[sles-beta] Odd happenings in the register with RC2 to RC3 update

[Waite, Dick (External)]

Grand Saturday Afternoon Thorsten,

It's quite interesting.

rjw02-12-1-4 lives on IPv4 192.168.2.124

When using RC2 (version 0.2.24) of SUSEConnect with -r thekey -e name at sag --url https://scc.suse.com you can register and as you say one is given a node name, as shown on the attached png's

You then power off and switch to point to RC3 .iso. IPL and set for Update...

The update potters along and then it tries to access the local registry, not found, then goes home to mum (scc.suse.com) and you get a message, something like:
"updating to RC3"
this runs for a bit and when done, one has a look at the browser, the node name has gone and we have an IP 192.168.2.124 which is the IP of Node rjw02-12-1-4.

If you look at the version of SUSEConnect on RC3 it's 0.2.27 so there has been changes. So it seems the issue is in the RC2 to RC3 update when it calls home to mum. The system does show the same hostname at RC2 and RC3.

So I'll run some --de-registers of the IP's and register again with the nodes. I expect the two extra modules I need would have been lost / kept, whatever it's soon fixed.

I'm sure at GMC update time this little quirk will be well booted into touch and are node will hang on in there.

Wishing you a grand Halloween.

__R



________________________________________
From: sles-beta-bounces at lists.suse.com [sles-beta-bounces at lists.suse.com] on behalf of Thorsten Kukuk [kukuk at suse.de]
Sent: 30 October 2015 11:29
To: sles-beta at lists.suse.com
Subject: Re: [sles-beta] Odd happenings in the register with RC2 to RC3 update

On Fri, Oct 30, Waite, Dick (External) wrote:

> Grand New Friday People,
>
> I updated some more of my QE systems to RC3 early today and these systems also pop back into the register with IP numbers and not node names (Hostname).

I spoke with our SCC developers, there was no change.
When the system at the moment of registration has a hostname set, this
gets send to SCC. Else we fall back to the ipv4 address.

When and how are you doing the registration?
And if you do it today again with RC2, you still see node names?

  Thorsten

--
Thorsten Kukuk, Senior Architect SLES & Common Code Base
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nuernberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nürnberg)
_______________________________________________
sles-beta mailing list
sles-beta at lists.suse.com
http://lists.suse.com/mailman/listinfo/sles-beta

Software AG – Sitz/Registered office: Uhlandstraße 12, 64297 Darmstadt, Germany – Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/Management Board: Karl-Heinz Streibich (Vorsitzender/Chairman), Eric Duffaut, Dr. Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2015-10-31_15h29_08.png
Type: image/png
Size: 209633 bytes
Desc: 2015-10-31_15h29_08.png
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20151031/8fc0688b/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2015-10-31_15h31_18.png
Type: image/png
Size: 200217 bytes
Desc: 2015-10-31_15h31_18.png
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20151031/8fc0688b/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2015-10-31_15h36_24.png
Type: image/png
Size: 200375 bytes
Desc: 2015-10-31_15h36_24.png
URL: <http://lists.suse.com/mailman/private/sles-beta/attachments/20151031/8fc0688b/attachment-0002.png>