SUSE-IU-2022:358-1: Security update of suse-sles-15-sp3-chost-byos-v20220310-hvm-ssd-x86_64
sle-updates at lists.suse.com
sle-updates at lists.suse.com
Sat Mar 12 07:33:17 UTC 2022
SUSE Image Update Advisory: suse-sles-15-sp3-chost-byos-v20220310-hvm-ssd-x86_64
-----------------------------------------------------------------
Image Advisory ID : SUSE-IU-2022:358-1
Image Tags : suse-sles-15-sp3-chost-byos-v20220310-hvm-ssd-x86_64:20220310
Image Release :
Severity : important
Type : security
References : 1089644 1154353 1157038 1157923 1176447 1176804 1176940 1177598
1178134 1181147 1181588 1181640 1181703 1182998 1183872 1187512
1187716 1188348 1188404 1188507 1188520 1188914 1189126 1190447
1190533 1190570 1190812 1190972 1191580 1191655 1191741 1191893
1192210 1192478 1192481 1192483 1192862 1192954 1193096 1193166
1193233 1193243 1193273 1193294 1193298 1193632 1193787 1194163
1194216 1194265 1194556 1194669 1194845 1194967 1194976 1195004
1195012 1195066 1195081 1195095 1195096 1195126 1195202 1195286
1195326 1195352 1195356 1195378 1195506 1195516 1195543 1195654
1195668 1195701 1195798 1195799 1195823 1195825 1195908 1195928
1195947 1195957 1195995 1196025 1196026 1196036 1196167 1196168
1196169 1196171 1196195 1196235 1196339 1196373 1196400 1196403
1196441 1196494 1196495 1196516 1196584 1196585 1196601 1196612
1196776 1196825 CVE-2018-16301 CVE-2020-14370 CVE-2020-15157
CVE-2021-20199 CVE-2021-20291 CVE-2021-3602 CVE-2021-3778 CVE-2021-3796
CVE-2021-3872 CVE-2021-3927 CVE-2021-3928 CVE-2021-3984 CVE-2021-3995
CVE-2021-3996 CVE-2021-4019 CVE-2021-4024 CVE-2021-41190 CVE-2021-4193
CVE-2021-4209 CVE-2021-46059 CVE-2022-0001 CVE-2022-0002 CVE-2022-0318
CVE-2022-0319 CVE-2022-0351 CVE-2022-0361 CVE-2022-0413 CVE-2022-0492
CVE-2022-0516 CVE-2022-0847 CVE-2022-23648 CVE-2022-24407 CVE-2022-25235
CVE-2022-25236 CVE-2022-25313 CVE-2022-25314 CVE-2022-25315 CVE-2022-25375
-----------------------------------------------------------------
The container suse-sles-15-sp3-chost-byos-v20220310-hvm-ssd-x86_64 was updated. The following patches have been included in this update:
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2021:2626-1
Released: Thu Aug 5 12:10:35 2021
Summary: Recommended maintenance update for libeconf
Type: recommended
Severity: moderate
References: 1188348
This update for libeconf fixes the following issue:
- Solve a downgrade issue between SUSE Linux Enterprise SP3 and lower (bsc#1188348)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:604-1
Released: Tue Mar 1 07:13:50 2022
Summary: Recommended update for rsyslog
Type: recommended
Severity: low
References: 1194669
This update for rsyslog fixes the following issues:
- update config example in remote.conf to match upstream documentation (bsc#1194669)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:674-1
Released: Wed Mar 2 13:24:38 2022
Summary: Recommended update for yast2-network
Type: recommended
Severity: moderate
References: 1187512
This update for yast2-network fixes the following issues:
- Don't crash at the end of installation when storing wifi configuration for NetworkManager. (bsc#1187512)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:682-1
Released: Thu Mar 3 11:37:03 2022
Summary: Recommended update for supportutils-plugin-suse-public-cloud
Type: recommended
Severity: important
References: 1195095,1195096
This update for supportutils-plugin-suse-public-cloud fixes the following issues:
- Update to version 1.0.6 (bsc#1195095, bsc#1195096)
- Include cloud-init logs whenever they are present
- Update the packages we track in AWS, Azure, and Google
- Include the ecs logs for AWS ECS instances
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:692-1
Released: Thu Mar 3 15:46:47 2022
Summary: Recommended update for filesystem
Type: recommended
Severity: moderate
References: 1190447
This update for filesystem fixes the following issues:
- Release ported filesystem to LTSS channels (bsc#1190447).
-----------------------------------------------------------------
Advisory ID: 23018
Released: Fri Mar 4 08:31:54 2022
Summary: Security update for conmon, libcontainers-common, libseccomp, podman
Type: security
Severity: moderate
References: 1176804,1177598,1181640,1182998,1188520,1188914,1193166,1193273,CVE-2020-14370,CVE-2020-15157,CVE-2021-20199,CVE-2021-20291,CVE-2021-3602,CVE-2021-4024,CVE-2021-41190
This update for conmon, libcontainers-common, libseccomp, podman fixes the following issues:
podman was updated to 3.4.4.
Security issues fixed:
- fix CVE-2021-41190 [bsc#1193273], opencontainers: OCI manifest and index parsing confusion
- fix CVE-2021-4024 [bsc#1193166], podman machine spawns gvproxy with port binded to all IPs
- fix CVE-2021-20199 [bsc#1181640], Remote traffic to rootless containers is seen as orginating from localhost
- Add: Provides: podman:/usr/bin/podman-remote subpackage for a clearer upgrade
path from podman < 3.1.2
Update to version 3.4.4:
* Bugfixes
- Fixed a bug where the podman exec command would, under some circumstances,
print a warning message about failing to move conmon to the appropriate cgroup (#12535).
- Fixed a bug where named volumes created as part of container creation
(e.g. podman run --volume avolume:/a/mountpoint or similar) would be
mounted with incorrect permissions (#12523).
- Fixed a bug where the podman-remote create and podman-remote run commands
did not properly handle the --entrypoint='' option (to clear the container's entrypoint) (#12521).
- Update to version 3.4.3:
* Security
- This release addresses CVE-2021-4024, where the podman machine command opened the gvproxy API (used to forward ports to podman machine VMs) to the public internet on port 7777.
- This release addresses CVE-2021-41190, where incomplete specification of behavior regarding image manifests could lead to inconsistent decoding on different clients.
* Features
- The --secret type=mount option to podman create and podman run supports a new option, target=, which specifies where in the container the secret will be mounted (#12287).
* Bugfixes
- Fixed a bug where rootless Podman would occasionally print warning messages about failing to move the pause process to a new cgroup (#12065).
- Fixed a bug where the podman run and podman create commands would, when pulling images, still require TLS even with registries set to Insecure via config file (#11933).
- Fixed a bug where the podman generate systemd command generated units that depended on multi-user.target, which has been removed from some distributions (#12438).
- Fixed a bug where Podman could not run containers with images that had /etc/ as a symlink (#12189).
- Fixed a bug where the podman logs -f command would, when using the journald logs backend, exit immediately if the container had previously been restarted (#12263).
- Fixed a bug where, in containers on VMs created by podman machine, the host.containers.internal name pointed to the VM, not the host system (#11642).
- Fixed a bug where containers and pods created by the podman play kube command in VMs managed by podman machine would not automatically forward ports from the host machine (#12248).
- Fixed a bug where podman machine init would fail on OS X when GNU Coreutils was installed (#12329).
- Fixed a bug where podman machine start would exit before SSH on the started VM was accepting connections (#11532).
- Fixed a bug where the podman run command with signal proxying (--sig-proxy) enabled could print an error if it attempted to send a signal to a container that had just exited (#8086).
- Fixed a bug where the podman stats command would not return correct information for containers running Systemd as PID1 (#12400).
- Fixed a bug where the podman image save command would fail on OS X when writing the image to STDOUT (#12402).
- Fixed a bug where the podman ps command did not properly handle PS arguments which contained whitespace (#12452).
- Fixed a bug where the podman-remote wait command could fail to detect that the container exited and return an error under some circumstances (#12457).
- Fixed a bug where the Windows MSI installer for podman-remote would break the PATH environment variable by adding an extra ' (#11416).
* API
- The Libpod Play Kube endpoint now also accepts ConfigMap YAML as part of its payload, and will use provided any ConfigMap to configure provided pods and services.
- Fixed a bug where the Compat Create endpoint for Containers would not always create the container's working directory if it did not exist (#11842).
- Fixed a bug where the Compat Create endpoint for Containers returned an incorrect error message with 404 errors when the requested image was not found (#12315).
- Fixed a bug where the Compat Create endpoint for Containers did not properly handle the HostConfig.Mounts field (#12419).
- Fixed a bug where the Compat Archive endpoint for Containers did not properly report errors when the operation failed (#12420).
- Fixed a bug where the Compat Build endpoint for Images ignored the layers query parameter (for caching intermediate layers from the build) (#12378).
- Fixed a bug where the Compat Build endpoint for Images did not report errors in a manner compatible with Docker (#12392).
- Fixed a bug where the Compat Build endpoint for Images would fail to build if the context directory was a symlink (#12409).
- Fixed a bug where the Compat List endpoint for Images included manifest lists (and not just images) in returned results (#12453).
- Update to version 3.4.2:
* Fixed a bug where podman tag could not tag manifest lists (#12046).
* Fixed a bug where built-in volumes specified by images would not be
created correctly under some circumstances.
* Fixed a bug where, when using Podman Machine on OS X, containers in pods
did not have working port forwarding from the host (#12207).
* Fixed a bug where the podman network reload command command on containers
using the slirp4netns network mode and the rootlessport port forwarding
driver would make an unnecessary attempt to restart rootlessport
on containers that did not forward ports.
* Fixed a bug where the podman generate kube command would generate YAML
including some unnecessary (set to default) fields (e.g. empty SELinux and
DNS configuration blocks, and the privileged flag when set to false) (#11995).
* Fixed a bug where the podman pod rm command could, if interrupted at the right moment,
leave a reference to an already-removed infra container behind (#12034).
* Fixed a bug where the podman pod rm command would not remove pods with
more than one container if all containers save for the infra container
were stopped unless --force was specified (#11713).
* Fixed a bug where the --memory flag to podman run and podman create did
not accept a limit of 0 (which should specify unlimited memory) (#12002).
* Fixed a bug where the remote Podman client's podman build command could
attempt to build a Dockerfile in the working directory of the podman
system service instance instead of the Dockerfile specified by the user (#12054).
* Fixed a bug where the podman logs --tail command could function improperly
(printing more output than requested) when the journald log driver was used.
* Fixed a bug where containers run using the slirp4netns network mode with
IPv6 enabled would not have IPv6 connectivity until several seconds after they started (#11062).
* Fixed a bug where some Podman commands could cause an extra dbus-daemon
process to be created (#9727).
* Fixed a bug where rootless Podman would sometimes print warnings
about a failure to move the pause process into a given CGroup (#12065).
* Fixed a bug where the checkpointed field in podman inspect on a container
was not set to false after a container was restored.
* Fixed a bug where the podman system service command would print
overly-verbose logs about request IDs (#12181).
* Fixed a bug where Podman could, when creating a new container without a name
explicitly specified by the user, sometimes use an auto-generated name already
in use by another container if multiple containers were being created in parallel (#11735).
Update to version 3.4.1:
* Bugfixes
- Fixed a bug where podman machine init could, under some circumstances,
create invalid machine configurations which could not be started (#11824).
- Fixed a bug where the podman machine list command would not properly
populate some output fields.
- Fixed a bug where podman machine rm could leave dangling sockets from
the removed machine (#11393).
- Fixed a bug where podman run --pids-limit=-1 was not supported (it now
sets the PID limit in the container to unlimited) (#11782).
- Fixed a bug where podman run and podman attach could throw errors about
a closed network connection when STDIN was closed by the client (#11856).
- Fixed a bug where the podman stop command could fail when run on a
container that had another podman stop command run on it previously.
- Fixed a bug where the --sync flag to podman ps was nonfunctional.
- Fixed a bug where the Windows and OS X remote clients' podman stats
command would fail (#11909).
- Fixed a bug where the podman play kube command did not properly handle
environment variables whose values contained an = (#11891).
- Fixed a bug where the podman generate kube command could generate
invalid annotations when run on containers with volumes that use SELinux
relabelling (:z or :Z) (#11929).
- Fixed a bug where the podman generate kube command would generate YAML
including some unnecessary (set to default) fields (e.g. user and group,
entrypoint, default protocol for forwarded ports) (#11914, #11915, and #11965).
- Fixed a bug where the podman generate kube command could, under some
circumstances, generate YAML including an invalid targetPort field for
forwarded ports (#11930).
- Fixed a bug where rootless Podman's podman info command could, under
some circumstances, not read available CGroup controllers (#11931).
- Fixed a bug where podman container checkpoint --export would fail to
checkpoint any container created with --log-driver=none (#11974).
* API
- Fixed a bug where the Compat Create endpoint for Containers could panic
when no options were passed to a bind mount of tmpfs (#11961).
Update to version 3.4.0:
* Features
- Pods now support init containers! Init containers are containers which run before the rest of the pod starts. There are two types of init containers: 'always', which always run before the pod is started, and 'once', which only run the first time the pod starts and are subsequently removed. They can be added using the podman create command's --init-ctr option.
- Support for init containers has also been added to podman play kube and podman generate kube - init containers contained in Kubernetes YAML will be created as Podman init containers, and YAML generated by Podman will include any init containers created.
- The podman play kube command now supports building images. If the --build option is given and a directory with the name of the specified image exists in the current working directory and contains a valid Containerfile or Dockerfile, the image will be built and used for the container.
- The podman play kube command now supports a new option, --teardown, which removes any pods and containers created by the given Kubernetes YAML.
- The podman generate kube command now generates annotations for SELinux mount options on volume (:z and :Z) that are respected by the podman play kube command.
- A new command has been added, podman pod logs, to return logs for all containers in a pod at the same time.
- Two new commands have been added, podman volume export (to export a volume to a tar file) and podman volume import) (to populate a volume from a given tar file).
- The podman auto-update command now supports simple rollbacks. If a container fails to start after an automatic update, it will be rolled back to the previous image and restarted again.
- Pods now share their user namespace by default, and the podman pod create command now supports the --userns option. This allows rootless pods to be created with the --userns=keep-id option.
- The podman pod ps command now supports a new filter with its --filter option, until, which returns pods created before a given timestamp.
- The podman image scp command has been added. This command allows images to be transferred between different hosts.
- The podman stats command supports a new option, --interval, to specify the amount of time before the information is refreshed.
- The podman inspect command now includes ports exposed (but not published) by containers (e.g. ports from --expose when --publish-all is not specified).
- The podman inspect command now has a new boolean value, Checkpointed, which indicates that a container was stopped as a result of a podman container checkpoint operation.
