[sles-beta] SLES12 x86_64 RC1 installation on HP ProliantBlade 460cGen8 network does not work
urs.frey at post.ch
urs.frey at post.ch
Thu Aug 7 04:03:40 MDT 2014
Hi Pawel
>Thank you for reporting this.
>>I believe this has been already fixed in 0.6.1 version of wicked, but
>to be sure I would need to look into the logs of wickedd and
>wickedd-nanny.
>I think the logs attached to:
>Bug 890643 - wicked doesn't wait long enough on large networks
>(https://bugzilla.novell.com/show_bug.cgi?id=890643)
>already correspond to this issue, isn't it?
NO this is not the case, because these are the logfiles from LINUXRC from a server installation on VMware ESXi
>Otherwise could you please attach new logs as per instruction:
>
>‒ set DEBUG=all in /etc/sysconfig/network/config
>‒ systemctl restart wickedd
>‒ wicked --debug all ifup all # systemctl restart wicked
>‒ wicked ifstatus all > status.log
[cid:image006.png at 01CFB236.CDD10740]
>‒ wicked show-config > configs.log
[cid:image004.jpg at 01CFB237.9FD22AD0]
[cid:image005.jpg at 01CFB237.9FD22AD0]
>‒ journalctl -b -o short-iso > wicked.log
>
>Thank you.
>
>P.S. If you are willing to re-test with wicked 0.6.1, I can provide you
>with the RPMs. Just tell me...
Because I cannot get the network running at all, there is no way to get logfiles out of the system
I would really like to send you the logs requested, but any idea to get the network running?
This is from grep wicked /var/log/messages.
You can only see, that wicked somehow
[cid:image003.png at 01CFB237.3A5FB550]
This is from ipup eth0 in wicked debug mode
[cid:image008.png at 01CFB237.9FD22AD0]
Best regards
Urs Frey
Post CH AG
Informationstechnologie
IT Betrieb
Webergutstrasse 12
3030 Bern (Zollikofen)
Telefon : ++41 (0)58 338 58 70
FAX : ++41 (0)58 667 30 07
E-Mail: urs.frey at post.ch
-----Ursprüngliche Nachricht-----
Von: sles-beta-bounces at lists.suse.com [mailto:sles-beta-bounces at lists.suse.com] Im Auftrag von Pawel Wieczorkiewicz
Gesendet: Thursday, August 07, 2014 7:39 AM
An: sles-beta at lists.suse.com
Betreff: Re: [sles-beta] SLES12 x86_64 RC1 installation on HP ProliantBlade 460cGen8 network does not work
On Wed, 6 Aug 2014 13:42:30 +0000
<urs.frey at post.ch<mailto:urs.frey at post.ch>> wrote:
> Hi
> When installing SLES12 x86_64 on HP Proliangt Blade BL460c-Gen8 using
> the boot parameters ipv4=1 ipv6=0 ipv4only, the installation does
> work, but afterwards the network is dead
>
> # wicked ifstatus eth0 does show me the following
>
> [cid:image001.png at 01CFB18C.6B748590]
>
> Somehow the static network configuration does not get applied
> [cid:image002.png at 01CFB18C.6B748590]
>
> So in my mind there is a bug again with wicked preventing my server
> from having network connection
>
> The device is known, but it is not taken. Wicked takes eth0 as
> unknown device [cid:image003.png at 01CFB18D.04417EE0]
>
> I am really not happy about this, because the installation did work
> perfectly under SLES12 Beta9, with this configuration and
> autoinst.xml It also works best under SLES11-SP3
>
> regards
>
> Urs Frey
> Post CH AG
> Informationstechnologie
> IT Betrieb
> Webergutstrasse 12
> 3030 Bern (Zollikofen)
> Telefon : ++41 (0)58 338 58 70
> FAX : ++41 (0)58 667 30 07
> E-Mail: urs.frey at post.ch<mailto:urs.frey at post.ch<mailto:urs.frey at post.ch%3cmailto:urs.frey at post.ch>>
>
>
Hi,
Thank you for reporting this.
I believe this has been already fixed in 0.6.1 version of wicked, but
to be sure I would need to look into the logs of wickedd and
wickedd-nanny.
I think the logs attached to:
Bug 890643 - wicked doesn't wait long enough on large networks
(https://bugzilla.novell.com/show_bug.cgi?id=890643)
already correspond to this issue, isn't it?
Otherwise could you please attach new logs as per instruction:
‒ set DEBUG=all in /etc/sysconfig/network/config
‒ systemctl restart wickedd
‒ wicked --debug all ifup all # systemctl restart wicked
‒ wicked ifstatus all > status.log
‒ wicked show-config > configs.log
‒ journalctl -b -o short-iso > wicked.log
Thank you.
P.S. If you are willing to re-test with wicked 0.6.1, I can provide you
with the RPMs. Just tell me...
--
Best Regards,
Pawel Wieczorkiewicz <pwieczorkiewicz at suse.de<mailto:pwieczorkiewicz at suse.de>>, Linux System Developer
SUSE LINUX Products GmbH
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG
Nürnberg) Maxfeldstr. 5 / D-90409 Nürnberg / Phone: +49-911-740 53 - 613
_______________________________________________
sles-beta mailing list
sles-beta at lists.suse.com<mailto:sles-beta at lists.suse.com>
http://lists.suse.com/mailman/listinfo/sles-beta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20140807/d71f4182/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 72198 bytes
Desc: image006.png
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20140807/d71f4182/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 528380 bytes
Desc: image003.png
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20140807/d71f4182/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 97834 bytes
Desc: image004.jpg
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20140807/d71f4182/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 63940 bytes
Desc: image005.jpg
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20140807/d71f4182/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.png
Type: image/png
Size: 258112 bytes
Desc: image008.png
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20140807/d71f4182/attachment-0002.png>
More information about the sles-beta
mailing list