Branch Record Buffer
Extension) system registers.
* Add support for Armv8-R and Armv8.7-A ISA extensions.
* Add support for DSB memory nXS barrier, WFET and WFIT
instruction for Armv8.7.
* Add support for +csre feature for -march. Add CSR PDEC
instruction for CSRE feature in AArch64.
* Add support for +flagm feature for -march in Armv8.4 AArch64.
* Add support for +ls64 feature for -march in Armv8.7
AArch64. Add atomic 64-byte load/store instructions for this
feature.
* Add support for +pauth (Pointer Authentication) feature for
-march in AArch64.
New features in the Linker:
* Add --error-handling-script=<NAME> command line option to allow
a helper script to be invoked when an undefined symbol or a
missing library is encountered. This option can be suppressed
via the configure time switch: --enable-error-handling-script=no.
* Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark
x86-64-{baseline|v[234]} ISA level as needed.
* Add -z unique-symbol to avoid duplicated local symbol names.
* The creation of PE format DLLs now defaults to using a more
secure set of DLL characteristics.
* The linker now deduplicates the types in .ctf sections. The new
command-line option --ctf-share-types describes how to do this:
its default value, share-unconflicted, produces the most compact
output.
* The linker now omits the 'variable section' from .ctf sections
by default, saving space. This is almost certainly what you
want unless you are working on a project that has its own
analogue of symbol tables that are not reflected in the ELF
symtabs.
New features in other binary tools:
* The ar tool's previously unused l modifier is now used for
specifying dependencies of a static library. The arguments of
this option (or --record-libdeps long form option) will be
stored verbatim in the __.LIBDEP member of the archive, which
the linker may read at link time.
* Readelf can now display the contents of LTO symbol table
sections when asked to do so via the --lto-syms command line
option.
* Readelf now accepts the -C command line option to enable the
demangling of symbol names. In addition the --demangle=<style>,
--no-demangle, --recurse-limit and --no-recurse-limit options
are also now availale.
The following security fixes are addressed by the update:
- CVE-2021-20197: Fixed a race condition which allows users to own arbitrary files (bsc#1181452).
- CVE-2021-20284: Fixed a heap-based buffer overflow in _bfd_elf_slurp_secondary_reloc_section in elf.c (bsc#1183511).
- CVE-2021-3487: Fixed a denial of service via excessive debug section size causing excessive memory consumption in bfd's dwarf2.c read_section() (bsc#1184620).
- CVE-2020-35448: Fixed a heap-based buffer over-read in bfd_getl_signed_32() in libbfd.c (bsc#1184794).
- CVE-2020-16590: Fixed a double free vulnerability in process_symbol_table() (bsc#1179898).
- CVE-2020-16591: Fixed an invalid read in process_symbol_table() (bsc#1179899).
- CVE-2020-16592: Fixed an use-after-free in bfd_hash_lookup() (bsc#1179900).
- CVE-2020-16593: Fixed a null pointer dereference in scan_unit_for_symbols() (bsc#1179901).
- CVE-2020-16598: Fixed a null pointer dereference in debug_get_real_type() (bsc#1179902).
- CVE-2020-16599: Fixed a null pointer dereference in _bfd_elf_get_symbol_version_string() (bsc#1179903)
- CVE-2020-35493: Fixed heap-based buffer overflow in bfd_pef_parse_function_stubs function in bfd/pef.c via crafted PEF file (bsc#1180451).
- CVE-2020-35496: Fixed multiple null pointer dereferences in bfd module due to not checking return value of bfd_malloc (bsc#1180454).
- CVE-2020-35507: Fixed a null pointer dereference in bfd_pef_parse_function_stubs() (bsc#1180461).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2021:3643-1
Released: Tue Nov 9 19:32:18 2021
Summary: Security update for binutils
Type: security
Severity: moderate
References: 1183909,1184519,1188941,1191473,1192267,CVE-2021-20294
This update for binutils fixes the following issues:
- For compatibility on old code stream that expect 'brcl 0,label' to
not be disassembled as 'jgnop label' on s390x. (bsc#1192267)
This reverts IBM zSeries HLASM support for now.
- Fixed that ppc64 optflags did not enable LTO (bsc#1188941).
- Fix empty man-pages from broken release tarball
- Fixed a memory corruption with rpath option (bsc#1191473).
- Fixed slow performance of stripping some binaries (bsc#1183909).
Security issue fixed:
- CVE-2021-20294: Fixed out-of-bounds write in print_dynamic_symbol in readelf (bnc#1184519)
The following package changes have been done:
- binutils-2.37-7.26.1 updated
- libctf-nobfd0-2.37-7.26.1 updated
- libctf0-2.37-7.26.1 updated
- container:sles15-image-15.0.0-17.8.31 updated
More information about the sle-updates
mailing list