- Volumes created by podman volume create now support setting quotas when run atop XFS. The size and inode options allow the maximum size and maximum number of inodes consumed by a volume to be limited.
- The podman info command now outputs information on what log drivers, network drivers, and volume plugins are available for use (#11265).
- The podman info command now outputs the current log driver in use, and the variant and codename of the distribution in use.
- The parameters of the VM created by podman machine init (amount of disk space, memory, CPUs) can now be set in containers.conf.
- The podman machine ls command now shows additional information (CPUs, memory, disk size) about VMs managed by podman machine.
- The podman ps command now includes healthcheck status in container state for containers that have healthchecks (#11527).
* Changes
- The podman build command has a new alias, podman buildx, to improve compatibility with Docker. We have already added support for many docker buildx flags to podman build and aim to continue to do so.
- Cases where Podman is run without a user session or a writable temporary files directory will now produce better error messages.
- The default log driver has been changed from file to journald. The file driver did not properly support log rotation, so this should lead to a better experience. If journald is not available on the system, Podman will automatically revert to the file.
- Podman no longer depends on ip for removing networks (#11403).
- The deprecated --macvlan flag to podman network create now warns when it is used. It will be removed entirely in the Podman 4.0 release.
- The podman machine start command now prints a message when the VM is successfully started.
- The podman stats command can now be used on containers that are paused.
- The podman unshare command will now return the exit code of the command that was run in the user namespace (assuming the command was successfully run).
- Successful healthchecks will no longer add a healthy line to the system log to reduce log spam.
- As a temporary workaround for a lack of shortname prompts in the Podman remote client, VMs created by podman machine now default to only using the docker.io registry.
* Bugfixes
- Fixed a bug where whitespace in the definition of sysctls (particularly default sysctls specified in containers.conf) would cause them to be parsed incorrectly.
- Fixed a bug where the Windows remote client improperly validated volume paths (#10900).
- Fixed a bug where the first line of logs from a container run with the journald log driver could be skipped.
- Fixed a bug where images created by podman commit did not include ports exposed by the container.
- Fixed a bug where the podman auto-update command would ignore the io.containers.autoupdate.authfile label when pulling images (#11171).
- Fixed a bug where the --workdir option to podman create and podman run could not be set to a directory where a volume was mounted (#11352).
- Fixed a bug where systemd socket-activation did not properly work with systemd-managed Podman containers (#10443).
- Fixed a bug where environment variable secrets added to a container were not available to exec sessions launched in the container.
- Fixed a bug where rootless containers could fail to start the rootlessport port-forwarding service when XDG_RUNTIME_DIR was set to a long path.
- Fixed a bug where arguments to the --systemd option to podman create and podman run were case-sensitive (#11387).
- Fixed a bug where the podman manifest rm command would also remove images referenced by the manifest, not just the manifest itself (#11344).
- Fixed a bug where the Podman remote client on OS X would not function properly if the TMPDIR environment variable was not set (#11418).
- Fixed a bug where the /etc/hosts file was not guaranteed to contain an entry for localhost (this is still not guaranteed if --net=host is used; such containers will exactly match the host's /etc/hosts) (#11411).
- Fixed a bug where the podman machine start command could print warnings about unsupported CPU features (#11421).
- Fixed a bug where the podman info command could segfault when accessing cgroup information.
- Fixed a bug where the podman logs -f command could hang when a container exited (#11461).
- Fixed a bug where the podman generate systemd command could not be used on containers that specified a restart policy (#11438).
- Fixed a bug where the remote Podman client's podman build command would fail to build containers if the UID and GID on the client were higher than 65536 (#11474).
- Fixed a bug where the remote Podman client's podman build command would fail to build containers if the context directory was a symlink (#11732).
- Fixed a bug where the --network flag to podman play kube was not properly parsed when a non-bridge network configuration was specified.
- Fixed a bug where the podman inspect command could error when the container being inspected was removed as it was being inspected (#11392).
- Fixed a bug where the podman play kube command ignored the default pod infra image specified in containers.conf.
- Fixed a bug where the --format option to podman inspect was nonfunctional under some circumstances (#8785).
- Fixed a bug where the remote Podman client's podman run and podman exec commands could skip a byte of output every 8192 bytes (#11496).
- Fixed a bug where the podman stats command would print nonsensical results if the container restarted while it was running (#11469).
- Fixed a bug where the remote Podman client would error when STDOUT was redirected on a Windows client (#11444).
- Fixed a bug where the podman run command could return 0 when the application in the container exited with 125 (#11540).
- Fixed a bug where containers with --restart=always set using the rootlessport port-forwarding service could not be restarted automatically.
- Fixed a bug where the --cgroups=split option to podman create and podman run was silently discarded if the container was part of a pod.
- Fixed a bug where the podman container runlabel command could fail if the image name given included a tag.
- Fixed a bug where Podman could add an extra 127.0.0.1 entry to /etc/hosts under some circumstances (#11596).
- Fixed a bug where the remote Podman client's podman untag command did not properly handle tags including a digest (#11557).
- Fixed a bug where the --format option to podman ps did not properly support the table argument for tabular output.
- Fixed a bug where the --filter option to podman ps did not properly handle filtering by healthcheck status (#11687).
- Fixed a bug where the podman run and podman start --attach commands could race when retrieving the exit code of a container that had already been removed resulting in an error (e.g. by an external podman rm -f) (#11633).
- Fixed a bug where the podman generate kube command would add default environment variables to generated YAML.
- Fixed a bug where the podman generate kube command would add the default CMD from the image to generated YAML (#11672).
- Fixed a bug where the podman rm --storage command could fail to remove containers under some circumstances (#11207).
- Fixed a bug where the podman machine ssh command could fail when run on Linux (#11731).
- Fixed a bug where the podman stop command would error when used on a container that was already stopped (#11740).
- Fixed a bug where renaming a container in a pod using the podman rename command, then removing the pod using podman pod rm, could cause Podman to believe the new name of the container was permanently in use, despite the container being removed (#11750).
* API
- The Libpod Pull endpoint for Images now has a new query parameter, quiet, which (when set to true) suppresses image pull progress reports (#10612).
- The Compat Events endpoint now includes several deprecated fields from the Docker v1.21 API for improved compatibility with older clients.
- The Compat List and Inspect endpoints for Images now prefix image IDs with sha256: for improved Docker compatibility (#11623).
- The Compat Create endpoint for Containers now properly sets defaults for healthcheck-related fields (#11225).
- The Compat Create endpoint for Containers now supports volume options provided by the Mounts field (#10831).
- The Compat List endpoint for Secrets now supports a new query parameter, filter, which allows returned results to be filtered.
- The Compat Auth endpoint now returns the correct response code (500 instead of 400) when logging into a registry fails.
- The Version endpoint now includes information about the OCI runtime and Conmon in use (#11227).
- Fixed a bug where the X-Registry-Config header was not properly handled, leading to errors when pulling images (#11235).
- Fixed a bug where invalid query parameters could cause a null pointer dereference when creating error messages.
- Logging of API requests and responses at trace level has been greatly improved, including the addition of an X-Reference-Id header to correlate requests and responses (#10053).
Update to version 3.3.1:
* Bugfixes
- Fixed a bug where unit files created by podman generate systemd could
not cleanup shut down containers when stopped by systemctl stop (#11304).
- Fixed a bug where podman machine commands would not properly locate
the gvproxy binary in some circumstances.
- Fixed a bug where containers created as part of a pod using the
--pod-id-file option would not join the pod's network namespace (#11303).
- Fixed a bug where Podman, when using the systemd cgroups driver,
could sometimes leak dbus sessions.
- Fixed a bug where the until filter to podman logs and podman events
was improperly handled, requiring input to be negated (#11158).
- Fixed a bug where rootless containers using CNI networking run on
systems using systemd-resolved for DNS would fail to start if resolved
symlinked /etc/resolv.conf to an absolute path (#11358).
* API
- A large number of potential file descriptor leaks from improperly closing
client connections have been fixed.
Update to version 3.3.0:
* Fix network aliases with network id
* machine: compute sha256 as we read the image file
* machine: check for file exists instead of listing directory
* pkg/bindings/images.nTar(): slashify hdr.Name values
* Volumes: Only remove from DB if plugin removal succeeds
* For compatibility, ignore Content-Type
* [v3.3] Bump c/image 5.15.2, buildah v1.22.3
* Implement SD-NOTIFY proxy in conmon
* Fix rootless cni dns without systemd stub resolver
* fix rootlessport flake
* Skip stats test in CGv1 container environments
* Fix AVC denials in tests of volume mounts
* Restore buildah-bud test requiring new images
* Revert '.cirrus.yml: use fresh images for all VMs'
* Fix device tests using ls test files
* Enhance priv. dev. check
* Workaround host availability of /dev/kvm
* Skip cgroup-parent test due to frequent flakes
* Cirrus: Fix not uploading logformatter html
Switch to crun (bsc#1188914)
Update to version 3.2.3:
* Bump to v3.2.3
* Update release notes for v3.2.3
* vendor containers/common at v0.38.16
* vendor containers/buildah at v1.21.3
* Fix race conditions in rootless cni setup
* CNI-in-slirp4netns: fix bind-mount for /run/systemd/resolve/stub-resolv.conf
* Make rootless-cni setup more robust
* Support uid,gid,mode options for secrets
* vendor containers/common at v0.38.15
* [CI:DOCS] podman search: clarify that results depend on implementation
* vendor containers/common at v0.38.14
* vendor containers/common at v0.38.13
* [3.2] vendor containers/common at v0.38.12
* Bump README to v3.2.2
* Bump to v3.2.3-dev
- Update to version 3.2.2:
* Bump to v3.2.2
* fix systemcontext to use correct TMPDIR
* Scrub podman commands to use report package
* Fix volumes with uid and gid options
* Vendor in c/common v0.38.11
* Initial release notes for v3.2.2
* Fix restoring of privileged containers
* Fix handling of podman-remote build --device
* Add support for podman remote build -f - .
* Fix panic condition in cgroups.getAvailableControllers
* Fix permissions on initially created named volumes
* Fix building static podman-remote
* add correct slirp ip to /etc/hosts
* disable tty-size exec checks in system tests
* Fix resize race with podman exec -it
* Fix documentation of the --format option of podman push
* Fix systemd-resolved detection.
* Health Check is not handled in the compat LibpodToContainerJSON
* Do not use inotify for OCICNI
* getContainerNetworkInfo: lock netNsCtr before sync
* [NO TESTS NEEDED] Create /etc/mtab with the correct ownership
* Create the /etc/mtab file if does not exists
* [v3.2] cp: do not allow dir->file copying
* create: support images with invalid platform
* vendor containers/common at v0.38.10
* logs: k8s-file: restore poll sleep
* logs: k8s-file: fix spurious error logs
* utils: move message from warning to debug
* Bump to v3.2.2-dev
- Update to version 3.2.1:
* Bump to v3.2.1
* Updated release notes for v3.2.1
* Fix network connect race with docker-compose
* Revert 'Ensure minimum API version is set correctly in tests'
* Fall back to string for dockerfile parameter
* remote events: fix --stream=false
* [CI:DOCS] fix incorrect network remove api doc
* remote: always send resize before the container starts
* remote events: support labels
* remote pull: cancel pull when connection is closed
* Fix network prune api docs
* Improve systemd-resolved detection
* logs: k8s-file: fix race
* Fix image prune --filter cmd behavior
* Several shell completion fixes
* podman-remote build should handle -f option properly
* System tests: deal with crun 0.20.1
* Fix build tags for pkg/machine...
* Fix pre-checkpointing
* container: ignore named hierarchies
* [v3.2] vendor containers/common at v0.38.9
* rootless: fix fast join userns path
* [v3.2] vendor containers/common at v0.38.7
* [v3.2] vendor containers/common at v0.38.6
* Correct qemu options for Intel macs
* Ensure minimum API version is set correctly in tests
* Bump to v3.2.1-dev
- Update to version 3.2.0:
* Bump to v3.2.0
* Fix network create macvlan with subnet option
* Final release notes updates for v3.2.0
* add ipv6 nameservers only when the container has ipv6 enabled
* Use request context instead of background
* [v.3.2] events: support disjunctive filters
* System tests: add :Z to volume mounts
* generate systemd: make mounts portable
* vendor containers/storage at v1.31.3
* vendor containers/common at v0.38.5
* Bump to v3.2.0-dev
* Bump to v3.2.0-RC3
* Update release notes for v3.2.0-RC3
* Fix race on podman start --all
* Fix race condition in running ls container in a pod
* docs: --cert-dir: point to containers-certs.d(5)
* Handle hard links in different directories
* Improve OCI Runtime error
* Handle hard links in remote builds
* Podman info add support for status of cgroup controllers
* Drop container does not exist on removal to debugf
* Downgrade API service routing table logging
* add libimage events
* docs: generate systemd: XDG_RUNTIME_DIR
* Fix problem copying files when container is in host pid namespace
* Bump to v3.2.0-dev
* Bump to v3.2.0-RC2
* update c/common
* Update Cirrus DEST_BRANCH to v3.2
* Updated vendors of c/image, c/storage, Buildah
* Initial release notes for v3.2.0-RC2
* Add script for identifying commits in release branches
* Add host.containers.internal entry into container's etc/hosts
* image prune: remove unused images only with `--all`
* podman network reload add rootless support
* Use more recent `stale` release...
* network tutorial: update with rootless cni changes
* [CI:DOCS] Update first line in intro page
* Use updated VM images + updated automation tooling
* auto-update service: prune images
* make vendor
* fix system upgrade tests
* Print 'extracting' only on compressed file
* podman image tree: restore previous behavior
* fix network restart always test
* fix incorrect log driver in podman container image
* Add support for cli network prune --filter flag
* Move filter parsing to common utils
* Bump github.com/containers/storage from 1.30.2 to 1.30.3
* Update nix pin with `make nixpkgs`
* [CI:DOCS] hack/bats - new helper for running system tests
* fix restart always with slirp4netns
* Bump github.com/opencontainers/runc from 1.0.0-rc93 to 1.0.0-rc94
* Bump github.com/coreos/go-systemd/v22 from 22.3.1 to 22.3.2
* Add host.serviceIsRemote to podman info results
* Add client disconnect to build handler loop
* Remove obsolete skips
* Fix podman-remote build --rm=false ...
