SUSE-CU-2022:365-1: Security update of bci/openjdk-devel
sle-updates at lists.suse.com
sle-updates at lists.suse.com
Sat Mar 26 13:26:43 UTC 2022
SUSE Container Update Advisory: bci/openjdk-devel
-----------------------------------------------------------------
Container Advisory ID : SUSE-CU-2022:365-1
Container Tags : bci/openjdk-devel:11 , bci/openjdk-devel:11-14.40 , bci/openjdk-devel:latest
Container Release : 14.40
Severity : important
Type : security
References : 1099272 1115529 1128846 1162964 1172113 1172427 1173277 1174075
1174911 1180689 1181826 1182959 1187906 1190926 1194229 1194642
1195149 1195792 1195856 1196025 1196784 1197004 CVE-2020-14367
CVE-2022-25236
-----------------------------------------------------------------
The container bci/openjdk-devel was updated. The following patches have been included in this update:
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:844-1
Released: Tue Mar 15 11:33:57 2022
Summary: Security update for expat
Type: security
Severity: important
References: 1196025,1196784,CVE-2022-25236
This update for expat fixes the following issues:
- Fixed a regression caused by the patch for CVE-2022-25236 (bsc#1196784).
-----------------------------------------------------------------
Advisory ID: SUSE-SU-2022:845-1
Released: Tue Mar 15 11:40:52 2022
Summary: Security update for chrony
Type: security
Severity: moderate
References: 1099272,1115529,1128846,1162964,1172113,1173277,1174075,1174911,1180689,1181826,1187906,1190926,1194229,CVE-2020-14367
This update for chrony fixes the following issues:
Chrony was updated to 4.1, bringing features and bugfixes.
Update to 4.1
* Add support for NTS servers specified by IP address (matching
Subject Alternative Name in server certificate)
* Add source-specific configuration of trusted certificates
* Allow multiple files and directories with trusted certificates
* Allow multiple pairs of server keys and certificates
* Add copy option to server/pool directive
* Increase PPS lock limit to 40% of pulse interval
* Perform source selection immediately after loading dump files
* Reload dump files for addresses negotiated by NTS-KE server
* Update seccomp filter and add less restrictive level
* Restart ongoing name resolution on online command
* Fix dump files to not include uncorrected offset
* Fix initstepslew to accept time from own NTP clients
* Reset NTP address and port when no longer negotiated by NTS-KE
server
- Ensure the correct pool packages are installed for openSUSE
and SLE (bsc#1180689).
- Fix pool package dependencies, so that SLE prefers chrony-pool-suse
over chrony-pool-empty. (bsc#1194229)
- Enable syscallfilter unconditionally [bsc#1181826].
Update to 4.0
- Enhancements
- Add support for Network Time Security (NTS) authentication
- Add support for AES-CMAC keys (AES128, AES256) with Nettle
- Add authselectmode directive to control selection of
unauthenticated sources
- Add binddevice, bindacqdevice, bindcmddevice directives
- Add confdir directive to better support fragmented
configuration
- Add sourcedir directive and 'reload sources' command to
support dynamic NTP sources specified in files
- Add clockprecision directive
- Add dscp directive to set Differentiated Services Code Point
(DSCP)
- Add -L option to limit log messages by severity
- Add -p option to print whole configuration with included
files
- Add -U option to allow start under non-root user
- Allow maxsamples to be set to 1 for faster update with -q/-Q
option
- Avoid replacing NTP sources with sources that have
unreachable address
- Improve pools to repeat name resolution to get 'maxsources'
sources
- Improve source selection with trusted sources
- Improve NTP loop test to prevent synchronisation to itself
- Repeat iburst when NTP source is switched from offline state
to online
- Update clock synchronisation status and leap status more
frequently
- Update seccomp filter
- Add 'add pool' command
- Add 'reset sources' command to drop all measurements
- Add authdata command to print details about NTP
authentication
- Add selectdata command to print details about source
selection
- Add -N option and sourcename command to print original names
of sources
- Add -a option to some commands to print also unresolved
sources
- Add -k, -p, -r options to clients command to select, limit,
reset data
- Bug fixes
- Donât set interface for NTP responses to allow asymmetric
routing
- Handle RTCs that donât support interrupts
- Respond to command requests with correct address on
multihomed hosts
- Removed features
- Drop support for RIPEMD keys (RMD128, RMD160, RMD256, RMD320)
- Drop support for long (non-standard) MACs in NTPv4 packets
(chrony 2.x clients using non-MD5/SHA1 keys need to use
option 'version 3')
- Drop support for line editing with GNU Readline
- By default we don't write log files but log to journald, so
only recommend logrotate.
- Adjust and rename the sysconfig file, so that it matches the
expectations of chronyd.service (bsc#1173277).
Update to 3.5.1:
* Create new file when writing pidfile (CVE-2020-14367, bsc#1174911)
- Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075)
- Use iburst in the default pool statements to speed up initial
synchronisation (bsc#1172113).
Update to 3.5:
+ Add support for more accurate reading of PHC on Linux 5.0
+ Add support for hardware timestamping on interfaces with read-only timestamping configuration
+ Add support for memory locking and real-time priority on FreeBSD, NetBSD, Solaris
+ Update seccomp filter to work on more architectures
+ Validate refclock driver options
+ Fix bindaddress directive on FreeBSD
+ Fix transposition of hardware RX timestamp on Linux 4.13 and later
+ Fix building on non-glibc systems
- Fix location of helper script in chrony-dnssrv at .service
(bsc#1128846).