* fix: improved 'containers/{name}/wait' endpoint
* Bump github.com/containers/storage from 1.30.1 to 1.30.2
* Add envars to the generated systemd unit
* fix: use UTC Time Stamps in response JSON
* fix container startup for empty pidfile
* Kube like pods should share ipc,net,uts by default
* fix: compat API 'images/get' for multiple images
* Revert escaped double dash man page flag syntax
* Report Download complete in Compatibility mode
* Add documentation on short-names
* Bump github.com/docker/docker
* Adds support to preserve auto update labels in generate and play kube
* [CI:DOCS] Stop conversion of `--` into en dash
* Revert Patch to relabel if selinux not enabled
* fix per review request
* Add support for environment variable secrets
* fix pre review request
* Fix infinite loop in isPathOnVolume
* Add containers.conf information for changing defaults
* CI: run rootless tests under ubuntu
* Fix wrong macvlan PNG in networking doc.
* Add restart-policy to container filters & --filter to podman start
* Fixes docker-compose cannot set static ip when use ipam
* channel: simplify implementation
* build: improve regex for iidfile
* Bump github.com/onsi/gomega from 1.11.0 to 1.12.0
* cgroup: fix rootless --cgroup-parent with pods
* fix: docker APIv2 `images/get`
* codespell cleanup
* Minor podmanimage docs updates.
* Fix handling of runlabel IMAGE and NAME
* Bump to v3.2.0-dev
* Bump to v3.2.0-rc1
* rootless: improve automatic range split
* podman: set volatile storage flag for --rm containers
* Bump github.com/onsi/ginkgo from 1.16.1 to 1.16.2
* Bump github.com/containers/image/v5 from 5.11.1 to 5.12.0
* migrate Podman to containers/common/libimage
* Add filepath glob support to --security-opt unmask
* Force log_driver to k8s-file for containers in containers
* add --mac-address to podman play kube
* compat api: Networks must be empty instead of null
* System tests: honor $OCI_RUNTIME (for CI)
* is this a bug?
* system test image: add arm64v8 image
* Fix troubleshooting documentation on handling sublemental groups.
* Add --all to podman start
* Fix variable reference typo. in multi-arch image action
* cgroup: always honor --cgroup-parent with cgroupfs
* Bump github.com/uber/jaeger-client-go
* Don't require tests for github-actions & metadata
* Detect if in podman machine virtual vm
* Fix multi-arch image workflow typo
* [CI:DOCS] Add titles to remote docs (windows)
* Remove unused VolumeList* structs
* Cirrus: Update F34beta -> F34
* Update container image docs + fix unstable execution
* Bump github.com/containers/storage from 1.30.0 to 1.30.1
* TODO complete
* Docker returns 'die' status rather then 'died' status
* Check if another VM is running on machine start
* [CI:DOCS] Improve titles of command HTML pages
* system tests: networking: fix another race condition
* Use seccomp_profile as default profile if defined in containers.conf
* Bump github.com/json-iterator/go from 1.1.10 to 1.1.11
* Vendored
* Autoupdate local label functional
* System tests: fix two race conditions
* Add more documentation on conmon
* Allow docker volume create API to pass without name
* Cirrus: Update Ubuntu images to 21.04
* Skip blkio-weight test when no kernel BFQ support
* rootless: Tell the user what was led to the error, not just what it is
* Add troubleshooting advice about the --userns option.
* Fix images prune filter until
* Fix logic for pushing stable multi-arch images
* Fixes generate kube incorrect when bind-mounting '/' and '/root'
* libpod/image: unit tests: don't use system's registries.conf.d
* runtime: create userns when CAP_SYS_ADMIN is not present
* rootless: attempt to copy current mappings first
* [CI:DOCS] Restore missing content to manpages
* [CI:DOCS] Fix Markdown layout bugs
* Fix podman ps --filter ancestor to match exact ImageName/ImageID
* Add machine-enabled to containers.conf for machine
* Several multi-arch image build/push fixes
* Add podman run --timeout option
* Parse slirp4netns net options with compat api
* Fix rootlesskit port forwarder with custom slirp cidr
* Fix removal race condition in ListContainers
* Add github-action workflow to build/push multi-arch
* rootless: if root is not sub?id raise a debug message
* Bump github.com/containers/common from 0.36.0 to 0.37.0
* Add go template shell completion for --format
* Add --group-add keep-groups: suplimentary groups into container
* Fixes from make codespell
* Typo fix to usage text of --compress option
* corrupt-image test: fix an oops
* Add --noheading flag to all list commands
* Bump github.com/containers/storage from 1.29.0 to 1.30.0
* Bump github.com/containers/image/v5 from 5.11.0 to 5.11.1
* [CI:DOCS] Fix Markdown table layout bugs
* podman-remote should show podman.sock info
* rmi: don't break when the image is missing a manifest
* [CI:DOCS] Rewrite --uidmap doc in podman-create.1.md and podman-run.1.md
* Add support for CDI device configuration
* [CI:DOCS] Add missing dash to verbose option
* Bump github.com/uber/jaeger-client-go
* Remove an advanced layer diff function
* Ensure mount destination is clean, no trailing slash
* add it for inspect pidfile
* [CI:DOCS] Fix introduction page typo
* support pidfile on container restore
* fix start it
* skip pidfile test on remote
* improve document
* set pidfile default value int containerconfig
* add pidfile in inspection
* add pidfile it for container start
* skip pidfile it on remote
* Modify according to comments
* WIP: drop test requirement
* runtime: bump required conmon version
* runtime: return findConmon to libpod
* oci: drop ExecContainerCleanup
* oci: use `--full-path` option for conmon
* use AttachSocketPath when removing conmon files
* hide conmon-pidfile flag on remote mode
* Fix possible panic in libpod/image/prune.go
* add --ip to podman play kube
* add flag autocomplete
* add ut
* add flag '--pidfile' for podman create/run
* Add network bindings tests: remove and list
* Fix build with GO111MODULE=off
* system tests: build --pull-never: deal with flakes
* compose test: diagnose flakes v3
* podman play kube apply correct log driver
* Fixes podman-remote save to directories does not work
* Bump github.com/rootless-containers/rootlesskit from 0.14.1 to 0.14.2
* Update documentation of podman-run to reflect volume 'U' option
* Fix flake on failed podman-remote build : try 2
* compose test: ongoing efforts to diagnose flakes
* Test that we don't error out on advertised --log-level values
* At trace log level, print error text using %+v instead of %v
* pkg/errorhandling.JoinErrors: don't throw away context for lone errors
* Recognize --log-level=trace
* Fix flake on failed podman-remote build
* System tests: fix racy podman-inspect
* Fixes invalid expression in save command
* Bump github.com/containers/common from 0.35.4 to 0.36.0
* Update nix pin with `make nixpkgs`
* compose test: try to get useful data from flakes
* Remove in-memory state implementation
* Fix message about runtime to show only the actual runtime
* System tests: setup: better cleanup of stray images
* Bump github.com/containers/ocicrypt from 1.1.0 to 1.1.1
* Reflect current state of prune implementation in docs
* Do not delete container twice
* [CI:DOCS] Correct status code for /pods/create
* vendor in containers/storage v1.29.0
* cgroup: do not set cgroup parent when rootless and cgroupfs
* Overhaul Makefile binary and release worflows
* Reorganize Makefile with sections and guide
* Simplify Makefile help target
* Don't shell to obtain current directory
* Remove unnecessary/not-needed release.txt target
* Fix incorrect version number output
* Exclude .gitignore from test req.
* Fix handling of $NAME and $IMAGE in runlabel
* Update podman image Dockerfile to support Podman in container
* Bump github.com/containers/image/v5 from 5.10.5 to 5.11.0
* Fix slashes in socket URLs
* Add network prune filters support to bindings
* Add support for play/generate kube volumes
* Update manifest API endpoints
* Fix panic when not giving a machine name for ssh
* cgroups: force 64 bits to ParseUint
* Bump k8s.io/api from 0.20.5 to 0.21.0
* [CI:DOCS] Fix formatting of podman-build man page
* buildah-bud tests: simplify
* Add missing return
* Bump github.com/onsi/ginkgo from 1.16.0 to 1.16.1
* speed up CI handling of images
* Volumes prune endpoint should use only prune filters
* Cirrus: Use Fedora 34beta images
* Bump go.sum + Makefile for golang 1.16
* Exempt Makefile changes from test requirements
* Adjust libpod API Container Wait documentation to the code
* [CI:DOCS] Update swagger definition of inspect manifest
* use updated ubuntu images
* podman unshare: add --rootless-cni to join the ns
* Update swagger-check
* swagger: remove name wildcards
* Update buildah-bud diffs
* Handle podman-remote --arch, --platform, --os
* buildah-bud tests: handle go pseudoversions, plus...
* Fix flaking rootless compose test
* rootless cni add /usr/sbin to PATH if not present
* System tests: special case for RHEL: require runc
* Add --requires flag to podman run/create
* [CI:DOCS] swagger-check: compare operations
* [CI:DOCS] Polish swagger OpertionIDs
* [NO TESTS NEEDED] Update nix pin with `make nixpkgs`
* Ensure that `--userns=keep-id` sets user in config
* [CI:DOCS] Set all operation id to be compatibile
* Move operationIds to swagger:operation line
* swagger: add operationIds that match with docker
* Cirrus: Make use of shared get_ci_vm container
* Don't relabel volumes if running in a privileged container
* Allow users to override default storage opts with --storage-opt
* Add support for podman --context default
* Verify existence of auth file if specified
* fix machine naming conventions
* Initial network bindings tests
* Update release notes to indicate CVE fix
* Move socket activation check into init() and set global condition.
* Bump github.com/onsi/ginkgo from 1.15.2 to 1.16.0
* Http api tests for network prune with until filter
* podman-run.1.md, podman-create.1.md : Adjust Markdown layout for --userns
* Fix typos --uidmapping and --gidmapping
* Add transport and destination info to manifest doc
* Bump github.com/rootless-containers/rootlesskit from 0.14.0 to 0.14.1
* Add default template functions
* Fix missing podman-remote build options
* Bump github.com/coreos/go-systemd/v22 from 22.3.0 to 22.3.1
* Add ssh connection to root user
* Add rootless docker-compose test to the CI
* Use the slrip4netns dns in the rootless cni ns
* Cleanup the rootless cni namespace
* Add new docker-compose test for two networks
* Make the docker-compose test work rootless
* Remove unused rootless-cni-infra container files
* Only use rootless RLK when the container has ports
* Fix dnsname test
* Enable rootless network connect/disconnect
* Move slirp4netns functions into an extra file
* Fix pod infra container cni network setup
* Add rootless support for cni and --uidmap
* rootless cni without infra container
* Recreate until container prune tests for bindings
* Remove --execute from podman machine ssh
* Fixed podman-remote --network flag
* Makefile: introduce install.docker-full
* Makefile: ensure install.docker creates BINDIR
* Fix unmount doc reference in image.rst
* Should send the OCI runtime path not just the name to buildah
* podman machine shell completion
* Fix handling of remove --log-rusage param
* Fix bindings prune containers flaky test
* [CI:DOCS] Add local html build info to docs/README.md
* Add podman machine list
* Trim white space from /top endpoint results
* Remove semantic version suffices from API calls
* podman machine init --ignition-path
* Document --volume from podman-remote run/create client
* Update main branch to reflect the release of v3.1.0
* Silence podman network reload errors with iptables-nft
* Containers prune endpoint should use only prune filters
* resolve proper aarch64 image names
* APIv2 basic test: relax APIVersion check
* Add machine support for qemu-system-aarch64
* podman machine init user input
* manpage xref: helpful diagnostic for unescaped dash-dash
* Bump to v3.2.0-dev
* swagger: update system version response body
* buildah-bud tests: reenable pull-never test
* [NO TESTS NEEDED] Shrink the size of podman-remote
* Add powershell completions
* [NO TESTS NEEDED] Drop Warning to Info, if cgroups not mounted
* Fix long option format on docs.podman.io
* system tests: friendier messages for 2-arg is()
* service: use LISTEN_FDS
* man pages: correct seccomp-policy label
* rootless: use is_fd_inherited
* podman generate systemd --new do not duplicate params
* play kube: add support for env vars defined from secrets
* play kube: support optional/mandatory env var from config map
* play kube: prepare supporting other env source than config maps
* Add machine support for more Linux distros
* [NO TESTS NEEDED] Use same function podman-remote rmi as podman
* Podman machine enhancements
* Add problematic volume name to kube play error messages
* Fix podman build --pull-never
* [NO TESTS NEEDED] Fix for kernel without CONFIG_USER_NS
* [NO TESTS NEEDED] Turn on podman-remote build --isolation
* Fix list pods filter handling in libpod api
* Remove resize race condition
* [NO TESTS NEEDED] Vendor in containers/buildah v1.20.0
* Use TMPDIR when commiting images
* Add RequiresMountsFor= to systemd generate
* Bump github.com/vbauerster/mpb/v6 from 6.0.2 to 6.0.3
* Fix swapped dimensions from terminal.GetSize
* Rename podman machine create to init and clean up
* Correct json field name
* system tests: new interactive tests
* Improvements for machine
* libpod/image: unit tests: use a `registries.conf` for aliases
* libpod/image: unit tests: defer cleanup
* libpod/image: unit tests: use `require.NoError`
* Add --execute flag to podman machine ssh
* introduce podman machine
* Podman machine CLI and interface stub
* Support multi doc yaml for generate/play kube
* Fix filters in image http compat/libpod api endpoints
* Bump github.com/containers/common from 0.35.3 to 0.35.4
* Bump github.com/containers/storage from 1.28.0 to 1.28.1
* Check if stdin is a term in --interactive --tty mode
* [NO TESTS NEEDED] Remove /tmp/containers-users-* files on reboot
* [NO TESTS NEEDED] Fix rootless volume plugins
* Ensure manually-created volumes have correct ownership
* Bump github.com/rootless-containers/rootlesskit
* Unification of until filter across list/prune endpoints
* Unification of label filter across list/prune endpoints
* fixup
* fix: build endpoint for compat API
* [CI:DOCS] Add note to mappings for user/group userns in build
* Bump k8s.io/api from 0.20.1 to 0.20.5
* Validate passed in timezone from tz option
* WIP: run buildah bud tests using podman
* Fix containers list/prune http api filter behaviour
* Generate Kubernetes PersistentVolumeClaims from named volumes
- Update to version 3.1.2:
* Bump to v3.1.2
* Update release notes for v3.1.2
* Ensure mount destination is clean, no trailing slash
* Fixes podman-remote save to directories does not work
* [CI:DOCS] Add missing dash to verbose option
* [CI:DOCS] Fix Markdown table layout bugs
* [CI:DOCS] Rewrite --uidmap doc in podman-create.1.md and podman-run.1.md
* rmi: don't break when the image is missing a manifest
* Bump containers/image to v5.11.1
* Bump github.com/coreos/go-systemd from 22.2.0 to 22.3.1
* Fix lint
* Bump to v3.1.2-dev
- Split podman-remote into a subpackage
- Add missing scriptlets for systemd units
- Escape macros in comments
- Drop some obsolete workarounds, including %{go_nostrip}
- Update to version 3.1.1:
* Bump to v3.1.1
* Update release notes for v3.1.1
* podman play kube apply correct log driver
* Fix build with GO111MODULE=off
* [CI:DOCS] Set all operation id to be compatibile
* Move operationIds to swagger:operation line
* swagger: add operationIds that match with docker
* Fix missing podman-remote build options
* [NO TESTS NEEDED] Shrink the size of podman-remote
* Move socket activation check into init() and set global condition.
* rootless: use is_fd_inherited
* Recreate until container prune tests for bindings
* System tests: special case for RHEL: require runc
* Document --volume from podman-remote run/create client
* Containers prune endpoint should use only prune filters
* Trim white space from /top endpoint results
* Fix unmount doc reference in image.rst
* Fix handling of remove --log-rusage param
* Makefile: introduce install.docker-full
* Makefile: ensure install.docker creates BINDIR
* Should send the OCI runtime path not just the name to buildah
* Fixed podman-remote --network flag
* podman-run.1.md, podman-create.1.md : Adjust Markdown layout for --userns
* Fix typos --uidmapping and --gidmapping
* Add default template functions
* Don't relabel volumes if running in a privileged container
* Allow users to override default storage opts with --storage-opt
* Add transport and destination info to manifest doc
* Verify existence of auth file if specified
* Ensure that `--userns=keep-id` sets user in config
* [CI:DOCS] Update swagger definition of inspect manifest
* Volumes prune endpoint should use only prune filters
* Adjust libpod API Container Wait documentation to the code
* Add missing return
* [CI:DOCS] Fix formatting of podman-build man page
* cgroups: force 64 bits to ParseUint
* Fix slashes in socket URLs
* [CI:DOCS] Correct status code for /pods/create
* cgroup: do not set cgroup parent when rootless and cgroupfs
* Reflect current state of prune implementation in docs
* Do not delete container twice
* Test that we don't error out on advertised --log-level values
* At trace log level, print error text using %+v instead of %v
* pkg/errorhandling.JoinErrors: don't throw away context for lone errors
* Recognize --log-level=trace
* Fix message about runtime to show only the actual runtime
* Fix handling of $NAME and $IMAGE in runlabel
* Fix flake on failed podman-remote build : try 2
* Fix flake on failed podman-remote build
* Update documentation of podman-run to reflect volume 'U' option
* Fixes invalid expression in save command
* Fix possible panic in libpod/image/prune.go
* Update all containers/ project vendors
* Fix tests
* Bump to v3.1.1-dev
- Update to version 3.1.0:
* Bump to v3.1.0
* Fix test failure
* Update release notes for v3.1.0 final release
* [NO TESTS NEEDED] Turn on podman-remote build --isolation
* Fix long option format on docs.podman.io
* Fix containers list/prune http api filter behaviour
* [CI:DOCS] Add note to mappings for user/group userns in build
* Validate passed in timezone from tz option
* Generate Kubernetes PersistentVolumeClaims from named volumes
* libpod/image: unit tests: use a `registries.conf` for aliases
- Require systemd 241 or newer due to podman dependency go-systemd v22,
otherwise build will fail with unknown C name errors
- Create docker subpackage to allow replacing docker with
corresponding aliases to podman.
- Update to v3.0.1
* Changes
- Several frequently-occurring WARN level log messages have been downgraded to INFO or DEBUG to not clutter terminal output.
Bugfixes
- Fixed a bug where the Created field of podman ps --format=json was formatted as a string instead of an Unix timestamp (integer) (#9315).
- Fixed a bug where failing lookups of individual layers during the podman images command would cause the whole command to fail without printing output.
- Fixed a bug where --cgroups=split did not function properly on cgroups v1 systems.
- Fixed a bug where mounting a volume over an directory in the container that existed, but was empty, could fail (#9393).
- Fixed a bug where mounting a volume over a directory in the container that existed could copy the entirety of the container's rootfs, instead of just the directory mounted over, into the volume (#9415).
- Fixed a bug where Podman would treat the --entrypoint=[''] option to podman run and podman create as a literal empty string in the entrypoint, when instead it should have been ignored (#9377).
- Fixed a bug where Podman would set the HOME environment variable to '' when the container ran as a user without an assigned home directory (#9378).
- Fixed a bug where specifying a pod infra image that had no tags (by using its ID) would cause podman pod create to panic (#9374).
- Fixed a bug where the --runtime option was not properly handled by the podman build command (#9365).
- Fixed a bug where Podman would incorrectly print an error message related to the remote API when the remote API was not in use and starting Podman failed.
- Fixed a bug where Podman would change ownership of a container's working directory, even if it already existed (#9387).
- Fixed a bug where the podman generate systemd --new command would incorrectly escape %t when generating the path for the PID file (#9373).
- Fixed a bug where Podman could, when run inside a Podman container with the host's containers/storage directory mounted into the container, erroneously detect a reboot and reset container state if the temporary directory was not also mounted in (#9191).
- Fixed a bug where some options of the podman build command (including but not limited to --jobs) were nonfunctional (#9247).
* API
- Fixed a breaking change to the Libpod Wait API for Containers where the Conditions parameter changed type in Podman v3.0 (#9351).
- Fixed a bug where the Compat Create endpoint for Containers did not properly handle forwarded ports that did not specify a host port.
- Fixed a bug where the Libpod Wait endpoint for Containers could write duplicate headers after an error occurred.
- Fixed a bug where the Compat Create endpoint for Images would not pull images that already had a matching tag present locally, even if a more recent version was available at the registry (#9232).
- The Compat Create endpoint for Images has had its compatibility with Docker improved, allowing its use with the docker-java library.
* Misc
- Updated Buildah to v1.19.4
- Updated the containers/storage library to v1.24.6
- Changes from v3.0.0
* Features
- Podman now features initial support for Docker Compose.
- Added the podman rename command, which allows containers to be renamed after they are created (#1925).
- The Podman remote client now supports the podman copy command.
- A new command, podman network reload, has been added. This command will re-configure the network of all running containers, and can be used to recreate firewall rules lost when the system firewall was reloaded (e.g. via firewall-cmd --reload).
- Podman networks now have IDs. They can be seen in podman network ls and can be used when removing and inspecting networks. Existing networks receive IDs automatically.
- Podman networks now also support labels. They can be added via the --label option to network create, and podman network ls can filter labels based on them.
- The podman network create command now supports setting bridge MTU and VLAN through the --opt option (#8454).
- The podman container checkpoint and podman container restore commands can now checkpoint and restore containers that include volumes.
- The podman container checkpoint command now supports the --with-previous and --pre-checkpoint options, and the podman container restore command now support the --import-previous option. These add support for two-step checkpointing with lowered dump times.
- The podman push command can now push manifest lists. Podman will first attempt to push as an image, then fall back to pushing as a manifest list if that fails.
- The podman generate kube command can now be run on multiple containers at once, and will generate a single pod containing all of them.
- The podman generate kube and podman play kube commands now support Kubernetes DNS configuration, and will preserve custom DNS configuration when exporting or importing YAML (#9132).
- The podman generate kube command now properly supports generating YAML for containers and pods creating using host networking (--net=host) (#9077).
- The podman kill command now supports a --cidfile option to kill containers given a file containing the container's ID (#8443).
- The podman pod create command now supports the --net=none option (#9165).
- The podman volume create command can now specify volume UID and GID as options with the UID and GID fields passed to the the --opt option.
- Initial support has been added for Docker Volume Plugins. Podman can now define available plugins in containers.conf and use them to create volumes with podman volume create --driver.
- The podman run and podman create commands now support a new option, --platform, to specify the platform of the image to be used when creating the container.
- The --security-opt option to podman run and podman create now supports the systempaths=unconfined option to unrestrict access to all paths in the container, as well as mask and unmask options to allow more granular restriction of container paths.
- The podman stats --format command now supports a new format specified, MemUsageBytes, which prints the raw bytes of memory consumed by a container without human-readable formatting #8945.
- The podman ps command can now filter containers based on what pod they are joined to via the pod filter (#8512).
- The podman pod ps command can now filter pods based on what networks they are joined to via the network filter.
The podman pod ps command can now print information on what networks a pod is joined to via the .Networks specifier to the --format option.
- The podman system prune command now supports filtering what containers, pods, images, and volumes will be pruned.
- The podman volume prune commands now supports filtering what volumes will be pruned.
- The podman system prune command now includes information on space reclaimed (#8658).
- The podman info command will now properly print information about packages in use on Gentoo and Arch systems.
- The containers.conf file now contains an option for disabling creation of a new kernel keyring on container creation (#8384).
- The podman image sign command can now sign multi-arch images by producing a signature for each image in a given manifest list.
- The podman image sign command, when run as rootless, now supports per-user registry configuration files in $HOME/.config/containers/registries.d.
- Configuration options for slirp4netns can now be set system-wide via the NetworkCmdOptions configuration option in containers.conf.
- The MTU of slirp4netns can now be configured via the mtu= network command option (e.g. podman run --net slirp4netns:mtu=9000).
* Security
- A fix for CVE-2021-20199 is included. Podman between v1.8.0 and v2.2.1 used 127.0.0.1 as the source address for all traffic forwarded into rootless containers by a forwarded port; this has been changed to address the issue.
* Changes
- Shortname aliasing support has now been turned on by default. All Podman commands that must pull an image will, if a TTY is available, prompt the user about what image to pull.
- The podman load command no longer accepts a NAME[:TAG] argument. The presence of this argument broke CLI compatibility with Docker by making docker load commands unusable with Podman (#7387).
- The Go bindings for the HTTP API have been rewritten with a focus on limiting dependency footprint and improving extensibility. Read more here.
- The legacy Varlink API has been completely removed from Podman.
- The default log level for Podman has been changed from Error to Warn.
- The podman network create command can now create macvlan networks using the --driver macvlan option for Docker compatibility. The existing --macvlan flag has been deprecated and will be removed in Podman 4.0 some time next year.
- The podman inspect command has had the LogPath and LogTag fields moved into the LogConfig structure (from the root of the Inspect structure). The maximum size of the log file is also included.
- The podman generate systemd command no longer generates unit files using the deprecated KillMode=none option (#8615).
- The podman stop command now releases the container lock while waiting for it to stop - as such, commands like podman ps will no longer block until podman stop completes (#8501).
- Networks created with podman network create --internal no longer use the dnsname plugin. This configuration never functioned as expected.
- Error messages for the remote Podman client have been improved when it cannot connect to a Podman service.
- Error messages for podman run when an invalid SELinux is specified have been improved.
- Rootless Podman features improved support for containers with a single user mapped into the rootless user namespace.
- Pod infra containers now respect default sysctls specified in containers.conf allowing for advanced configuration of the namespaces they will share.
- SSH public key handling for remote Podman has been improved.
* Bugfixes
- Fixed a bug where the podman history --no-trunc command would truncate the Created By field (#9120).
- Fixed a bug where root containers that did not explicitly specify a CNI network to join did not generate an entry for the network in use in the Networks field of the output of podman inspect (#6618).
- Fixed a bug where, under some circumstances, container working directories specified by the image (via the WORKDIR instruction) but not present in the image, would not be created (#9040).
- Fixed a bug where the podman generate systemd command would generate invalid unit files if the container was creating using a command line that included doubled braces ({{ and }}), e.g. --log-opt-tag={{.Name}} (#9034).
- Fixed a bug where the podman generate systemd --new command could generate unit files including invalid Podman commands if the container was created using merged short options (e.g. podman run -dt) (#8847).
- Fixed a bug where the podman generate systemd --new command could generate unit files that did not handle Podman commands including some special characters (e.g. $) (#9176
- Fixed a bug where rootless containers joining CNI networks could not set a static IP address (#7842).
- Fixed a bug where rootless containers joining CNI networks could not set network aliases (#8567).
- Fixed a bug where the remote client could, under some circumstances, not include the Containerfile when sending build context to the server (#8374).
- Fixed a bug where rootless Podman did not mount /sys as a new sysfs in some circumstances where it was acceptable.
- Fixed a bug where rootless containers that both joined a user namespace and a CNI networks would cause a segfault. These options are incompatible and now return an error.
- Fixed a bug where the podman play kube command did not properly handle CMD and ARGS from images (#8803).
- Fixed a bug where the podman play kube command did not properly handle environment variables from images (#8608).
- Fixed a bug where the podman play kube command did not properly print errors that occurred when starting containers.
- Fixed a bug where the podman play kube command errored when hostNetwork was used (#8790).
- Fixed a bug where the podman play kube command would always pull images when the :latest tag was specified, even if the image was available locally (#7838).
- Fixed a bug where the podman play kube command did not properly handle SELinux configuration, rending YAML with custom SELinux configuration unusable (#8710).
- Fixed a bug where the podman generate kube command incorrectly populated the args and command fields of generated YAML (#9211).
- Fixed a bug where containers in a pod would create a duplicate entry in the pod's shared /etc/hosts file every time the container restarted (#8921).
- Fixed a bug where the podman search --list-tags command did not support the --format option (#8740).
- Fixed a bug where the http_proxy option in containers.conf was not being respected, and instead was set unconditionally to true (#8843).
- Fixed a bug where rootless Podman could, on systems with a recent Conmon and users with a long username, fail to attach to containers (#8798).
- Fixed a bug where the podman images command would break and fail to display any images if an empty manifest list was present in storage (#8931).
- Fixed a bug where locale environment variables were not properly passed on to Conmon.
- Fixed a bug where Podman would not build on the MIPS architecture (#8782).
- Fixed a bug where rootless Podman could fail to properly configure user namespaces for rootless containers when the user specified a --uidmap option that included a mapping beginning with UID 0.
- Fixed a bug where the podman logs command using the k8s-file backend did not properly handle partial log lines with a length of 1 (#8879).
- Fixed a bug where the podman logs command with the --follow option did not properly handle log rotation (#8733).
- Fixed a bug where user-specified HOSTNAME environment variables were overwritten by Podman (#8886).
- Fixed a bug where Podman would applied default sysctls from containers.conf in too many situations (e.g. applying network sysctls when the container shared its network with a pod).
- Fixed a bug where Podman did not properly handle cases where a secondary image store was in use and an image was present in both the secondary and primary stores (#8176).
- Fixed a bug where systemd-managed rootless Podman containers where the user in the container was not root could fail as the container's PID file was not accessible to systemd on the host (#8506).
- Fixed a bug where the --privileged option to podman run and podman create would, under some circumstances, not disable Seccomp (#8849).
- Fixed a bug where the podman exec command did not properly add capabilities when the container or exec session were run with --privileged.
- Fixed a bug where rootless Podman would use the --enable-sandbox option to slirp4netns unconditionally, even when pivot_root was disabled, rendering slirp4netns unusable when pivot_root was disabled (#8846).