- Read runtime servers from /var/run/netconfig/chrony.servers to
fix bsc#1099272.
- Move chrony-helper to /usr/lib/chrony/helper, because there
should be no executables in /usr/share.
Update to version 3.4
* Enhancements
+ Add filter option to server/pool/peer directive
+ Add minsamples and maxsamples options to hwtimestamp directive
+ Add support for faster frequency adjustments in Linux 4.19
+ Change default pidfile to /var/run/chrony/chronyd.pid to allow chronyd
without root privileges to remove it on exit
+ Disable sub-second polling intervals for distant NTP sources
+ Extend range of supported sub-second polling intervals
+ Get/set IPv4 destination/source address of NTP packets on FreeBSD
+ Make burst options and command useful with short polling intervals
+ Modify auto_offline option to activate when sending request failed
+ Respond from interface that received NTP request if possible
+ Add onoffline command to switch between online and offline state
according to current system network configuration
+ Improve example NetworkManager dispatcher script
* Bug fixes
+ Avoid waiting in Linux getrandom system call
+ Fix PPS support on FreeBSD and NetBSD
Update to version 3.3
* Enhancements:
+ Add burst option to server/pool directive
+ Add stratum and tai options to refclock directive
+ Add support for Nettle crypto library
+ Add workaround for missing kernel receive timestamps on Linux
+ Wait for late hardware transmit timestamps
+ Improve source selection with unreachable sources
+ Improve protection against replay attacks on symmetric mode
+ Allow PHC refclock to use socket in /var/run/chrony
+ Add shutdown command to stop chronyd
+ Simplify format of response to manual list command
+ Improve handling of unknown responses in chronyc
* Bug fixes:
+ Respond to NTPv1 client requests with zero mode
+ Fix -x option to not require CAP_SYS_TIME under non-root user
+ Fix acquisitionport directive to work with privilege separation
+ Fix handling of socket errors on Linux to avoid high CPU usage
+ Fix chronyc to not get stuck in infinite loop after clock step
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:861-1
Released: Tue Mar 15 23:30:48 2022
Summary: Recommended update for openssl-1_1
Type: recommended
Severity: moderate
References: 1182959,1195149,1195792,1195856
This update for openssl-1_1 fixes the following issues:
openssl-1_1:
- Fix PAC pointer authentication in ARM (bsc#1195856)
- Pull libopenssl-1_1 when updating openssl-1_1 with the same version (bsc#1195792)
- FIPS: Fix function and reason error codes (bsc#1182959)
- Enable zlib compression support (bsc#1195149)
glibc:
- Resolve installation issue of `glibc-devel` in SUSE Linux Enterprise Micro 5.1
linux-glibc-devel:
- Resolve installation issue of `linux-kernel-headers` in SUSE Linux Enterprise Micro 5.1
libxcrypt:
- Resolve installation issue of `libxcrypt-devel` in SUSE Linux Enterprise Micro 5.1
zlib:
- Resolve installation issue of `zlib-devel` in SUSE Linux Enterprise Micro 5.1
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:874-1
Released: Wed Mar 16 10:40:52 2022
Summary: Recommended update for openldap2
Type: recommended
Severity: moderate
References: 1197004
This update for openldap2 fixes the following issue:
- Revert jsc#PM-3288 - CLDAP ( -DLDAP_CONNECTIONLESS ) due to regression (bsc#1197004)
-----------------------------------------------------------------
Advisory ID: SUSE-RU-2022:905-1
Released: Mon Mar 21 08:46:09 2022
Summary: Recommended update for util-linux
Type: recommended
Severity: important
References: 1172427,1194642
This update for util-linux fixes the following issues:
- Prevent root owning of `/var/lib/libuuid/clock.txt`. (bsc#1194642)
- Make uuidd lock state file usable and time based UUIDs safer. (bsc#1194642)
- Fix `su -s` bash completion. (bsc#1172427)
The following package changes have been done:
- glibc-2.31-150300.20.7 updated
- libaugeas0-1.10.1-3.9.1 updated
- libblkid1-2.36.2-150300.4.17.1 updated
- libcrypt1-4.4.15-150300.4.2.41 updated
- libexpat1-2.2.5-3.19.1 updated
- libfdisk1-2.36.2-150300.4.17.1 updated
- libldap-2_4-2-2.4.46-9.64.1 updated
- libldap-data-2.4.46-9.64.1 updated
- libmount1-2.36.2-150300.4.17.1 updated
- libopenssl1_1-hmac-1.1.1d-11.43.1 updated
- libopenssl1_1-1.1.1d-11.43.1 updated
- libsmartcols1-2.36.2-150300.4.17.1 updated
- libuuid1-2.36.2-150300.4.17.1 updated
- libz1-1.2.11-3.26.10 updated
- openssl-1_1-1.1.1d-11.43.1 updated
- util-linux-2.36.2-150300.4.17.1 updated
- container:openjdk-11-image-15.3.0-14.25 updated
More information about the sle-updates
mailing list