- Fixed a bug where podman build --logfile did not actually write the build's log to the logfile.
- Fixed a bug where the podman system service command did not close STDIN, and could display user-interactive prompts (#8700).
- Fixed a bug where the podman system reset command could, under some circumstances, remove all the contents of the XDG_RUNTIME_DIR directory (#8680).
- Fixed a bug where the podman network create command created CNI configurations that did not include a default gateway (#8748).
- Fixed a bug where the podman.service systemd unit provided by default used the wrong service type, and would cause systemd to not correctly register the service as started (#8751).
- Fixed a bug where, if the TMPDIR environment variable was set for the container engine in containers.conf, it was being ignored.
- Fixed a bug where the podman events command did not properly handle future times given to the --until option (#8694).
- Fixed a bug where the podman logs command wrote container STDERR logs to STDOUT instead of STDERR (#8683).
- Fixed a bug where containers created from an image with multiple tags would report that they were created from the wrong tag (#8547).
- Fixed a bug where container capabilities were not set properly when the --cap-add=all and --user options to podman create and podman run were combined.
- Fixed a bug where the --layers option to podman build was nonfunctional (#8643).
- Fixed a bug where the podman system prune command did not act recursively, and thus would leave images, containers, pods, and volumes present that would be removed by a subsequent call to podman system prune (#7990).
- Fixed a bug where the --publish option to podman run and podman create did not properly handle ports specified as a range of ports with no host port specified (#8650).
- Fixed a bug where --format did not support JSON output for individual fields (#8444).
- Fixed a bug where the podman stats command would fail when run on root containers using the slirp4netns network mode (#7883).
- Fixed a bug where the Podman remote client would ask for a password even if the server's SSH daemon did not support password authentication (#8498).
- Fixed a bug where the podman stats command would fail if the system did not support one or more of the cgroup controllers Podman supports (#8588).
- Fixed a bug where the --mount option to podman create and podman run did not ignore the consistency mount option.
- Fixed a bug where failures during the resizing of a container's TTY would print the wrong error.
- Fixed a bug where the podman network disconnect command could cause the podman inspect command to fail for a container until it was restarted (#9234).
- Fixed a bug where containers created from a read-only rootfs (using the --rootfs option to podman create and podman run) would fail (#9230).
- Fixed a bug where specifying Go templates to the --format option to multiple Podman commands did not support the join function (#8773).
- Fixed a bug where the podman rmi command could, when run in parallel on multiple images, return layer not known errors (#6510).
- Fixed a bug where the podman inspect command on containers displayed unlimited ulimits incorrectly (#9303).
- Fixed a bug where Podman would fail to start when a volume was mounted over a directory in a container that contained symlinks that terminated outside the directory and its subdirectories (#6003).
API
- Libpod API version has been bumped to v3.0.0.
- All Libpod Pod APIs have been modified to properly report errors with individual containers. Cases where the operation as a whole succeeded but individual containers failed now report an HTTP 409 error (#8865).
- The Compat API for Containers now supports the Rename and Copy APIs.
- Fixed a bug where the Compat Prune APIs (for volumes, containers, and images) did not return the amount of space reclaimed in their responses.
- Fixed a bug where the Compat and Libpod Exec APIs for Containers would drop errors that occurred prior to the exec session successfully starting (e.g. a 'no such file' error if an invalid executable was passed) (#8281)
- Fixed a bug where the Volumes field in the Compat Create API for Containers was being ignored (#8649).
- Fixed a bug where the NetworkMode field in the Compat Create API for Containers was not handling some values, e.g. container:, correctly.
- Fixed a bug where the Compat Create API for Containers did not set container name properly.
- Fixed a bug where containers created using the Compat Create API unconditionally used Kubernetes file logging (the default specified in containers.conf is now used).
- Fixed a bug where the Compat Inspect API for Containers could include container states not recognized by Docker.
- Fixed a bug where Podman did not properly clean up after calls to the Events API when the journald backend was in use, resulting in a leak of file descriptors (#8864).
- Fixed a bug where the Libpod Pull endpoint for Images could fail with an index out of range error under certain circumstances (#8870).
- Fixed a bug where the Libpod Exists endpoint for Images could panic.
- Fixed a bug where the Compat List API for Containers did not support all filters (#8860).
- Fixed a bug where the Compat List API for Containers did not properly populate the Status field.
- Fixed a bug where the Compat and Libpod Resize APIs for Containers ignored the height and width parameters (#7102).
- Fixed a bug where the Compat Search API for Images returned an incorrectly-formatted JSON response (#8758).
- Fixed a bug where the Compat Load API for Images did not properly clean up temporary files.
- Fixed a bug where the Compat Create API for Networks could panic when an empty IPAM configuration was specified.
- Fixed a bug where the Compat Inspect and List APIs for Networks did not include Scope.
- Fixed a bug where the Compat Wait endpoint for Containers did not support the same wait conditions that Docker did.
* Misc
- Updated Buildah to v1.19.2
- Updated the containers/storage library to v1.24.5
- Updated the containers/image library to v5.10.2
- Updated the containers/common library to v0.33.4
- Update to v2.2.1
* Changes
- Due to a conflict with a previously-removed field, we were forced to
modify the way image volumes (mounting images into containers using
--mount type=image) were handled in the database.
As a result, containers created in Podman 2.2.0 with image volume
will not have them in v2.2.1, and these containers will need to be re-created.
* Bugfixes
- Fixed a bug where rootless Podman would, on systems without the
XDG_RUNTIME_DIR environment variable defined, use an incorrect path
for the PID file of the Podman pause process, causing Podman to fail
to start (#8539).
- Fixed a bug where containers created using Podman v1.7 and earlier were
unusable in Podman due to JSON decode errors (#8613).
- Fixed a bug where Podman could retrieve invalid cgroup paths, instead
of erroring, for containers that were not running.
- Fixed a bug where the podman system reset command would print a warning
about a duplicate shutdown handler being registered.
- Fixed a bug where rootless Podman would attempt to mount sysfs in
circumstances where it was not allowed; some OCI runtimes (notably
crun) would fall back to alternatives and not fail, but others
(notably runc) would fail to run containers.
- Fixed a bug where the podman run and podman create commands would fail
to create containers from untagged images (#8558).
- Fixed a bug where remote Podman would prompt for a password even when
the server did not support password authentication (#8498).
- Fixed a bug where the podman exec command did not move the Conmon
process for the exec session into the correct cgroup.
- Fixed a bug where shell completion for the ancestor option to
podman ps --filter did not work correctly.
- Fixed a bug where detached containers would not properly clean themselves
up (or remove themselves if --rm was set) if the Podman command that
created them was invoked with --log-level=debug.
* API
- Fixed a bug where the Compat Create endpoint for Containers did not
properly handle the Binds and Mounts parameters in HostConfig.
- Fixed a bug where the Compat Create endpoint for Containers
ignored the Name query parameter.
- Fixed a bug where the Compat Create endpoint for Containers did not
properly handle the 'default' value for NetworkMode (this value is
used extensively by docker-compose) (#8544).
- Fixed a bug where the Compat Build endpoint for Images would sometimes
incorrectly use the target query parameter as the image's tag.
* Misc
- Podman v2.2.0 vendored a non-released, custom version of the
github.com/spf13/cobra package; this has been reverted to the latest
upstream release to aid in packaging.
- Updated the containers/image library to v5.9.0
- Update to v2.2.0
* Features
- Experimental support for shortname aliasing has been added. This is not enabled by default, but can be turned on by setting the environment variable CONTAINERS_SHORT_NAME_ALIASING to on. Documentation is available here and here.
- Initial support has been added for the podman network connect and podman network disconnect commands, which allow existing containers to modify what networks they are connected to. At present, these commands can only be used on running containers that did not specify --network=none when they were created.
- The podman run command now supports the --network-alias option to set network aliases (additional names the container can be accessed at from other containers via DNS if the dnsname CNI plugin is in use). Aliases can also be added and removed using the new podman network connect and podman network disconnect commands. Please note that this requires a new release (v1.1.0) of the dnsname plugin, and will only work on newly-created CNI networks.
- The podman generate kube command now features support for exporting container's memory and CPU limits (#7855).
- The podman play kube command now features support for setting CPU and Memory limits for containers (#7742).
- The podman play kube command now supports persistent volumes claims using Podman named volumes.
- The podman play kube command now supports Kubernetes configmaps via the --configmap option (#7567).
- The podman play kube command now supports a --log-driver option to set the log driver for created containers.
- The podman play kube command now supports a --start option, enabled by default, to start the pod after creating it. This allows for podman play kube to be more easily used in systemd unitfiles.
- The podman network create command now supports the --ipv6 option to enable dual-stack IPv6 networking for created networks (#7302).
- The podman inspect command can now inspect pods, networks, and volumes, in addition to containers and images (#6757).
- The --mount option for podman run and podman create now supports a new type, image, to mount the contents of an image into the container at a given location.
- The Bash and ZSH completions have been completely reworked and have received significant enhancements! Additionally, support for Fish completions and completions for the podman-remote executable have been added.
- The --log-opt option for podman create and podman run now supports the max-size option to set the maximum size for a container's logs (#7434).
- The --network option to the podman pod create command now allows pods to be configured to use slirp4netns networking, even when run as root (#6097).
- The podman pod stop, podman pod pause, podman pod unpause, and podman pod kill commands now work on multiple containers in parallel and should be significantly faster.
- The podman search command now supports a --list-tags option to list all available tags for a single image in a single repository.
- The podman search command can now output JSON using the --format=json option.
- The podman diff and podman mount commands now work with all containers in the storage library, including those not created by Podman. This allows them to be used with Buildah and CRI-O containers.
- The podman container exists command now features a --external option to check if a container exists not just in Podman, but also in the storage library. This will allow Podman to identify Buildah and CRI-O containers.
- The --tls-verify and --authfile options have been enabled for use with remote Podman.
- The /etc/hosts file now includes the container's name and hostname (both pointing to localhost) when the container is run with --net=none (#8095).
- The podman events command now supports filtering events based on the labels of the container they occurred on using the --filter label=key=value option.
- The podman volume ls command now supports filtering volumes based on their labels using the --filter label=key=value option.
- The --volume and --mount options to podman run and podman create now support two new mount propagation options, unbindable and runbindable.
- The name and id filters for podman pod ps now match based on a regular expression, instead of requiring an exact match.
- The podman pod ps command now supports a new filter status, that matches pods in a certain state.
* Changes
- The podman network rm --force command will now also remove pods that are using the network (#7791).
- The podman volume rm, podman network rm, and podman pod rm commands now return exit code 1 if the object specified for removal does not exist, and exit code 2 if the object is in use and the --force option was not given.
- If /dev/fuse is passed into Podman containers as a device, Podman will open it before starting the container to ensure that the kernel module is loaded on the host and the device is usable in the container.
- Global Podman options that were not supported with remote operation have been removed from podman-remote (e.g. --cgroup-manager, --storage-driver).
- Many errors have been changed to remove repetition and be more clear as to what has gone wrong.
- The --storage option to podman rm is now enabled by default, with slightly changed semantics. If the given container does not exist in Podman but does exist in the storage library, it will be removed even without the --storage option. If the container exists in Podman it will be removed normally. The --storage option for podman rm is now deprecated and will be removed in a future release.
- The --storage option to podman ps has been renamed to --external. An alias has been added so the old form of the option will continue to work.
- Podman now delays the SIGTERM and SIGINT signals during container creation to ensure that Podman is not stopped midway through creating a container resulting in potential resource leakage (#7941).
- The podman save command now strips signatures from images it is exporting, as the formats we export to do not support signatures (#7659).
- A new Degraded state has been added to pods. Pods that have some, but not all, of their containers running are now considered to be Degraded instead of Running.
- Podman will now print a warning when conflicting network options related to port forwarding (e.g. --publish and --net=host) are specified when creating a container.
- The --restart on-failure and --rm options for containers no longer conflict. When both are specified, the container will be restarted if it exits with a non-zero error code, and removed if it exits cleanly (#7906).
- Remote Podman will no longer use settings from the client's containers.conf; defaults will instead be provided by the server's containers.conf (#7657).
- The podman network rm command now has a new alias, podman network remove (#8402).
* Bugfixes
- Fixed a bug where podman load on the remote client did not error when attempting to load a directory, which is not yet supported for remote use.
- Fixed a bug where rootless Podman could hang when the newuidmap binary was not installed (#7776).
- Fixed a bug where the --pull option to podman run, podman create, and podman build did not match Docker's behavior.
- Fixed a bug where sysctl settings from the containers.conf configuration file were applied, even if the container did not join the namespace associated with a sysctl.
- Fixed a bug where Podman would not return the text of errors encounted when trying to run a healthcheck for a container.
- Fixed a bug where Podman was accidentally setting the containers environment variable in addition to the expected container environment variable.
- Fixed a bug where rootless Podman using CNI networking did not properly clean up DNS entries for removed containers (#7789).
- Fixed a bug where the podman untag --all command was not supported with remote Podman.
- Fixed a bug where the podman system service command could time out even if active attach connections were present (#7826).
- Fixed a bug where the podman system service command would sometimes never time out despite no active connections being present.
- Fixed a bug where Podman's handling of capabilities, specifically inheritable, did not match Docker's.
- Fixed a bug where podman run would fail if the image specified was a manifest list and had already been pulled (#7798).
- Fixed a bug where Podman did not take search registries into account when looking up images locally (#6381).
- Fixed a bug where the podman manifest inspect command would fail for images that had already been pulled (#7726).
- Fixed a bug where rootless Podman would not add supplemental GIDs to containers when when a user, but not a group, was set via the --user option to podman create and podman run and sufficient GIDs were available to add the groups (#7782).
- Fixed a bug where remote Podman commands did not properly handle cases where the user gave a name that could also be a short ID for a pod or container (#7837).
- Fixed a bug where podman image prune could leave images ready to be pruned after podman image prune was run (#7872).
- Fixed a bug where the podman logs command with the journald log driver would not read all available logs (#7476).
- Fixed a bug where the --rm and --restart options to podman create and podman run did not conflict when a restart policy that is not on-failure was chosen (#7878).
- Fixed a bug where the --format 'table {{ .Field }}' option to numerous Podman commands ceased to function on Podman v2.0 and up.
- Fixed a bug where pods did not properly share an SELinux label between their containers, resulting in containers being unable to see the processes of other containers when the pod shared a PID namespace (#7886).
- Fixed a bug where the --namespace option to podman ps did not work with the remote client (#7903).
- Fixed a bug where rootless Podman incorrectly calculated the number of UIDs available in the container if multiple different ranges of UIDs were specified.
- Fixed a bug where the /etc/hosts file would not be correctly populated for containers in a user namespace (#7490).
- Fixed a bug where the podman network create and podman network remove commands could race when run in parallel, with unpredictable results (#7807).
- Fixed a bug where the -p option to podman run, podman create, and podman pod create would, when given only a single number (e.g. -p 80), assign the same port for both host and container, instead of generating a random host port (#7947).
- Fixed a bug where Podman containers did not properly store the cgroup manager they were created with, causing them to stop functioning after the cgroup manager was changed in containers.conf or with the --cgroup-manager option (#7830).
- Fixed a bug where the podman inspect command did not include information on the CNI networks a container was connected to if it was not running.
- Fixed a bug where the podman attach command would not print a newline after detaching from the container (#7751).
- Fixed a bug where the HOME environment variable was not set properly in containers when the --userns=keep-id option was set (#8004).
- Fixed a bug where the podman container restore command could panic when the container in question was in a pod (#8026).
- Fixed a bug where the output of the podman image trust show --raw command was not properly formatted.
- Fixed a bug where the podman runlabel command could panic if a label to run was not given (#8038).
- Fixed a bug where the podman run and podman start --attach commands would exit with an error when the user detached manually using the detach keys on remote Podman (#7979).
- Fixed a bug where rootless CNI networking did not use the dnsname CNI plugin if it was not available on the host, despite it always being available in the container used for rootless networking (#8040).
- Fixed a bug where Podman did not properly handle cases where an OCI runtime is specified by its full path, and could revert to using another OCI runtime with the same binary path that existed in the system $PATH on subsequent invocations.
- Fixed a bug where the --net=host option to podman create and podman run would cause the /etc/hosts file to be incorrectly populated (#8054).
- Fixed a bug where the podman inspect command did not include container network information when the container shared its network namespace (IE, joined a pod or another container's network namespace via --net=container:...) (#8073).
- Fixed a bug where the podman ps command did not include information on all ports a container was publishing.
- Fixed a bug where the podman build command incorrectly forwarded STDIN into build containers from RUN instructions.
- Fixed a bug where the podman wait command's --interval option did not work when units were not specified for the duration (#8088).
- Fixed a bug where the --detach-keys and --detach options could be passed to podman create despite having no effect (and not making sense in that context).
- Fixed a bug where Podman could not start containers if running on a system without a /etc/resolv.conf file (which occurs on some WSL2 images) (#8089).
- Fixed a bug where the --extract option to podman cp was nonfunctional.
- Fixed a bug where the --cidfile option to podman run would, when the container was not run with --detach, only create the file after the container exited (#8091).
- Fixed a bug where the podman images and podman images -a commands could panic and not list any images when certain improperly-formatted images were present in storage (#8148).
- Fixed a bug where the podman events command could, when the journald events backend was in use, become nonfunctional when a badly-formatted event or a log message that container certain string was present in the journal (#8125).
- Fixed a bug where remote Podman would, when using SSH transport, not authenticate to the server using hostkeys when connecting on a port other than 22 (#8139).
- Fixed a bug where the podman attach command would not exit when containers stopped (#8154).
- Fixed a bug where Podman did not properly clean paths before verifying them, resulting in Podman refusing to start if the root or temporary directories were specified with extra trailing / characters (#8160).
- Fixed a bug where remote Podman did not support hashed hostnames in the known_hosts file on the host for establishing connections (#8159).
- Fixed a bug where the podman image exists command would return non-zero (false) when multiple potential matches for the given name existed.
- Fixed a bug where the podman manifest inspect command on images that are not manifest lists would error instead of inspecting the image (#8023).
- Fixed a bug where the podman system service command would fail if the directory the Unix socket was to be created inside did not exist (#8184).
- Fixed a bug where pods that shared the IPC namespace (which is done by default) did not share a /dev/shm filesystem between all containers in the pod (#8181).
- Fixed a bug where filters passed to podman volume list were not inclusive (#6765).
- Fixed a bug where the podman volume create command would fail when the volume's data directory already existed (as might occur when a volume was not completely removed) (#8253).
- Fixed a bug where the podman run and podman create commands would deadlock when trying to create a container that mounted the same named volume at multiple locations (e.g. podman run -v testvol:/test1 -v testvol:/test2) (#8221).
- Fixed a bug where the parsing of the --net option to podman build was incorrect (#8322).
- Fixed a bug where the podman build command would print the ID of the built image twice when using remote Podman (#8332).
- Fixed a bug where the podman stats command did not show memory limits for containers (#8265).
- Fixed a bug where the podman pod inspect command printed the static MAC address of the pod in a non-human-readable format (#8386).
- Fixed a bug where the --tls-verify option of the podman play kube command had its logic inverted (false would enforce the use of TLS, true would disable it).
- Fixed a bug where the podman network rm command would error when trying to remove macvlan networks and rootless CNI networks (#8491).
- Fixed a bug where Podman was not setting sane defaults for missing XDG_ environment variables.
- Fixed a bug where remote Podman would check if volume paths to be mounted in the container existed on the host, not the server (#8473).
- Fixed a bug where the podman manifest create and podman manifest add commands on local images would drop any images in the manifest not pulled by the host.
- Fixed a bug where networks made by podman network create did not include the tuning plugin, and as such did not support setting custom MAC addresses (#8385).
- Fixed a bug where container healthchecks did not use $PATH when searching for the Podman executable to run the healthcheck.
- Fixed a bug where the --ip-range option to podman network create did not properly handle non-classful subnets when calculating the last usable IP for DHCP assignment (#8448).
- Fixed a bug where the podman container ps alias for podman ps was missing (#8445).
* API
- The Compat Create endpoint for Container has received a major refactor to share more code with the Libpod Create endpoint, and should be significantly more stable.
- A Compat endpoint for exporting multiple images at once, GET /images/get, has been added (#7950).
- The Compat Network Connect and Network Disconnect endpoints have been added.
- Endpoints that deal with image registries now support a X-Registry-Config header to specify registry authentication configuration.
- The Compat Create endpoint for images now properly supports specifying images by digest.
- The Libpod Build endpoint for images now supports an httpproxy query parameter which, if set to true, will forward the server's HTTP proxy settings into the build container for RUN instructions.
- The Libpod Untag endpoint for images will now remove all tags for the given image if no repository and tag are specified for removal.
- Fixed a bug where the Ping endpoint misspelled a header name (Libpod-Buildha-Version instead of Libpod-Buildah-Version).
- Fixed a bug where the Ping endpoint sent an extra newline at the end of its response where Docker did not.
- Fixed a bug where the Compat Logs endpoint for containers did not send a newline character after each log line.
- Fixed a bug where the Compat Logs endpoint for containers would mangle line endings to change newline characters to add a preceding carriage return (#7942).
- Fixed a bug where the Compat Inspect endpoint for Containers did not properly list the container's stop signal (#7917).
- Fixed a bug where the Compat Inspect endpoint for Containers formatted the container's create time incorrectly (#7860).
- Fixed a bug where the Compat Inspect endpoint for Containers did not include the container's Path, Args, and Restart Count.
- Fixed a bug where the Compat Inspect endpoint for Containers prefixed added and dropped capabilities with CAP_ (Docker does not do so).
- Fixed a bug where the Compat Info endpoint for the Engine did not include configured registries.
- Fixed a bug where the server could panic if a client closed a connection midway through an image pull (#7896).
- Fixed a bug where the Compat Create endpoint for volumes returned an error when a volume with the same name already existed, instead of succeeding with a 201 code (#7740).
- Fixed a bug where a client disconnecting from the Libpod or Compat events endpoints could result in the server using 100% CPU (#7946).
- Fixed a bug where the 'no such image' error message sent by the Compat Inspect endpoint for Images returned a 404 status code with an error that was improperly formatted for Docker compatibility.
- Fixed a bug where the Compat Create endpoint for networks did not properly set a default for the driver parameter if it was not provided by the client.
- Fixed a bug where the Compat Inspect endpoint for images did not populate the RootFS field of the response.
- Fixed a bug where the Compat Inspect endpoint for images would omit the ParentId field if the image had no parent, and the Created field if the image did not have a creation time.
- Fixed a bug where the Compat Remove endpoint for Networks did not support the Force query parameter.
- add dependency to timezone package or podman fails to build a
- Correct invalid use of %{_libexecdir} to ensure files should be in /usr/lib
SELinux support [jsc#SMO-15]
libseccomp was updated to release 2.5.3:
* Update the syscall table for Linux v5.15
* Fix issues with multiplexed syscalls on mipsel introduced in v2.5.2
* Document that seccomp_rule_add() may return -EACCES
Update to release 2.5.2
* Update the syscall table for Linux v5.14-rc7
* Add a function, get_notify_fd(), to the Python bindings to
get the nofication file descriptor.
* Consolidate multiplexed syscall handling for all
architectures into one location.
* Add multiplexed syscall support to PPC and MIPS
* The meaning of SECCOMP_IOCTL_NOTIF_ID_VALID changed within
the kernel. libseccomp's fd notification logic was modified
to support the kernel's previous and new usage of
SECCOMP_IOCTL_NOTIF_ID_VALID.
update to 2.5.1:
* Fix a bug where seccomp_load() could only be called once
* Change the notification fd handling to only request a notification fd if
* the filter has a _NOTIFY action
* Add documentation about SCMP_ACT_NOTIFY to the seccomp_add_rule(3) manpage
* Clarify the maintainers' GPG keys
Update to release 2.5.0
* Add support for the seccomp user notifications, see the
seccomp_notify_alloc(3), seccomp_notify_receive(3),
seccomp_notify_respond(3) manpages for more information
* Add support for new filter optimization approaches, including a balanced
tree optimization, see the SCMP_FLTATR_CTL_OPTIMIZE filter attribute for
more information
* Add support for the 64-bit RISC-V architecture
* Performance improvements when adding new rules to a filter thanks to the
use of internal shadow transactions and improved syscall lookup tables
* Properly document the libseccomp API return values and include them in the
stable API promise
* Improvements to the s390 and s390x multiplexed syscall handling
* Multiple fixes and improvements to the libseccomp manpages
* Moved from manually maintained syscall tables to an automatically generated
syscall table in CSV format
* Update the syscall tables to Linux v5.8.0-rc5
* Python bindings and build now default to Python 3.x
* Improvements to the tests have boosted code coverage to over 93%
Update to release 2.4.3
* Add list of authorized release signatures to README.md
* Fix multiplexing issue with s390/s390x shm* syscalls
* Remove the static flag from libseccomp tools compilation
* Add define for __SNR_ppoll
* Fix potential memory leak identified by clang in the
scmp_bpf_sim tool
Update to release 2.4.2
* Add support for io-uring related system calls
conmon was updated to version 2.0.30:
* Remove unreachable code path
* exit: report if the exit command was killed
* exit: fix race zombie reaper
* conn_sock: allow watchdog messages through the notify socket proxy
* seccomp: add support for seccomp notify
Update to version 2.0.29:
* Reset OOM score back to 0 for container runtime
* call functions registered with atexit on SIGTERM
* conn_sock: fix potential segfault
Update to version 2.0.27:
* Add CRI-O integration test GitHub action
* exec: don't fail on EBADFD
* close_fds: fix close of external fds
* Add arm64 static build binary
Update to version 2.0.26:
* conn_sock: do not fail on EAGAIN
* fix segfault from a double freed pointer
* Fix a bug where conmon could never spawn a container, because
a disagreement between the caller and itself on where the attach
socket was.
* improve --full-attach to ignore the socket-dir directly. that
means callers don't need to specify a socket dir at all (and
can remove it)
* add full-attach option to allow callers to not truncate a very
long path for the attach socket
* close only opened FDs
* set locale to inherit environment
Update to version 2.0.22:
* added man page
* attach: always chdir
* conn_sock: Explicitly free a heap-allocated string
* refactor I/O and add SD_NOTIFY proxy support
Update to version 2.0.21:
* protect against kill(-1)
* Makefile: enable debuginfo generation
* Remove go.sum file and add go.mod
* Fail if conmon config could not be written
* nix: remove double definition for e2fsprogs
* Speedup static build by utilizing CI cache on `/nix` folder
* Fix nix build for failing e2fsprogs tests
* test: fix CI
* Use Podman for building
libcontainers-common was updated to include:
- common 0.44.0
- image 5.16.0
- podman 3.3.1
- storage 1.36.0
(changes too long to list)
CVEs fixed: CVE-2020-14370,CVE-2020-15157,CVE-2021-20199,CVE-2021-20291,CVE-2021-3602
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:711-1
Released: Fri Mar 4 09:15:11 2022
Summary: Recommended update for sudo
Type: recommended
Severity: moderate
References: 1181703
This update for sudo fixes the following issues:
- Add support in the LDAP filter for negated users (jsc#SLE-20068)
- Restrict use of sudo -U other -l to people who have permission
to run commands as that user (bsc#1181703, jsc#SLE-22569)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:713-1
Released: Fri Mar 4 09:34:17 2022
Summary: Security update for expat
Type: security
Severity: important
References: 1196025,1196026,1196168,1196169,1196171,CVE-2022-25235,CVE-2022-25236,CVE-2022-25313,CVE-2022-25314,CVE-2022-25315
This update for expat fixes the following issues:
- CVE-2022-25236: Fixed possible namespace-separator characters insertion into namespace URIs (bsc#1196025).
- CVE-2022-25235: Fixed UTF-8 character validation in a certain context (bsc#1196026).
- CVE-2022-25313: Fixed stack exhaustion in build_model() via uncontrolled recursion (bsc#1196168).
- CVE-2022-25314: Fixed integer overflow in copyString (bsc#1196169).
- CVE-2022-25315: Fixed integer overflow in storeRawNames (bsc#1196171).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:717-1
Released: Fri Mar 4 09:45:20 2022
Summary: Security update for gnutls
Type: security
Severity: moderate
References: 1196167,CVE-2021-4209
This update for gnutls fixes the following issues:
- CVE-2021-4209: Fixed null pointer dereference in MD_UPDATE (bsc#1196167).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:720-1
Released: Fri Mar 4 10:20:28 2022
Summary: Security update for containerd
Type: security
Severity: moderate
References: 1196441,CVE-2022-23648
This update for containerd fixes the following issues:
- CVE-2022-23648: A specially-crafted image configuration could gain access to
read-only copies of arbitrary files and directories on the host (bsc#1196441).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:727-1
Released: Fri Mar 4 10:39:21 2022
Summary: Security update for libeconf, shadow and util-linux
Type: security
Severity: moderate
References: 1188507,1192954,1193632,1194976,CVE-2021-3995,CVE-2021-3996
This security update for libeconf, shadow and util-linux fix the following issues:
libeconf:
- Add libeconf to SLE-Module-Basesystem_15-SP3 because needed by 'util-linux' and 'shadow'
to fix autoyast handling of security related parameters (bsc#1192954, jsc#SLE-23384, jsc#SLE-23402)
Issues fixed in libeconf:
- Reading numbers with different bases (e.g. oktal) (bsc#1193632) (#157)
- Fixed different issues while writing string values to file.
- Writing comments to file too.
- Fixed crash while merging values.
- Added econftool cat option (#146)
- new API call: econf_readDirsHistory (showing ALL locations)
- new API call: econf_getPath (absolute path of the configuration file)
- Man pages libeconf.3 and econftool.8.
- Handling multiline strings.
- Added libeconf_ext which returns more information like
line_nr, comments, path of the configuration file,...
- Econftool, an command line interface for handling configuration
files.
- Generating HTML API documentation with doxygen.
- Improving error handling and semantic file check.
- Joining entries with the same key to one single entry if
env variable ECONF_JOIN_SAME_ENTRIES has been set.
shadow:
- The legacy code does not support /etc/login.defs.d used by YaST. Enable libeconf to
read it (bsc#1192954, jsc#SLE-23384, jsc#SLE-23402)
util-linux:
- The legacy code does not support /etc/login.defs.d used by YaST. Enable libeconf to
read it (bsc#1192954, jsc#SLE-23384, jsc#SLE-23402)
- Allow use of larger values for start sector to prevent `blockdev --report` aborting (bsc#1188507)
- Fixed `blockdev --report` using non-space characters as a field separator (bsc#1188507)
- CVE-2021-3995: Fixed unauthorized unmount in util-linux's libmount. (bsc#1194976)
- CVE-2021-3996: Fixed unauthorized unmount in util-linux's libmount. (bsc#1194976)
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:736-1
Released: Fri Mar 4 14:51:57 2022
Summary: Security update for vim
Type: security
Severity: important
References: 1190533,1190570,1191893,1192478,1192481,1193294,1193298,1194216,1194556,1195004,1195066,1195126,1195202,1195356,CVE-2021-3778,CVE-2021-3796,CVE-2021-3872,CVE-2021-3927,CVE-2021-3928,CVE-2021-3984,CVE-2021-4019,CVE-2021-4193,CVE-2021-46059,CVE-2022-0318,CVE-2022-0319,CVE-2022-0351,CVE-2022-0361,CVE-2022-0413
This update for vim fixes the following issues:
- CVE-2022-0318: Fixed heap-based buffer overflow (bsc#1195004).
- CVE-2021-3796: Fixed use-after-free in nv_replace() in normal.c (bsc#1190570).
- CVE-2021-3872: Fixed heap-based buffer overflow in win_redr_status() drawscreen.c (bsc#1191893).
- CVE-2021-3927: Fixed heap-based buffer overflow (bsc#1192481).
- CVE-2021-3928: Fixed stack-based buffer overflow (bsc#1192478).
- CVE-2021-4019: Fixed heap-based buffer overflow (bsc#1193294).
- CVE-2021-3984: Fixed illegal memory access when C-indenting could have led to heap buffer overflow (bsc#1193298).
- CVE-2021-3778: Fixed heap-based buffer overflow in regexp_nfa.c (bsc#1190533).
- CVE-2021-4193: Fixed out-of-bounds read (bsc#1194216).
- CVE-2021-46059: Fixed pointer dereference vulnerability via the vim_regexec_multi function at regexp.c (bsc#1194556).
- CVE-2022-0319: Fixded out-of-bounds read (bsc#1195066).
- CVE-2022-0351: Fixed uncontrolled recursion in eval7() (bsc#1195126).
- CVE-2022-0361: Fixed buffer overflow (bsc#1195126).
- CVE-2022-0413: Fixed use-after-free in src/ex_cmds.c (bsc#1195356).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:743-1
Released: Mon Mar 7 22:08:12 2022
Summary: Security update for cyrus-sasl
Type: security
Severity: important
References: 1194265,1196036,CVE-2022-24407
This update for cyrus-sasl fixes the following issues:
- CVE-2022-24407: Fixed SQL injection in sql_auxprop_store in plugins/sql.c (bsc#1196036).
The following non-security bugs were fixed:
- postfix: sasl authentication with password fails (bsc#1194265).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:760-1
Released: Tue Mar 8 19:06:23 2022
Summary: Security update for the Linux Kernel
Type: security
Severity: important
References: 1089644,1154353,1157038,1157923,1176447,1176940,1178134,1181147,1181588,1183872,1187716,1188404,1189126,1190812,1190972,1191580,1191655,1191741,1192210,1192483,1193096,1193233,1193243,1193787,1194163,1194967,1195012,1195081,1195286,1195352,1195378,1195506,1195516,1195543,1195668,1195701,1195798,1195799,1195823,1195908,1195928,1195947,1195957,1195995,1196195,1196235,1196339,1196373,1196400,1196403,1196516,1196584,1196585,1196601,1196612,1196776,CVE-2022-0001,CVE-2022-0002,CVE-2022-0492,CVE-2022-0516,CVE-2022-0847,CVE-2022-25375
The SUSE Linux Enterprise 15 SP3 kernel was updated to receive various security and bugfixes.
Transient execution side-channel attacks attacking the Branch History Buffer (BHB),
named 'Branch Target Injection' and 'Intra-Mode Branch History Injection' are now mitigated.
The following security bugs were fixed:
- CVE-2022-0001: Fixed Branch History Injection vulnerability (bsc#1191580).
- CVE-2022-0002: Fixed Intra-Mode Branch Target Injection vulnerability (bsc#1191580).
- CVE-2022-0847: Fixed a vulnerability were a local attackers could overwrite data in arbitrary (read-only) files (bsc#1196584).
- CVE-2022-25375: The RNDIS USB gadget lacks validation of the size of the RNDIS_MSG_SET command. Attackers can obtain sensitive information from kernel memory (bnc#1196235 ).
- CVE-2022-0492: Fixed a privilege escalation related to cgroups v1 release_agent feature, which allowed bypassing namespace isolation unexpectedly (bsc#1195543).
- CVE-2022-0516: Fixed missing check in ioctl related to KVM in s390 allows kernel memory read/write (bsc#1195516).
The following non-security bugs were fixed:
- ACPI/IORT: Check node revision for PMCG resources (git-fixes).
- ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks (git-fixes).
- ALSA: hda/realtek: Add quirk for ASUS GU603 (git-fixes).
- ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows (git-fixes).
- ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset) (git-fixes).
- ALSA: hda: Fix missing codec probe on Shenker Dock 15 (git-fixes).
- ALSA: hda: Fix regression on forced probe mask option (git-fixes).
- ASoC: Revert 'ASoC: mediatek: Check for error clk pointer' (git-fixes).
- ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw() (git-fixes).
- ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range() (git-fixes).
- ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() (git-fixes).
- ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx() (git-fixes).
- ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx() (git-fixes).
- Align s390 NVME target options with other architectures (bsc#1188404, jsc#SLE-22494).
- Drop PCI xgene patch that caused a regression for mxl4 (bsc#1195352)
- EDAC/xgene: Fix deferred probing (bsc#1178134).
- HID:Add support for UGTABLET WP5540 (git-fixes).
- IB/cma: Do not send IGMP leaves for sendonly Multicast groups (git-fixes).
- IB/hfi1: Fix AIP early init panic (jsc#SLE-13208).
- KVM: remember position in kvm->vcpus array (bsc#1190972 LTC#194674).
- NFSD: Fix the behavior of READ near OFFSET_MAX (bsc#1195957).
- PM: hibernate: Remove register_nosave_region_late() (git-fixes).
- PM: s2idle: ACPI: Fix wakeup interrupts handling (git-fixes).
- RDMA/cma: Use correct address when leaving multicast group (bsc#1181147).
- RDMA/core: Always release restrack object (git-fixes)
- RDMA/cxgb4: check for ipv6 address properly while destroying listener (git-fixes)
- RDMA/siw: Release xarray entry (git-fixes)
- RDMA/ucma: Protect mc during concurrent multicast leaves (bsc#1181147).
- USB: serial: ch341: add support for GW Instek USB2.0-Serial devices (git-fixes).
- USB: serial: cp210x: add CPI Bulk Coin Recycler id (git-fixes).
- USB: serial: cp210x: add NCR Retail IO box id (git-fixes).
- USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 (git-fixes).
- USB: serial: mos7840: remove duplicated 0xac24 device ID (git-fixes).
- USB: serial: option: add ZTE MF286D modem (git-fixes).
- ata: libata-core: Disable TRIM on M88V29 (git-fixes).
- ax25: improve the incomplete fix to avoid UAF and NPD bugs (git-fixes).
- blk-mq: always allow reserved allocation in hctx_may_queue (bsc#1193787).
- blk-mq: avoid to iterate over stale request (bsc#1193787).
- blk-mq: clear stale request in tags->rq before freeing one request pool (bsc#1193787).
- blk-mq: clearing flush request reference in tags->rqs (bsc#1193787).
- blk-mq: do not grab rq's refcount in blk_mq_check_expired() (bsc#1193787 git-fixes).
- blk-mq: fix is_flush_rq (bsc#1193787 git-fixes).
- blk-mq: fix kernel panic during iterating over flush request (bsc#1193787 git-fixes).
- blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter (bsc#1193787).
- blk-mq: mark flush request as IDLE in flush_end_io() (bsc#1193787).
- blk-tag: Hide spin_lock (bsc#1193787).
- block: avoid double io accounting for flush request (bsc#1193787).
- block: do not send a rezise udev event for hidden block device (bsc#1193096).
- block: mark flush request as IDLE when it is really finished (bsc#1193787).
- bonding: pair enable_port with slave_arr_updates (git-fixes).
- bpf: Adjust BTF log size limit (git-fixes).
- bpf: Disallow BPF_LOG_KERNEL log level for bpf(BPF_BTF_LOAD) (git-fixes).
- btrfs: check for missing device in btrfs_trim_fs (bsc#1195701).
- btrfs: check worker before need_preemptive_reclaim (bsc#1196195).
- btrfs: do not do preemptive flushing if the majority is global rsv (bsc#1196195).
- btrfs: do not include the global rsv size in the preemptive used amount (bsc#1196195).
- btrfs: handle preemptive delalloc flushing slightly differently (bsc#1196195).
- btrfs: make sure SB_I_VERSION does not get unset by remount (bsc#1192210).
- btrfs: only clamp the first time we have to start flushing (bsc#1196195).
- btrfs: only ignore delalloc if delalloc is much smaller than ordered (bsc#1196195).
- btrfs: reduce the preemptive flushing threshold to 90% (bsc#1196195).
- btrfs: take into account global rsv in need_preemptive_reclaim (bsc#1196195).
- btrfs: use the global rsv size in the preemptive thresh calculation (bsc#1196195).
- ceph: properly put ceph_string reference after async create attempt (bsc#1195798).
- ceph: set pool_ns in new inode layout for async creates (bsc#1195799).
- drm/amdgpu: fix logic inversion in check (git-fixes).
- drm/i915/gvt: Make DRM_I915_GVT depend on X86 (git-fixes).
- drm/i915/gvt: clean up kernel-doc in gtt.c (git-fixes).
- drm/i915/opregion: check port number bounds for SWSCI display power state (git-fixes).
- drm/i915: Correctly populate use_sagv_wm for all pipes (git-fixes).
- drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV (git-fixes).
- drm/panel: simple: Assign data from panel_dpi_probe() correctly (git-fixes).
- drm/radeon: Fix backlight control on iMac 12,1 (git-fixes).
- drm/rockchip: dw_hdmi: Do not leave clock enabled in error case (git-fixes).
- drm/rockchip: vop: Correct RK3399 VOP register fields (git-fixes).
- drm/vc4: hdmi: Allow DBLCLK modes even if horz timing is odd (git-fixes).
- drm: panel-orientation-quirks: Add quirk for the 1Netbook OneXPlayer (git-fixes).
- ext4: check for inconsistent extents between index and leaf block (bsc#1194163 bsc#1196339).
- ext4: check for out-of-order index extents in ext4_valid_extent_entries() (bsc#1194163 bsc#1196339).
- ext4: prevent partial update of the extent blocks (bsc#1194163 bsc#1196339).
- gve: Add RX context (bsc#1191655).
- gve: Add a jumbo-frame device option (bsc#1191655).
- gve: Add consumed counts to ethtool stats (bsc#1191655).
- gve: Add optional metadata descriptor type GVE_TXD_MTD (bsc#1191655).
- gve: Correct order of processing device options (bsc#1191655).
- gve: Fix GFP flags when allocing pages (git-fixes).
- gve: Fix off by one in gve_tx_timeout() (bsc#1191655).
- gve: Implement packet continuation for RX (bsc#1191655).
- gve: Implement suspend/resume/shutdown (bsc#1191655).
- gve: Move the irq db indexes out of the ntfy block struct (bsc#1191655).
- gve: Recording rx queue before sending to napi (bsc#1191655).
- gve: Recover from queue stall due to missed IRQ (bsc#1191655).
- gve: Update gve_free_queue_page_list signature (bsc#1191655).
- gve: Use kvcalloc() instead of kvzalloc() (bsc#1191655).
- gve: fix for null pointer dereference (bsc#1191655).
- gve: fix the wrong AdminQ buffer queue index check (bsc#1176940).
- gve: fix unmatched u64_stats_update_end() (bsc#1191655).
- gve: remove memory barrier around seqno (bsc#1191655).
- i2c: brcmstb: fix support for DSL and CM variants (git-fixes).
- i40e: Fix for failed to init adminq while VF reset (git-fixes).
- i40e: Fix issue when maximum queues is exceeded (git-fixes).
- i40e: Fix queues reservation for XDP (git-fixes).
- i40e: Increase delay to 1 s after global EMP reset (git-fixes).
- i40e: fix unsigned stat widths (git-fixes).
- ibmvnic: Allow queueing resets during probe (bsc#1196516 ltc#196391).
- ibmvnic: clear fop when retrying probe (bsc#1196516 ltc#196391).
- ibmvnic: complete init_done on transport events (bsc#1196516 ltc#196391).
- ibmvnic: define flush_reset_queue helper (bsc#1196516 ltc#196391).
- ibmvnic: do not release napi in __ibmvnic_open() (bsc#1195668 ltc#195811).
- ibmvnic: free reset-work-item when flushing (bsc#1196516 ltc#196391).
- ibmvnic: init init_done_rc earlier (bsc#1196516 ltc#196391).
- ibmvnic: initialize rc before completing wait (bsc#1196516 ltc#196391).
- ibmvnic: register netdev after init of adapter (bsc#1196516 ltc#196391).
- ibmvnic: schedule failover only if vioctl fails (bsc#1196400 ltc#195815).
- ice: fix IPIP and SIT TSO offload (git-fixes).
- ice: fix an error code in ice_cfg_phy_fec() (jsc#SLE-12878).
- ima: Allow template selection with ima_template[_fmt]= after ima_hash= (git-fixes).
- ima: Do not print policy rule with inactive LSM labels (git-fixes).
- ima: Remove ima_policy file before directory (git-fixes).
- integrity: Make function integrity_add_key() static (git-fixes).
- integrity: check the return value of audit_log_start() (git-fixes).
- integrity: double check iint_cache was initialized (git-fixes).
- iommu/amd: Fix loop timeout issue in iommu_ga_log_enable() (git-fixes).
- iommu/amd: Remove useless irq affinity notifier (git-fixes).
- iommu/amd: Restore GA log/tail pointer on host resume (git-fixes).
- iommu/amd: X2apic mode: mask/unmask interrupts on suspend/resume (git-fixes).
- iommu/amd: X2apic mode: re-enable after resume (git-fixes).
- iommu/amd: X2apic mode: setup the INTX registers on mask/unmask (git-fixes).
- iommu/io-pgtable-arm-v7s: Add error handle for page table allocation failure (git-fixes).
- iommu/io-pgtable-arm: Fix table descriptor paddr formatting (git-fixes).
- iommu/iova: Fix race between FQ timeout and teardown (git-fixes).
- iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() (git-fixes).
- iwlwifi: fix use-after-free (git-fixes).
- iwlwifi: pcie: fix locking when 'HW not ready' (git-fixes).
- iwlwifi: pcie: gen2: fix locking when 'HW not ready' (git-fixes).
- ixgbevf: Require large buffers for build_skb on 82599VF (git-fixes).
- kABI fixup after adding vcpu_idx to struct kvm_cpu (bsc#1190972 LTC#194674).
- kABI: Fix kABI for AMD IOMMU driver (git-fixes).
- kabi: Hide changes to s390/AP structures (jsc#SLE-20807).
- lib/iov_iter: initialize 'flags' in new pipe_buffer (bsc#1196584).
- libsubcmd: Fix use-after-free for realloc(..., 0) (git-fixes).
- md/raid5: fix oops during stripe resizing (bsc#1181588).
- misc: fastrpc: avoid double fput() on failed usercopy (git-fixes).
- mmc: sdhci-of-esdhc: Check for error num after setting mask (git-fixes).
- mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status (git-fixes).
- mtd: rawnand: gpmi: do not leak PM reference in error path (git-fixes).
- mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe() (git-fixes).
- net/ibmvnic: Cleanup workaround doing an EOI after partition migration (bsc#1089644 ltc#166495 ltc#165544 git-fixes).
- net/mlx5e: Fix handling of wrong devices during bond netevent (jsc#SLE-15172).
- net: macb: Align the dma and coherent dma masks (git-fixes).
- net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE (bsc#1176447).
- net: phy: marvell: Fix MDI-x polarity setting in 88e1118-compatible PHYs (git-fixes).
- net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs (git-fixes).
- net: phy: marvell: configure RGMII delays for 88E1118 (git-fixes).
- net: usb: qmi_wwan: Add support for Dell DW5829e (git-fixes).
- nfp: flower: fix ida_idx not being released (bsc#1154353).
- nfsd: allow delegation state ids to be revoked and then freed (bsc#1192483).
- nfsd: allow lock state ids to be revoked and then freed (bsc#1192483).
- nfsd: allow open state ids to be revoked and then freed (bsc#1192483).
- nfsd: do not admin-revoke NSv4.0 state ids (bsc#1192483).
- nfsd: prepare for supporting admin-revocation of state (bsc#1192483).
- nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts() (bsc#1195012).
- nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info (git-fixes).
- nvme: do not return an error from nvme_configure_metadata (git-fixes).
- nvme: let namespace probing continue for unsupported features (git-fixes).
- powerpc/64: Move paca allocation later in boot (bsc#1190812).
- powerpc/64s: Fix debugfs_simple_attr.cocci warnings (bsc#1157038 bsc#1157923 ltc#182612 git-fixes).
- powerpc/pseries/ddw: Revert 'Extend upper limit for huge DMA window for persistent memory' (bsc#1195995 ltc#196394).
- powerpc/pseries: read the lpar name from the firmware (bsc#1187716 ltc#193451).
- powerpc: Set crashkernel offset to mid of RMA region (bsc#1190812).
- powerpc: add link stack flush mitigation status in debugfs (bsc#1157038 bsc#1157923 ltc#182612 git-fixes).
- s390/AP: support new dynamic AP bus size limit (jsc#SLE-20807).
- s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant (git-fixes).
- s390/bpf: Fix optimizing out zero-extensions (git-fixes).
- s390/cio: make ccw_device_dma_* more robust (bsc#1193243 LTC#195549).
- s390/cio: verify the driver availability for path_event call (bsc#1195928 LTC#196418).
- s390/cpumf: Support for CPU Measurement Facility CSVN 7 (bsc#1195081 LTC#196088).
- s390/cpumf: Support for CPU Measurement Sampling Facility LS bit (bsc#1195081 LTC#196088).
- s390/pci: add s390_iommu_aperture kernel parameter (bsc#1193233 LTC#195540).
- s390/pci: move pseudo-MMIO to prevent MIO overlap (bsc#1194967 LTC#196028).
- s390/protvirt: fix error return code in uv_info_init() (jsc#SLE-22135).
- s390/sclp: fix Secure-IPL facility detection (bsc#1191741 LTC#194816).
- s390/uv: add prot virt guest/host indication files (jsc#SLE-22135).
- s390/uv: fix prot virt host indication compilation (jsc#SLE-22135).
- scsi: core: Add a new error code DID_TRANSPORT_MARGINAL in scsi.h (bsc#1195506).
- scsi: core: Add limitless cmd retry support (bsc#1195506).
- scsi: core: No retries on abort success (bsc#1195506).
- scsi: kABI fix for 'eh_should_retry_cmd' (bsc#1195506).
- scsi: lpfc: Add support for eh_should_retry_cmd() (bsc#1195506).
- scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop (bsc#1189126).
- scsi: qla2xxx: Add devids and conditionals for 28xx (bsc#1195823).
- scsi: qla2xxx: Add marginal path handling support (bsc#1195506).
- scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues (bsc#1195823).
- scsi: qla2xxx: Add qla2x00_async_done() for async routines (bsc#1195823).
- scsi: qla2xxx: Add retry for exec firmware (bsc#1195823).
- scsi: qla2xxx: Check for firmware dump already collected (bsc#1195823).
- scsi: qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters (bsc#1195823).
- scsi: qla2xxx: Fix device reconnect in loop topology (bsc#1195823).
- scsi: qla2xxx: Fix premature hw access after PCI error (bsc#1195823).
- scsi: qla2xxx: Fix scheduling while atomic (bsc#1195823).
- scsi: qla2xxx: Fix stuck session in gpdb (bsc#1195823).
- scsi: qla2xxx: Fix unmap of already freed sgl (bsc#1195823).
- scsi: qla2xxx: Fix warning for missing error code (bsc#1195823).
- scsi: qla2xxx: Fix warning message due to adisc being flushed (bsc#1195823).
- scsi: qla2xxx: Fix wrong FDMI data for 64G adapter (bsc#1195823).
- scsi: qla2xxx: Implement ref count for SRB (bsc#1195823).
- scsi: qla2xxx: Refactor asynchronous command initialization (bsc#1195823).
- scsi: qla2xxx: Remove a declaration (bsc#1195823).
- scsi: qla2xxx: Remove unused qla_sess_op_cmd_list from scsi_qla_host_t (bsc#1195823).
- scsi: qla2xxx: Return -ENOMEM if kzalloc() fails (bsc#1195823).
- scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair() (bsc#1195823).
- scsi: qla2xxx: Update version to 10.02.07.200-k (bsc#1195823).
- scsi: qla2xxx: Update version to 10.02.07.300-k (bsc#1195823).
- scsi: qla2xxx: edif: Fix clang warning (bsc#1195823).
- scsi: qla2xxx: edif: Fix inconsistent check of db_flags (bsc#1195823).
- scsi: qla2xxx: edif: Reduce connection thrash (bsc#1195823).
- scsi: qla2xxx: edif: Replace list_for_each_safe with list_for_each_entry_safe (bsc#1195823).
- scsi: qla2xxx: edif: Tweak trace message (bsc#1195823).
- scsi: scsi_transport_fc: Add a new rport state FC_PORTSTATE_MARGINAL (bsc#1195506).
- scsi: scsi_transport_fc: Add store capability to rport port_state in sysfs (bsc#1195506).
- scsi: target: iscsi: Fix cmd abort fabric stop race (bsc#1195286).
- scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices (bsc#1195378 LTC#196244).
- scsi_transport_fc: kabi fix blank out FC_PORTSTATE_MARGINAL (bsc#1195506).
- staging/fbtft: Fix backlight (git-fixes).
- staging: fbtft: Fix error path in fbtft_driver_module_init() (git-fixes).
- tracing: Do not inc err_log entry count if entry allocation fails (git-fixes).
- tracing: Dump stacktrace trigger to the corresponding instance (git-fixes).
- tracing: Fix smatch warning for null glob in event_hist_trigger_parse() (git-fixes).
- tracing: Have traceon and traceoff trigger honor the instance (git-fixes).
- tracing: Propagate is_signed to expression (git-fixes).
- usb: dwc2: Fix NULL qh in dwc2_queue_transaction (git-fixes).
- usb: dwc2: gadget: do not try to disable ep0 in dwc2_hsotg_suspend (git-fixes).
- usb: dwc3: do not set gadget->is_otg flag (git-fixes).
- usb: dwc3: gadget: Prevent core from processing stale TRBs (git-fixes).
- usb: f_fs: Fix use-after-free for epfile (git-fixes).
- usb: gadget: f_uac2: Define specific wTerminalType (git-fixes).
- usb: gadget: rndis: check size of RNDIS_MSG_SET command (git-fixes).
- usb: gadget: s3c: remove unused 'udc' variable (git-fixes).
- usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition (git-fixes).
- usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe() (git-fixes).
- usb: ulpi: Call of_node_put correctly (git-fixes).
- usb: ulpi: Move of_node_put to ulpi_dev_release (git-fixes).
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:771-1
Released: Wed Mar 9 09:27:07 2022
Summary: Recommended update for libseccomp
Type: recommended
Severity: moderate
References: 1196825
This update for libseccomp fixes the following issues:
- Check if we have NR_openat2, avoid using its definition when not
(bsc#1196825), this fixes build of systemd.
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:774-1
Released: Wed Mar 9 10:52:10 2022
Summary: Security update for tcpdump
Type: security
Severity: moderate
References: 1195825,CVE-2018-16301
This update for tcpdump fixes the following issues:
- CVE-2018-16301: Fixed segfault when handling large files (bsc#1195825).
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:775-1
Released: Wed Mar 9 12:55:03 2022
Summary: Recommended update for pciutils
Type: recommended
Severity: moderate
References: 1192862
This update for pciutils fixes the following issues:
- Report the theoretical speeds for PCIe 5.0 and 6.0 (bsc#1192862)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:787-1
Released: Thu Mar 10 11:20:13 2022
Summary: Recommended update for openldap2
Type: recommended
Severity: moderate
References:
This update for openldap2 fixes the following issue:
- restore CLDAP functionality in CLI tools (jsc#PM-3288)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:788-1
Released: Thu Mar 10 11:21:04 2022
Summary: Recommended update for libzypp, zypper
Type: recommended
Severity: moderate
References: 1195326
This update for libzypp, zypper fixes the following issues:
- Fix handling of redirected command in-/output (bsc#1195326)
This fixes delays at the end of zypper operations, where
zypper unintentionally waits for appdata plugin scripts to
complete.
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:789-1
Released: Thu Mar 10 11:22:05 2022
Summary: Recommended update for update-alternatives
Type: recommended
Severity: moderate
References: 1195654
This update for update-alternatives fixes the following issues:
- Break bash - update-alternatives cycle rewrite of '%post' in 'lua'. (bsc#1195654)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:792-1
Released: Thu Mar 10 11:58:18 2022
Summary: Recommended update for suse-build-key
Type: recommended
Severity: moderate
References: 1194845,1196494,1196495
This update for suse-build-key fixes the following issues:
- The old SUSE PTF key was extended, but also move it to suse_ptf_key_old.asc (as it is a DSA1024 key).
- Added a new SUSE PTF key with RSA2048 bit as suse_ptf_key.asc (bsc#1196494)
- Extended the expiry of SUSE Linux Enterprise 11 key (bsc#1194845)
- Added SUSE Container signing key in PEM format for use e.g. by cosign.
- The SUSE security key was replaced with 2022 edition (E-Mail usage only). (bsc#1196495)
The following package changes have been done:
- containerd-ctr-1.4.12-63.1 updated
- containerd-1.4.12-63.1 updated
- filesystem-15.0-11.5.1 updated
- kernel-default-5.3.18-150300.59.54.1 updated
- libaugeas0-1.10.1-3.5.1 updated
- libblkid1-2.36.2-150300.4.14.3 updated
- libeconf0-0.4.4+git20220104.962774f-150300.3.6.2 added
- libexpat1-2.2.5-3.15.1 updated
- libfdisk1-2.36.2-150300.4.14.3 updated
- libgnutls30-3.6.7-14.16.1 updated
- libldap-2_4-2-2.4.46-9.61.1 updated
- libldap-data-2.4.46-9.61.1 updated
- libmount1-2.36.2-150300.4.14.3 updated
- libpci3-3.5.6-150300.13.3.1 updated
- libsasl2-3-2.1.27-150300.4.6.1 updated
- libseccomp2-2.5.3-150300.10.8.1 updated
- libsmartcols1-2.36.2-150300.4.14.3 updated
- libuuid1-2.36.2-150300.4.14.3 updated
- libzypp-17.29.4-31.1 updated
- login_defs-4.8.1-150300.4.3.8 updated
- pciutils-3.5.6-150300.13.3.1 updated
- rsyslog-8.2106.0-4.22.1 updated
- shadow-4.8.1-150300.4.3.8 updated
- sudo-1.9.5p2-150300.3.3.1 updated
- supportutils-plugin-suse-public-cloud-1.0.6-3.9.1 updated
- suse-build-key-12.0-8.19.1 updated
- tcpdump-4.9.2-3.18.1 updated
- update-alternatives-1.19.0.4-4.3.1 updated
- util-linux-systemd-2.36.2-150300.4.14.2 updated
- util-linux-2.36.2-150300.4.14.3 updated
- vim-data-common-8.0.1568-5.17.1 updated
- vim-8.0.1568-5.17.1 updated
- zypper-1.14.51-27.1 updated
More information about the sle-updates
mailing list